2 * Copyright (c) 2005-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include <linux/pci.h>
19 #include <linux/module.h>
20 #include <linux/interrupt.h>
21 #include <linux/spinlock.h>
26 #include "targaddrs.h"
35 unsigned int ath10k_target_ps
;
36 module_param(ath10k_target_ps
, uint
, 0644);
37 MODULE_PARM_DESC(ath10k_target_ps
, "Enable ath10k Target (SoC) PS option");
39 #define QCA988X_1_0_DEVICE_ID (0xabcd)
40 #define QCA988X_2_0_DEVICE_ID (0x003c)
42 static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table
) = {
43 { PCI_VDEVICE(ATHEROS
, QCA988X_1_0_DEVICE_ID
) }, /* PCI-E QCA988X V1 */
44 { PCI_VDEVICE(ATHEROS
, QCA988X_2_0_DEVICE_ID
) }, /* PCI-E QCA988X V2 */
48 static int ath10k_pci_diag_read_access(struct ath10k
*ar
, u32 address
,
51 static void ath10k_pci_process_ce(struct ath10k
*ar
);
52 static int ath10k_pci_post_rx(struct ath10k
*ar
);
53 static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info
*pipe_info
,
55 static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info
*pipe_info
);
56 static void ath10k_pci_stop_ce(struct ath10k
*ar
);
58 static const struct ce_attr host_ce_config_wlan
[] = {
59 /* host->target HTC control and raw streams */
60 { /* CE0 */ CE_ATTR_FLAGS
, 0, 16, 256, 0, NULL
,},
61 /* could be moved to share CE3 */
62 /* target->host HTT + HTC control */
63 { /* CE1 */ CE_ATTR_FLAGS
, 0, 0, 512, 512, NULL
,},
64 /* target->host WMI */
65 { /* CE2 */ CE_ATTR_FLAGS
, 0, 0, 2048, 32, NULL
,},
66 /* host->target WMI */
67 { /* CE3 */ CE_ATTR_FLAGS
, 0, 32, 2048, 0, NULL
,},
68 /* host->target HTT */
69 { /* CE4 */ CE_ATTR_FLAGS
| CE_ATTR_DIS_INTR
, 0,
70 CE_HTT_H2T_MSG_SRC_NENTRIES
, 256, 0, NULL
,},
72 { /* CE5 */ CE_ATTR_FLAGS
, 0, 0, 0, 0, NULL
,},
73 /* Target autonomous hif_memcpy */
74 { /* CE6 */ CE_ATTR_FLAGS
, 0, 0, 0, 0, NULL
,},
75 /* ce_diag, the Diagnostic Window */
76 { /* CE7 */ CE_ATTR_FLAGS
, 0, 2, DIAG_TRANSFER_LIMIT
, 2, NULL
,},
79 /* Target firmware's Copy Engine configuration. */
80 static const struct ce_pipe_config target_ce_config_wlan
[] = {
81 /* host->target HTC control and raw streams */
82 { /* CE0 */ 0, PIPEDIR_OUT
, 32, 256, CE_ATTR_FLAGS
, 0,},
83 /* target->host HTT + HTC control */
84 { /* CE1 */ 1, PIPEDIR_IN
, 32, 512, CE_ATTR_FLAGS
, 0,},
85 /* target->host WMI */
86 { /* CE2 */ 2, PIPEDIR_IN
, 32, 2048, CE_ATTR_FLAGS
, 0,},
87 /* host->target WMI */
88 { /* CE3 */ 3, PIPEDIR_OUT
, 32, 2048, CE_ATTR_FLAGS
, 0,},
89 /* host->target HTT */
90 { /* CE4 */ 4, PIPEDIR_OUT
, 256, 256, CE_ATTR_FLAGS
, 0,},
91 /* NB: 50% of src nentries, since tx has 2 frags */
93 { /* CE5 */ 5, PIPEDIR_OUT
, 32, 2048, CE_ATTR_FLAGS
, 0,},
94 /* Reserved for target autonomous hif_memcpy */
95 { /* CE6 */ 6, PIPEDIR_INOUT
, 32, 4096, CE_ATTR_FLAGS
, 0,},
96 /* CE7 used only by Host */
100 * Diagnostic read/write access is provided for startup/config/debug usage.
101 * Caller must guarantee proper alignment, when applicable, and single user
104 static int ath10k_pci_diag_read_mem(struct ath10k
*ar
, u32 address
, void *data
,
107 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
110 unsigned int completed_nbytes
, orig_nbytes
, remaining_bytes
;
113 struct ce_state
*ce_diag
;
114 /* Host buffer address in CE space */
116 dma_addr_t ce_data_base
= 0;
117 void *data_buf
= NULL
;
121 * This code cannot handle reads to non-memory space. Redirect to the
122 * register read fn but preserve the multi word read capability of
125 if (address
< DRAM_BASE_ADDRESS
) {
126 if (!IS_ALIGNED(address
, 4) ||
127 !IS_ALIGNED((unsigned long)data
, 4))
130 while ((nbytes
>= 4) && ((ret
= ath10k_pci_diag_read_access(
131 ar
, address
, (u32
*)data
)) == 0)) {
132 nbytes
-= sizeof(u32
);
133 address
+= sizeof(u32
);
139 ce_diag
= ar_pci
->ce_diag
;
142 * Allocate a temporary bounce buffer to hold caller's data
143 * to be DMA'ed from Target. This guarantees
144 * 1) 4-byte alignment
145 * 2) Buffer in DMA-able space
147 orig_nbytes
= nbytes
;
148 data_buf
= (unsigned char *)pci_alloc_consistent(ar_pci
->pdev
,
156 memset(data_buf
, 0, orig_nbytes
);
158 remaining_bytes
= orig_nbytes
;
159 ce_data
= ce_data_base
;
160 while (remaining_bytes
) {
161 nbytes
= min_t(unsigned int, remaining_bytes
,
162 DIAG_TRANSFER_LIMIT
);
164 ret
= ath10k_ce_recv_buf_enqueue(ce_diag
, NULL
, ce_data
);
168 /* Request CE to send from Target(!) address to Host buffer */
170 * The address supplied by the caller is in the
171 * Target CPU virtual address space.
173 * In order to use this address with the diagnostic CE,
174 * convert it from Target CPU virtual address space
175 * to CE address space
178 address
= TARG_CPU_SPACE_TO_CE_SPACE(ar
, ar_pci
->mem
,
180 ath10k_pci_sleep(ar
);
182 ret
= ath10k_ce_send(ce_diag
, NULL
, (u32
)address
, nbytes
, 0,
188 while (ath10k_ce_completed_send_next(ce_diag
, NULL
, &buf
,
192 if (i
++ > DIAG_ACCESS_CE_TIMEOUT_MS
) {
198 if (nbytes
!= completed_nbytes
) {
203 if (buf
!= (u32
) address
) {
209 while (ath10k_ce_completed_recv_next(ce_diag
, NULL
, &buf
,
214 if (i
++ > DIAG_ACCESS_CE_TIMEOUT_MS
) {
220 if (nbytes
!= completed_nbytes
) {
225 if (buf
!= ce_data
) {
230 remaining_bytes
-= nbytes
;
237 /* Copy data from allocated DMA buf to caller's buf */
238 WARN_ON_ONCE(orig_nbytes
& 3);
239 for (i
= 0; i
< orig_nbytes
/ sizeof(__le32
); i
++) {
241 __le32_to_cpu(((__le32
*)data_buf
)[i
]);
244 ath10k_dbg(ATH10K_DBG_PCI
, "%s failure (0x%x)\n",
248 pci_free_consistent(ar_pci
->pdev
, orig_nbytes
,
249 data_buf
, ce_data_base
);
254 /* Read 4-byte aligned data from Target memory or register */
255 static int ath10k_pci_diag_read_access(struct ath10k
*ar
, u32 address
,
258 /* Assume range doesn't cross this boundary */
259 if (address
>= DRAM_BASE_ADDRESS
)
260 return ath10k_pci_diag_read_mem(ar
, address
, data
, sizeof(u32
));
263 *data
= ath10k_pci_read32(ar
, address
);
264 ath10k_pci_sleep(ar
);
268 static int ath10k_pci_diag_write_mem(struct ath10k
*ar
, u32 address
,
269 const void *data
, int nbytes
)
271 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
274 unsigned int completed_nbytes
, orig_nbytes
, remaining_bytes
;
277 struct ce_state
*ce_diag
;
278 void *data_buf
= NULL
;
279 u32 ce_data
; /* Host buffer address in CE space */
280 dma_addr_t ce_data_base
= 0;
283 ce_diag
= ar_pci
->ce_diag
;
286 * Allocate a temporary bounce buffer to hold caller's data
287 * to be DMA'ed to Target. This guarantees
288 * 1) 4-byte alignment
289 * 2) Buffer in DMA-able space
291 orig_nbytes
= nbytes
;
292 data_buf
= (unsigned char *)pci_alloc_consistent(ar_pci
->pdev
,
300 /* Copy caller's data to allocated DMA buf */
301 WARN_ON_ONCE(orig_nbytes
& 3);
302 for (i
= 0; i
< orig_nbytes
/ sizeof(__le32
); i
++)
303 ((__le32
*)data_buf
)[i
] = __cpu_to_le32(((u32
*)data
)[i
]);
306 * The address supplied by the caller is in the
307 * Target CPU virtual address space.
