1 /* SPDX-License-Identifier: GPL-2.0 */
5 * linux/include/linux/ide.h
7 * Copyright (C) 1994-2002 Linus Torvalds & authors
10 #include <linux/init.h>
11 #include <linux/ioport.h>
12 #include <linux/ata.h>
13 #include <linux/blkdev.h>
14 #include <linux/proc_fs.h>
15 #include <linux/interrupt.h>
16 #include <linux/bitops.h>
17 #include <linux/bio.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
21 #include <linux/mutex.h>
22 /* for request_sense */
23 #include <linux/cdrom.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <asm/byteorder.h>
28 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
29 # define SUPPORT_VLB_SYNC 0
31 # define SUPPORT_VLB_SYNC 1
35 * Probably not wise to fiddle with these
37 #define IDE_DEFAULT_MAX_FAILURES 1
38 #define ERROR_MAX 8 /* Max read/write errors per sector */
39 #define ERROR_RESET 3 /* Reset controller every 4th retry */
40 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
44 /* values for ide_request.type */
49 ATA_PRIV_SENSE
, /* sense request */
50 ATA_PRIV_PM_SUSPEND
, /* suspend request */
51 ATA_PRIV_PM_RESUME
, /* resume request */
55 struct scsi_request sreq
;
56 u8 sense
[SCSI_SENSE_BUFFERSIZE
];
60 static inline struct ide_request
*ide_req(struct request
*rq
)
62 return blk_mq_rq_to_pdu(rq
);
65 static inline bool ata_misc_request(struct request
*rq
)
67 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_MISC
;
70 static inline bool ata_taskfile_request(struct request
*rq
)
72 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_TASKFILE
;
75 static inline bool ata_pc_request(struct request
*rq
)
77 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_PC
;
80 static inline bool ata_sense_request(struct request
*rq
)
82 return blk_rq_is_private(rq
) && ide_req(rq
)->type
== ATA_PRIV_SENSE
;
85 static inline bool ata_pm_request(struct request
*rq
)
87 return blk_rq_is_private(rq
) &&
88 (ide_req(rq
)->type
== ATA_PRIV_PM_SUSPEND
||
89 ide_req(rq
)->type
== ATA_PRIV_PM_RESUME
);
92 /* Error codes returned in result to the higher part of the driver. */
94 IDE_DRV_ERROR_GENERAL
= 101,
95 IDE_DRV_ERROR_FILEMARK
= 102,
96 IDE_DRV_ERROR_EOD
= 103,
100 * Definitions for accessing IDE controller registers
102 #define IDE_NR_PORTS (10)
104 struct ide_io_ports
{
105 unsigned long data_addr
;
108 unsigned long error_addr
; /* read: error */
109 unsigned long feature_addr
; /* write: feature */
112 unsigned long nsect_addr
;
113 unsigned long lbal_addr
;
114 unsigned long lbam_addr
;
115 unsigned long lbah_addr
;
117 unsigned long device_addr
;
120 unsigned long status_addr
; /* read: status */
121 unsigned long command_addr
; /* write: command */
124 unsigned long ctl_addr
;
126 unsigned long irq_addr
;
129 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
131 #define BAD_R_STAT (ATA_BUSY | ATA_ERR)
132 #define BAD_W_STAT (BAD_R_STAT | ATA_DF)
133 #define BAD_STAT (BAD_R_STAT | ATA_DRQ)
134 #define DRIVE_READY (ATA_DRDY | ATA_DSC)
136 #define BAD_CRC (ATA_ABORTED | ATA_ICRC)
138 #define SATA_NR_PORTS (3) /* 16 possible ?? */
140 #define SATA_STATUS_OFFSET (0)
141 #define SATA_ERROR_OFFSET (1)
142 #define SATA_CONTROL_OFFSET (2)
145 * Our Physical Region Descriptor (PRD) table should be large enough
146 * to handle the biggest I/O request we are likely to see. Since requests
147 * can have no more than 256 sectors, and since the typical blocksize is
148 * two or more sectors, we could get by with a limit of 128 entries here for
149 * the usual worst case. Most requests seem to include some contiguous blocks,
150 * further reducing the number of table entries required.
152 * The driver reverts to PIO mode for individual requests that exceed
153 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
154 * 100% of all crazy scenarios here is not necessary.
156 * As it turns out though, we must allocate a full 4KB page for this,
157 * so the two PRD tables (ide0 & ide1) will each get half of that,
158 * allowing each to have about 256 entries (8 bytes each) from this.
161 #define PRD_ENTRIES 256
164 * Some more useful definitions
166 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
167 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
168 #define SECTOR_SIZE 512
171 * Timeouts for various operations:
174 /* spec allows up to 20ms, but CF cards and SSD drives need more */
175 WAIT_DRQ
= 1 * HZ
, /* 1s */
176 /* some laptops are very slow */
177 WAIT_READY
= 5 * HZ
, /* 5s */
178 /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
179 WAIT_PIDENTIFY
= 10 * HZ
, /* 10s */
180 /* worst case when spinning up */
181 WAIT_WORSTCASE
= 30 * HZ
, /* 30s */
182 /* maximum wait for an IRQ to happen */
183 WAIT_CMD
= 10 * HZ
, /* 10s */
184 /* Some drives require a longer IRQ timeout. */
185 WAIT_FLOPPY_CMD
= 50 * HZ
, /* 50s */
187 * Some drives (for example, Seagate STT3401A Travan) require a very
188 * long timeout, because they don't return an interrupt or clear their
189 * BSY bit until after the command completes (even retension commands).
191 WAIT_TAPE_CMD
= 900 * HZ
, /* 900s */
192 /* minimum sleep time */
193 WAIT_MIN_SLEEP
= HZ
/ 50, /* 20ms */
197 * Op codes for special requests to be handled by ide_special_rq().
198 * Values should be in the range of 0x20 to 0x3f.
200 #define REQ_DRIVE_RESET 0x20
201 #define REQ_DEVSET_EXEC 0x21
202 #define REQ_PARK_HEADS 0x22
203 #define REQ_UNPARK_HEADS 0x23
206 * hwif_chipset_t is used to keep track of the specific hardware
207 * chipset used by each IDE interface, if known.
