2 * include/media/si476x-core.h -- Common definitions for si476x core
5 * Copyright (C) 2012 Innovative Converged Devices(ICD)
6 * Copyright (C) 2013 Andrey Smirnov
8 * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
24 #include <linux/kfifo.h>
25 #include <linux/atomic.h>
26 #include <linux/i2c.h>
27 #include <linux/regmap.h>
28 #include <linux/mutex.h>
29 #include <linux/mfd/core.h>
30 #include <linux/videodev2.h>
31 #include <linux/regulator/consumer.h>
33 #include <linux/mfd/si476x-platform.h>
34 #include <linux/mfd/si476x-reports.h>
36 /* Command Timeouts */
37 #define SI476X_DEFAULT_TIMEOUT 100000
38 #define SI476X_TIMEOUT_TUNE 700000
39 #define SI476X_TIMEOUT_POWER_UP 330000
40 #define SI476X_STATUS_POLL_US 0
42 /* -------------------- si476x-i2c.c ----------------------- */
44 enum si476x_freq_supported_chips
{
45 SI476X_CHIP_SI4761
= 1,
50 enum si476x_part_revisions
{
51 SI476X_REVISION_A10
= 0,
52 SI476X_REVISION_A20
= 1,
53 SI476X_REVISION_A30
= 2,
56 enum si476x_mfd_cells
{
57 SI476X_RADIO_CELL
= 0,
63 * enum si476x_power_state - possible power state of the si476x
66 * @SI476X_POWER_DOWN: In this state all regulators are turned off
67 * and the reset line is pulled low. The device is completely
69 * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
70 * turned on, reset line pulled high, IRQ line is enabled(polling is
71 * active for polling use scenario) and device is turned on with
72 * POWER_UP command. The device is ready to be used.
73 * @SI476X_POWER_INCONSISTENT: This state indicates that previous
74 * power down was inconsistent, meaning some of the regulators were
75 * not turned down and thus use of the device, without power-cycling
78 enum si476x_power_state
{
79 SI476X_POWER_DOWN
= 0,
80 SI476X_POWER_UP_FULL
= 1,
81 SI476X_POWER_INCONSISTENT
= 2,
85 * struct si476x_core - internal data structure representing the
86 * underlying "core" device which all the MFD cell-devices use.
88 * @client: Actual I2C client used to transfer commands to the chip.
89 * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
90 * @cells: MFD cell devices created by this driver.
91 * @cmd_lock: Mutex used to serialize all the requests to the core
92 * device. This filed should not be used directly. Instead
93 * si476x_core_lock()/si476x_core_unlock() should be used to get
94 * exclusive access to the "core" device.
95 * @users: Active users counter(Used by the radio cell)
96 * @rds_read_queue: Wait queue used to wait for RDS data.
97 * @rds_fifo: FIFO in which all the RDS data received from the chip is
99 * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
100 * @rds_drainer_is_working: Flag used for launching only one instance
101 * of the @rds_fifo_drainer.
102 * @rds_drainer_status_lock: Lock used to guard access to the
103 * @rds_drainer_is_working variable.
104 * @command: Wait queue for wainting on the command comapletion.
105 * @cts: Clear To Send flag set upon receiving first status with CTS
107 * @tuning: Wait queue used for wainting for tune/seek comand
109 * @stc: Similar to @cts, but for the STC bit of the status value.
110 * @power_up_parameters: Parameters used as argument for POWER_UP
111 * command when the device is started.
112 * @state: Current power state of the device.
113 * @supplues: Structure containing handles to all power supplies used
114 * by the device (NULL ones are ignored).
115 * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
116 * @pinmux: Chip's configurable pins configuration.
117 * @diversity_mode: Chips role when functioning in diversity mode.
118 * @status_monitor: Polling worker used in polling use case scenarion
119 * (when IRQ is not avalible).
120 * @revision: Chip's running firmware revision number(Used for correct
121 * command set support).