309 * In order to use this address with the diagnostic CE,
311 * Target CPU virtual address space
316 address
= TARG_CPU_SPACE_TO_CE_SPACE(ar
, ar_pci
->mem
, address
);
317 ath10k_pci_sleep(ar
);
319 remaining_bytes
= orig_nbytes
;
320 ce_data
= ce_data_base
;
321 while (remaining_bytes
) {
322 /* FIXME: check cast */
323 nbytes
= min_t(int, remaining_bytes
, DIAG_TRANSFER_LIMIT
);
325 /* Set up to receive directly into Target(!) address */
326 ret
= ath10k_ce_recv_buf_enqueue(ce_diag
, NULL
, address
);
331 * Request CE to send caller-supplied data that
332 * was copied to bounce buffer to Target(!) address.
334 ret
= ath10k_ce_send(ce_diag
, NULL
, (u32
) ce_data
,
340 while (ath10k_ce_completed_send_next(ce_diag
, NULL
, &buf
,
345 if (i
++ > DIAG_ACCESS_CE_TIMEOUT_MS
) {
351 if (nbytes
!= completed_nbytes
) {
356 if (buf
!= ce_data
) {
362 while (ath10k_ce_completed_recv_next(ce_diag
, NULL
, &buf
,
367 if (i
++ > DIAG_ACCESS_CE_TIMEOUT_MS
) {
373 if (nbytes
!= completed_nbytes
) {
378 if (buf
!= address
) {
383 remaining_bytes
-= nbytes
;
390 pci_free_consistent(ar_pci
->pdev
, orig_nbytes
, data_buf
,
395 ath10k_dbg(ATH10K_DBG_PCI
, "%s failure (0x%x)\n", __func__
,
401 /* Write 4B data to Target memory or register */
402 static int ath10k_pci_diag_write_access(struct ath10k
*ar
, u32 address
,
405 /* Assume range doesn't cross this boundary */
406 if (address
>= DRAM_BASE_ADDRESS
)
407 return ath10k_pci_diag_write_mem(ar
, address
, &data
,
411 ath10k_pci_write32(ar
, address
, data
);
412 ath10k_pci_sleep(ar
);
416 static bool ath10k_pci_target_is_awake(struct ath10k
*ar
)
418 void __iomem
*mem
= ath10k_pci_priv(ar
)->mem
;
420 val
= ioread32(mem
+ PCIE_LOCAL_BASE_ADDRESS
+
422 return (RTC_STATE_V_GET(val
) == RTC_STATE_V_ON
);
425 static void ath10k_pci_wait(struct ath10k
*ar
)
429 while (n
-- && !ath10k_pci_target_is_awake(ar
))
433 ath10k_warn("Unable to wakeup target\n");
436 void ath10k_do_pci_wake(struct ath10k
*ar
)
438 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
439 void __iomem
*pci_addr
= ar_pci
->mem
;
443 if (atomic_read(&ar_pci
->keep_awake_count
) == 0) {
445 iowrite32(PCIE_SOC_WAKE_V_MASK
,
446 pci_addr
+ PCIE_LOCAL_BASE_ADDRESS
+
447 PCIE_SOC_WAKE_ADDRESS
);
449 atomic_inc(&ar_pci
->keep_awake_count
);
451 if (ar_pci
->verified_awake
)
455 if (ath10k_pci_target_is_awake(ar
)) {
456 ar_pci
->verified_awake
= true;
460 if (tot_delay
> PCIE_WAKE_TIMEOUT
) {
461 ath10k_warn("target takes too long to wake up (awake count %d)\n",
462 atomic_read(&ar_pci
->keep_awake_count
));
467 tot_delay
+= curr_delay
;
474 void ath10k_do_pci_sleep(struct ath10k
*ar
)
476 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
477 void __iomem
*pci_addr
= ar_pci
->mem
;
479 if (atomic_dec_and_test(&ar_pci
->keep_awake_count
)) {
481 ar_pci
->verified_awake
= false;
482 iowrite32(PCIE_SOC_WAKE_RESET
,
483 pci_addr
+ PCIE_LOCAL_BASE_ADDRESS
+
484 PCIE_SOC_WAKE_ADDRESS
);
489 * FIXME: Handle OOM properly.
492 struct ath10k_pci_compl
*get_free_compl(struct hif_ce_pipe_info
*pipe_info
)
494 struct ath10k_pci_compl
*compl = NULL
;
496 spin_lock_bh(&pipe_info
->pipe_lock
);
497 if (list_empty(&pipe_info
->compl_free
)) {
498 ath10k_warn("Completion buffers are full\n");
501 compl = list_first_entry(&pipe_info
->compl_free
,
502 struct ath10k_pci_compl
, list
);
503 list_del(&compl->list
);
505 spin_unlock_bh(&pipe_info
->pipe_lock
);
509 /* Called by lower (CE) layer when a send to Target completes. */
510 static void ath10k_pci_ce_send_done(struct ce_state
*ce_state
,
511 void *transfer_context
,
514 unsigned int transfer_id
)
516 struct ath10k
*ar
= ce_state
->ar
;
517 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
518 struct hif_ce_pipe_info
*pipe_info
= &ar_pci
->pipe_info
[ce_state
->id
];
519 struct ath10k_pci_compl
*compl;
520 bool process
= false;
524 * For the send completion of an item in sendlist, just
525 * increment num_sends_allowed. The upper layer callback will
526 * be triggered when last fragment is done with send.
528 if (transfer_context
== CE_SENDLIST_ITEM_CTXT
) {
529 spin_lock_bh(&pipe_info
->pipe_lock
);
530 pipe_info
->num_sends_allowed
++;
531 spin_unlock_bh(&pipe_info
->pipe_lock
);
535 compl = get_free_compl(pipe_info
);
539 compl->send_or_recv
= HIF_CE_COMPLETE_SEND
;
540 compl->ce_state
= ce_state
;
541 compl->pipe_info
= pipe_info
;
542 compl->transfer_context
= transfer_context
;
543 compl->nbytes
= nbytes
;
544 compl->transfer_id
= transfer_id
;
548 * Add the completion to the processing queue.
550 spin_lock_bh(&ar_pci
->compl_lock
);
551 list_add_tail(&compl->list
, &ar_pci
->compl_process
);
552 spin_unlock_bh(&ar_pci
->compl_lock
);
555 } while (ath10k_ce_completed_send_next(ce_state
,
561 * If only some of the items within a sendlist have completed,
562 * don't invoke completion processing until the entire sendlist
568 ath10k_pci_process_ce(ar
);
571 /* Called by lower (CE) layer when data is received from the Target. */
572 static void ath10k_pci_ce_recv_data(struct ce_state
*ce_state
,
573 void *transfer_context
, u32 ce_data
,
575 unsigned int transfer_id
,
578 struct ath10k
*ar
= ce_state
->ar
;
579 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
580 struct hif_ce_pipe_info
*pipe_info
= &ar_pci
->pipe_info
[ce_state
->id
];
581 struct ath10k_pci_compl
*compl;
585 compl = get_free_compl(pipe_info
);
589 compl->send_or_recv
= HIF_CE_COMPLETE_RECV
;
590 compl->ce_state
= ce_state
;
591 compl->pipe_info
= pipe_info
;
592 compl->transfer_context
= transfer_context
;
593 compl->nbytes
= nbytes
;
594 compl->transfer_id
= transfer_id
;
595 compl->flags
= flags
;
597 skb
= transfer_context
;
598 dma_unmap_single(ar
->dev
, ATH10K_SKB_CB(skb
)->paddr
,
599 skb
->len
+ skb_tailroom(skb
),
602 * Add the completion to the processing queue.