209 enum { ide_unknown
, ide_generic
, ide_pci
,
210 ide_cmd640
, ide_dtc2278
, ide_ali14xx
,
211 ide_qd65xx
, ide_umc8672
, ide_ht6560b
,
212 ide_4drives
, ide_pmac
, ide_acorn
,
213 ide_au1xxx
, ide_palm3710
216 typedef u8 hwif_chipset_t
;
219 * Structure to hold all information about the location of this port
223 struct ide_io_ports io_ports
;
224 unsigned long io_ports_array
[IDE_NR_PORTS
];
227 int irq
; /* our irq number */
228 struct device
*dev
, *parent
;
229 unsigned long config
;
232 static inline void ide_std_init_ports(struct ide_hw
*hw
,
233 unsigned long io_addr
,
234 unsigned long ctl_addr
)
238 for (i
= 0; i
<= 7; i
++)
239 hw
->io_ports_array
[i
] = io_addr
++;
241 hw
->io_ports
.ctl_addr
= ctl_addr
;
247 * Now for the data we need to maintain per-drive: ide_drive_t
250 #define ide_scsi 0x21
251 #define ide_disk 0x20
252 #define ide_optical 0x7
253 #define ide_cdrom 0x5
255 #define ide_floppy 0x0
258 * Special Driver Flags
261 IDE_SFLAG_SET_GEOMETRY
= (1 << 0),
262 IDE_SFLAG_RECALIBRATE
= (1 << 1),
263 IDE_SFLAG_SET_MULTMODE
= (1 << 2),
267 * Status returned from various ide_ functions
270 ide_stopped
, /* no drive operation was started */
271 ide_started
, /* a drive operation was started, handler was set */
275 IDE_VALID_ERROR
= (1 << 1),
276 IDE_VALID_FEATURE
= IDE_VALID_ERROR
,
277 IDE_VALID_NSECT
= (1 << 2),
278 IDE_VALID_LBAL
= (1 << 3),
279 IDE_VALID_LBAM
= (1 << 4),
280 IDE_VALID_LBAH
= (1 << 5),
281 IDE_VALID_DEVICE
= (1 << 6),
282 IDE_VALID_LBA
= IDE_VALID_LBAL
|
285 IDE_VALID_OUT_TF
= IDE_VALID_FEATURE
|
288 IDE_VALID_IN_TF
= IDE_VALID_NSECT
|
290 IDE_VALID_OUT_HOB
= IDE_VALID_OUT_TF
,
291 IDE_VALID_IN_HOB
= IDE_VALID_ERROR
|
297 IDE_TFLAG_LBA48
= (1 << 0),
298 IDE_TFLAG_WRITE
= (1 << 1),
299 IDE_TFLAG_CUSTOM_HANDLER
= (1 << 2),
300 IDE_TFLAG_DMA_PIO_FALLBACK
= (1 << 3),
301 /* force 16-bit I/O operations */
302 IDE_TFLAG_IO_16BIT
= (1 << 4),
303 /* struct ide_cmd was allocated using kmalloc() */
304 IDE_TFLAG_DYN
= (1 << 5),
305 IDE_TFLAG_FS
= (1 << 6),
306 IDE_TFLAG_MULTI_PIO
= (1 << 7),
307 IDE_TFLAG_SET_XFER
= (1 << 8),
311 IDE_FTFLAG_FLAGGED
= (1 << 0),
312 IDE_FTFLAG_SET_IN_FLAGS
= (1 << 1),
313 IDE_FTFLAG_OUT_DATA
= (1 << 2),
314 IDE_FTFLAG_IN_DATA
= (1 << 3),
317 struct ide_taskfile
{
318 u8 data
; /* 0: data byte (for TASKFILE ioctl) */
320 u8 error
; /* read: error */
321 u8 feature
; /* write: feature */
323 u8 nsect
; /* 2: number of sectors */
324 u8 lbal
; /* 3: LBA low */
325 u8 lbam
; /* 4: LBA mid */
326 u8 lbah
; /* 5: LBA high */
327 u8 device
; /* 6: device select */
329 u8 status
; /* read: status */
330 u8 command
; /* write: command */
335 struct ide_taskfile tf
;
336 struct ide_taskfile hob
;
345 u8 ftf_flags
; /* for TASKFILE ioctl */
348 int sg_nents
; /* number of sg entries */
350 int sg_dma_direction
; /* DMA transfer direction */
354 unsigned int last_xfer_len
;
356 struct scatterlist
*cursg
;
357 unsigned int cursg_ofs
;
359 struct request
*rq
; /* copy of request */
362 /* ATAPI packet command flags */
364 /* set when an error is considered normal - no retry (ide-tape) */
365 PC_FLAG_ABORT
= (1 << 0),
366 PC_FLAG_SUPPRESS_ERROR
= (1 << 1),
367 PC_FLAG_WAIT_FOR_DSC
= (1 << 2),
368 PC_FLAG_DMA_OK
= (1 << 3),
369 PC_FLAG_DMA_IN_PROGRESS
= (1 << 4),
370 PC_FLAG_DMA_ERROR
= (1 << 5),
371 PC_FLAG_WRITING
= (1 << 6),
374 #define ATAPI_WAIT_PC (60 * HZ)
376 struct ide_atapi_pc
{
377 /* actual packet bytes */
379 /* incremented on each retry */
383 /* bytes to transfer */
386 /* the corresponding request */
392 * those are more or less driver-specific and some of them are subject
393 * to change/removal later.
395 unsigned long timeout
;
401 #ifdef CONFIG_BLK_DEV_IDEACPI
402 struct ide_acpi_drive_link
;
403 struct ide_acpi_hwif_link
;
408 struct ide_disk_ops
{
409 int (*check
)(struct ide_drive_s
*, const char *);
410 int (*get_capacity
)(struct ide_drive_s
*);
411 void (*unlock_native_capacity
)(struct ide_drive_s
*);
412 void (*setup
)(struct ide_drive_s
*);
413 void (*flush
)(struct ide_drive_s
*);
414 int (*init_media
)(struct ide_drive_s
*, struct gendisk
*);
415 int (*set_doorlock
)(struct ide_drive_s
*, struct gendisk
*,
417 ide_startstop_t (*do_request
)(struct ide_drive_s
*, struct request
*,
419 int (*ioctl
)(struct ide_drive_s
*, struct block_device
*,
420 fmode_t
, unsigned int, unsigned long);
423 /* ATAPI device flags */
425 IDE_AFLAG_DRQ_INTERRUPT
= (1 << 0),
428 /* Drive cannot eject the disc. */
429 IDE_AFLAG_NO_EJECT
= (1 << 1),
430 /* Drive is a pre ATAPI 1.2 drive. */
431 IDE_AFLAG_PRE_ATAPI12
= (1 << 2),
432 /* TOC addresses are in BCD. */
433 IDE_AFLAG_TOCADDR_AS_BCD
= (1 << 3),
434 /* TOC track numbers are in BCD. */
435 IDE_AFLAG_TOCTRACKS_AS_BCD
= (1 << 4),
436 /* Saved TOC information is current. */
437 IDE_AFLAG_TOC_VALID
= (1 << 6),
438 /* We think that the drive door is locked. */
439 IDE_AFLAG_DOOR_LOCKED
= (1 << 7),
440 /* SET_CD_SPEED command is unsupported. */
441 IDE_AFLAG_NO_SPEED_SELECT
= (1 << 8),
442 IDE_AFLAG_VERTOS_300_SSD
= (1 << 9),
443 IDE_AFLAG_VERTOS_600_ESD
= (1 << 10),
444 IDE_AFLAG_SANYO_3CD
= (1 << 11),
445 IDE_AFLAG_FULL_CAPS_PAGE
= (1 << 12),
446 IDE_AFLAG_PLAY_AUDIO_OK
= (1 << 13),
447 IDE_AFLAG_LE_SPEED_FIELDS
= (1 << 14),
450 /* Avoid commands not supported in Clik drive */
451 IDE_AFLAG_CLIK_DRIVE
= (1 << 15),
452 /* Requires BH algorithm for packets */
453 IDE_AFLAG_ZIP_DRIVE
= (1 << 16),
454 /* Supports format progress report */
455 IDE_AFLAG_SRFP
= (1 << 17),
458 IDE_AFLAG_IGNORE_DSC
= (1 << 18),
459 /* 0 When the tape position is unknown */
460 IDE_AFLAG_ADDRESS_VALID
= (1 << 19),
461 /* Device already opened */
462 IDE_AFLAG_BUSY
= (1 << 20),
463 /* Attempt to auto-detect the current user block size */
464 IDE_AFLAG_DETECT_BS
= (1 << 21),
465 /* Currently on a filemark */
466 IDE_AFLAG_FILEMARK
= (1 << 22),
467 /* 0 = no tape is loaded, so we don't rewind after ejecting */
468 IDE_AFLAG_MEDIUM_PRESENT
= (1 << 23),
470 IDE_AFLAG_NO_AUTOCLOSE
= (1 << 24),
475 /* restore settings after device reset */
476 IDE_DFLAG_KEEP_SETTINGS
= (1 << 0),
477 /* device is using DMA for read/write */
478 IDE_DFLAG_USING_DMA
= (1 << 1),
479 /* okay to unmask other IRQs */
480 IDE_DFLAG_UNMASK
= (1 << 2),
481 /* don't attempt flushes */
482 IDE_DFLAG_NOFLUSH
= (1 << 3),
484 IDE_DFLAG_DSC_OVERLAP
= (1 << 4),
485 /* give potential excess bandwidth */
486 IDE_DFLAG_NICE1
= (1 << 5),
487 /* device is physically present */
488 IDE_DFLAG_PRESENT
= (1 << 6),
489 /* disable Host Protected Area */
490 IDE_DFLAG_NOHPA
= (1 << 7),
491 /* id read from device (synthetic if not set) */
492 IDE_DFLAG_ID_READ
= (1 << 8),
493 IDE_DFLAG_NOPROBE
= (1 << 9),
494 /* need to do check_media_change() */
495 IDE_DFLAG_REMOVABLE
= (1 << 10),
496 /* needed for removable devices */
497 IDE_DFLAG_ATTACH
= (1 << 11),
498 IDE_DFLAG_FORCED_GEOM
= (1 << 12),
499 /* disallow setting unmask bit */
500 IDE_DFLAG_NO_UNMASK
= (1 << 13),
501 /* disallow enabling 32-bit I/O */
502 IDE_DFLAG_NO_IO_32BIT
= (1 << 14),
503 /* for removable only: door lock/unlock works */
504 IDE_DFLAG_DOORLOCKING
= (1 << 15),
506 IDE_DFLAG_NODMA
= (1 << 16),
507 /* powermanagement told us not to do anything, so sleep nicely */
508 IDE_DFLAG_BLOCKED
= (1 << 17),
509 /* sleeping & sleep field valid */
510 IDE_DFLAG_SLEEPING
= (1 << 18),
511 IDE_DFLAG_POST_RESET
= (1 << 19),
512 IDE_DFLAG_UDMA33_WARNED
= (1 << 20),
513 IDE_DFLAG_LBA48
= (1 << 21),
514 /* status of write cache */
515 IDE_DFLAG_WCACHE
= (1 << 22),
516 /* used for ignoring ATA_DF */
517 IDE_DFLAG_NOWERR
= (1 << 23),
518 /* retrying in PIO */
519 IDE_DFLAG_DMA_PIO_RETRY
= (1 << 24),
520 IDE_DFLAG_LBA
= (1 << 25),
521 /* don't unload heads */
522 IDE_DFLAG_NO_UNLOAD
= (1 << 26),
523 /* heads unloaded, please don't reset port */
524 IDE_DFLAG_PARKED
= (1 << 27),
525 IDE_DFLAG_MEDIA_CHANGED
= (1 << 28),
527 IDE_DFLAG_WP
= (1 << 29),
528 IDE_DFLAG_FORMAT_IN_PROGRESS
= (1 << 30),
529 IDE_DFLAG_NIEN_QUIRK
= (1 << 31),
533 char name
[4]; /* drive name, such as "hda" */
534 char driver_req
[10]; /* requests specific driver */
536 struct request_queue
*queue
; /* request queue */
538 struct request
*rq
; /* current request */
539 void *driver_data
; /* extra driver data */
540 u16
*id
; /* identification info */
541 #ifdef CONFIG_IDE_PROC_FS
542 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
543 const struct ide_proc_devset
*settings
; /* /proc/ide/ drive settings */
545 struct hwif_s
*hwif
; /* actually (ide_hwif_t *) */
547 const struct ide_disk_ops
*disk_ops
;
549 unsigned long dev_flags
;
551 unsigned long sleep
; /* sleep until this time */
552 unsigned long timeout
; /* max time to wait for irq */
554 u8 special_flags
; /* special action flags */
556 u8 select
; /* basic drive/head select reg value */
557 u8 retry_pio
; /* retrying dma capable host in pio */
558 u8 waiting_for_dma
; /* dma currently in progress */
559 u8 dma
; /* atapi dma flag */
561 u8 init_speed
; /* transfer rate set at boot */
562 u8 current_speed
; /* current transfer rate set */
563 u8 desired_speed
; /* desired transfer rate set */
564 u8 pio_mode
; /* for ->set_pio_mode _only_ */
565 u8 dma_mode
; /* for ->set_dma_mode _only_ */
566 u8 dn
; /* now wide spread use */
567 u8 acoustic
; /* acoustic management */
568 u8 media
; /* disk, cdrom, tape, floppy, ... */
569 u8 ready_stat
; /* min status value for drive ready */
570 u8 mult_count
; /* current multiple sector setting */
571 u8 mult_req
; /* requested multiple sector setting */
572 u8 io_32bit
; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
573 u8 bad_wstat
; /* used for ignoring ATA_DF */
574 u8 head
; /* "real" number of heads */
575 u8 sect
; /* "real" sectors per track */
576 u8 bios_head
; /* BIOS/fdisk/LILO number of heads */
577 u8 bios_sect
; /* BIOS/fdisk/LILO sectors per track */
579 /* delay this long before sending packet command */
582 unsigned int bios_cyl
; /* BIOS/fdisk/LILO number of cyls */
583 unsigned int cyl
; /* "real" number of cyls */
584 void *drive_data
; /* used by set_pio_mode/dev_select() */
585 unsigned int failures
; /* current failure count */
586 unsigned int max_failures
; /* maximum allowed failure count */
587 u64 probed_capacity
;/* initial/native media capacity */
588 u64 capacity64
; /* total number of sectors */
590 int lun
; /* logical unit */
591 int crc_count
; /* crc counter to reduce drive speed */
593 unsigned long debug_mask
; /* debugging levels switch */
595 #ifdef CONFIG_BLK_DEV_IDEACPI
596 struct ide_acpi_drive_link
*acpidata
;
598 struct list_head list
;
599 struct device gendev
;
600 struct completion gendev_rel_comp
; /* to deal with device release() */
602 /* current packet command */
603 struct ide_atapi_pc
*pc
;
605 /* last failed packet command */
606 struct ide_atapi_pc
*failed_pc
;
608 /* callback for packet commands */
609 int (*pc_callback
)(struct ide_drive_s
*, int);
611 ide_startstop_t (*irq_handler
)(struct ide_drive_s
*);
613 unsigned long atapi_flags
;
615 struct ide_atapi_pc request_sense_pc
;
617 /* current sense rq and buffer */
619 struct request
*sense_rq
;
620 struct request_sense sense_data
;
623 typedef struct ide_drive_s ide_drive_t
;
625 #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
627 #define to_ide_drv(obj, cont_type) \
628 container_of(obj, struct cont_type, dev)
630 #define ide_drv_g(disk, cont_type) \
631 container_of((disk)->private_data, struct cont_type, driver)
633 struct ide_port_info
;
636 void (*exec_command
)(struct hwif_s
*, u8
);
637 u8 (*read_status
)(struct hwif_s
*);
638 u8 (*read_altstatus
)(struct hwif_s
*);
639 void (*write_devctl
)(struct hwif_s
*, u8
);
641 void (*dev_select
)(ide_drive_t
*);
642 void (*tf_load
)(ide_drive_t
*, struct ide_taskfile
*, u8
);
643 void (*tf_read
)(ide_drive_t
*, struct ide_taskfile
*, u8
);
645 void (*input_data
)(ide_drive_t
*, struct ide_cmd
*,
646 void *, unsigned int);
647 void (*output_data
)(ide_drive_t
*, struct ide_cmd
*,
648 void *, unsigned int);
651 extern const struct ide_tp_ops default_tp_ops
;
654 * struct ide_port_ops - IDE port operations
656 * @init_dev: host specific initialization of a device
657 * @set_pio_mode: routine to program host for PIO mode
658 * @set_dma_mode: routine to program host for DMA mode
659 * @reset_poll: chipset polling based on hba specifics
660 * @pre_reset: chipset specific changes to default for device-hba resets
661 * @resetproc: routine to reset controller after a disk reset
662 * @maskproc: special host masking for drive selection
663 * @quirkproc: check host's drive quirk list
664 * @clear_irq: clear IRQ
666 * @mdma_filter: filter MDMA modes
667 * @udma_filter: filter UDMA modes
669 * @cable_detect: detect cable type
671 struct ide_port_ops
{
672 void (*init_dev
)(ide_drive_t
*);
673 void (*set_pio_mode
)(struct hwif_s
*, ide_drive_t
*);
674 void (*set_dma_mode
)(struct hwif_s
*, ide_drive_t
*);
675 blk_status_t (*reset_poll
)(ide_drive_t
*);
676 void (*pre_reset
)(ide_drive_t
*);
677 void (*resetproc
)(ide_drive_t
*);
678 void (*maskproc
)(ide_drive_t
*, int);
679 void (*quirkproc
)(ide_drive_t
*);
680 void (*clear_irq
)(ide_drive_t
*);
681 int (*test_irq
)(struct hwif_s
*);
683 u8 (*mdma_filter
)(ide_drive_t
*);
684 u8 (*udma_filter
)(ide_drive_t
*);
686 u8 (*cable_detect
)(struct hwif_s
