1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2013 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
29 #ifndef _E1000E_80003ES2LAN_H_
30 #define _E1000E_80003ES2LAN_H_
32 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
33 #define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
34 #define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
35 #define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
37 #define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
38 #define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
39 #define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
41 #define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
42 #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
43 #define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
45 #define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
46 #define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
48 #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */
49 #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
51 #define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
52 #define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
54 /* GG82563 PHY Specific Status Register (Page 0, Register 16 */
55 #define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */
56 #define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
57 #define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
58 #define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
59 #define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
61 /* PHY Specific Control Register 2 (Page 0, Register 26) */
62 #define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */
64 /* MAC Specific Control Register (Page 2, Register 21) */
65 /* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
66 #define GG82563_MSCR_TX_CLK_MASK 0x0007
67 #define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
68 #define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
69 #define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
71 #define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
73 /* DSP Distance Register (Page 5, Register 26)
80 #define GG82563_DSPD_CABLE_LENGTH 0x0007
82 /* Kumeran Mode Control Register (Page 193, Register 16) */
83 #define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
85 /* Max number of times Kumeran read/write should be validated */
86 #define GG82563_MAX_KMRN_RETRY 0x5
88 /* Power Management Control Register (Page 193, Register 20) */
89 /* 1=Enable SERDES Electrical Idle */
90 #define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
92 /* In-Band Control Register (Page 194, Register 18) */
93 #define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */