arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include "exynos4412-ppmu-common.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20 #include <dt-bindings/clock/maxim,max77686.h>
  21 #include <dt-bindings/pinctrl/samsung.h>
  22
  23 / {
  24         model = "Samsung Trats 2 based on Exynos4412";
  25         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  26
  27         aliases {
  28                 i2c9 = &i2c_ak8975;
  29                 i2c10 = &i2c_cm36651;
  30                 i2c11 = &i2c_max77693;
  31                 i2c12 = &i2c_max77693_fuel;
  32         };
  33
  34         memory@40000000 {
  35                 device_type = "memory";
  36                 reg =  <0x40000000 0x40000000>;
  37         };
  38
  39         chosen {
  40                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  41                 stdout-path = &serial_2;
  42         };
  43
  44         firmware@204f000 {
  45                 compatible = "samsung,secure-firmware";
  46                 reg = <0x0204F000 0x1000>;
  47         };
  48
  49         fixed-rate-clocks {
  50                 xxti {
  51                         compatible = "samsung,clock-xxti", "fixed-clock";
  52                         clock-frequency = <0>;
  53                 };
  54
  55                 xusbxti {
  56                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  57                         clock-frequency = <24000000>;
  58                 };
  59         };
  60
  61         regulators {
  62                 compatible = "simple-bus";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65
  66                 cam_io_reg: voltage-regulator-1 {
  67                         compatible = "regulator-fixed";
  68                         regulator-name = "CAM_SENSOR_A";
  69                         regulator-min-microvolt = <2800000>;
  70                         regulator-max-microvolt = <2800000>;
  71                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  72                         enable-active-high;
  73                 };
  74
  75                 lcd_vdd3_reg: voltage-regulator-2 {
  76                         compatible = "regulator-fixed";
  77                         regulator-name = "LCD_VDD_2.2V";
  78                         regulator-min-microvolt = <2200000>;
  79                         regulator-max-microvolt = <2200000>;
  80                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  81                         enable-active-high;
  82                 };
  83
  84                 cam_af_reg: voltage-regulator-3 {
  85                         compatible = "regulator-fixed";
  86                         regulator-name = "CAM_AF";
  87                         regulator-min-microvolt = <2800000>;
  88                         regulator-max-microvolt = <2800000>;
  89                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  90                         enable-active-high;
  91                 };
  92
  93                 ps_als_reg: voltage-regulator-5 {
  94                         compatible = "regulator-fixed";
  95                         regulator-name = "LED_A_3.0V";
  96                         regulator-min-microvolt = <3000000>;
  97                         regulator-max-microvolt = <3000000>;
  98                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  99                         enable-active-high;
 100                 };
 101
 102                 vsil12: voltage-regulator-6 {
 103                         compatible = "regulator-fixed";
 104                         regulator-name = "VSIL_1.2V";
 105                         regulator-min-microvolt = <1200000>;
 106                         regulator-max-microvolt = <1200000>;
 107                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 108                         enable-active-high;
 109                         vin-supply = <&buck7_reg>;
 110                 };
 111
 112                 vcc33mhl: voltage-regulator-7 {
 113                         compatible = "regulator-fixed";
 114                         regulator-name = "VCC_3.3_MHL";
 115                         regulator-min-microvolt = <3300000>;
 116                         regulator-max-microvolt = <3300000>;
 117                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 118                         enable-active-high;
 119                 };
 120
 121                 vcc18mhl: voltage-regulator-8 {
 122                         compatible = "regulator-fixed";
 123                         regulator-name = "VCC_1.8_MHL";
 124                         regulator-min-microvolt = <1800000>;
 125                         regulator-max-microvolt = <1800000>;
 126                         gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
 127                         enable-active-high;
 128                 };
 129         };
 130
 131         gpio-keys {
 132                 compatible = "gpio-keys";
 133
 134                 key-down {
 135                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 136                         linux,code = <114>;
 137                         label = "volume down";
 138                         debounce-interval = <10>;
 139                 };
 140
 141                 key-up {
 142                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 143                         linux,code = <115>;
 144                         label = "volume up";
 145                         debounce-interval = <10>;
 146                 };
 147
 148                 key-power {
 149                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 150                         linux,code = <116>;
 151                         label = "power";
 152                         debounce-interval = <10>;
 153                         wakeup-source;
 154                 };
 155
 156                 key-ok {
 157                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 158                         linux,code = <139>;
 159                         label = "ok";
 160                         debounce-inteval = <10>;
 161                         wakeup-source;
 162                 };
 163         };
 164
 165         i2c_max77693: i2c-gpio-1 {
 166                 compatible = "i2c-gpio";
 167                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 168                 i2c-gpio,delay-us = <2>;
 169                 #address-cells = <1>;
 170                 #size-cells = <0>;
 171                 status = "okay";
 172
 173                 max77693@66 {
 174                         compatible = "maxim,max77693";
 175                         interrupt-parent = <&gpx1>;
 176                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 177                         reg = <0x66>;
 178
 179                         regulators {
 180                                 esafeout1_reg: ESAFEOUT1 {
 181                                         regulator-name = "ESAFEOUT1";
 182                                 };
 183                                 esafeout2_reg: ESAFEOUT2 {
 184                                         regulator-name = "ESAFEOUT2";
 185                                 };
 186                                 charger_reg: CHARGER {
 187                                         regulator-name = "CHARGER";
 188                                         regulator-min-microamp = <60000>;
 189                                         regulator-max-microamp = <2580000>;
 190                                 };
 191                         };
 192
 193                         max77693_haptic {
 194                                 compatible = "maxim,max77693-haptic";
 195                                 haptic-supply = <&ldo26_reg>;
 196                                 pwms = <&pwm 0 38022 0>;
 197                         };
 198
 199                         charger {
 200                                 compatible = "maxim,max77693-charger";
 201
 202                                 maxim,constant-microvolt = <4350000>;
 203                                 maxim,min-system-microvolt = <3600000>;
 204                                 maxim,thermal-regulation-celsius = <100>;
 205                                 maxim,battery-overcurrent-microamp = <3500000>;
 206                                 maxim,charge-input-threshold-microvolt = <4300000>;
 207                         };
 208                 };
 209         };
 210
 211         i2c_max77693_fuel: i2c-gpio-3 {
 212                 compatible = "i2c-gpio";
 213                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 214                 i2c-gpio,delay-us = <2>;
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217                 status = "okay";
 218
 219                 max77693-fuel-gauge@36 {
 220                         compatible = "maxim,max17047";
 221                         interrupt-parent = <&gpx2>;
 222                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 223                         reg = <0x36>;
 224
 225                         maxim,over-heat-temp = <700>;
 226                         maxim,over-volt = <4500>;
 227                 };
 228         };
 229
 230         i2c_ak8975: i2c-gpio-0 {
 231                 compatible = "i2c-gpio";
 232                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 233                 i2c-gpio,delay-us = <2>;
 234                 #address-cells = <1>;
 235                 #size-cells = <0>;
 236                 status = "okay";
 237
 238                 ak8975@c {
 239                         compatible = "asahi-kasei,ak8975";
 240                         reg = <0x0c>;
 241                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 242                 };
 243         };
 244
 245         i2c_cm36651: i2c-gpio-2 {
 246                 compatible = "i2c-gpio";
 247                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 248                 i2c-gpio,delay-us = <2>;
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251
 252                 cm36651@18 {
 253                         compatible = "capella,cm36651";
 254                         reg = <0x18>;
 255                         interrupt-parent = <&gpx0>;
 256                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 257                         vled-supply = <&ps_als_reg>;
 258                 };
 259         };
 260
 261         i2c-mhl {
 262                 compatible = "i2c-gpio";
 263                 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
 264                 i2c-gpio,delay-us = <100>;
 265                 #address-cells = <1>;
 266                 #size-cells = <0>;
 267
 268                 pinctrl-0 = <&i2c_mhl_bus>;
 269                 pinctrl-names = "default";
 270                 status = "okay";
 271
 272                 sii9234: hdmi-bridge@39 {
 273                         compatible = "sil,sii9234";
 274                         avcc33-supply = <&vcc33mhl>;
 275                         iovcc18-supply = <&vcc18mhl>;
 276                         avcc12-supply = <&vsil12>;
 277                         cvcc12-supply = <&vsil12>;
 278                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 279                         interrupt-parent = <&gpf3>;
 280                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 281                         reg = <0x39>;
 282
 283                         port {
 284                                 mhl_to_hdmi: endpoint {
 285                                         remote-endpoint = <&hdmi_to_mhl>;
 286                                 };
 287                         };
 288                 };
 289         };
 290
 291         camera: camera {
 292                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 293                 pinctrl-names = "default";
 294                 status = "okay";
 295                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 296                                   <&clock CLK_MOUT_CAM1>;
 297                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 298                                          <&clock CLK_XUSBXTI>;
 299
 300
 301         };
 302
 303         wlan_pwrseq: sdhci3-pwrseq {
 304                 compatible = "mmc-pwrseq-simple";
 305                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
 306                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 307                 clock-names = "ext_clock";
 308         };
 309
 310         sound {
 311                 compatible = "samsung,trats2-audio";
 312                 samsung,i2s-controller = <&i2s0>;
 313                 samsung,model = "Trats2";
 314                 samsung,audio-codec = <&wm1811>;
 315                 samsung,audio-routing =
 316                         "SPK", "SPKOUTLN",
 317                         "SPK", "SPKOUTLP",
 318                         "SPK", "SPKOUTRN",
 319                         "SPK", "SPKOUTRP";
 320         };
 321
 322         thermistor-ap {
 323                 compatible = "murata,ncp15wb473";
 324                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 325                 pullup-ohm = <100000>;   /* 100K */
 326                 pulldown-ohm = <100000>; /* 100K */
 327                 io-channels = <&adc 1>;  /* AP temperature */
 328         };
 329
 330         thermistor-battery {
 331                 compatible = "murata,ncp15wb473";
 332                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 333                 pullup-ohm = <100000>;   /* 100K */
 334                 pulldown-ohm = <100000>; /* 100K */
 335                 io-channels = <&adc 2>;  /* Battery temperature */
 336         };
 337
 338         thermal-zones {
 339                 cpu_thermal: cpu-thermal {
 340                         cooling-maps {
 341                                 map0 {
 342                                      /* Corresponds to 800MHz at freq_table */
 343                                      cooling-device = <&cpu0 7 7>;
 344                                 };
 345                                 map1 {
 346                                      /* Corresponds to 200MHz at freq_table */
 347                                      cooling-device = <&cpu0 13 13>;
 348                                };
 349                        };
 350                 };
 351         };
 352 };
 353
 354 &adc {
 355         vdd-supply = <&ldo3_reg>;
 356         status = "okay";
 357 };
 358
 359 &bus_dmc {
 360         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 361         vdd-supply = <&buck1_reg>;
 362         status = "okay";
 363 };
 364
 365 &bus_acp {
 366         devfreq = <&bus_dmc>;
 367         status = "okay";
 368 };
 369
 370 &bus_c2c {
 371         devfreq = <&bus_dmc>;
 372         status = "okay";
 373 };
 374
 375 &bus_leftbus {
 376         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 377         vdd-supply = <&buck3_reg>;
 378         status = "okay";
 379 };
 380
 381 &bus_rightbus {
 382         devfreq = <&bus_leftbus>;
 383         status = "okay";
 384 };
 385
 386 &bus_display {
 387         devfreq = <&bus_leftbus>;
 388         status = "okay";
 389 };
 390
 391 &bus_fsys {
 392         devfreq = <&bus_leftbus>;
 393         status = "okay";
 394 };
 395
 396 &bus_peri {
 397         devfreq = <&bus_leftbus>;
 398         status = "okay";
 399 };
 400
 401 &bus_mfc {
 402         devfreq = <&bus_leftbus>;
 403         status = "okay";
 404 };
 405
 406 &cpu0 {
 407         cpu0-supply = <&buck2_reg>;
 408 };
 409
 410 &csis_0 {
 411         status = "okay";
 412         vddcore-supply = <&ldo8_reg>;
 413         vddio-supply = <&ldo10_reg>;
 414         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 415                         <&clock CLK_SCLK_CSIS0>;
 416         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 417         assigned-clock-rates = <0>, <176000000>;
 418
 419         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 420         port@3 {
 421                 reg = <3>;
 422                 csis0_ep: endpoint {
 423                         remote-endpoint = <&s5c73m3_ep>;
 424                         data-lanes = <1 2 3 4>;
 425                         samsung,csis-hs-settle = <12>;
 426                 };
 427         };
 428 };
 429
 430 &csis_1 {
 431         status = "okay";
 432         vddcore-supply = <&ldo8_reg>;
 433         vddio-supply = <&ldo10_reg>;
 434         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 435                         <&clock CLK_SCLK_CSIS1>;
 436         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 437         assigned-clock-rates = <0>, <176000000>;
 438
 439         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 440         port@4 {
 441                 reg = <4>;
 442                 csis1_ep: endpoint {
 443                         remote-endpoint = <&is_s5k6a3_ep>;
 444                         data-lanes = <1>;
 445                         samsung,csis-hs-settle = <18>;
 446                         samsung,csis-wclk;
 447                 };
 448         };
 449 };
 450
 451 &dsi_0 {
 452         vddcore-supply = <&ldo8_reg>;
 453         vddio-supply = <&ldo10_reg>;
 454         samsung,burst-clock-frequency = <500000000>;
 455         samsung,esc-clock-frequency = <20000000>;
 456         samsung,pll-clock-frequency = <24000000>;
 457         status = "okay";
 458
 459         panel@0 {
 460                 compatible = "samsung,s6e8aa0";
 461                 reg = <0>;
 462                 vdd3-supply = <&lcd_vdd3_reg>;
 463                 vci-supply = <&ldo25_reg>;
 464                 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 465                 power-on-delay= <50>;
 466                 reset-delay = <100>;
 467                 init-delay = <100>;
 468                 flip-horizontal;
 469                 flip-vertical;
 470                 panel-width-mm = <58>;
 471                 panel-height-mm = <103>;
 472
 473                 display-timings {
 474                         timing-0 {
