1 /* Copyright (c) 2016 The Linux Foundation. All rights reserved.
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
14 #include <linux/pm_opp.h>
18 * The GPMU data block is a block of shared registers that can be used to
19 * communicate back and forth. These "registers" are by convention with the GPMU
20 * firwmare and not bound to any specific hardware design
23 #define AGC_INIT_BASE REG_A5XX_GPMU_DATA_RAM_BASE
24 #define AGC_INIT_MSG_MAGIC (AGC_INIT_BASE + 5)
25 #define AGC_MSG_BASE (AGC_INIT_BASE + 7)
27 #define AGC_MSG_STATE (AGC_MSG_BASE + 0)
28 #define AGC_MSG_COMMAND (AGC_MSG_BASE + 1)
29 #define AGC_MSG_PAYLOAD_SIZE (AGC_MSG_BASE + 3)
30 #define AGC_MSG_PAYLOAD(_o) ((AGC_MSG_BASE + 5) + (_o))
32 #define AGC_POWER_CONFIG_PRODUCTION_ID 1
33 #define AGC_INIT_MSG_VALUE 0xBABEFACE
38 } a5xx_sequence_regs
[] = {
39 { 0xB9A1, 0x00010303 },
40 { 0xB9A2, 0x13000000 },
41 { 0xB9A3, 0x00460020 },
42 { 0xB9A4, 0x10000000 },
43 { 0xB9A5, 0x040A1707 },
44 { 0xB9A6, 0x00010000 },
45 { 0xB9A7, 0x0E000904 },
46 { 0xB9A8, 0x10000000 },
47 { 0xB9A9, 0x01165000 },
48 { 0xB9AA, 0x000E0002 },
49 { 0xB9AB, 0x03884141 },
50 { 0xB9AC, 0x10000840 },
51 { 0xB9AD, 0x572A5000 },
52 { 0xB9AE, 0x00000003 },
53 { 0xB9AF, 0x00000000 },
54 { 0xB9B0, 0x10000000 },
55 { 0xB828, 0x6C204010 },
56 { 0xB829, 0x6C204011 },
57 { 0xB82A, 0x6C204012 },
58 { 0xB82B, 0x6C204013 },
59 { 0xB82C, 0x6C204014 },
60 { 0xB90F, 0x00000004 },
61 { 0xB910, 0x00000002 },
62 { 0xB911, 0x00000002 },
63 { 0xB912, 0x00000002 },
64 { 0xB913, 0x00000002 },
65 { 0xB92F, 0x00000004 },
66 { 0xB930, 0x00000005 },
67 { 0xB931, 0x00000005 },
68 { 0xB932, 0x00000005 },
69 { 0xB933, 0x00000005 },
70 { 0xB96F, 0x00000001 },
71 { 0xB970, 0x00000003 },
72 { 0xB94F, 0x00000004 },
73 { 0xB950, 0x0000000B },
74 { 0xB951, 0x0000000B },
75 { 0xB952, 0x0000000B },
76 { 0xB953, 0x0000000B },
77 { 0xB907, 0x00000019 },
78 { 0xB927, 0x00000019 },
79 { 0xB947, 0x00000019 },
80 { 0xB967, 0x00000019 },
81 { 0xB987, 0x00000019 },
82 { 0xB906, 0x00220001 },
83 { 0xB926, 0x00220001 },
84 { 0xB946, 0x00220001 },
85 { 0xB966, 0x00220001 },
86 { 0xB986, 0x00300000 },
87 { 0xAC40, 0x0340FF41 },
88 { 0xAC41, 0x03BEFED0 },
89 { 0xAC42, 0x00331FED },
90 { 0xAC43, 0x021FFDD3 },
91 { 0xAC44, 0x5555AAAA },
92 { 0xAC45, 0x5555AAAA },
93 { 0xB9BA, 0x00000008 },
97 * Get the actual voltage value for the operating point at the specified
100 static inline uint32_t _get_mvolts(struct msm_gpu
*gpu
, uint32_t freq
)
102 struct drm_device
*dev
= gpu
->dev
;
103 struct msm_drm_private
*priv
= dev
->dev_private
;
104 struct platform_device
*pdev
= priv
->gpu_pdev
;
105 struct dev_pm_opp
*opp
;
108 opp
= dev_pm_opp_find_freq_exact(&pdev
->dev
, freq
, true);
111 ret
= dev_pm_opp_get_voltage(opp
) / 1000;
118 /* Setup thermal limit management */
119 static void a5xx_lm_setup(struct msm_gpu
*gpu
)
121 struct adreno_gpu
*adreno_gpu
= to_adreno_gpu(gpu
);
122 struct a5xx_gpu
*a5xx_gpu
= to_a5xx_gpu(adreno_gpu
);
125 /* Write the block of sequence registers */
126 for (i
= 0; i
< ARRAY_SIZE(a5xx_sequence_regs
); i
++)
127 gpu_write(gpu