604 spin_lock_bh(&ar_pci
->compl_lock
);
605 list_add_tail(&compl->list
, &ar_pci
->compl_process
);
606 spin_unlock_bh(&ar_pci
->compl_lock
);
608 } while (ath10k_ce_completed_recv_next(ce_state
,
614 ath10k_pci_process_ce(ar
);
617 /* Send the first nbytes bytes of the buffer */
618 static int ath10k_pci_hif_send_head(struct ath10k
*ar
, u8 pipe_id
,
619 unsigned int transfer_id
,
620 unsigned int bytes
, struct sk_buff
*nbuf
)
622 struct ath10k_skb_cb
*skb_cb
= ATH10K_SKB_CB(nbuf
);
623 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
624 struct hif_ce_pipe_info
*pipe_info
= &(ar_pci
->pipe_info
[pipe_id
]);
625 struct ce_state
*ce_hdl
= pipe_info
->ce_hdl
;
626 struct ce_sendlist sendlist
;
631 memset(&sendlist
, 0, sizeof(struct ce_sendlist
));
633 len
= min(bytes
, nbuf
->len
);
637 ath10k_warn("skb not aligned to 4-byte boundary (%d)\n", len
);
639 ath10k_dbg(ATH10K_DBG_PCI
,
640 "pci send data vaddr %p paddr 0x%llx len %d as %d bytes\n",
641 nbuf
->data
, (unsigned long long) skb_cb
->paddr
,
643 ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP
, NULL
,
645 nbuf
->data
, nbuf
->len
);
647 ath10k_ce_sendlist_buf_add(&sendlist
, skb_cb
->paddr
, len
, flags
);
649 /* Make sure we have resources to handle this request */
650 spin_lock_bh(&pipe_info
->pipe_lock
);
651 if (!pipe_info
->num_sends_allowed
) {
652 ath10k_warn("Pipe: %d is full\n", pipe_id
);
653 spin_unlock_bh(&pipe_info
->pipe_lock
);
656 pipe_info
->num_sends_allowed
--;
657 spin_unlock_bh(&pipe_info
->pipe_lock
);
659 ret
= ath10k_ce_sendlist_send(ce_hdl
, nbuf
, &sendlist
, transfer_id
);
661 ath10k_warn("CE send failed: %p\n", nbuf
);
666 static u16
ath10k_pci_hif_get_free_queue_number(struct ath10k
*ar
, u8 pipe
)
668 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
669 struct hif_ce_pipe_info
*pipe_info
= &(ar_pci
->pipe_info
[pipe
]);
672 spin_lock_bh(&pipe_info
->pipe_lock
);
673 ret
= pipe_info
->num_sends_allowed
;
674 spin_unlock_bh(&pipe_info
->pipe_lock
);
679 static void ath10k_pci_hif_dump_area(struct ath10k
*ar
)
681 u32 reg_dump_area
= 0;
682 u32 reg_dump_values
[REG_DUMP_COUNT_QCA988X
] = {};
687 ath10k_err("firmware crashed!\n");
688 ath10k_err("hardware name %s version 0x%x\n",
689 ar
->hw_params
.name
, ar
->target_version
);
690 ath10k_err("firmware version: %u.%u.%u.%u\n", ar
->fw_version_major
,
691 ar
->fw_version_minor
, ar
->fw_version_release
,
692 ar
->fw_version_build
);
694 host_addr
= host_interest_item_address(HI_ITEM(hi_failure_state
));
695 if (ath10k_pci_diag_read_mem(ar
, host_addr
,
696 ®_dump_area
, sizeof(u32
)) != 0) {
697 ath10k_warn("could not read hi_failure_state\n");
701 ath10k_err("target register Dump Location: 0x%08X\n", reg_dump_area
);
703 ret
= ath10k_pci_diag_read_mem(ar
, reg_dump_area
,
705 REG_DUMP_COUNT_QCA988X
* sizeof(u32
));
707 ath10k_err("could not dump FW Dump Area\n");
711 BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X
% 4);
713 ath10k_err("target Register Dump\n");
714 for (i
= 0; i
< REG_DUMP_COUNT_QCA988X
; i
+= 4)
715 ath10k_err("[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n",
718 reg_dump_values
[i
+ 1],
719 reg_dump_values
[i
+ 2],
720 reg_dump_values
[i
+ 3]);
723 static void ath10k_pci_hif_send_complete_check(struct ath10k
*ar
, u8 pipe
,
729 * Decide whether to actually poll for completions, or just
730 * wait for a later chance.
731 * If there seem to be plenty of resources left, then just wait
732 * since checking involves reading a CE register, which is a
733 * relatively expensive operation.
735 resources
= ath10k_pci_hif_get_free_queue_number(ar
, pipe
);
738 * If at least 50% of the total resources are still available,
739 * don't bother checking again yet.
741 if (resources
> (host_ce_config_wlan
[pipe
].src_nentries
>> 1))
744 ath10k_ce_per_engine_service(ar
, pipe
);
747 static void ath10k_pci_hif_post_init(struct ath10k
*ar
,
748 struct ath10k_hif_cb
*callbacks
)
750 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
752 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
754 memcpy(&ar_pci
->msg_callbacks_current
, callbacks
,
755 sizeof(ar_pci
->msg_callbacks_current
));
758 static int ath10k_pci_start_ce(struct ath10k
*ar
)
760 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
761 struct ce_state
*ce_diag
= ar_pci
->ce_diag
;
762 const struct ce_attr
*attr
;
763 struct hif_ce_pipe_info
*pipe_info
;
764 struct ath10k_pci_compl
*compl;
765 int i
, pipe_num
, completions
, disable_interrupts
;
767 spin_lock_init(&ar_pci
->compl_lock
);
768 INIT_LIST_HEAD(&ar_pci
->compl_process
);
770 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
771 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
773 spin_lock_init(&pipe_info
->pipe_lock
);
774 INIT_LIST_HEAD(&pipe_info
->compl_free
);
776 /* Handle Diagnostic CE specially */
777 if (pipe_info
->ce_hdl
== ce_diag
)
780 attr
= &host_ce_config_wlan
[pipe_num
];
783 if (attr
->src_nentries
) {
784 disable_interrupts
= attr
->flags
& CE_ATTR_DIS_INTR
;
785 ath10k_ce_send_cb_register(pipe_info
->ce_hdl
,
786 ath10k_pci_ce_send_done
,
788 completions
+= attr
->src_nentries
;
789 pipe_info
->num_sends_allowed
= attr
->src_nentries
- 1;
792 if (attr
->dest_nentries
) {
793 ath10k_ce_recv_cb_register(pipe_info
->ce_hdl
,
794 ath10k_pci_ce_recv_data
);
795 completions
+= attr
->dest_nentries
;
798 if (completions
== 0)
801 for (i
= 0; i
< completions
; i
++) {
802 compl = kmalloc(sizeof(struct ath10k_pci_compl
),
805 ath10k_warn("No memory for completion state\n");
806 ath10k_pci_stop_ce(ar
);
810 compl->send_or_recv
= HIF_CE_COMPLETE_FREE
;
811 list_add_tail(&compl->list
, &pipe_info
->compl_free
);
818 static void ath10k_pci_stop_ce(struct ath10k
*ar
)
820 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
821 struct ath10k_pci_compl
*compl;
825 ath10k_ce_disable_interrupts(ar
);
827 /* Cancel the pending tasklet */
828 tasklet_kill(&ar_pci
->intr_tq
);
830 for (i
= 0; i
< CE_COUNT
; i
++)
831 tasklet_kill(&ar_pci
->pipe_info
[i
].intr
);
833 /* Mark pending completions as aborted, so that upper layers free up
834 * their associated resources */
835 spin_lock_bh(&ar_pci
->compl_lock
);
836 list_for_each_entry(compl, &ar_pci
->compl_process
, list
) {
837 skb
= (struct sk_buff
*)compl->transfer_context
;
838 ATH10K_SKB_CB(skb
)->is_aborted
= true;
840 spin_unlock_bh(&ar_pci
->compl_lock
);
843 static void ath10k_pci_cleanup_ce(struct ath10k
*ar
)
845 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
846 struct ath10k_pci_compl
*compl, *tmp
;
847 struct hif_ce_pipe_info
*pipe_info
;
848 struct sk_buff
*netbuf
;
851 /* Free pending completions. */
852 spin_lock_bh(&ar_pci
->compl_lock
);
853 if (!list_empty(&ar_pci
->compl_process
))
854 ath10k_warn("pending completions still present! possible memory leaks.\n");
856 list_for_each_entry_safe(compl, tmp
, &ar_pci
->compl_process
, list
) {
857 list_del(&compl->list
);
858 netbuf
= (struct sk_buff
*)compl->transfer_context
;
859 dev_kfree_skb_any(netbuf
);
862 spin_unlock_bh(&ar_pci
->compl_lock
);
864 /* Free unused completions for each pipe. */
865 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
866 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
868 spin_lock_bh(&pipe_info
->pipe_lock
);
869 list_for_each_entry_safe(compl, tmp
,
870 &pipe_info
->compl_free
, list
) {
871 list_del(&compl->list
);
874 spin_unlock_bh(&pipe_info
->pipe_lock
);
878 static void ath10k_pci_process_ce(struct ath10k
*ar
)
880 struct ath10k_pci
*ar_pci
= ar
->hif
.priv
;
881 struct ath10k_hif_cb
*cb
= &ar_pci
->msg_callbacks_current
;
882 struct ath10k_pci_compl
*compl;
885 int ret
, send_done
= 0;
887 /* Upper layers aren't ready to handle tx/rx completions in parallel so
888 * we must serialize all completion processing. */
890 spin_lock_bh(&ar_pci
->compl_lock
);
891 if (ar_pci
->compl_processing
) {
892 spin_unlock_bh(&ar_pci
->compl_lock
);
895 ar_pci
->compl_processing
= true;
896 spin_unlock_bh(&ar_pci
->compl_lock
);
899 spin_lock_bh(&ar_pci
->compl_lock
);
900 if (list_empty(&ar_pci
->compl_process
)) {
901 spin_unlock_bh(&ar_pci
->compl_lock
);
904 compl = list_first_entry(&ar_pci
->compl_process
,
905 struct ath10k_pci_compl
, list
);
906 list_del(&compl->list
);
907 spin_unlock_bh(&ar_pci
->compl_lock
);
909 if (compl->send_or_recv
== HIF_CE_COMPLETE_SEND
) {
910 cb
->tx_completion(ar
,
911 compl->transfer_context
,
915 ret
= ath10k_pci_post_rx_pipe(compl->pipe_info
, 1);
917 ath10k_warn("Unable to post recv buffer for pipe: %d\n",
918 compl->pipe_info
->pipe_num
);
922 skb
= (struct sk_buff
*)compl->transfer_context
;
923 nbytes
= compl->nbytes
;
925 ath10k_dbg(ATH10K_DBG_PCI
,
926 "ath10k_pci_ce_recv_data netbuf=%p nbytes=%d\n",
928 ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP
, NULL
,
929 "ath10k rx: ", skb
->data
, nbytes
);
931 if (skb
->len
+ skb_tailroom(skb
) >= nbytes
) {
933 skb_put(skb
, nbytes
);
934 cb
->rx_completion(ar
, skb
,
935 compl->pipe_info
->pipe_num
);
937 ath10k_warn("rxed more than expected (nbytes %d, max %d)",
939 skb
->len
+ skb_tailroom(skb
));
943 compl->send_or_recv
= HIF_CE_COMPLETE_FREE
;
946 * Add completion back to the pipe's free list.