 475                                 clock-frequency = <57153600>;
 476                                 hactive = <720>;
 477                                 vactive = <1280>;
 478                                 hfront-porch = <5>;
 479                                 hback-porch = <5>;
 480                                 hsync-len = <5>;
 481                                 vfront-porch = <13>;
 482                                 vback-porch = <1>;
 483                                 vsync-len = <2>;
 484                         };
 485                 };
 486         };
 487 };
 488
 489 &exynos_usbphy {
 490         vbus-supply = <&esafeout1_reg>;
 491         status = "okay";
 492 };
 493
 494 &fimc_0 {
 495         status = "okay";
 496         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 497                         <&clock CLK_SCLK_FIMC0>;
 498         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 499         assigned-clock-rates = <0>, <176000000>;
 500 };
 501
 502 &fimc_1 {
 503         status = "okay";
 504         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 505                         <&clock CLK_SCLK_FIMC1>;
 506         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 507         assigned-clock-rates = <0>, <176000000>;
 508 };
 509
 510 &fimc_2 {
 511         status = "okay";
 512         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 513                         <&clock CLK_SCLK_FIMC2>;
 514         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 515         assigned-clock-rates = <0>, <176000000>;
 516 };
 517
 518 &fimc_3 {
 519         status = "okay";
 520         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 521                         <&clock CLK_SCLK_FIMC3>;
 522         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 523         assigned-clock-rates = <0>, <176000000>;
 524 };
 525
 526 &fimc_is {
 527         pinctrl-0 = <&fimc_is_uart>;
 528         pinctrl-names = "default";
 529         status = "okay";
 530
 531         i2c1_isp: i2c-isp@12140000 {
 532                 pinctrl-0 = <&fimc_is_i2c1>;
 533                 pinctrl-names = "default";
 534
 535                 s5k6a3@10 {
 536                         compatible = "samsung,s5k6a3";
 537                         reg = <0x10>;
 538                         svdda-supply = <&cam_io_reg>;
 539                         svddio-supply = <&ldo19_reg>;
 540                         afvdd-supply = <&ldo19_reg>;
 541                         clock-frequency = <24000000>;
 542                         /* CAM_B_CLKOUT */
 543                         clocks = <&camera 1>;
 544                         clock-names = "extclk";
 545                         samsung,camclk-out = <1>;
 546                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 547
 548                         port {
 549                                 is_s5k6a3_ep: endpoint {
 550                                         remote-endpoint = <&csis1_ep>;
 551                                         data-lanes = <1>;
 552                                 };
 553                         };
 554                 };
 555         };
 556 };
 557
 558 &fimc_lite_0 {
 559         status = "okay";
 560 };
 561
 562 &fimc_lite_1 {
 563         status = "okay";
 564 };
 565
 566 &fimd {
 567         status = "okay";
 568 };
 569
 570 &hdmi {
 571         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 572         pinctrl-names = "default";
 573         pinctrl-0 = <&hdmi_hpd>;
 574         vdd-supply = <&ldo3_reg>;
 575         vdd_osc-supply = <&ldo4_reg>;
 576         vdd_pll-supply = <&ldo3_reg>;
 577         ddc = <&i2c_5>;
 578         status = "okay";
 579
 580         ports {
 581                 #address-cells = <1>;
 582                 #size-cells = <0>;
 583
 584                 port@1 {
 585                         reg = <1>;
 586                         hdmi_to_mhl: endpoint {
 587                                 remote-endpoint = <&mhl_to_hdmi>;
 588                         };
 589                 };
 590         };
 591 };
 592
 593 &hsotg {
 594         vusb_d-supply = <&ldo15_reg>;
 595         vusb_a-supply = <&ldo12_reg>;
 596         dr_mode = "peripheral";
 597         status = "okay";
 598 };
 599
 600 &i2c_0 {
 601         samsung,i2c-sda-delay = <100>;
 602         samsung,i2c-slave-addr = <0x10>;
 603         samsung,i2c-max-bus-freq = <400000>;
 604         pinctrl-0 = <&i2c0_bus>;
 605         pinctrl-names = "default";
 606         status = "okay";
 607
 608         s5c73m3@3c {
 609                 compatible = "samsung,s5c73m3";
 610                 reg = <0x3c>;
 611                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 612                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 613                 vdd-int-supply = <&buck9_reg>;
 614                 vddio-cis-supply = <&ldo9_reg>;
 615                 vdda-supply = <&ldo17_reg>;
 616                 vddio-host-supply = <&ldo18_reg>;
 617                 vdd-af-supply = <&cam_af_reg>;
 618                 vdd-reg-supply = <&cam_io_reg>;
 619                 clock-frequency = <24000000>;
 620                 /* CAM_A_CLKOUT */
 621                 clocks = <&camera 0>;
 622                 clock-names = "cis_extclk";
 623                 port {
 624                         s5c73m3_ep: endpoint {
 625                                 remote-endpoint = <&csis0_ep>;
 626                                 data-lanes = <1 2 3 4>;
 627                         };
 628                 };
 629         };
 630 };
 631
 632 &i2c_3 {
 633         samsung,i2c-sda-delay = <100>;
 634         samsung,i2c-slave-addr = <0x10>;
 635         samsung,i2c-max-bus-freq = <400000>;
 636         pinctrl-0 = <&i2c3_bus>;
 637         pinctrl-names = "default";
 638         status = "okay";
 639
 640         mms114-touchscreen@48 {
 641                 compatible = "melfas,mms114";
 642                 reg = <0x48>;
 643                 interrupt-parent = <&gpm2>;
 644                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 645                 x-size = <720>;