*);
690 void (*dma_host_set
)(struct ide_drive_s
*, int);
691 int (*dma_setup
)(struct ide_drive_s
*, struct ide_cmd
*);
692 void (*dma_start
)(struct ide_drive_s
*);
693 int (*dma_end
)(struct ide_drive_s
*);
694 int (*dma_test_irq
)(struct ide_drive_s
*);
695 void (*dma_lost_irq
)(struct ide_drive_s
*);
696 /* below ones are optional */
697 int (*dma_check
)(struct ide_drive_s
*, struct ide_cmd
*);
698 int (*dma_timer_expiry
)(struct ide_drive_s
*);
699 void (*dma_clear
)(struct ide_drive_s
*);
701 * The following method is optional and only required to be
702 * implemented for the SFF-8038i compatible controllers.
704 u8 (*dma_sff_read_status
)(struct hwif_s
*);
708 IDE_PFLAG_PROBING
= (1 << 0),
713 typedef struct hwif_s
{
714 struct hwif_s
*mate
; /* other hwif from same PCI chip */
715 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
717 struct ide_host
*host
;
719 char name
[6]; /* name of interface, eg. "ide0" */
721 struct ide_io_ports io_ports
;
723 unsigned long sata_scr
[SATA_NR_PORTS
];
725 ide_drive_t
*devices
[MAX_DRIVES
+ 1];
727 unsigned long port_flags
;
729 u8 major
; /* our major number */
730 u8 index
; /* 0 for ide0; 1 for ide1; ... */
731 u8 channel
; /* for dual-port chips: 0=primary, 1=secondary */
741 u8 cbl
; /* cable type */
743 hwif_chipset_t chipset
; /* sub-module for tuning.. */
747 void (*rw_disk
)(ide_drive_t
*, struct request
*);
749 const struct ide_tp_ops
*tp_ops
;
750 const struct ide_port_ops
*port_ops
;
751 const struct ide_dma_ops
*dma_ops
;
753 /* dma physical region descriptor table (cpu view) */
754 unsigned int *dmatable_cpu
;
755 /* dma physical region descriptor table (dma view) */
756 dma_addr_t dmatable_dma
;
758 /* maximum number of PRD table entries */
760 /* PRD entry size in bytes */
763 /* Scatter-gather list used to build the above */
764 struct scatterlist
*sg_table
;
765 int sg_max_nents
; /* Maximum number of entries in it */
767 struct ide_cmd cmd
; /* current command */
769 int rqsize
; /* max sectors per request */
770 int irq
; /* our irq number */
772 unsigned long dma_base
; /* base addr for dma ports */
774 unsigned long config_data
; /* for use by chipset-specific code */
775 unsigned long select_data
; /* for use by chipset-specific code */
777 unsigned long extra_base
; /* extra addr for dma ports */
778 unsigned extra_ports
; /* number of extra dma ports */
780 unsigned present
: 1; /* this interface exists */
781 unsigned busy
: 1; /* serializes devices on a port */
783 struct device gendev
;
784 struct device
*portdev
;
786 struct completion gendev_rel_comp
; /* To deal with device release() */
788 void *hwif_data
; /* extra hwif data */
790 #ifdef CONFIG_BLK_DEV_IDEACPI
791 struct ide_acpi_hwif_link
*acpidata
;
794 /* IRQ handler, if active */
795 ide_startstop_t (*handler
)(ide_drive_t
*);
797 /* BOOL: polling active & poll_timeout field valid */
798 unsigned int polling
: 1;
801 ide_drive_t
*cur_dev
;
803 /* current request */
807 struct timer_list timer
;
808 /* timeout value during long polls */
809 unsigned long poll_timeout
;
810 /* queried upon timeouts */
811 int (*expiry
)(ide_drive_t
*);
817 } ____cacheline_internodealigned_in_smp ide_hwif_t
;
819 #define MAX_HOST_PORTS 4
822 ide_hwif_t
*ports
[MAX_HOST_PORTS
+ 1];
823 unsigned int n_ports
;
824 struct device
*dev
[2];
826 int (*init_chipset
)(struct pci_dev
*);
828 void (*get_lock
)(irq_handler_t
, void *);
829 void (*release_lock
)(void);
831 irq_handler_t irq_handler
;
833 unsigned long host_flags
;
838 ide_hwif_t
*cur_port
; /* for hosts requiring serialization */
840 /* used for hosts requiring serialization */
841 volatile unsigned long host_busy
;
844 #define IDE_HOST_BUSY 0
847 * internal ide interrupt handler type
849 typedef ide_startstop_t (ide_handler_t
)(ide_drive_t
*);
850 typedef int (ide_expiry_t
)(ide_drive_t
*);
852 /* used by ide-cd, ide-floppy, etc. */
853 typedef void (xfer_func_t
)(ide_drive_t
*, struct ide_cmd
*, void *, unsigned);
855 extern struct mutex ide_setting_mtx
;
858 * configurable drive settings
861 #define DS_SYNC (1 << 0)
864 int (*get
)(ide_drive_t
*);
865 int (*set
)(ide_drive_t
*, int);
869 #define __DEVSET(_flags, _get, _set) { \
875 #define ide_devset_get(name, field) \
876 static int get_##name(ide_drive_t *drive) \
878 return drive->field; \
881 #define ide_devset_set(name, field) \
882 static int set_##name(ide_drive_t *drive, int arg) \
884 drive->field = arg; \
888 #define ide_devset_get_flag(name, flag) \
889 static int get_##name(ide_drive_t *drive) \
891 return !!(drive->dev_flags & flag); \
894 #define ide_devset_set_flag(name, flag) \
895 static int set_##name(ide_drive_t *drive, int arg) \
898 drive->dev_flags |= flag; \
900 drive->dev_flags &= ~flag; \
904 #define __IDE_DEVSET(_name, _flags, _get, _set) \
905 const struct ide_devset ide_devset_##_name = \
906 __DEVSET(_flags, _get, _set)
908 #define IDE_DEVSET(_name, _flags, _get, _set) \
909 static __IDE_DEVSET(_name, _flags, _get, _set)
911 #define ide_devset_rw(_name, _func) \
912 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
914 #define ide_devset_w(_name, _func) \
915 IDE_DEVSET(_name, 0, NULL, set_##_func)
917 #define ide_ext_devset_rw(_name, _func) \
918 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
920 #define ide_ext_devset_rw_sync(_name, _func) \
921 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
923 #define ide_decl_devset(_name) \
924 extern const struct ide_devset ide_devset_##_name
926 ide_decl_devset(io_32bit
);
927 ide_decl_devset(keepsettings
);
928 ide_decl_devset(pio_mode
);
929 ide_decl_devset(unmaskirq
);
930 ide_decl_devset(using_dma
);
932 #ifdef CONFIG_IDE_PROC_FS
934 * /proc/ide interface
937 #define ide_devset_rw_field(_name, _field) \
938 ide_devset_get(_name, _field); \
939 ide_devset_set(_name, _field); \
940 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
942 #define ide_devset_rw_flag(_name, _field) \
943 ide_devset_get_flag(_name, _field); \
944 ide_devset_set_flag(_name, _field); \
945 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
947 struct ide_proc_devset
{
949 const struct ide_devset
*setting
;
951 int (*mulf
)(ide_drive_t
*);
952 int (*divf
)(ide_drive_t
*);
955 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
956 .name = __stringify(_name), \
957 .setting = &ide_devset_##_name, \
964 #define IDE_PROC_DEVSET(_name, _min, _max) \
965 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
970 const struct file_operations
*proc_fops
;
973 void proc_ide_create(void);
974 void proc_ide_destroy(void);
975 void ide_proc_register_port(ide_hwif_t
*);
976 void ide_proc_port_register_devices(ide_hwif_t