125 struct i2c_client
*client
;
126 struct regmap
*regmap
;
128 struct mfd_cell cells
[SI476X_MFD_CELLS
];
130 struct mutex cmd_lock
; /* for serializing fm radio operations */
133 wait_queue_head_t rds_read_queue
;
134 struct kfifo rds_fifo
;
135 struct work_struct rds_fifo_drainer
;
136 bool rds_drainer_is_working
;
137 struct mutex rds_drainer_status_lock
;
139 wait_queue_head_t command
;
142 wait_queue_head_t tuning
;
145 struct si476x_power_up_args power_up_parameters
;
147 enum si476x_power_state power_state
;
149 struct regulator_bulk_data supplies
[4];
153 struct si476x_pinmux pinmux
;
154 enum si476x_phase_diversity_mode diversity_mode
;
158 struct delayed_work status_monitor
;
159 #define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
160 struct si476x_core, \
168 static inline struct si476x_core
*i2c_mfd_cell_to_core(struct device
*dev
)
170 struct i2c_client
*client
= to_i2c_client(dev
->parent
);
171 return i2c_get_clientdata(client
);
176 * si476x_core_lock() - lock the core device to get an exclusive access
179 static inline void si476x_core_lock(struct si476x_core
*core
)
181 mutex_lock(&core
->cmd_lock
);
185 * si476x_core_unlock() - unlock the core device to relinquish an
186 * exclusive access to it.
188 static inline void si476x_core_unlock(struct si476x_core
*core
)
190 mutex_unlock(&core
->cmd_lock
);
193 /* *_TUNE_FREQ family of commands accept frequency in multiples of
195 static inline u16
hz_to_si476x(struct si476x_core
*core
, int freq
)
199 switch (core
->power_up_parameters
.func
) {
201 case SI476X_FUNC_FM_RECEIVER
:
202 result
= freq
/ 10000;
204 case SI476X_FUNC_AM_RECEIVER
:
205 result
= freq
/ 1000;
212 static inline int si476x_to_hz(struct si476x_core
*core
, u16 freq
)
216 switch (core
->power_up_parameters
.func
) {
218 case SI476X_FUNC_FM_RECEIVER
:
219 result
= freq
* 10000;
221 case SI476X_FUNC_AM_RECEIVER
:
222 result
= freq
* 1000;
229 /* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
230 * mesures frequency in 62.5 Hz units */
232 static inline int hz_to_v4l2(int freq
)
234 return (freq
* 10) / 625;
237 static inline int v4l2_to_hz(int freq
)
239 return (freq
* 625) / 10;
242 static inline u16
v4l2_to_si476x(struct si476x_core
*core
, int freq
)
244 return hz_to_si476x(core
, v4l2_to_hz(freq
));
247 static inline int si476x_to_v4l2(struct si476x_core
*core
, u16 freq
)
249 return hz_to_v4l2(si476x_to_hz(core
, freq
));
255 * struct si476x_func_info - structure containing result of the
258 * @firmware.major: Firmware major number.
259 * @firmware.minor[...]: Firmware minor numbers.
261 * @func: Mode tuner is working in.
263 struct si476x_func_info
{
268 enum si476x_func func
;
272 * struct si476x_power_down_args - structure used to pass parameters
273 * to POWER_DOWN command
275 * @xosc: true - Power down, but leav oscillator running.
276 * false - Full power down.
278 struct si476x_power_down_args
{
283 * enum si476x_tunemode - enum representing possible tune modes for
285 * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
286 * channel after tune, tune status is valid.
287 * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
288 * channel after tune, tune status invalid.
289 * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
290 * metric thresholds are not met.
291 * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
294 enum si476x_tunemode
{
295 SI476X_TM_VALIDATED_NORMAL_TUNE
= 0,
296 SI476X_TM_INVALIDATED_FAST_TUNE
= 1,
297 SI476X_TM_VALIDATED_AF_TUNE
= 2,
298 SI476X_TM_VALIDATED_AF_CHECK
= 3,
302 * enum si476x_smoothmetrics - enum containing the possible setting fo
303 * audio transitioning of the chip
304 * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
306 * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
307 * channel values to the new values
309 enum si476x_smoothmetrics
{
310 SI476X_SM_INITIALIZE_AUDIO
= 0,
311 SI476X_SM_TRANSITION_AUDIO
= 1,
315 * struct si476x_rds_status_report - the structure representing the
316 * response to 'FM_RD_STATUS' command
317 * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
319 * @rdspiint: Program identification(PI) code has changed.
320 * @rdssyncint: RDS synchronization has changed.
321 * @rdsfifoint: RDS was received and the RDS FIFO has at least
322 * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
323 * @tpptyvalid: TP flag and PTY code are valid falg.