 646                 y-size = <1280>;
 647                 avdd-supply = <&ldo23_reg>;
 648                 vdd-supply = <&ldo24_reg>;
 649         };
 650 };
 651
 652 &i2c_4 {
 653         samsung,i2c-sda-delay = <100>;
 654         samsung,i2c-slave-addr = <0x10>;
 655         samsung,i2c-max-bus-freq = <100000>;
 656         pinctrl-0 = <&i2c4_bus>;
 657         pinctrl-names = "default";
 658         status = "okay";
 659
 660         wm1811: wm1811@1a {
 661                 compatible = "wlf,wm1811";
 662                 reg = <0x1a>;
 663                 clocks = <&pmu_system_controller 0>;
 664                 clock-names = "MCLK1";
 665                 DCVDD-supply = <&ldo3_reg>;
 666                 DBVDD1-supply = <&ldo3_reg>;
 667                 wlf,ldo1ena = <&gpj0 4 0>;
 668         };
 669 };
 670
 671 &i2c_5 {
 672         status = "okay";
 673 };
 674
 675 &i2c_7 {
 676         samsung,i2c-sda-delay = <100>;
 677         samsung,i2c-slave-addr = <0x10>;
 678         samsung,i2c-max-bus-freq = <100000>;
 679         pinctrl-0 = <&i2c7_bus>;
 680         pinctrl-names = "default";
 681         status = "okay";
 682
 683         max77686: max77686_pmic@9 {
 684                 compatible = "maxim,max77686";
 685                 interrupt-parent = <&gpx0>;
 686                 interrupts = <7 IRQ_TYPE_NONE>;
 687                 reg = <0x09>;
 688                 #clock-cells = <1>;
 689
 690                 voltage-regulators {
 691                         ldo1_reg: LDO1 {
 692                                 regulator-name = "VALIVE_1.0V_AP";
 693                                 regulator-min-microvolt = <1000000>;
 694                                 regulator-max-microvolt = <1000000>;
 695                                 regulator-always-on;
 696                         };
 697
 698                         ldo2_reg: LDO2 {
 699                                 regulator-name = "VM1M2_1.2V_AP";
 700                                 regulator-min-microvolt = <1200000>;
 701                                 regulator-max-microvolt = <1200000>;
 702                                 regulator-always-on;
 703                                 regulator-state-mem {
 704                                         regulator-on-in-suspend;
 705                                 };
 706                         };
 707
 708                         ldo3_reg: LDO3 {
 709                                 regulator-name = "VCC_1.8V_AP";
 710                                 regulator-min-microvolt = <1800000>;
 711                                 regulator-max-microvolt = <1800000>;
 712                                 regulator-always-on;
 713                         };
 714
 715                         ldo4_reg: LDO4 {
 716                                 regulator-name = "VCC_2.8V_AP";
 717                                 regulator-min-microvolt = <2800000>;
 718                                 regulator-max-microvolt = <2800000>;
 719                                 regulator-always-on;
 720                         };
 721
 722                         ldo5_reg: LDO5 {
 723                                 regulator-name = "VCC_1.8V_IO";
 724                                 regulator-min-microvolt = <1800000>;
 725                                 regulator-max-microvolt = <1800000>;
 726                                 regulator-always-on;
 727                         };
 728
 729                         ldo6_reg: LDO6 {
 730                                 regulator-name = "VMPLL_1.0V_AP";
 731                                 regulator-min-microvolt = <1000000>;
 732                                 regulator-max-microvolt = <1000000>;
 733                                 regulator-always-on;
 734                                 regulator-state-mem {
 735                                         regulator-on-in-suspend;
 736                                 };
 737                         };
 738
 739                         ldo7_reg: LDO7 {
 740                                 regulator-name = "VPLL_1.0V_AP";
 741                                 regulator-min-microvolt = <1000000>;
 742                                 regulator-max-microvolt = <1000000>;
 743                                 regulator-always-on;
 744                                 regulator-state-mem {
 745                                         regulator-on-in-suspend;
 746                                 };
 747                         };
 748
 749                         ldo8_reg: LDO8 {
 750                                 regulator-name = "VMIPI_1.0V";
 751                                 regulator-min-microvolt = <1000000>;
 752                                 regulator-max-microvolt = <1000000>;
 753                                 regulator-state-mem {
 754                                         regulator-off-in-suspend;
 755                                 };
 756                         };
 757
 758                         ldo9_reg: LDO9 {
 759                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 760                                 regulator-min-microvolt = <1200000>;
 761                                 regulator-max-microvolt = <1200000>;
 762                         };
 763
 764                         ldo10_reg: LDO10 {
 765                                 regulator-name = "VMIPI_1.8V";
 766                                 regulator-min-microvolt = <1800000>;
 767                                 regulator-max-microvolt = <1800000>;
 768                                 regulator-state-mem {
 769                                         regulator-off-in-suspend;
 770                                 };
 771                         };
 772
 773                         ldo11_reg: LDO11 {
 774                                 regulator-name = "VABB1_1.95V";
 775                                 regulator-min-microvolt = <1950000>;
 776                                 regulator-max-microvolt = <1950000>;