, a5xx_sequence_regs
[i
].reg
,
128 a5xx_sequence_regs
[i
].value
);
130 /* Hard code the A530 GPU thermal sensor ID for the GPMU */
131 gpu_write(gpu
, REG_A5XX_GPMU_TEMP_SENSOR_ID
, 0x60007);
132 gpu_write(gpu
, REG_A5XX_GPMU_DELTA_TEMP_THRESHOLD
, 0x01);
133 gpu_write(gpu
, REG_A5XX_GPMU_TEMP_SENSOR_CONFIG
, 0x01);
135 /* Until we get clock scaling 0 is always the active power level */
136 gpu_write(gpu
, REG_A5XX_GPMU_GPMU_VOLTAGE
, 0x80000000 | 0);
138 gpu_write(gpu
, REG_A5XX_GPMU_BASE_LEAKAGE
, a5xx_gpu
->lm_leakage
);
140 /* The threshold is fixed at 6000 for A530 */
141 gpu_write(gpu
, REG_A5XX_GPMU_GPMU_PWR_THRESHOLD
, 0x80000000 | 6000);
143 gpu_write(gpu
, REG_A5XX_GPMU_BEC_ENABLE
, 0x10001FFF);
144 gpu_write(gpu
, REG_A5XX_GDPM_CONFIG1
, 0x00201FF1);
146 /* Write the voltage table */
147 gpu_write(gpu
, REG_A5XX_GPMU_BEC_ENABLE
, 0x10001FFF);
148 gpu_write(gpu
, REG_A5XX_GDPM_CONFIG1
, 0x201FF1);
150 gpu_write(gpu
, AGC_MSG_STATE
, 1);
151 gpu_write(gpu
, AGC_MSG_COMMAND
, AGC_POWER_CONFIG_PRODUCTION_ID
);
153 /* Write the max power - hard coded to 5448 for A530 */
154 gpu_write(gpu
, AGC_MSG_PAYLOAD(0), 5448);
155 gpu_write(gpu
, AGC_MSG_PAYLOAD(1), 1);
158 * For now just write the one voltage level - we will do more when we
161 gpu_write(gpu
, AGC_MSG_PAYLOAD(2), _get_mvolts(gpu
, gpu
->fast_rate
));
162 gpu_write(gpu
, AGC_MSG_PAYLOAD(3), gpu
->fast_rate
/ 1000000);
164 gpu_write(gpu
, AGC_MSG_PAYLOAD_SIZE
, 4 * sizeof(uint32_t));
165 gpu_write(gpu
, AGC_INIT_MSG_MAGIC
, AGC_INIT_MSG_VALUE
);
168 /* Enable SP/TP cpower collapse */
169 static void a5xx_pc_init(struct msm_gpu
*gpu
)
171 gpu_write(gpu
, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_CTRL
, 0x7F);
172 gpu_write(gpu
, REG_A5XX_GPMU_PWR_COL_BINNING_CTRL
, 0);
173 gpu_write(gpu
, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_HYST
, 0xA0080);
174 gpu_write(gpu
, REG_A5XX_GPMU_PWR_COL_STAGGER_DELAY
, 0x600040);
177 /* Enable the GPMU microcontroller */
178 static int a5xx_gpmu_init(struct msm_gpu
*gpu
)
180 struct adreno_gpu
*adreno_gpu
= to_adreno_gpu(gpu
);
181 struct a5xx_gpu
*a5xx_gpu
= to_a5xx_gpu(adreno_gpu
);
182 struct msm_ringbuffer
*ring
= gpu
->rb
[0];
184 if (!a5xx_gpu
->gpmu_dwords
)
187 /* Turn off protected mode for this operation */
188 OUT_PKT7(ring
, CP_SET_PROTECTED_MODE
, 1);
191 /* Kick off the IB to load the GPMU microcode */
192 OUT_PKT7(ring
, CP_INDIRECT_BUFFER_PFE
, 3);
193 OUT_RING(ring
, lower_32_bits(a5xx_gpu
->gpmu_iova
));
194 OUT_RING(ring
, upper_32_bits(a5xx_gpu
->gpmu_iova
));
195 OUT_RING(ring
, a5xx_gpu
->gpmu_dwords
);
197 /* Turn back on protected mode */
198 OUT_PKT7(ring
, CP_SET_PROTECTED_MODE
, 1);
201 gpu
->funcs
->flush(gpu
, ring
);
203 if (!a5xx_idle(gpu
, ring
)) {
204 DRM_ERROR("%s: Unable to load GPMU firmware. GPMU will not be active\n",
209 gpu_write(gpu
, REG_A5XX_GPMU_WFI_CONFIG
, 0x4014);
211 /* Kick off the GPMU */
212 gpu_write(gpu
, REG_A5XX_GPMU_CM3_SYSRESET
, 0x0);
215 * Wait for the GPMU to respond. It isn't fatal if it doesn't, we just
216 * won't have advanced power collapse.