324 * @pivalid: PI code is valid flag.
325 * @rdssync: RDS is currently synchronized.
326 * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
327 * @tp: Current channel's TP flag.
328 * @pty: Current channel's PTY code.
329 * @pi: Current channel's PI code.
330 * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
333 struct si476x_rds_status_report
{
334 bool rdstpptyint
, rdspiint
, rdssyncint
, rdsfifoint
;
335 bool tpptyvalid
, pivalid
, rdssync
, rdsfifolost
;
344 struct v4l2_rds_data rds
[4];
347 struct si476x_rsq_status_args
{
355 enum si476x_injside
{
356 SI476X_INJSIDE_AUTO
= 0,
357 SI476X_INJSIDE_LOW
= 1,
358 SI476X_INJSIDE_HIGH
= 2,
361 struct si476x_tune_freq_args
{
364 enum si476x_injside injside
;
366 enum si476x_tunemode tunemode
;
367 enum si476x_smoothmetrics smoothmetrics
;
371 int si476x_core_stop(struct si476x_core
*, bool);
372 int si476x_core_start(struct si476x_core
*, bool);
373 int si476x_core_set_power_state(struct si476x_core
*, enum si476x_power_state
);
374 bool si476x_core_has_am(struct si476x_core
*);
375 bool si476x_core_has_diversity(struct si476x_core
*);
376 bool si476x_core_is_a_secondary_tuner(struct si476x_core
*);
377 bool si476x_core_is_a_primary_tuner(struct si476x_core
*);
378 bool si476x_core_is_in_am_receiver_mode(struct si476x_core
*core
);
379 bool si476x_core_is_powered_up(struct si476x_core
*core
);
381 enum si476x_i2c_type
{
386 int si476x_core_i2c_xfer(struct si476x_core
*,
387 enum si476x_i2c_type
,
391 /* -------------------- si476x-cmd.c ----------------------- */
393 int si476x_core_cmd_func_info(struct si476x_core
*, struct si476x_func_info
*);
394 int si476x_core_cmd_set_property(struct si476x_core
*, u16
, u16
);
395 int si476x_core_cmd_get_property(struct si476x_core
*, u16
);
396 int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core
*,
397 enum si476x_dclk_config
,
398 enum si476x_dfs_config
,
399 enum si476x_dout_config
,
400 enum si476x_xout_config
);
401 int si476x_core_cmd_zif_pin_cfg(struct si476x_core
*,
402 enum si476x_iqclk_config
,
403 enum si476x_iqfs_config
,
404 enum si476x_iout_config
,
405 enum si476x_qout_config
);
406 int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core
*,
407 enum si476x_icin_config
,
408 enum si476x_icip_config
,
409 enum si476x_icon_config
,
410 enum si476x_icop_config
);
411 int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core
*,
412 enum si476x_lrout_config
);
413 int si476x_core_cmd_intb_pin_cfg(struct si476x_core
*, enum si476x_intb_config
,
414 enum si476x_a1_config
);
415 int si476x_core_cmd_fm_seek_start(struct si476x_core
*, bool, bool);
416 int si476x_core_cmd_am_seek_start(struct si476x_core
*, bool, bool);
417 int si476x_core_cmd_fm_rds_status(struct si476x_core
*, bool, bool, bool,
418 struct si476x_rds_status_report
*);
419 int si476x_core_cmd_fm_rds_blockcount(struct si476x_core
*, bool,
420 struct si476x_rds_blockcount_report
*);
421 int si476x_core_cmd_fm_tune_freq(struct si476x_core
*,
422 struct si476x_tune_freq_args
*);
423 int si476x_core_cmd_am_tune_freq(struct si476x_core
*,
424 struct si476x_tune_freq_args
*);
425 int si476x_core_cmd_am_rsq_status(struct si476x_core
*,
426 struct si476x_rsq_status_args
*,