 777                                 regulator-always-on;
 778                                 regulator-state-mem {
 779                                         regulator-off-in-suspend;
 780                                 };
 781                         };
 782
 783                         ldo12_reg: LDO12 {
 784                                 regulator-name = "VUOTG_3.0V";
 785                                 regulator-min-microvolt = <3000000>;
 786                                 regulator-max-microvolt = <3000000>;
 787                                 regulator-state-mem {
 788                                         regulator-off-in-suspend;
 789                                 };
 790                         };
 791
 792                         ldo13_reg: LDO13 {
 793                                 regulator-name = "NFC_AVDD_1.8V";
 794                                 regulator-min-microvolt = <1800000>;
 795                                 regulator-max-microvolt = <1800000>;
 796                         };
 797
 798                         ldo14_reg: LDO14 {
 799                                 regulator-name = "VABB2_1.95V";
 800                                 regulator-min-microvolt = <1950000>;
 801                                 regulator-max-microvolt = <1950000>;
 802                                 regulator-always-on;
 803                                 regulator-state-mem {
 804                                         regulator-off-in-suspend;
 805                                 };
 806                         };
 807
 808                         ldo15_reg: LDO15 {
 809                                 regulator-name = "VHSIC_1.0V";
 810                                 regulator-min-microvolt = <1000000>;
 811                                 regulator-max-microvolt = <1000000>;
 812                                 regulator-state-mem {
 813                                         regulator-on-in-suspend;
 814                                 };
 815                         };
 816
 817                         ldo16_reg: LDO16 {
 818                                 regulator-name = "VHSIC_1.8V";
 819                                 regulator-min-microvolt = <1800000>;
 820                                 regulator-max-microvolt = <1800000>;
 821                                 regulator-state-mem {
 822                                         regulator-on-in-suspend;
 823                                 };
 824                         };
 825
 826                         ldo17_reg: LDO17 {
 827                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 828                                 regulator-min-microvolt = <1200000>;
 829                                 regulator-max-microvolt = <1200000>;
 830                         };
 831
 832                         ldo18_reg: LDO18 {
 833                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 834                                 regulator-min-microvolt = <1800000>;
 835                                 regulator-max-microvolt = <1800000>;
 836                         };
 837
 838                         ldo19_reg: LDO19 {
 839                                 regulator-name = "VT_CAM_1.8V";
 840                                 regulator-min-microvolt = <1800000>;
 841                                 regulator-max-microvolt = <1800000>;
 842                         };
 843
 844                         ldo20_reg: LDO20 {
 845                                 regulator-name = "VDDQ_PRE_1.8V";
 846                                 regulator-min-microvolt = <1800000>;
 847                                 regulator-max-microvolt = <1800000>;
 848                         };
 849
 850                         ldo21_reg: LDO21 {
 851                                 regulator-name = "VTF_2.8V";
 852                                 regulator-min-microvolt = <2800000>;
 853                                 regulator-max-microvolt = <2800000>;
 854                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 855                         };
 856
 857                         ldo22_reg: LDO22 {
 858                                 regulator-name = "VMEM_VDD_2.8V";
 859                                 regulator-min-microvolt = <2800000>;
 860                                 regulator-max-microvolt = <2800000>;
 861                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 862                         };
 863
 864                         ldo23_reg: LDO23 {
 865                                 regulator-name = "TSP_AVDD_3.3V";
 866                                 regulator-min-microvolt = <3300000>;
 867                                 regulator-max-microvolt = <3300000>;
 868                         };
 869
 870                         ldo24_reg: LDO24 {
 871                                 regulator-name = "TSP_VDD_1.8V";
 872                                 regulator-min-microvolt = <1800000>;
 873                                 regulator-max-microvolt = <1800000>;
 874                         };
 875
 876                         ldo25_reg: LDO25 {
 877                                 regulator-name = "LCD_VCC_3.3V";
 878                                 regulator-min-microvolt = <2800000>;
 879                                 regulator-max-microvolt = <2800000>;
 880                         };
 881
 882                         ldo26_reg: LDO26 {
 883                                 regulator-name = "MOTOR_VCC_3.0V";
 884                                 regulator-min-microvolt = <3000000>;
 885                                 regulator-max-microvolt = <3000000>;
 886                         };
 887
 888                         buck1_reg: BUCK1 {
 889                                 regulator-name = "vdd_mif";
 890                                 regulator-min-microvolt = <850000>;
 891                                 regulator-max-microvolt = <1100000>;
 892                                 regulator-always-on;
 893                                 regulator-boot-on;
 894                                 regulator-state-mem {
