include/linux/u64_stats_sync.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef _LINUX_U64_STATS_SYNC_H
   3 #define _LINUX_U64_STATS_SYNC_H
   4
   5 /*
   6  * To properly implement 64bits network statistics on 32bit and 64bit hosts,
   7  * we provide a synchronization point, that is a noop on 64bit or UP kernels.
   8  *
   9  * Key points :
  10  * 1) Use a seqcount on SMP 32bits, with low overhead.
  11  * 2) Whole thing is a noop on 64bit arches or UP kernels.
  12  * 3) Write side must ensure mutual exclusion or one seqcount update could
  13  *    be lost, thus blocking readers forever.
  14  *    If this synchronization point is not a mutex, but a spinlock or
  15  *    spinlock_bh() or disable_bh() :
  16  * 3.1) Write side should not sleep.
  17  * 3.2) Write side should not allow preemption.
  18  * 3.3) If applicable, interrupts should be disabled.
  19  *
  20  * 4) If reader fetches several counters, there is no guarantee the whole values
  21  *    are consistent (remember point 1) : this is a noop on 64bit arches anyway)
  22  *
  23  * 5) readers are allowed to sleep or be preempted/interrupted : They perform
  24  *    pure reads. But if they have to fetch many values, it's better to not allow
  25  *    preemptions/interruptions to avoid many retries.
  26  *
  27  * 6) If counter might be written by an interrupt, readers should block interrupts.
  28  *    (On UP, there is no seqcount_t protection, a reader allowing interrupts could
  29  *     read partial values)
  30  *
  31  * 7) For irq and softirq uses, readers can use u64_stats_fetch_begin_irq() and
  32  *    u64_stats_fetch_retry_irq() helpers
  33  *
  34  * Usage :
  35  *
  36  * Stats producer (writer) should use following template granted it already got
  37  * an exclusive access to counters (a lock is already taken, or per cpu
  38  * data is used [in a non preemptable context])
  39  *
  40  *   spin_lock_bh(...) or other synchronization to get exclusive access
  41  *   ...
  42  *   u64_stats_update_begin(&stats->syncp);
  43  *   stats->bytes64 += len; // non atomic operation
  44  *   stats->packets64++;    // non atomic operation
  45  *   u64_stats_update_end(&stats->syncp);
  46  *
  47  * While a consumer (reader) should use following template to get consistent
  48  * snapshot for each variable (but no guarantee on several ones)
  49  *
  50  * u64 tbytes, tpackets;
  51  * unsigned int start;
  52  *
  53  * do {
  54  *         start = u64_stats_fetch_begin(&stats->syncp);
  55  *         tbytes = stats->bytes64; // non atomic operation
  56  *         tpackets = stats->packets64; // non atomic operation
  57  * } while (u64_stats_fetch_retry(&stats->syncp, start));
  58  *
  59  *
  60  * Example of use in drivers/net/loopback.c, using per_cpu containers,
  61  * in BH disabled context.
  62  */
  63 #include <linux/seqlock.h>
  64
  65 struct u64_stats_sync {
  66 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
  67         seqcount_t      seq;
  68 #endif
  69 };
  70
  71
  72 static inline void u64_stats_init(struct u64_stats_sync *syncp)
  73 {
  74 #if BITS_PER_LONG == 32 && defined(CONFIG_SMP)
  75         seqcount_init(&syncp->seq);
  76 #endif
  77 }
  78
  79 static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
  80 {
  81 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
  82         write_seqcount_begin(&syncp->seq);
  83 #endif
  84 }
  85
  86 static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
  87 {
  88 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
  89         write_seqcount_end(&syncp->seq);
  90 #endif
  91 }
  92
  93 static inline void u64_stats_update_begin_raw(struct u64_stats_sync *syncp)
  94 {
  95 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
  96         raw_write_seqcount_begin(&syncp->seq);
  97 #endif
  98 }
  99
 100 static inline void u64_stats_update_end_raw(struct u64_stats_sync *syncp)
 101 {
 102 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
 103         raw_write_seqcount_end(&syncp->seq);
 104 #endif
 105 }
 106
 107 static inline unsigned int __u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
 108 {
 109 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
 110         return read_seqcount_begin(&syncp->seq);
 111 #else
 112         return 0;
 113 #endif
 114 }
 115
 116 static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
 117 {
 118 #if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
 119         preempt_disable();
 120 #endif
 121         return __u64_stats_fetch_begin(syncp);
 122 }
 123
 124 static inline bool __u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
 125                                          unsigned int start)
 126 {
 127 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
 128         return read_seqcount_retry(&syncp->seq, start);
 129 #else
 130         return false;
 131 #endif
 132 }
 133
 134 static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
 135                                          unsigned int start)
 136 {
 137 #if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
 138         preempt_enable();
 139 #endif
 140         return __u64_stats_fetch_retry(syncp, start);
 141 }
 142
 143 /*
 144  * In case irq handlers can update u64 counters, readers can use following helpers
 145  * - SMP 32bit arches use seqcount protection, irq safe.
 146  * - UP 32bit must disable irqs.
 147  * - 64bit have no problem atomically reading u64 values, irq safe.
 148  */
 149 static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync *syncp)
 150 {
 151 #if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
 152         local_irq_disable();
 153 #endif
 154         return __u64_stats_fetch_begin(syncp);
 155 }
 156
 157 static inline bool u64_stats_fetch_retry_irq(const struct u64_stats_sync *syncp,
 158                                              unsigned int start)
 159 {
 160 #if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
 161         local_irq_enable();
 162 #endif
 163         return __u64_stats_fetch_retry(syncp, start);
 164 }
 165
 166 #endif /* _LINUX_U64_STATS_SYNC_H */