948 spin_lock_bh(&compl->pipe_info
->pipe_lock
);
949 list_add_tail(&compl->list
, &compl->pipe_info
->compl_free
);
950 compl->pipe_info
->num_sends_allowed
+= send_done
;
951 spin_unlock_bh(&compl->pipe_info
->pipe_lock
);
954 spin_lock_bh(&ar_pci
->compl_lock
);
955 ar_pci
->compl_processing
= false;
956 spin_unlock_bh(&ar_pci
->compl_lock
);
959 /* TODO - temporary mapping while we have too few CE's */
960 static int ath10k_pci_hif_map_service_to_pipe(struct ath10k
*ar
,
961 u16 service_id
, u8
*ul_pipe
,
962 u8
*dl_pipe
, int *ul_is_polled
,
967 /* polling for received messages not supported */
970 switch (service_id
) {
971 case ATH10K_HTC_SVC_ID_HTT_DATA_MSG
:
973 * Host->target HTT gets its own pipe, so it can be polled
974 * while other pipes are interrupt driven.
978 * Use the same target->host pipe for HTC ctrl, HTC raw
984 case ATH10K_HTC_SVC_ID_RSVD_CTRL
:
985 case ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS
:
987 * Note: HTC_RAW_STREAMS_SVC is currently unused, and
988 * HTC_CTRL_RSVD_SVC could share the same pipe as the
989 * WMI services. So, if another CE is needed, change
990 * this to *ul_pipe = 3, which frees up CE 0.
997 case ATH10K_HTC_SVC_ID_WMI_DATA_BK
:
998 case ATH10K_HTC_SVC_ID_WMI_DATA_BE
:
999 case ATH10K_HTC_SVC_ID_WMI_DATA_VI
:
1000 case ATH10K_HTC_SVC_ID_WMI_DATA_VO
:
1002 case ATH10K_HTC_SVC_ID_WMI_CONTROL
:
1008 /* pipe 6 reserved */
1009 /* pipe 7 reserved */
1016 (host_ce_config_wlan
[*ul_pipe
].flags
& CE_ATTR_DIS_INTR
) != 0;
1021 static void ath10k_pci_hif_get_default_pipe(struct ath10k
*ar
,
1022 u8
*ul_pipe
, u8
*dl_pipe
)
1024 int ul_is_polled
, dl_is_polled
;
1026 (void)ath10k_pci_hif_map_service_to_pipe(ar
,
1027 ATH10K_HTC_SVC_ID_RSVD_CTRL
,
1034 static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info
*pipe_info
,
1037 struct ath10k
*ar
= pipe_info
->hif_ce_state
;
1038 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1039 struct ce_state
*ce_state
= pipe_info
->ce_hdl
;
1040 struct sk_buff
*skb
;
1044 if (pipe_info
->buf_sz
== 0)
1047 for (i
= 0; i
< num
; i
++) {
1048 skb
= dev_alloc_skb(pipe_info
->buf_sz
);
1050 ath10k_warn("could not allocate skbuff for pipe %d\n",
1056 WARN_ONCE((unsigned long)skb
->data
& 3, "unaligned skb");
1058 ce_data
= dma_map_single(ar
->dev
, skb
->data
,
1059 skb
->len
+ skb_tailroom(skb
),
1062 if (unlikely(dma_mapping_error(ar
->dev
, ce_data
))) {
1063 ath10k_warn("could not dma map skbuff\n");
1064 dev_kfree_skb_any(skb
);
1069 ATH10K_SKB_CB(skb
)->paddr
= ce_data
;
1071 pci_dma_sync_single_for_device(ar_pci
->pdev
, ce_data
,
1073 PCI_DMA_FROMDEVICE
);
1075 ret
= ath10k_ce_recv_buf_enqueue(ce_state
, (void *)skb
,
1078 ath10k_warn("could not enqueue to pipe %d (%d)\n",
1087 ath10k_pci_rx_pipe_cleanup(pipe_info
);
1091 static int ath10k_pci_post_rx(struct ath10k
*ar
)
1093 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1094 struct hif_ce_pipe_info
*pipe_info
;
1095 const struct ce_attr
*attr
;
1096 int pipe_num
, ret
= 0;
1098 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
1099 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
1100 attr
= &host_ce_config_wlan
[pipe_num
];
1102 if (attr
->dest_nentries
== 0)
1105 ret
= ath10k_pci_post_rx_pipe(pipe_info
,
1106 attr
->dest_nentries
- 1);
1108 ath10k_warn("Unable to replenish recv buffers for pipe: %d\n",
1111 for (; pipe_num
>= 0; pipe_num
--) {
1112 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
1113 ath10k_pci_rx_pipe_cleanup(pipe_info
);
1122 static int ath10k_pci_hif_start(struct ath10k
*ar
)
1124 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1127 ret
= ath10k_pci_start_ce(ar
);
1129 ath10k_warn("could not start CE (%d)\n", ret
);
1133 /* Post buffers once to start things off. */
1134 ret
= ath10k_pci_post_rx(ar
);
1136 ath10k_warn("could not post rx pipes (%d)\n", ret
);
1140 ar_pci
->started
= 1;
1144 static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info
*pipe_info
)
1147 struct ath10k_pci
*ar_pci
;
1148 struct ce_state
*ce_hdl
;
1150 struct sk_buff
*netbuf
;
1153 buf_sz
= pipe_info
->buf_sz
;
1155 /* Unused Copy Engine */
1159 ar
= pipe_info
->hif_ce_state
;
1160 ar_pci
= ath10k_pci_priv(ar
);
1162 if (!ar_pci
->started
)
1165 ce_hdl
= pipe_info
->ce_hdl
;
1167 while (ath10k_ce_revoke_recv_next(ce_hdl
, (void **)&netbuf
,
1169 dma_unmap_single(ar
->dev
, ATH10K_SKB_CB(netbuf
)->paddr
,
1170 netbuf
->len
+ skb_tailroom(netbuf
),
1172 dev_kfree_skb_any(netbuf
);
1176 static void ath10k_pci_tx_pipe_cleanup(struct hif_ce_pipe_info
*pipe_info
)
1179 struct ath10k_pci
*ar_pci
;
1180 struct ce_state
*ce_hdl
;
1181 struct sk_buff
*netbuf
;
1183 unsigned int nbytes
;
1187 buf_sz
= pipe_info
->buf_sz
;
1189 /* Unused Copy Engine */
1193 ar
= pipe_info
->hif_ce_state
;
1194 ar_pci
= ath10k_pci_priv(ar
);
1196 if (!ar_pci
->started
)
1199 ce_hdl
= pipe_info
->ce_hdl
;
1201 while (ath10k_ce_cancel_send_next(ce_hdl
, (void **)&netbuf
,
1202 &ce_data
, &nbytes
, &id
) == 0) {
1203 if (netbuf
!= CE_SENDLIST_ITEM_CTXT
)
1205 * Indicate the completion to higer layer to free
1208 ATH10K_SKB_CB(netbuf
)->is_aborted
= true;
1209 ar_pci
->msg_callbacks_current
.tx_completion(ar
,
1216 * Cleanup residual buffers for device shutdown:
1217 * buffers that were enqueued for receive
1218 * buffers that were to be sent
1219 * Note: Buffers that had completed but which were
1220 * not yet processed are on a completion queue. They
1221 * are handled when the completion thread shuts down.