 895                                         regulator-off-in-suspend;
 896                                 };
 897                         };
 898
 899                         buck2_reg: BUCK2 {
 900                                 regulator-name = "vdd_arm";
 901                                 regulator-min-microvolt = <850000>;
 902                                 regulator-max-microvolt = <1500000>;
 903                                 regulator-always-on;
 904                                 regulator-boot-on;
 905                                 regulator-state-mem {
 906                                         regulator-on-in-suspend;
 907                                 };
 908                         };
 909
 910                         buck3_reg: BUCK3 {
 911                                 regulator-name = "vdd_int";
 912                                 regulator-min-microvolt = <850000>;
 913                                 regulator-max-microvolt = <1150000>;
 914                                 regulator-always-on;
 915                                 regulator-boot-on;
 916                                 regulator-state-mem {
 917                                         regulator-off-in-suspend;
 918                                 };
 919                         };
 920
 921                         buck4_reg: BUCK4 {
 922                                 regulator-name = "vdd_g3d";
 923                                 regulator-min-microvolt = <850000>;
 924                                 regulator-max-microvolt = <1150000>;
 925                                 regulator-boot-on;
 926                                 regulator-state-mem {
 927                                         regulator-off-in-suspend;
 928                                 };
 929                         };
 930
 931                         buck5_reg: BUCK5 {
 932                                 regulator-name = "VMEM_1.2V_AP";
 933                                 regulator-min-microvolt = <1200000>;
 934                                 regulator-max-microvolt = <1200000>;
 935                                 regulator-always-on;
 936                         };
 937
 938                         buck6_reg: BUCK6 {
 939                                 regulator-name = "VCC_SUB_1.35V";
 940                                 regulator-min-microvolt = <1350000>;
 941                                 regulator-max-microvolt = <1350000>;
 942                                 regulator-always-on;
 943                         };
 944
 945                         buck7_reg: BUCK7 {
 946                                 regulator-name = "VCC_SUB_2.0V";
 947                                 regulator-min-microvolt = <2000000>;
 948                                 regulator-max-microvolt = <2000000>;
 949                                 regulator-always-on;
 950                         };
 951
 952                         buck8_reg: BUCK8 {
 953                                 regulator-name = "VMEM_VDDF_3.0V";
 954                                 regulator-min-microvolt = <2850000>;
 955                                 regulator-max-microvolt = <2850000>;
 956                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 957                         };
 958
 959                         buck9_reg: BUCK9 {
 960                                 regulator-name = "CAM_ISP_CORE_1.2V";
 961                                 regulator-min-microvolt = <1000000>;
 962                                 regulator-max-microvolt = <1200000>;
 963                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 964                         };
 965                 };
 966         };
 967 };
 968
 969 &i2c_8 {
 970         status = "okay";
 971 };
 972
 973 &i2s0 {
 974         pinctrl-0 = <&i2s0_bus>;
 975         pinctrl-names = "default";
 976         status = "okay";
 977 };
 978
 979 &mixer {
 980         status = "okay";
 981 };
 982
 983 &mshc_0 {
 984         broken-cd;
 985         non-removable;
 986         card-detect-delay = <200>;
 987         vmmc-supply = <&ldo22_reg>;
 988         clock-frequency = <400000000>;
 989         samsung,dw-mshc-ciu-div = <0>;
 990         samsung,dw-mshc-sdr-timing = <2 3>;
 991         samsung,dw-mshc-ddr-timing = <1 2>;
 992         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 993         pinctrl-names = "default";
 994         status = "okay";
 995         bus-width = <8>;
 996         cap-mmc-highspeed;
 997 };
 998
 999 &pmu_system_controller {
1000         assigned-clocks = <&pmu_system_controller 0>;
1001         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
1002 };
1003
1004 &pinctrl_0 {
1005         pinctrl-names = "default";
1006         pinctrl-0 = <&sleep0>;
1007
1008         mhl_int: mhl-int {
1009                 samsung,pins = "gpf3-5";
1010                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1011         };
1012
1013         i2c_mhl_bus: i2c-mhl-bus {
1014                 samsung,pins = "gpf0-4", "gpf0-6";
1015                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
1016                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1017                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1018         };
1019
1020         sleep0: sleep-states {
1021                 PIN_SLP(gpa0-0, INPUT, NONE);
1022                 PIN_SLP(gpa0-1, OUT0, NONE);
1023                 PIN_SLP(gpa0-2, INPUT, NONE);
1024                 PIN_SLP(gpa0-3, INPUT, UP);
1025                 PIN_SLP(gpa0-4, INPUT, NONE);
1026                 PIN_SLP(gpa0-5, INPUT, DOWN);
1027                 PIN_SLP(gpa0-6, INPUT, DOWN);
1028                 PIN_SLP(gpa0-7, INPUT, UP);
1029
1030                 PIN_SLP(gpa1-0, INPUT, DOWN);
1031                 PIN_SLP(gpa1-1, INPUT, DOWN);
1032                 PIN_SLP(gpa1-2, INPUT, DOWN);
1033                 PIN_SLP(gpa1-3, INPUT, DOWN);
1034                 PIN_SLP(gpa1-4, INPUT, DOWN);
1035                 PIN_SLP(gpa1-5, INPUT, DOWN);
1036