*);
977 void ide_proc_unregister_device(ide_drive_t
*);
978 void ide_proc_unregister_port(ide_hwif_t
*);
979 void ide_proc_register_driver(ide_drive_t
*, struct ide_driver
*);
980 void ide_proc_unregister_driver(ide_drive_t
*, struct ide_driver
*);
982 extern const struct file_operations ide_capacity_proc_fops
;
983 extern const struct file_operations ide_geometry_proc_fops
;
985 static inline void proc_ide_create(void) { ; }
986 static inline void proc_ide_destroy(void) { ; }
987 static inline void ide_proc_register_port(ide_hwif_t
*hwif
) { ; }
988 static inline void ide_proc_port_register_devices(ide_hwif_t
*hwif
) { ; }
989 static inline void ide_proc_unregister_device(ide_drive_t
*drive
) { ; }
990 static inline void ide_proc_unregister_port(ide_hwif_t
*hwif
) { ; }
991 static inline void ide_proc_register_driver(ide_drive_t
*drive
,
992 struct ide_driver
*driver
) { ; }
993 static inline void ide_proc_unregister_driver(ide_drive_t
*drive
,
994 struct ide_driver
*driver
) { ; }
998 /* enter/exit functions */
999 IDE_DBG_FUNC
= (1 << 0),
1000 /* sense key/asc handling */
1001 IDE_DBG_SENSE
= (1 << 1),
1002 /* packet commands handling */
1003 IDE_DBG_PC
= (1 << 2),
1004 /* request handling */
1005 IDE_DBG_RQ
= (1 << 3),
1006 /* driver probing/setup */
1007 IDE_DBG_PROBE
= (1 << 4),
1010 /* DRV_NAME has to be defined in the driver before using the macro below */
1011 #define __ide_debug_log(lvl, fmt, args...) \
1013 if (unlikely(drive->debug_mask & lvl)) \
1014 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
1015 __func__, ## args); \
1019 * Power Management state machine (rq->pm->pm_step).
1021 * For each step, the core calls ide_start_power_step() first.
1023 * - ide_stopped : In this case, the core calls us back again unless
1024 * step have been set to ide_power_state_completed.
1025 * - ide_started : In this case, the channel is left busy until an
1026 * async event (interrupt) occurs.
1027 * Typically, ide_start_power_step() will issue a taskfile request with
1030 * Upon reception of the interrupt, the core will call ide_complete_power_step()
1031 * with the error code if any. This routine should update the step value
1032 * and return. It should not start a new request. The core will call
1033 * ide_start_power_step() for the new step value, unless step have been
1034 * set to IDE_PM_COMPLETED.
1037 IDE_PM_START_SUSPEND
,
1038 IDE_PM_FLUSH_CACHE
= IDE_PM_START_SUSPEND
,
1041 IDE_PM_START_RESUME
,
1042 IDE_PM_RESTORE_PIO
= IDE_PM_START_RESUME
,
1049 int generic_ide_suspend(struct device
*, pm_message_t
);
1050 int generic_ide_resume(struct device
*);
1052 void ide_complete_power_step(ide_drive_t
*, struct request
*);
1053 ide_startstop_t
ide_start_power_step(ide_drive_t
*, struct request
*);
1054 void ide_complete_pm_rq(ide_drive_t
*, struct request
*);
1055 void ide_check_pm_state(ide_drive_t
*, struct request
*);
1058 * Subdrivers support.
1060 * The gendriver.owner field should be set to the module owner of this driver.
1061 * The gendriver.name field should be set to the name of this driver
1064 const char *version
;
1065 ide_startstop_t (*do_request
)(ide_drive_t
*, struct request
*, sector_t
);
1066 struct device_driver gen_driver
;
1067 int (*probe
)(ide_drive_t
*);
1068 void (*remove
)(ide_drive_t
*);
1069 void (*resume
)(ide_drive_t
*);
1070 void (*shutdown
)(ide_drive_t
*);
1071 #ifdef CONFIG_IDE_PROC_FS
1072 ide_proc_entry_t
* (*proc_entries
)(ide_drive_t
*);
1073 const struct ide_proc_devset
* (*proc_devsets
)(ide_drive_t
*);
1077 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1079 int ide_device_get(ide_drive_t
*);
1080 void ide_device_put(ide_drive_t
*);
1082 struct ide_ioctl_devset
{
1083 unsigned int get_ioctl
;
1084 unsigned int set_ioctl
;
1085 const struct ide_devset
*setting
;
1088 int ide_setting_ioctl(ide_drive_t
*, struct block_device
*, unsigned int,
1089 unsigned long, const struct ide_ioctl_devset
*);
1091 int generic_ide_ioctl(ide_drive_t
*, struct block_device
*, unsigned, unsigned long);
1093 extern int ide_vlb_clk
;
1094 extern int ide_pci_clk
;
1096 int ide_end_rq(ide_drive_t
*, struct request
*, blk_status_t
, unsigned int);
1097 void ide_kill_rq(ide_drive_t
*, struct request
*);
1099 void __ide_set_handler(ide_drive_t
*, ide_handler_t
*, unsigned int);
1100 void ide_set_handler(ide_drive_t
*, ide_handler_t
*, unsigned int);
1102 void ide_execute_command(ide_drive_t
*, struct ide_cmd
*, ide_handler_t
*,
1105 void ide_pad_transfer(ide_drive_t
*, int, int);
1107 ide_startstop_t
ide_error(ide_drive_t
*, const char *, u8
);
1109 void ide_fix_driveid(u16
*);
1111 extern void ide_fixstring(u8
*, const int, const int);
1113 int ide_busy_sleep(ide_drive_t
*, unsigned long, int);
1115 int __ide_wait_stat(ide_drive_t
*, u8
, u8
, unsigned long, u8
*);
1116 int ide_wait_stat(ide_startstop_t
*, ide_drive_t
*, u8
, u8
, unsigned long);
1118 ide_startstop_t
ide_do_park_unpark(ide_drive_t
*, struct request
*);
1119 ide_startstop_t
ide_do_devset(ide_drive_t
*, struct request
*);
1121 extern ide_startstop_t
ide_do_reset (ide_drive_t
*);
1123 extern int ide_devset_execute(ide_drive_t
*drive
,
1124 const struct ide_devset
*setting
, int arg
);
1126 void ide_complete_cmd(ide_drive_t
*, struct ide_cmd
*, u8
, u8
);
1127 int ide_complete_rq(ide_drive_t
*, blk_status_t
, unsigned int);
1129 void ide_tf_readback(ide_drive_t
*drive
, struct ide_cmd
*cmd
);
1130 void ide_tf_dump(const char *, struct ide_cmd
*);
1132 void ide_exec_command(ide_hwif_t
*, u8
);
1133 u8
ide_read_status(ide_hwif_t
*);
1134 u8
ide_read_altstatus(ide_hwif_t
*);
1135 void ide_write_devctl(ide_hwif_t
*, u8
);
1137 void ide_dev_select(ide_drive_t
*);
1138 void ide_tf_load(ide_drive_t
*, struct ide_taskfile
*, u8
);
1139 void ide_tf_read(ide_drive_t
*, struct ide_taskfile
*, u8
);
1141 void ide_input_data(ide_drive_t
*, struct ide_cmd
*, void *, unsigned int);
1142 void ide_output_data(ide_drive_t
*, struct ide_cmd
*, void *, unsigned int);
1144 void SELECT_MASK(ide_drive_t
*, int);
1146 u8
ide_read_error(ide_drive_t
*);
1147 void ide_read_bcount_and_ireason(ide_drive_t
*, u16
*, u8
*);
1149 int ide_check_ireason(ide_drive_t
*, struct request
*, int, int, int);
1151 int ide_check_atapi_device(ide_drive_t
*, const char *);
1153 void ide_init_pc(struct ide_atapi_pc
*);
1155 /* Disk head parking */
1156 extern wait_queue_head_t ide_park_wq
;
1157 ssize_t
ide_park_show(struct device
*dev
, struct device_attribute
*attr
,
1159 ssize_t
ide_park_store(struct device
*dev
, struct device_attribute
*attr
,
1160 const char *buf
, size_t len
);
1163 * Special requests for ide-tape block device strategy routine.