1223 static void ath10k_pci_buffer_cleanup(struct ath10k
*ar
)
1225 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1228 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
1229 struct hif_ce_pipe_info
*pipe_info
;
1231 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
1232 ath10k_pci_rx_pipe_cleanup(pipe_info
);
1233 ath10k_pci_tx_pipe_cleanup(pipe_info
);
1237 static void ath10k_pci_ce_deinit(struct ath10k
*ar
)
1239 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1240 struct hif_ce_pipe_info
*pipe_info
;
1243 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
1244 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
1245 if (pipe_info
->ce_hdl
) {
1246 ath10k_ce_deinit(pipe_info
->ce_hdl
);
1247 pipe_info
->ce_hdl
= NULL
;
1248 pipe_info
->buf_sz
= 0;
1253 static void ath10k_pci_hif_stop(struct ath10k
*ar
)
1255 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
1257 ath10k_pci_stop_ce(ar
);
1259 /* At this point, asynchronous threads are stopped, the target should
1260 * not DMA nor interrupt. We process the leftovers and then free
1261 * everything else up. */
1263 ath10k_pci_process_ce(ar
);
1264 ath10k_pci_cleanup_ce(ar
);
1265 ath10k_pci_buffer_cleanup(ar
);
1266 ath10k_pci_ce_deinit(ar
);
1269 static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k
*ar
,
1270 void *req
, u32 req_len
,
1271 void *resp
, u32
*resp_len
)
1273 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1274 struct ce_state
*ce_tx
= ar_pci
->pipe_info
[BMI_CE_NUM_TO_TARG
].ce_hdl
;
1275 struct ce_state
*ce_rx
= ar_pci
->pipe_info
[BMI_CE_NUM_TO_HOST
].ce_hdl
;
1276 dma_addr_t req_paddr
= 0;
1277 dma_addr_t resp_paddr
= 0;
1278 struct bmi_xfer xfer
= {};
1279 void *treq
, *tresp
= NULL
;
1282 if (resp
&& !resp_len
)
1285 if (resp
&& resp_len
&& *resp_len
== 0)
1288 treq
= kmemdup(req
, req_len
, GFP_KERNEL
);
1292 req_paddr
= dma_map_single(ar
->dev
, treq
, req_len
, DMA_TO_DEVICE
);
1293 ret
= dma_mapping_error(ar
->dev
, req_paddr
);
1297 if (resp
&& resp_len
) {
1298 tresp
= kzalloc(*resp_len
, GFP_KERNEL
);
1304 resp_paddr
= dma_map_single(ar
->dev
, tresp
, *resp_len
,
1306 ret
= dma_mapping_error(ar
->dev
, resp_paddr
);
1310 xfer
.wait_for_resp
= true;
1313 ath10k_ce_recv_buf_enqueue(ce_rx
, &xfer
, resp_paddr
);
1316 init_completion(&xfer
.done
);
1318 ret
= ath10k_ce_send(ce_tx
, &xfer
, req_paddr
, req_len
, -1, 0);
1322 ret
= wait_for_completion_timeout(&xfer
.done
,
1323 BMI_COMMUNICATION_TIMEOUT_HZ
);
1326 unsigned int unused_nbytes
;
1327 unsigned int unused_id
;
1330 ath10k_ce_cancel_send_next(ce_tx
, NULL
, &unused_buffer
,
1331 &unused_nbytes
, &unused_id
);
1333 /* non-zero means we did not time out */
1341 ath10k_ce_revoke_recv_next(ce_rx
, NULL
, &unused_buffer
);
1342 dma_unmap_single(ar
->dev
, resp_paddr
,
1343 *resp_len
, DMA_FROM_DEVICE
);
1346 dma_unmap_single(ar
->dev
, req_paddr
, req_len
, DMA_TO_DEVICE
);
1348 if (ret
== 0 && resp_len
) {
1349 *resp_len
= min(*resp_len
, xfer
.resp_len
);
1350 memcpy(resp
, tresp
, xfer
.resp_len
);
1359 static void ath10k_pci_bmi_send_done(struct ce_state
*ce_state
,
1360 void *transfer_context
,
1362 unsigned int nbytes
,
1363 unsigned int transfer_id
)
1365 struct bmi_xfer
*xfer
= transfer_context
;
1367 if (xfer
->wait_for_resp
)
1370 complete(&xfer
->done
);
1373 static void ath10k_pci_bmi_recv_data(struct ce_state
*ce_state
,
1374 void *transfer_context
,
1376 unsigned int nbytes
,
1377 unsigned int transfer_id
,
1380 struct bmi_xfer
*xfer
= transfer_context
;
1382 if (!xfer
->wait_for_resp
) {
1383 ath10k_warn("unexpected: BMI data received; ignoring\n");
1387 xfer
->resp_len
= nbytes
;
1388 complete(&xfer
->done
);
1392 * Map from service/endpoint to Copy Engine.
1393 * This table is derived from the CE_PCI TABLE, above.
1394 * It is passed to the Target at startup for use by firmware.
1396 static const struct service_to_pipe target_service_to_ce_map_wlan
[] = {
1398 ATH10K_HTC_SVC_ID_WMI_DATA_VO
,
1399 PIPEDIR_OUT
, /* out = UL = host -> target */
1403 ATH10K_HTC_SVC_ID_WMI_DATA_VO
,
1404 PIPEDIR_IN
, /* in = DL = target -> host */
1408 ATH10K_HTC_SVC_ID_WMI_DATA_BK
,
1409 PIPEDIR_OUT
, /* out = UL = host -> target */
1413 ATH10K_HTC_SVC_ID_WMI_DATA_BK
,
1414 PIPEDIR_IN
, /* in = DL = target -> host */
1418 ATH10K_HTC_SVC_ID_WMI_DATA_BE
,
1419 PIPEDIR_OUT
, /* out = UL = host -> target */
1423 ATH10K_HTC_SVC_ID_WMI_DATA_BE
,
1424 PIPEDIR_IN
, /* in = DL = target -> host */
1428 ATH10K_HTC_SVC_ID_WMI_DATA_VI
,
1429 PIPEDIR_OUT
, /* out = UL = host -> target */
1433 ATH10K_HTC_SVC_ID_WMI_DATA_VI
,
1434 PIPEDIR_IN
, /* in = DL = target -> host */
1438 ATH10K_HTC_SVC_ID_WMI_CONTROL
,
1439 PIPEDIR_OUT
, /* out = UL = host -> target */
1443 ATH10K_HTC_SVC_ID_WMI_CONTROL
,
1444 PIPEDIR_IN
, /* in = DL = target -> host */
1448 ATH10K_HTC_SVC_ID_RSVD_CTRL
,
1449 PIPEDIR_OUT
, /* out = UL = host -> target */
1450 0, /* could be moved to 3 (share with WMI) */
1453 ATH10K_HTC_SVC_ID_RSVD_CTRL
,
1454 PIPEDIR_IN
, /* in = DL = target -> host */
1458 ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS
, /* not currently used */
1459 PIPEDIR_OUT
, /* out = UL = host -> target */
1463 ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS
, /* not currently used */
1464 PIPEDIR_IN
, /* in = DL = target -> host */
1468 ATH10K_HTC_SVC_ID_HTT_DATA_MSG
,
1469 PIPEDIR_OUT
, /* out = UL = host -> target */
1473 ATH10K_HTC_SVC_ID_HTT_DATA_MSG
,
1474 PIPEDIR_IN
, /* in = DL = target -> host */
1478 /* (Additions here) */
1480 { /* Must be last */
1488 * Send an interrupt to the device to wake up the Target CPU
1489 * so it has an opportunity to notice any changed state.
1491 static int ath10k_pci_wake_target_cpu(struct ath10k
*ar
)
1496 ret
= ath10k_pci_diag_read_access(ar
, SOC_CORE_BASE_ADDRESS
|
1500 ath10k_warn("Unable to read core ctrl\n");
1504 /* A_INUM_FIRMWARE interrupt to Target CPU */
1505 core_ctrl
|= CORE_CTRL_CPU_INTR_MASK
;
1507 ret
= ath10k_pci_diag_write_access(ar
, SOC_CORE_BASE_ADDRESS
|
1511 ath10k_warn("Unable to set interrupt mask\n");
1516 static int ath10k_pci_init_config(struct ath10k
*ar
)
1518 u32 interconnect_targ_addr
;
1519 u32 pcie_state_targ_addr
= 0;
1520 u32 pipe_cfg_targ_addr
= 0;
1521 u32 svc_to_pipe_map
= 0;
1522 u32 pcie_config_flags
= 0;
1524 u32 ealloc_targ_addr
;
1526 u32 flag2_targ_addr
;
1529 /* Download to Target the CE Config and the service-to-CE map */
1530 interconnect_targ_addr
=
1531 host_interest_item_address(HI_ITEM(hi_interconnect_state
));
1533 /* Supply Target-side CE configuration */
1534 ret
= ath10k_pci_diag_read_access(ar
, interconnect_targ_addr
,
1535 &pcie_state_targ_addr
);
1537 ath10k_err("Failed to get pcie state addr: %d\n", ret
);
1541 if (pcie_state_targ_addr
== 0) {
1543 ath10k_err("Invalid pcie state addr\n");
1547 ret
= ath10k_pci_diag_read_access(ar
, pcie_state_targ_addr
+
1548 offsetof(struct pcie_state
,
1550 &pipe_cfg_targ_addr
);
1552 ath10k_err("Failed to get pipe cfg addr: %d\n", ret
);
1556 if (pipe_cfg_targ_addr
== 0) {
1558 ath10k_err("Invalid pipe cfg addr\n");
1562 ret
= ath10k_pci_diag_write_mem(ar
, pipe_cfg_targ_addr
,
1563 target_ce_config_wlan
,
1564 sizeof(target_ce_config_wlan
));
1567 ath10k_err("Failed to write pipe cfg: %d\n", ret
);
1571 ret
= ath10k_pci_diag_read_access(ar
, pcie_state_targ_addr
+
1572 offsetof(struct pcie_state
,
1576 ath10k_err("Failed to get svc/pipe map: %d\n", ret
);
1580 if (svc_to_pipe_map
== 0) {
1582 ath10k_err("Invalid svc_to_pipe map\n");
1586 ret
= ath10k_pci_diag_write_mem(ar
, svc_to_pipe_map
,
1587 target_service_to_ce_map_wlan
,
1588 sizeof(target_service_to_ce_map_wlan
));
1590 ath10k_err("Failed to write svc/pipe map: %d\n", ret
);
1594 ret
= ath10k_pci_diag_read_access(ar
, pcie_state_targ_addr
+
1595 offsetof(struct pcie_state
,
1597 &pcie_config_flags
);
1599 ath10k_err("Failed to get pcie config_flags: %d\n", ret
);
1603 pcie_config_flags
&= ~PCIE_CONFIG_FLAG_ENABLE_L1
;
1605 ret
= ath10k_pci_diag_write_mem(ar
, pcie_state_targ_addr
+
1606 offsetof(struct pcie_state
, config_flags
),
1608 sizeof(pcie_config_flags
));
1610 ath10k_err("Failed to write pcie config_flags: %d\n", ret
);
1614 /* configure early allocation */
1615 ealloc_targ_addr
= host_interest_item_address(HI_ITEM(hi_early_alloc
));
1617 ret
= ath10k_pci_diag_read_access(ar
, ealloc_targ_addr
, &ealloc_value
);
1619 ath10k_err("Faile to get early alloc val: %d\n", ret
);
1623 /* first bank is switched to IRAM */
1624 ealloc_value
|= ((HI_EARLY_ALLOC_MAGIC
<< HI_EARLY_ALLOC_MAGIC_SHIFT
) &
1625 HI_EARLY_ALLOC_MAGIC_MASK
);
1626 ealloc_value
|= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT
) &
1627 HI_EARLY_ALLOC_IRAM_BANKS_MASK
);
1629 ret
= ath10k_pci_diag_write_access(ar
, ealloc_targ_addr
, ealloc_value
);
1631 ath10k_err("Failed to set early alloc val: %d\n", ret
);
1635 /* Tell Target to proceed with initialization */
1636 flag2_targ_addr
= host_interest_item_address(HI_ITEM(hi_option_flag2
));
1638 ret
= ath10k_pci_diag_read_access(ar
, flag2_targ_addr
, &flag2_value
);
1640 ath10k_err("Failed to get option val: %d\n", ret
);
1644 flag2_value
|= HI_OPTION_EARLY_CFG_DONE
;
1646 ret
= ath10k_pci_diag_write_access(ar
, flag2_targ_addr
, flag2_value
);
1648 ath10k_err("Failed to set option val: %d\n", ret
);
1657 static int ath10k_pci_ce_init(struct ath10k
*ar
)
1659 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1660 struct hif_ce_pipe_info
*pipe_info
;
1661 const struct ce_attr
*attr
;
1664 for (pipe_num
= 0; pipe_num
< ar_pci
->ce_count
; pipe_num
++) {
1665 pipe_info
= &ar_pci
->pipe_info
[pipe_num
];
1666 pipe_info
->pipe_num
= pipe_num
;
1667 pipe_info
->hif_ce_state
= ar
;
1668 attr
= &host_ce_config_wlan
[pipe_num
];
1670 pipe_info
->ce_hdl
= ath10k_ce_init(ar
, pipe_num
, attr
);
1671 if (pipe_info
->ce_hdl
== NULL
) {
1672 ath10k_err("Unable to initialize CE for pipe: %d\n",
1675 /* It is safe to call it here. It checks if ce_hdl is
1676 * valid for each pipe */
1677 ath10k_pci_ce_deinit(ar
);
1681 if (pipe_num
== ar_pci
->ce_count
- 1) {
1683 * Reserve the ultimate CE for
1684 * diagnostic Window support
1687 ar_pci
->pipe_info
[ar_pci
->ce_count
- 1].ce_hdl
;
1691 pipe_info
->buf_sz
= (size_t) (attr
->src_sz_max
);
1695 * Initially, establish CE completion handlers for use with BMI.