218 if (spin_usecs(gpu
, 25, REG_A5XX_GPMU_GENERAL_0
, 0xFFFFFFFF,
220 DRM_ERROR("%s: GPMU firmware initialization timed out\n",
226 /* Enable limits management */
227 static void a5xx_lm_enable(struct msm_gpu
*gpu
)
229 gpu_write(gpu
, REG_A5XX_GDPM_INT_MASK
, 0x0);
230 gpu_write(gpu
, REG_A5XX_GDPM_INT_EN
, 0x0A);
231 gpu_write(gpu
, REG_A5XX_GPMU_GPMU_VOLTAGE_INTR_EN_MASK
, 0x01);
232 gpu_write(gpu
, REG_A5XX_GPMU_TEMP_THRESHOLD_INTR_EN_MASK
, 0x50000);
233 gpu_write(gpu
, REG_A5XX_GPMU_THROTTLE_UNMASK_FORCE_CTRL
, 0x30000);
235 gpu_write(gpu
, REG_A5XX_GPMU_CLOCK_THROTTLE_CTRL
, 0x011);
238 int a5xx_power_init(struct msm_gpu
*gpu
)
242 /* Set up the limits management */
245 /* Set up SP/TP power collpase */
249 ret
= a5xx_gpmu_init(gpu
);
253 /* Start the limits management */
259 void a5xx_gpmu_ucode_init(struct msm_gpu
*gpu
)
261 struct adreno_gpu
*adreno_gpu
= to_adreno_gpu(gpu
);
262 struct a5xx_gpu
*a5xx_gpu
= to_a5xx_gpu(adreno_gpu
);
263 struct drm_device
*drm
= gpu
->dev
;
264 const struct firmware
*fw
;
265 uint32_t dwords
= 0, offset
= 0, bosize
;
266 unsigned int *data
, *ptr
, *cmds
;
267 unsigned int cmds_size
;
269 if (a5xx_gpu
->gpmu_bo
)
272 /* Get the firmware */
273 fw
= adreno_request_fw(adreno_gpu
, adreno_gpu
->info
->gpmufw
);
275 DRM_ERROR("%s: Could not get GPMU firmware. GPMU will not be active\n",
280 data
= (unsigned int *) fw
->data
;
283 * The first dword is the size of the remaining data in dwords. Use it
284 * as a checksum of sorts and make sure it matches the actual size of
285 * the firmware that we read
288 if (fw
->size
< 8 || (data
[0] < 2) || (data
[0] >= (fw
->size
>> 2)))
291 /* The second dword is an ID - look for 2 (GPMU_FIRMWARE_ID) */
295 cmds
= data
+ data
[2] + 3;
296 cmds_size
= data
[0] - data
[2] - 2;
299 * A single type4 opcode can only have so many values attached so
300 * add enough opcodes to load the all the commands
302 bosize
= (cmds_size
+ (cmds_size
/ TYPE4_MAX_PAYLOAD
) + 1) << 2;
304 ptr
= msm_gem_kernel_new_locked(drm
, bosize
,
305 MSM_BO_UNCACHED
| MSM_BO_GPU_READONLY
, gpu
->aspace
,
306 &a5xx_gpu
->gpmu_bo
, &a5xx_gpu
->gpmu_iova
);
310 while (cmds_size
> 0) {
312 uint32_t _size
= cmds_size
> TYPE4_MAX_PAYLOAD
?
313 TYPE4_MAX_PAYLOAD
: cmds_size
;
315 ptr
[dwords
++] = PKT4(REG_A5XX_GPMU_INST_RAM_BASE
+ offset
,
318 for (i
= 0; i
< _size
; i
++)
319 ptr
[dwords
++] = *cmds
++;
325 msm_gem_put_vaddr(a5xx_gpu
->gpmu_bo
);
326 a5xx_gpu
->gpmu_dwords
= dwords
;
331 if (a5xx_gpu
->gpmu_iova
)
332 msm_gem_put_iova(a5xx_gpu
->gpmu_bo
, gpu
->aspace
);
333 if (a5xx_gpu
->gpmu_bo
)
334 drm_gem_object_unreference(a5xx_gpu
->gpmu_bo
);
336 a5xx_gpu
->gpmu_bo
= NULL
;
337 a5xx_gpu
->gpmu_iova
= 0;
338 a5xx_gpu
->gpmu_dwords
= 0;
341 /* No need to keep that firmware laying around anymore */
342 release_firmware(fw
);