1165 * In order to service a character device command, we add special requests to
1166 * the tail of our block device request queue and wait for their completion.
1169 REQ_IDETAPE_PC1
= (1 << 0), /* packet command (first stage) */
1170 REQ_IDETAPE_PC2
= (1 << 1), /* packet command (second stage) */
1171 REQ_IDETAPE_READ
= (1 << 2),
1172 REQ_IDETAPE_WRITE
= (1 << 3),
1175 int ide_queue_pc_tail(ide_drive_t
*, struct gendisk
*, struct ide_atapi_pc
*,
1176 void *, unsigned int);
1178 int ide_do_test_unit_ready(ide_drive_t
*, struct gendisk
*);
1179 int ide_do_start_stop(ide_drive_t
*, struct gendisk
*, int);
1180 int ide_set_media_lock(ide_drive_t
*, struct gendisk
*, int);
1181 void ide_create_request_sense_cmd(ide_drive_t
*, struct ide_atapi_pc
*);
1182 void ide_retry_pc(ide_drive_t
*drive
);
1184 void ide_prep_sense(ide_drive_t
*drive
, struct request
*rq
);
1185 int ide_queue_sense_rq(ide_drive_t
*drive
, void *special
);
1187 int ide_cd_expiry(ide_drive_t
*);
1189 int ide_cd_get_xferlen(struct request
*);
1191 ide_startstop_t
ide_issue_pc(ide_drive_t
*, struct ide_cmd
*);
1193 ide_startstop_t
do_rw_taskfile(ide_drive_t
*, struct ide_cmd
*);
1195 void ide_pio_bytes(ide_drive_t
*, struct ide_cmd
*, unsigned int, unsigned int);
1197 void ide_finish_cmd(ide_drive_t
*, struct ide_cmd
*, u8
);
1199 int ide_raw_taskfile(ide_drive_t
*, struct ide_cmd
*, u8
*, u16
);
1200 int ide_no_data_taskfile(ide_drive_t
*, struct ide_cmd
*);
1202 int ide_taskfile_ioctl(ide_drive_t
*, unsigned long);
1204 int ide_dev_read_id(ide_drive_t
*, u8
, u16
*, int);
1206 extern int ide_driveid_update(ide_drive_t
*);
1207 extern int ide_config_drive_speed(ide_drive_t
*, u8
);
1208 extern u8
eighty_ninty_three (ide_drive_t
*);
1209 extern int taskfile_lib_get_identify(ide_drive_t
*drive
, u8
*);
1211 extern int ide_wait_not_busy(ide_hwif_t
*hwif
, unsigned long timeout
);
1213 extern void ide_stall_queue(ide_drive_t
*drive
, unsigned long timeout
);
1215 extern void ide_timer_expiry(struct timer_list
*t
);
1216 extern irqreturn_t
ide_intr(int irq
, void *dev_id
);
1217 extern void do_ide_request(struct request_queue
*);
1218 extern void ide_requeue_and_plug(ide_drive_t
*drive
, struct request
*rq
);
1220 void ide_init_disk(struct gendisk
*, ide_drive_t
*);
1222 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1223 extern int __ide_pci_register_driver(struct pci_driver
*driver
, struct module
*owner
, const char *mod_name
);
1224 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1226 #define ide_pci_register_driver(d) pci_register_driver(d)
1229 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev
*dev
)
1231 if ((dev
->class >> 8) == PCI_CLASS_STORAGE_IDE
&& (dev
->class & 5) != 5)
1236 void ide_pci_setup_ports(struct pci_dev
*, const struct ide_port_info
*,
1237 struct ide_hw
*, struct ide_hw
**);
1238 void ide_setup_pci_noise(struct pci_dev
*, const struct ide_port_info
*);
1240 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1241 int ide_pci_set_master(struct pci_dev
*, const char *);
1242 unsigned long ide_pci_dma_base(ide_hwif_t
*, const struct ide_port_info
*);
1243 int ide_pci_check_simplex(ide_hwif_t
*, const struct ide_port_info
*);
1244 int ide_hwif_setup_dma(ide_hwif_t
*, const struct ide_port_info
*);
1246 static inline int ide_hwif_setup_dma(ide_hwif_t
*hwif
,
1247 const struct ide_port_info
*d
)
1253 struct ide_pci_enablebit
{
1254 u8 reg
; /* byte pci reg holding the enable-bit */
1255 u8 mask
; /* mask to isolate the enable-bit */
1256 u8 val
; /* value of masked reg when "enabled" */
1260 /* Uses ISA control ports not PCI ones. */
1261 IDE_HFLAG_ISA_PORTS
= (1 << 0),
1262 /* single port device */
1263 IDE_HFLAG_SINGLE
= (1 << 1),
1264 /* don't use legacy PIO blacklist */
1265 IDE_HFLAG_PIO_NO_BLACKLIST
= (1 << 2),
1266 /* set for the second port of QD65xx */
1267 IDE_HFLAG_QD_2ND_PORT
= (1 << 3),
1268 /* use PIO8/9 for prefetch off/on */
1269 IDE_HFLAG_ABUSE_PREFETCH
= (1 << 4),
1270 /* use PIO6/7 for fast-devsel off/on */
1271 IDE_HFLAG_ABUSE_FAST_DEVSEL
= (1 << 5),
1272 /* use 100-102 and 200-202 PIO values to set DMA modes */
1273 IDE_HFLAG_ABUSE_DMA_MODES
= (1 << 6),
1275 * keep DMA setting when programming PIO mode, may be used only
1276 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1278 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA
= (1 << 7),
1279 /* program host for the transfer mode after programming device */
1280 IDE_HFLAG_POST_SET_MODE
= (1 << 8),
1281 /* don't program host/device for the transfer mode ("smart" hosts) */
1282 IDE_HFLAG_NO_SET_MODE
= (1 << 9),
1283 /* trust BIOS for programming chipset/device for DMA */
1284 IDE_HFLAG_TRUST_BIOS_FOR_DMA
= (1 << 10),
1285 /* host is CS5510/CS5520 */
1286 IDE_HFLAG_CS5520
= (1 << 11),
1287 /* ATAPI DMA is unsupported */
1288 IDE_HFLAG_NO_ATAPI_DMA
= (1 << 12),
1289 /* set if host is a "non-bootable" controller */
1290 IDE_HFLAG_NON_BOOTABLE
= (1 << 13),
1291 /* host doesn't support DMA */
1292 IDE_HFLAG_NO_DMA
= (1 << 14),
1293 /* check if host is PCI IDE device before allowing DMA */
1294 IDE_HFLAG_NO_AUTODMA
= (1 << 15),
1295 /* host uses MMIO */
1296 IDE_HFLAG_MMIO
= (1 << 16),
1298 IDE_HFLAG_NO_LBA48