1696 * These are overwritten with generic handlers after we exit BMI phase.
1698 pipe_info
= &ar_pci
->pipe_info
[BMI_CE_NUM_TO_TARG
];
1699 ath10k_ce_send_cb_register(pipe_info
->ce_hdl
,
1700 ath10k_pci_bmi_send_done
, 0);
1702 pipe_info
= &ar_pci
->pipe_info
[BMI_CE_NUM_TO_HOST
];
1703 ath10k_ce_recv_cb_register(pipe_info
->ce_hdl
,
1704 ath10k_pci_bmi_recv_data
);
1709 static void ath10k_pci_fw_interrupt_handler(struct ath10k
*ar
)
1711 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1712 u32 fw_indicator_address
, fw_indicator
;
1714 ath10k_pci_wake(ar
);
1716 fw_indicator_address
= ar_pci
->fw_indicator_address
;
1717 fw_indicator
= ath10k_pci_read32(ar
, fw_indicator_address
);
1719 if (fw_indicator
& FW_IND_EVENT_PENDING
) {
1720 /* ACK: clear Target-side pending event */
1721 ath10k_pci_write32(ar
, fw_indicator_address
,
1722 fw_indicator
& ~FW_IND_EVENT_PENDING
);
1724 if (ar_pci
->started
) {
1725 ath10k_pci_hif_dump_area(ar
);
1728 * Probable Target failure before we're prepared
1729 * to handle it. Generally unexpected.
1731 ath10k_warn("early firmware event indicated\n");
1735 ath10k_pci_sleep(ar
);
1738 static const struct ath10k_hif_ops ath10k_pci_hif_ops
= {
1739 .send_head
= ath10k_pci_hif_send_head
,
1740 .exchange_bmi_msg
= ath10k_pci_hif_exchange_bmi_msg
,
1741 .start
= ath10k_pci_hif_start
,
1742 .stop
= ath10k_pci_hif_stop
,
1743 .map_service_to_pipe
= ath10k_pci_hif_map_service_to_pipe
,
1744 .get_default_pipe
= ath10k_pci_hif_get_default_pipe
,
1745 .send_complete_check
= ath10k_pci_hif_send_complete_check
,
1746 .init
= ath10k_pci_hif_post_init
,
1747 .get_free_queue_number
= ath10k_pci_hif_get_free_queue_number
,
1750 static void ath10k_pci_ce_tasklet(unsigned long ptr
)
1752 struct hif_ce_pipe_info
*pipe
= (struct hif_ce_pipe_info
*)ptr
;
1753 struct ath10k_pci
*ar_pci
= pipe
->ar_pci
;
1755 ath10k_ce_per_engine_service(ar_pci
->ar
, pipe
->pipe_num
);
1758 static void ath10k_msi_err_tasklet(unsigned long data
)
1760 struct ath10k
*ar
= (struct ath10k
*)data
;
1762 ath10k_pci_fw_interrupt_handler(ar
);
1766 * Handler for a per-engine interrupt on a PARTICULAR CE.
1767 * This is used in cases where each CE has a private MSI interrupt.
1769 static irqreturn_t
ath10k_pci_per_engine_handler(int irq
, void *arg
)
1771 struct ath10k
*ar
= arg
;
1772 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1773 int ce_id
= irq
- ar_pci
->pdev
->irq
- MSI_ASSIGN_CE_INITIAL
;
1775 if (ce_id
< 0 || ce_id
>= ARRAY_SIZE(ar_pci
->pipe_info
)) {
1776 ath10k_warn("unexpected/invalid irq %d ce_id %d\n", irq
, ce_id
);
1781 * NOTE: We are able to derive ce_id from irq because we
1782 * use a one-to-one mapping for CE's 0..5.
1783 * CE's 6 & 7 do not use interrupts at all.
1785 * This mapping must be kept in sync with the mapping
1788 tasklet_schedule(&ar_pci
->pipe_info
[ce_id
].intr
);
1792 static irqreturn_t
ath10k_pci_msi_fw_handler(int irq
, void *arg
)
1794 struct ath10k
*ar
= arg
;
1795 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1797 tasklet_schedule(&ar_pci
->msi_fw_err
);
1802 * Top-level interrupt handler for all PCI interrupts from a Target.
1803 * When a block of MSI interrupts is allocated, this top-level handler
1804 * is not used; instead, we directly call the correct sub-handler.
1806 static irqreturn_t
ath10k_pci_interrupt_handler(int irq
, void *arg
)
1808 struct ath10k
*ar
= arg
;
1809 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1811 if (ar_pci
->num_msi_intrs
== 0) {
1813 * IMPORTANT: INTR_CLR regiser has to be set after
1814 * INTR_ENABLE is set to 0, otherwise interrupt can not be
1817 iowrite32(0, ar_pci
->mem
+
1818 (SOC_CORE_BASE_ADDRESS
|
1819 PCIE_INTR_ENABLE_ADDRESS
));
1820 iowrite32(PCIE_INTR_FIRMWARE_MASK
|
1821 PCIE_INTR_CE_MASK_ALL
,
1822 ar_pci
->mem
+ (SOC_CORE_BASE_ADDRESS
|
1823 PCIE_INTR_CLR_ADDRESS
));
1825 * IMPORTANT: this extra read transaction is required to
1826 * flush the posted write buffer.
1828 (void) ioread32(ar_pci
->mem
+
1829 (SOC_CORE_BASE_ADDRESS
|
1830 PCIE_INTR_ENABLE_ADDRESS
));
1833 tasklet_schedule(&ar_pci
->intr_tq
);
1838 static void ath10k_pci_tasklet(unsigned long data
)
1840 struct ath10k
*ar
= (struct ath10k
*)data
;
1841 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1843 ath10k_pci_fw_interrupt_handler(ar
); /* FIXME: Handle FW error */
1844 ath10k_ce_per_engine_service_any(ar
);
1846 if (ar_pci
->num_msi_intrs
== 0) {
1847 /* Enable Legacy PCI line interrupts */
1848 iowrite32(PCIE_INTR_FIRMWARE_MASK
|
1849 PCIE_INTR_CE_MASK_ALL
,
1850 ar_pci
->mem
+ (SOC_CORE_BASE_ADDRESS
|
1851 PCIE_INTR_ENABLE_ADDRESS
));
1853 * IMPORTANT: this extra read transaction is required to
1854 * flush the posted write buffer
1856 (void) ioread32(ar_pci
->mem
+
1857 (SOC_CORE_BASE_ADDRESS
|
1858 PCIE_INTR_ENABLE_ADDRESS
));
1862 static int ath10k_pci_start_intr_msix(struct ath10k
*ar
, int num
)
1864 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1868 ret
= pci_enable_msi_block(ar_pci
->pdev
, num
);
1872 ret
= request_irq(ar_pci
->pdev
->irq
+ MSI_ASSIGN_FW
,
1873 ath10k_pci_msi_fw_handler
,
1874 IRQF_SHARED
, "ath10k_pci", ar
);
1878 for (i
= MSI_ASSIGN_CE_INITIAL
; i
<= MSI_ASSIGN_CE_MAX
; i
++) {
1879 ret
= request_irq(ar_pci
->pdev
->irq
+ i
,
1880 ath10k_pci_per_engine_handler
,
1881 IRQF_SHARED
, "ath10k_pci", ar
);
1883 ath10k_warn("request_irq(%d) failed %d\n",
1884 ar_pci
->pdev
->irq
+ i
, ret
);
1886 for (i
--; i
>= MSI_ASSIGN_CE_INITIAL
; i
--)
1887 free_irq(ar_pci
->pdev
->irq
+ i
, ar
);
1889 free_irq(ar_pci
->pdev
->irq
+ MSI_ASSIGN_FW
, ar
);
1890 pci_disable_msi(ar_pci
->pdev
);
1895 ath10k_info("MSI-X interrupt handling (%d intrs)\n", num
);
1899 static int ath10k_pci_start_intr_msi(struct ath10k
*ar
)
1901 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1904 ret
= pci_enable_msi(ar_pci
->pdev
);
1908 ret
= request_irq(ar_pci
->pdev
->irq
,
1909 ath10k_pci_interrupt_handler
,
1910 IRQF_SHARED
, "ath10k_pci", ar
);
1912 pci_disable_msi(ar_pci
->pdev
);
1916 ath10k_info("MSI interrupt handling\n");
1920 static int ath10k_pci_start_intr_legacy(struct ath10k
*ar
)
1922 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1925 ret
= request_irq(ar_pci
->pdev
->irq
,
1926 ath10k_pci_interrupt_handler
,
1927 IRQF_SHARED
, "ath10k_pci", ar
);
1932 * Make sure to wake the Target before enabling Legacy
1935 iowrite32(PCIE_SOC_WAKE_V_MASK
,
1936 ar_pci
->mem
+ PCIE_LOCAL_BASE_ADDRESS
+
1937 PCIE_SOC_WAKE_ADDRESS
);
1939 ath10k_pci_wait(ar
);
1942 * A potential race occurs here: The CORE_BASE write
1943 * depends on target correctly decoding AXI address but
1944 * host won't know when target writes BAR to CORE_CTRL.