427 struct si476x_rsq_status_report
*);
428 int si476x_core_cmd_fm_rsq_status(struct si476x_core
*,
429 struct si476x_rsq_status_args
*,
430 struct si476x_rsq_status_report
*);
431 int si476x_core_cmd_power_up(struct si476x_core
*,
432 struct si476x_power_up_args
*);
433 int si476x_core_cmd_power_down(struct si476x_core
*,
434 struct si476x_power_down_args
*);
435 int si476x_core_cmd_fm_phase_div_status(struct si476x_core
*);
436 int si476x_core_cmd_fm_phase_diversity(struct si476x_core
*,
437 enum si476x_phase_diversity_mode
);
439 int si476x_core_cmd_fm_acf_status(struct si476x_core
*,
440 struct si476x_acf_status_report
*);
441 int si476x_core_cmd_am_acf_status(struct si476x_core
*,
442 struct si476x_acf_status_report
*);
443 int si476x_core_cmd_agc_status(struct si476x_core
*,
444 struct si476x_agc_status_report
*);
446 enum si476x_power_grid_type
{
447 SI476X_POWER_GRID_50HZ
= 0,
448 SI476X_POWER_GRID_60HZ
,
453 enum si476x_interrupt_flags
{
454 SI476X_STCIEN
= (1 << 0),
455 SI476X_ACFIEN
= (1 << 1),
456 SI476X_RDSIEN
= (1 << 2),
457 SI476X_RSQIEN
= (1 << 3),
459 SI476X_ERRIEN
= (1 << 6),
460 SI476X_CTSIEN
= (1 << 7),
462 SI476X_STCREP
= (1 << 8),
463 SI476X_ACFREP
= (1 << 9),
464 SI476X_RDSREP
= (1 << 10),
465 SI476X_RSQREP
= (1 << 11),
468 enum si476x_rdsint_sources
{
469 SI476X_RDSTPPTY
= (1 << 4),
470 SI476X_RDSPI
= (1 << 3),
471 SI476X_RDSSYNC
= (1 << 1),
472 SI476X_RDSRECV
= (1 << 0),
475 enum si476x_status_response_bits
{
476 SI476X_CTS
= (1 << 7),
477 SI476X_ERR
= (1 << 6),
478 /* Status response for WB receiver */
479 SI476X_WB_ASQ_INT
= (1 << 4),
480 SI476X_RSQ_INT
= (1 << 3),
481 /* Status response for FM receiver */
482 SI476X_FM_RDS_INT
= (1 << 2),
483 SI476X_ACF_INT
= (1 << 1),
484 SI476X_STC_INT
= (1 << 0),
487 /* -------------------- si476x-prop.c ----------------------- */
489 enum si476x_common_receiver_properties
{
490 SI476X_PROP_INT_CTL_ENABLE
= 0x0000,
491 SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE
= 0x0200,
492 SI476X_PROP_DIGITAL_IO_INPUT_FORMAT
= 0x0201,
493 SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE
= 0x0202,
494 SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT
= 0x0203,
496 SI476X_PROP_SEEK_BAND_BOTTOM
= 0x1100,
497 SI476X_PROP_SEEK_BAND_TOP
= 0x1101,
498 SI476X_PROP_SEEK_FREQUENCY_SPACING
= 0x1102,
500 SI476X_PROP_VALID_MAX_TUNE_ERROR
= 0x2000,
501 SI476X_PROP_VALID_SNR_THRESHOLD
= 0x2003,
502 SI476X_PROP_VALID_RSSI_THRESHOLD
= 0x2004,
505 enum si476x_am_receiver_properties
{
506 SI476X_PROP_AUDIO_PWR_LINE_FILTER
= 0x0303,
509 enum si476x_fm_receiver_properties
{
510 SI476X_PROP_AUDIO_DEEMPHASIS
= 0x0302,
512 SI476X_PROP_FM_RDS_INTERRUPT_SOURCE
= 0x4000,
513 SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT
= 0x4001,
514 SI476X_PROP_FM_RDS_CONFIG
= 0x4002,
517 enum si476x_prop_audio_pwr_line_filter_bits
{
518 SI476X_PROP_PWR_HARMONICS_MASK
= 0x001f,
519 SI476X_PROP_PWR_GRID_MASK
= 0x0100,
520 SI476X_PROP_PWR_ENABLE_MASK
= 0x0200,
521 SI476X_PROP_PWR_GRID_50HZ
= 0x0000,
522 SI476X_PROP_PWR_GRID_60HZ
= 0x0100,
525 enum si476x_prop_fm_rds_config_bits
{
526 SI476X_PROP_RDSEN_MASK
= 0x1,
527 SI476X_PROP_RDSEN
= 0x1,
531 struct regmap
*devm_regmap_init_si476x(struct si476x_core
*);
533 #endif /* SI476X_CORE_H */