= (1 << 17),
1300 IDE_HFLAG_NO_LBA48_DMA
= (1 << 18),
1301 /* data FIFO is cleared by an error */
1302 IDE_HFLAG_ERROR_STOPS_FIFO
= (1 << 19),
1303 /* serialize ports */
1304 IDE_HFLAG_SERIALIZE
= (1 << 20),
1305 /* host is DTC2278 */
1306 IDE_HFLAG_DTC2278
= (1 << 21),
1307 /* 4 devices on a single set of I/O ports */
1308 IDE_HFLAG_4DRIVES
= (1 << 22),
1309 /* host is TRM290 */
1310 IDE_HFLAG_TRM290
= (1 << 23),
1311 /* use 32-bit I/O ops */
1312 IDE_HFLAG_IO_32BIT
= (1 << 24),
1314 IDE_HFLAG_UNMASK_IRQS
= (1 << 25),
1315 IDE_HFLAG_BROKEN_ALTSTATUS
= (1 << 26),
1316 /* serialize ports if DMA is possible (for sl82c105) */
1317 IDE_HFLAG_SERIALIZE_DMA
= (1 << 27),
1318 /* force host out of "simplex" mode */
1319 IDE_HFLAG_CLEAR_SIMPLEX
= (1 << 28),
1320 /* DSC overlap is unsupported */
1321 IDE_HFLAG_NO_DSC
= (1 << 29),
1322 /* never use 32-bit I/O ops */
1323 IDE_HFLAG_NO_IO_32BIT
= (1 << 30),
1324 /* never unmask IRQs */
1325 IDE_HFLAG_NO_UNMASK_IRQS
= (1 << 31),
1328 #ifdef CONFIG_BLK_DEV_OFFBOARD
1329 # define IDE_HFLAG_OFF_BOARD 0
1331 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1334 struct ide_port_info
{
1337 int (*init_chipset
)(struct pci_dev
*);
1339 void (*get_lock
)(irq_handler_t
, void *);
1340 void (*release_lock
)(void);
1342 void (*init_iops
)(ide_hwif_t
*);
1343 void (*init_hwif
)(ide_hwif_t
*);
1344 int (*init_dma
)(ide_hwif_t
*,
1345 const struct ide_port_info
*);
1347 const struct ide_tp_ops
*tp_ops
;
1348 const struct ide_port_ops
*port_ops
;
1349 const struct ide_dma_ops
*dma_ops
;
1351 struct ide_pci_enablebit enablebits
[2];
1353 hwif_chipset_t chipset
;
1355 u16 max_sectors
; /* if < than the default one */
1368 * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME
1371 struct ide_pm_state
{
1372 /* PM state machine step value, currently driver specific */
1374 /* requested PM state value (S1, S2, S3, S4, ...) */
1376 void* data
; /* for driver use */
1380 int ide_pci_init_one(struct pci_dev
*, const struct ide_port_info
*, void *);
1381 int ide_pci_init_two(struct pci_dev
*, struct pci_dev
*,
1382 const struct ide_port_info
*, void *);
1383 void ide_pci_remove(struct pci_dev
*);
1386 int ide_pci_suspend(struct pci_dev
*, pm_message_t
);
1387 int ide_pci_resume(struct pci_dev
*);
1389 #define ide_pci_suspend NULL
1390 #define ide_pci_resume NULL
1393 void ide_map_sg(ide_drive_t
*, struct ide_cmd
*);
1394 void ide_init_sg_cmd(struct ide_cmd
*, unsigned int);
1396 #define BAD_DMA_DRIVE 0
1397 #define GOOD_DMA_DRIVE 1
1399 struct drive_list_entry
{
1400 const char *id_model
;
1401 const char *id_firmware
;
1404 int ide_in_drive_list(u16
*, const struct drive_list_entry
*);
1406 #ifdef CONFIG_BLK_DEV_IDEDMA
1407 int ide_dma_good_drive(ide_drive_t
*);
1408 int __ide_dma_bad_drive(ide_drive_t
*);
1410 u8
ide_find_dma_mode(ide_drive_t
*, u8
);
1412 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
)
1414 return ide_find_dma_mode(drive
, XFER_UDMA_6
);
1417 void ide_dma_off_quietly(ide_drive_t
*);
1418 void ide_dma_off(ide_drive_t
*);
1419 void ide_dma_on(ide_drive_t
*);
1420 int ide_set_dma(ide_drive_t
*);
1421 void ide_check_dma_crc(ide_drive_t
*);
1422 ide_startstop_t
ide_dma_intr(ide_drive_t
*);
1424 int ide_allocate_dma_engine(ide_hwif_t
*);
1425 void ide_release_dma_engine(ide_hwif_t
*);
1427 int ide_dma_prepare(ide_drive_t
*, struct ide_cmd
*);
1428 void ide_dma_unmap_sg(ide_drive_t
*, struct ide_cmd
*);
1430 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1431 int config_drive_for_dma(ide_drive_t
*);
1432 int ide_build_dmatable(ide_drive_t
*, struct ide_cmd
*);
1433 void ide_dma_host_set(ide_drive_t
*, int);
1434 int ide_dma_setup(ide_drive_t
*, struct ide_cmd
*);
1435 extern void ide_dma_start(ide_drive_t
*);
1436 int ide_dma_end(ide_drive_t
*);
1437 int ide_dma_test_irq(ide_drive_t
*);
1438 int ide_dma_sff_timer_expiry(ide_drive_t
*);
1439 u8
ide_dma_sff_read_status(ide_hwif_t
*);
1440 extern const struct ide_dma_ops sff_dma_ops
;
1442 static inline int config_drive_for_dma(ide_drive_t
*drive
) { return 0; }
1443 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1445 void ide_dma_lost_irq(ide_drive_t
*);
1446 ide_startstop_t
ide_dma_timeout_retry(ide_drive_t
*, int);
1449 static inline u8
ide_find_dma_mode(ide_drive_t
*drive
, u8 speed
) { return 0; }
1450 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
) { return 0; }
1451 static inline void ide_dma_off_quietly(ide_drive_t
*drive
) { ; }
1452 static inline void ide_dma_off(ide_drive_t
*drive
) { ; }
1453 static inline void ide_dma_on(ide_drive_t
*drive
) { ; }
1454 static inline void ide_dma_verbose(ide_drive_t
*drive
) { ; }
1455 static inline int ide_set_dma(ide_drive_t
*drive
) { return 1; }
1456 static inline void ide_check_dma_crc(ide_drive_t
*drive
) { ; }
1457 static inline ide_startstop_t
ide_dma_intr(ide_drive_t
*drive
) { return ide_stopped
; }
1458 static inline ide_startstop_t
ide_dma_timeout_retry(ide_drive_t
*drive
, int error
) { return ide_stopped
; }
1459 static inline void ide_release_dma_engine(ide_hwif_t
*hwif
) { ; }
1460 static inline int ide_dma_prepare(ide_drive_t
*drive
,
1461 struct ide_cmd
*cmd
) { return 1; }