1945 * This write might get lost if target has NOT written BAR.
1946 * For now, fix the race by repeating the write in below
1947 * synchronization checking.
1949 iowrite32(PCIE_INTR_FIRMWARE_MASK
|
1950 PCIE_INTR_CE_MASK_ALL
,
1951 ar_pci
->mem
+ (SOC_CORE_BASE_ADDRESS
|
1952 PCIE_INTR_ENABLE_ADDRESS
));
1953 iowrite32(PCIE_SOC_WAKE_RESET
,
1954 ar_pci
->mem
+ PCIE_LOCAL_BASE_ADDRESS
+
1955 PCIE_SOC_WAKE_ADDRESS
);
1957 ath10k_info("legacy interrupt handling\n");
1961 static int ath10k_pci_start_intr(struct ath10k
*ar
)
1963 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
1964 int num
= MSI_NUM_REQUEST
;
1968 tasklet_init(&ar_pci
->intr_tq
, ath10k_pci_tasklet
, (unsigned long) ar
);
1969 tasklet_init(&ar_pci
->msi_fw_err
, ath10k_msi_err_tasklet
,
1970 (unsigned long) ar
);
1972 for (i
= 0; i
< CE_COUNT
; i
++) {
1973 ar_pci
->pipe_info
[i
].ar_pci
= ar_pci
;
1974 tasklet_init(&ar_pci
->pipe_info
[i
].intr
,
1975 ath10k_pci_ce_tasklet
,
1976 (unsigned long)&ar_pci
->pipe_info
[i
]);
1979 if (!test_bit(ATH10K_PCI_FEATURE_MSI_X
, ar_pci
->features
))
1983 ret
= ath10k_pci_start_intr_msix(ar
, num
);
1987 ath10k_warn("MSI-X didn't succeed (%d), trying MSI\n", ret
);
1992 ret
= ath10k_pci_start_intr_msi(ar
);
1996 ath10k_warn("MSI didn't succeed (%d), trying legacy INTR\n",
2001 ret
= ath10k_pci_start_intr_legacy(ar
);
2004 ar_pci
->num_msi_intrs
= num
;
2005 ar_pci
->ce_count
= CE_COUNT
;
2009 static void ath10k_pci_stop_intr(struct ath10k
*ar
)
2011 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
2014 /* There's at least one interrupt irregardless whether its legacy INTR
2015 * or MSI or MSI-X */
2016 for (i
= 0; i
< max(1, ar_pci
->num_msi_intrs
); i
++)
2017 free_irq(ar_pci
->pdev
->irq
+ i
, ar
);
2019 if (ar_pci
->num_msi_intrs
> 0)
2020 pci_disable_msi(ar_pci
->pdev
);
2023 static int ath10k_pci_reset_target(struct ath10k
*ar
)
2025 struct ath10k_pci
*ar_pci
= ath10k_pci_priv(ar
);
2026 int wait_limit
= 300; /* 3 sec */
2028 /* Wait for Target to finish initialization before we proceed. */
2029 iowrite32(PCIE_SOC_WAKE_V_MASK
,
2030 ar_pci
->mem
+ PCIE_LOCAL_BASE_ADDRESS
+
2031 PCIE_SOC_WAKE_ADDRESS
);
2033 ath10k_pci_wait(ar
);
2035 while (wait_limit
-- &&
2036 !(ioread32(ar_pci
->mem
+ FW_INDICATOR_ADDRESS
) &
2037 FW_IND_INITIALIZED
)) {
2038 if (ar_pci
->num_msi_intrs
== 0)
2039 /* Fix potential race by repeating CORE_BASE writes */
2040 iowrite32(PCIE_INTR_FIRMWARE_MASK
|
2041 PCIE_INTR_CE_MASK_ALL
,
2042 ar_pci
->mem
+ (SOC_CORE_BASE_ADDRESS
|
2043 PCIE_INTR_ENABLE_ADDRESS
));
2047 if (wait_limit
< 0) {
2048 ath10k_err("Target stalled\n");
2049 iowrite32(PCIE_SOC_WAKE_RESET
,
2050 ar_pci
->mem
+ PCIE_LOCAL_BASE_ADDRESS
+
2051 PCIE_SOC_WAKE_ADDRESS
);
2055 iowrite32(PCIE_SOC_WAKE_RESET
,
2056 ar_pci
->mem
+ PCIE_LOCAL_BASE_ADDRESS
+
2057 PCIE_SOC_WAKE_ADDRESS
);
2062 static void ath10k_pci_device_reset(struct ath10k_pci
*ar_pci
)
2064 struct ath10k
*ar
= ar_pci
->ar
;
2065 void __iomem
*mem
= ar_pci
->mem
;
2069 if (!SOC_GLOBAL_RESET_ADDRESS
)
2075 ath10k_pci_reg_write32(mem
, PCIE_SOC_WAKE_ADDRESS
,
2076 PCIE_SOC_WAKE_V_MASK
);
2077 for (i
= 0; i
< ATH_PCI_RESET_WAIT_MAX
; i
++) {
2078 if (ath10k_pci_target_is_awake(ar
))
2083 /* Put Target, including PCIe, into RESET. */
2084 val
= ath10k_pci_reg_read32(mem
, SOC_GLOBAL_RESET_ADDRESS
);
2086 ath10k_pci_reg_write32(mem
, SOC_GLOBAL_RESET_ADDRESS
, val
);
2088 for (i
= 0; i
< ATH_PCI_RESET_WAIT_MAX
; i
++) {
2089 if (ath10k_pci_reg_read32(mem
, RTC_STATE_ADDRESS
) &
2090 RTC_STATE_COLD_RESET_MASK
)
2095 /* Pull Target, including PCIe, out of RESET. */
2097 ath10k_pci_reg_write32(mem
, SOC_GLOBAL_RESET_ADDRESS
, val
);
2099 for (i
= 0; i
< ATH_PCI_RESET_WAIT_MAX
; i
++) {
2100 if (!(ath10k_pci_reg_read32(mem
, RTC_STATE_ADDRESS
) &
2101 RTC_STATE_COLD_RESET_MASK
))
2106 ath10k_pci_reg_write32(mem
, PCIE_SOC_WAKE_ADDRESS
, PCIE_SOC_WAKE_RESET
);
2109 static void ath10k_pci_dump_features(struct ath10k_pci
*ar_pci
)
2113 for (i
= 0; i
< ATH10K_PCI_FEATURE_COUNT
; i
++) {
2114 if (!test_bit(i
, ar_pci
->features
))
2118 case ATH10K_PCI_FEATURE_MSI_X
:
2119 ath10k_dbg(ATH10K_DBG_PCI
, "device supports MSI-X\n");
2121 case ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND
:
2122 ath10k_dbg(ATH10K_DBG_PCI
, "QCA988X_1.0 workaround enabled\n");
2128 static int ath10k_pci_probe(struct pci_dev
*pdev
,
2129 const struct pci_device_id
*pci_dev
)
2134 struct ath10k_pci
*ar_pci
;
2137 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
2139 ar_pci
= kzalloc(sizeof(*ar_pci
), GFP_KERNEL
);
2143 ar_pci
->pdev
= pdev
;
2144 ar_pci
->dev
= &pdev
->dev
;
2146 switch (pci_dev
->device
) {
2147 case QCA988X_1_0_DEVICE_ID
:
2148 set_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND
, ar_pci
->features
);
2150 case QCA988X_2_0_DEVICE_ID
:
2151 set_bit(ATH10K_PCI_FEATURE_MSI_X
, ar_pci
->features
);
2155 ath10k_err("Unkown device ID: %d\n", pci_dev
->device
);
2159 ath10k_pci_dump_features(ar_pci
);
2161 ar
= ath10k_core_create(ar_pci
, ar_pci
->dev
, ATH10K_BUS_PCI
,
2162 &ath10k_pci_hif_ops
);
2164 ath10k_err("ath10k_core_create failed!\n");
2169 /* Enable QCA988X_1.0 HW workarounds */
2170 if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND
, ar_pci
->features
))
2171 spin_lock_init(&ar_pci
->hw_v1_workaround_lock
);
2174 ar_pci
->fw_indicator_address
= FW_INDICATOR_ADDRESS
;
2175 atomic_set(&ar_pci
->keep_awake_count
, 0);
2177 pci_set_drvdata(pdev
, ar
);
2180 * Without any knowledge of the Host, the Target may have been reset or
2181 * power cycled and its Config Space may no longer reflect the PCI
2182 * address space that was assigned earlier by the PCI infrastructure.
2185 ret
= pci_assign_resource(pdev
, BAR_NUM
);
2187 ath10k_err("cannot assign PCI space: %d\n", ret
);
2191 ret
= pci_enable_device(pdev
);
2193 ath10k_err("cannot enable PCI device: %d\n", ret
);
2197 /* Request MMIO resources */
2198 ret
= pci_request_region(pdev
, BAR_NUM
, "ath");
2200 ath10k_err("PCI MMIO reservation error: %d\n", ret
);
2205 * Target structures have a limit of 32 bit DMA pointers.
2206 * DMA pointers can be wider than 32 bits by default on some systems.
2208 ret
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
2210 ath10k_err("32-bit DMA not available: %d\n", ret
);
2214 ret
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
2216 ath10k_err("cannot enable 32-bit consistent DMA\n");
2220 /* Set bus master bit in PCI_COMMAND to enable DMA */
2221 pci_set_master(pdev
);
2224 * Temporary FIX: disable ASPM
2225 * Will be removed after the OTP is programmed
2227 pci_read_config_dword(pdev
, 0x80, &lcr_val
);
2228 pci_write_config_dword(pdev
, 0x80, (lcr_val
& 0xffffff00));
2230 /* Arrange for access to Target SoC registers. */
2231 mem
= pci_iomap(pdev
, BAR_NUM
, 0);
2233 ath10k_err("PCI iomap error\n");
2240 spin_lock_init(&ar_pci
->ce_lock
);
2242 ar_pci
->cacheline_sz
= dma_get_cache_alignment();
2244 ret
= ath10k_pci_start_intr(ar
);
2246 ath10k_err("could not start interrupt handling (%d)\n", ret
);
2251 * Bring the target up cleanly.
2253 * The target may be in an undefined state with an AUX-powered Target
2254 * and a Host in WoW mode. If the Host crashes, loses power, or is
2255 * restarted (without unloading the driver) then the Target is left
2256 * (aux) powered and running. On a subsequent driver load, the Target
2257 * is in an unexpected state. We try to catch that here in order to
2258 * reset the Target and retry the probe.
2260 ath10k_pci_device_reset(ar_pci
);
2262 ret
= ath10k_pci_reset_target(ar
);
2266 if (ath10k_target_ps
) {
2267 ath10k_dbg(ATH10K_DBG_PCI
, "on-chip power save enabled\n");
2269 /* Force AWAKE forever */
2270 ath10k_dbg(ATH10K_DBG_PCI
, "on-chip power save disabled\n");
2271 ath10k_do_pci_wake(ar
);
2274 ret
= ath10k_pci_ce_init(ar
);
2278 ret
= ath10k_pci_init_config(ar
);
2282 ret
= ath10k_pci_wake_target_cpu(ar
);
2284 ath10k_err("could not wake up target CPU (%d)\n", ret
);
2288 ret
= ath10k_core_register(ar
);
2290 ath10k_err("could not register driver core (%d)\n", ret
);
2297 ath10k_pci_ce_deinit(ar
);
2299 ath10k_pci_stop_intr(ar
);
2301 pci_iounmap(pdev
, mem
);
2303 pci_clear_master(pdev
);
2305 pci_release_region(pdev
, BAR_NUM
);
2307 pci_disable_device(pdev
);
2309 pci_set_drvdata(pdev
, NULL
);
2310 ath10k_core_destroy(ar
);
2312 /* call HIF PCI free here */
2318 static void ath10k_pci_remove(struct pci_dev
*pdev
)
2320 struct ath10k
*ar
= pci_get_drvdata(pdev
);
2321 struct ath10k_pci
*ar_pci
;
2323 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
2328 ar_pci
= ath10k_pci_priv(ar
);
2333 tasklet_kill(&ar_pci
->msi_fw_err
);
2335 ath10k_core_unregister(ar
);
2336 ath10k_pci_stop_intr(ar
);
2338 pci_set_drvdata(pdev
, NULL
);
2339 pci_iounmap(pdev
, ar_pci
->mem
);
2340 pci_release_region(pdev
, BAR_NUM
);
2341 pci_clear_master(pdev
);
2342 pci_disable_device(pdev
);
2344 ath10k_core_destroy(ar
);
2348 #if defined(CONFIG_PM_SLEEP)
2350 #define ATH10K_PCI_PM_CONTROL 0x44
2352 static int ath10k_pci_suspend(struct device
*device
)
2354 struct pci_dev
*pdev
= to_pci_dev(device
);
2355 struct ath10k
*ar
= pci_get_drvdata(pdev
);
2356 struct ath10k_pci
*ar_pci
;
2360 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
2365 ar_pci
= ath10k_pci_priv(ar
);
2369 if (ath10k_core_target_suspend(ar
))
2372 ret
= wait_event_interruptible_timeout(ar
->event_queue
,
2373 ar
->is_target_paused
== true,
2376 ath10k_warn("suspend interrupted (%d)\n", ret
);
2379 } else if (ret
== 0) {
2380 ath10k_warn("suspend timed out - target pause event never came\n");
2386 * reset is_target_paused and host can check that in next time,
2387 * or it will always be TRUE and host just skip the waiting
2388 * condition, it causes target assert due to host already
2391 ar
->is_target_paused
= false;
2393 pci_read_config_dword(pdev
, ATH10K_PCI_PM_CONTROL
, &val
);
2395 if ((val
& 0x000000ff) != 0x3) {
2396 pci_save_state(pdev
);
2397 pci_disable_device(pdev
);
2398 pci_write_config_dword(pdev
, ATH10K_PCI_PM_CONTROL
,
2399 (val
& 0xffffff00) | 0x03);
2404 ret
= ath10k_core_target_resume(ar
);
2406 ath10k_warn("could not resume (%d)\n", ret
);
2411 static int ath10k_pci_resume(struct device
*device
)
2413 struct pci_dev
*pdev
= to_pci_dev(device
);
2414 struct ath10k
*ar
= pci_get_drvdata(pdev
);
2415 struct ath10k_pci
*ar_pci
;
2419 ath10k_dbg(ATH10K_DBG_PCI
, "%s\n", __func__
);
2423 ar_pci
= ath10k_pci_priv(ar
);
2428 ret
= pci_enable_device(pdev
);
2430 ath10k_warn("cannot enable PCI device: %d\n", ret
);
2434 pci_read_config_dword(pdev
, ATH10K_PCI_PM_CONTROL
, &val
);
2436 if ((val
& 0x000000ff) != 0) {
2437 pci_restore_state(pdev
);
2438 pci_write_config_dword(pdev
, ATH10K_PCI_PM_CONTROL
,
2441 * Suspend/Resume resets the PCI configuration space,
2442 * so we have to re-disable the RETRY_TIMEOUT register (0x41)
2443 * to keep PCI Tx retries from interfering with C3 CPU state
2445 pci_read_config_dword(pdev
, 0x40, &val
);
2447 if ((val
& 0x0000ff00) != 0)
2448 pci_write_config_dword(pdev
, 0x40, val
& 0xffff00ff);
2451 ret
= ath10k_core_target_resume(ar
);
2453 ath10k_warn("target resume failed: %d\n", ret
);
2458 static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops
,
2462 #define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops)
2466 #define ATH10K_PCI_PM_OPS NULL
2468 #endif /* CONFIG_PM_SLEEP */
2470 MODULE_DEVICE_TABLE(pci
, ath10k_pci_id_table
);
2472 static struct pci_driver ath10k_pci_driver
= {
2473 .name
= "ath10k_pci",
2474 .id_table
= ath10k_pci_id_table
,
2475 .probe
= ath10k_pci_probe
,
2476 .remove
= ath10k_pci_remove
,
2477 .driver
.pm
= ATH10K_PCI_PM_OPS
,
2480 static int __init
ath10k_pci_init(void)
2484 ret
= pci_register_driver(&ath10k_pci_driver
);
2486 ath10k_err("pci_register_driver failed [%d]\n", ret
);
2490 module_init(ath10k_pci_init
);
2492 static void __exit
ath10k_pci_exit(void)
2494 pci_unregister_driver(&ath10k_pci_driver
);
2497 module_exit(ath10k_pci_exit
);
2499 MODULE_AUTHOR("Qualcomm Atheros");
2500 MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
2501 MODULE_LICENSE("Dual BSD/GPL");
2502 MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR
"/" QCA988X_HW_1_0_FW_FILE
);
2503 MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR
"/" QCA988X_HW_1_0_OTP_FILE
);
2504 MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR
"/" QCA988X_HW_1_0_BOARD_DATA_FILE
);
2505 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR
"/" QCA988X_HW_2_0_FW_FILE
);
2506 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR
"/" QCA988X_HW_2_0_OTP_FILE
);
2507 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR
"/" QCA988X_HW_2_0_BOARD_DATA_FILE
);