1462 static inline void ide_dma_unmap_sg(ide_drive_t
*drive
,
1463 struct ide_cmd
*cmd
) { ; }
1464 #endif /* CONFIG_BLK_DEV_IDEDMA */
1466 #ifdef CONFIG_BLK_DEV_IDEACPI
1467 int ide_acpi_init(void);
1468 bool ide_port_acpi(ide_hwif_t
*hwif
);
1469 extern int ide_acpi_exec_tfs(ide_drive_t
*drive
);
1470 extern void ide_acpi_get_timing(ide_hwif_t
*hwif
);
1471 extern void ide_acpi_push_timing(ide_hwif_t
*hwif
);
1472 void ide_acpi_init_port(ide_hwif_t
*);
1473 void ide_acpi_port_init_devices(ide_hwif_t
*);
1474 extern void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
);
1476 static inline int ide_acpi_init(void) { return 0; }
1477 static inline bool ide_port_acpi(ide_hwif_t
*hwif
) { return 0; }
1478 static inline int ide_acpi_exec_tfs(ide_drive_t
*drive
) { return 0; }
1479 static inline void ide_acpi_get_timing(ide_hwif_t
*hwif
) { ; }
1480 static inline void ide_acpi_push_timing(ide_hwif_t
*hwif
) { ; }
1481 static inline void ide_acpi_init_port(ide_hwif_t
*hwif
) { ; }
1482 static inline void ide_acpi_port_init_devices(ide_hwif_t
*hwif
) { ; }
1483 static inline void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
) {}
1486 void ide_register_region(struct gendisk
*);
1487 void ide_unregister_region(struct gendisk
*);
1489 void ide_check_nien_quirk_list(ide_drive_t
*);
1490 void ide_undecoded_slave(ide_drive_t
*);
1492 void ide_port_apply_params(ide_hwif_t
*);
1493 int ide_sysfs_register_port(ide_hwif_t
*);
1495 struct ide_host
*ide_host_alloc(const struct ide_port_info
*, struct ide_hw
**,
1497 void ide_host_free(struct ide_host
*);
1498 int ide_host_register(struct ide_host
*, const struct ide_port_info
*,
1500 int ide_host_add(const struct ide_port_info
*, struct ide_hw
**, unsigned int,
1501 struct ide_host
**);
1502 void ide_host_remove(struct ide_host
*);
1503 int ide_legacy_device_add(const struct ide_port_info
*, unsigned long);
1504 void ide_port_unregister_devices(ide_hwif_t
*);
1505 void ide_port_scan(ide_hwif_t
*);
1507 static inline void *ide_get_hwifdata (ide_hwif_t
* hwif
)
1509 return hwif
->hwif_data
;
1512 static inline void ide_set_hwifdata (ide_hwif_t
* hwif
, void *data
)
1514 hwif
->hwif_data
= data
;
1517 extern void ide_toggle_bounce(ide_drive_t
*drive
, int on
);
1519 u64
ide_get_lba_addr(struct ide_cmd
*, int);
1520 u8
ide_dump_status(ide_drive_t
*, const char *, u8
);
1525 u16 act8b
; /* t2 for 8-bit io */
1526 u16 rec8b
; /* t2i for 8-bit io */
1527 u16 cyc8b
; /* t0 for 8-bit io */
1528 u16 active
; /* t2 or tD */
1529 u16 recover
; /* t2i or tK */
1531 u16 udma
; /* t2CYCTYP/2 */
1535 IDE_TIMING_SETUP
= (1 << 0),
1536 IDE_TIMING_ACT8B
= (1 << 1),
1537 IDE_TIMING_REC8B
= (1 << 2),
1538 IDE_TIMING_CYC8B
= (1 << 3),
1539 IDE_TIMING_8BIT
= IDE_TIMING_ACT8B
| IDE_TIMING_REC8B
|
1541 IDE_TIMING_ACTIVE
= (1 << 4),
1542 IDE_TIMING_RECOVER
= (1 << 5),
1543 IDE_TIMING_CYCLE
= (1 << 6),
1544 IDE_TIMING_UDMA
= (1 << 7),
1545 IDE_TIMING_ALL
= IDE_TIMING_SETUP
| IDE_TIMING_8BIT
|
1546 IDE_TIMING_ACTIVE
| IDE_TIMING_RECOVER
|
1547 IDE_TIMING_CYCLE
| IDE_TIMING_UDMA
,
1550 struct ide_timing
*ide_timing_find_mode(u8
);
1551 u16
ide_pio_cycle_time(ide_drive_t
*, u8
);
1552 void ide_timing_merge(struct ide_timing
*, struct ide_timing
*,
1553 struct ide_timing
*, unsigned int);
1554 int ide_timing_compute(ide_drive_t
*, u8
, struct ide_timing
*, int, int);
1556 #ifdef CONFIG_IDE_XFER_MODE
1557 int ide_scan_pio_blacklist(char *);
1558 const char *ide_xfer_verbose(u8
);
1559 int ide_pio_need_iordy(ide_drive_t
*, const u8
);
1560 int ide_set_pio_mode(ide_drive_t
*, u8
);
1561 int ide_set_dma_mode(ide_drive_t
*, u8
);
1562 void ide_set_pio(ide_drive_t
*, u8
);
1563 int ide_set_xfer_rate(ide_drive_t
*, u8
);
1565 static inline void ide_set_pio(ide_drive_t
*drive
, u8 pio
) { ; }
1566 static inline int ide_set_xfer_rate(ide_drive_t
*drive
, u8 rate
) { return -1; }
1569 static inline void ide_set_max_pio(ide_drive_t
*drive
)
1571 ide_set_pio(drive
, 255);
1574 char *ide_media_string(ide_drive_t
*);
1576 extern const struct attribute_group
*ide_dev_groups
[];
1577 extern struct bus_type ide_bus_type
;
1578 extern struct class *ide_port_class
;
1580 static inline void ide_dump_identify(u8
*id
)
1582 print_hex_dump(KERN_INFO
, "", DUMP_PREFIX_NONE
, 16, 2, id
, 512, 0);
1585 static inline int hwif_to_node(ide_hwif_t
*hwif
)
1587 return hwif
->dev
? dev_to_node(hwif
->dev
) : -1;
1590 static inline ide_drive_t
*ide_get_pair_dev(ide_drive_t
*drive
)
1592 ide_drive_t
*peer
= drive
->hwif
->devices
[(drive
->dn
^ 1) & 1];
1594 return (peer
->dev_flags
& IDE_DFLAG_PRESENT
) ? peer
: NULL
;
1597 static inline void *ide_get_drivedata(ide_drive_t
*drive
)
1599 return drive
->drive_data
;
1602 static inline void ide_set_drivedata(ide_drive_t
*drive
, void *data
)
1604 drive
->drive_data
= data
;
1607 #define ide_port_for_each_dev(i, dev, port) \
1608 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1610 #define ide_port_for_each_present_dev(i, dev, port) \
1611 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1612 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1614 #define ide_host_for_each_port(i, port, host) \
1615 for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)