1037                 PIN_SLP(gpb-0, INPUT, NONE);
1038                 PIN_SLP(gpb-1, INPUT, NONE);
1039                 PIN_SLP(gpb-2, INPUT, NONE);
1040                 PIN_SLP(gpb-3, INPUT, NONE);
1041                 PIN_SLP(gpb-4, INPUT, DOWN);
1042                 PIN_SLP(gpb-5, INPUT, UP);
1043                 PIN_SLP(gpb-6, INPUT, DOWN);
1044                 PIN_SLP(gpb-7, INPUT, DOWN);
1045
1046                 PIN_SLP(gpc0-0, INPUT, DOWN);
1047                 PIN_SLP(gpc0-1, INPUT, DOWN);
1048                 PIN_SLP(gpc0-2, INPUT, DOWN);
1049                 PIN_SLP(gpc0-3, INPUT, DOWN);
1050                 PIN_SLP(gpc0-4, INPUT, DOWN);
1051
1052                 PIN_SLP(gpc1-0, INPUT, NONE);
1053                 PIN_SLP(gpc1-1, PREV, NONE);
1054                 PIN_SLP(gpc1-2, INPUT, NONE);
1055                 PIN_SLP(gpc1-3, INPUT, NONE);
1056                 PIN_SLP(gpc1-4, INPUT, NONE);
1057
1058                 PIN_SLP(gpd0-0, INPUT, DOWN);
1059                 PIN_SLP(gpd0-1, INPUT, DOWN);
1060                 PIN_SLP(gpd0-2, INPUT, NONE);
1061                 PIN_SLP(gpd0-3, INPUT, NONE);
1062
1063                 PIN_SLP(gpd1-0, INPUT, DOWN);
1064                 PIN_SLP(gpd1-1, INPUT, DOWN);
1065                 PIN_SLP(gpd1-2, INPUT, NONE);
1066                 PIN_SLP(gpd1-3, INPUT, NONE);
1067
1068                 PIN_SLP(gpf0-0, INPUT, NONE);
1069                 PIN_SLP(gpf0-1, INPUT, NONE);
1070                 PIN_SLP(gpf0-2, INPUT, DOWN);
1071                 PIN_SLP(gpf0-3, INPUT, DOWN);
1072                 PIN_SLP(gpf0-4, INPUT, NONE);
1073                 PIN_SLP(gpf0-5, INPUT, DOWN);
1074                 PIN_SLP(gpf0-6, INPUT, NONE);
1075                 PIN_SLP(gpf0-7, INPUT, DOWN);
1076
1077                 PIN_SLP(gpf1-0, INPUT, DOWN);
1078                 PIN_SLP(gpf1-1, INPUT, DOWN);
1079                 PIN_SLP(gpf1-2, INPUT, DOWN);
1080                 PIN_SLP(gpf1-3, INPUT, DOWN);
1081                 PIN_SLP(gpf1-4, INPUT, NONE);
1082                 PIN_SLP(gpf1-5, INPUT, NONE);
1083                 PIN_SLP(gpf1-6, INPUT, DOWN);
1084                 PIN_SLP(gpf1-7, PREV, NONE);
1085
1086                 PIN_SLP(gpf2-0, PREV, NONE);
1087                 PIN_SLP(gpf2-1, INPUT, DOWN);
1088                 PIN_SLP(gpf2-2, INPUT, DOWN);
1089                 PIN_SLP(gpf2-3, INPUT, DOWN);
1090                 PIN_SLP(gpf2-4, INPUT, DOWN);
1091                 PIN_SLP(gpf2-5, INPUT, DOWN);
1092                 PIN_SLP(gpf2-6, INPUT, NONE);
1093                 PIN_SLP(gpf2-7, INPUT, NONE);
1094
1095                 PIN_SLP(gpf3-0, INPUT, NONE);
1096                 PIN_SLP(gpf3-1, PREV, NONE);
1097                 PIN_SLP(gpf3-2, PREV, NONE);
1098                 PIN_SLP(gpf3-3, PREV, NONE);
1099                 PIN_SLP(gpf3-4, OUT1, NONE);
1100                 PIN_SLP(gpf3-5, INPUT, DOWN);
1101
1102                 PIN_SLP(gpj0-0, PREV, NONE);
1103                 PIN_SLP(gpj0-1, PREV, NONE);
1104                 PIN_SLP(gpj0-2, PREV, NONE);
1105                 PIN_SLP(gpj0-3, INPUT, DOWN);
1106                 PIN_SLP(gpj0-4, PREV, NONE);
1107                 PIN_SLP(gpj0-5, PREV, NONE);
1108                 PIN_SLP(gpj0-6, INPUT, DOWN);
1109                 PIN_SLP(gpj0-7, INPUT, DOWN);
1110
1111                 PIN_SLP(gpj1-0, INPUT, DOWN);
1112                 PIN_SLP(gpj1-1, PREV, NONE);
1113                 PIN_SLP(gpj1-2, PREV, NONE);
1114                 PIN_SLP(gpj1-3, INPUT, DOWN);
1115                 PIN_SLP(gpj1-4, INPUT, DOWN);
1116         };
1117 };
1118
1119 &pinctrl_1 {
1120         pinctrl-names = "default";
1121         pinctrl-0 = <&sleep1>;
1122
1123         hdmi_hpd: hdmi-hpd {
1124                 samsung,pins = "gpx3-7";
1125                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1126         };
1127
1128         sleep1: sleep-states {
1129                 PIN_SLP(gpk0-0, PREV, NONE);
1130                 PIN_SLP(gpk0-1, PREV, NONE);
1131                 PIN_SLP(gpk0-2, OUT0, NONE);
1132                 PIN_SLP(gpk0-3, PREV, NONE);
1133                 PIN_SLP(gpk0-4, PREV, NONE);
1134                 PIN_SLP(gpk0-5, PREV, NONE);
1135                 PIN_SLP(gpk0-6, PREV, NONE);
1136
1137                 PIN_SLP(gpk1-0, INPUT, DOWN);
1138                 PIN_SLP(gpk1-1, INPUT, DOWN);
1139                 PIN_SLP(gpk1-2, INPUT, DOWN);
1140                 PIN_SLP(gpk1-3, PREV, NONE);
1141                 PIN_SLP(gpk1-4, PREV, NONE);
1142                 PIN_SLP(gpk1-5, PREV, NONE);
1143                 PIN_SLP(gpk1-6, PREV, NONE);
1144
1145                 PIN_SLP(gpk2-0, INPUT, DOWN);
1146                 PIN_SLP(gpk2-1, INPUT, DOWN);
1147                 PIN_SLP(gpk2-2, INPUT, DOWN);
1148                 PIN_SLP(gpk2-3, INPUT, DOWN);
1149                 PIN_SLP(gpk2-4, INPUT, DOWN);
1150                 PIN_SLP(gpk2-5, INPUT, DOWN);
1151                 PIN_SLP(gpk2-6, INPUT, DOWN);
1152
1153                 PIN_SLP(gpk3-0, OUT0, NONE);
1154                 PIN_SLP(gpk3-1, INPUT, NONE);
1155                 PIN_SLP(gpk3-2, INPUT, DOWN);
1156                 PIN_SLP(gpk3-3, INPUT, NONE);
1157                 PIN_SLP(gpk3-4, INPUT, NONE);
1158                 PIN_SLP(gpk3-5, INPUT, NONE);
1159                 PIN_SLP(gpk3-6, INPUT, NONE);
1160
1161                 PIN_SLP(gpl0-0, INPUT, DOWN);
1162                 PIN_SLP(gpl0-1, INPUT, DOWN);
1163                 PIN_SLP(gpl0-2, INPUT, DOWN);
1164                 PIN_SLP(gpl0-3, INPUT, DOWN);
1165                 PIN_SLP(gpl0-4, PREV, NONE);
1166                 PIN_SLP(gpl0-6, PREV, NONE);
1167
1168                 PIN_SLP(gpl1-0, INPUT, DOWN);
1169                 PIN_SLP(gpl1-1, INPUT, DOWN);
1170                 PIN_SLP(gpl2-0, INPUT, DOWN);
1171                 PIN_SLP(gpl2-1, INPUT, DOWN);
1172                 PIN_SLP(gpl2-2, INPUT, DOWN);
1173                 PIN_SLP(gpl2-3, INPUT, DOWN);
1174                 PIN_SLP(gpl2-4, INPUT, DOWN);
1175                 PIN_SLP(gpl2-5, INPUT, DOWN);
1176                 PIN_SLP(gpl2-6, PREV, NONE);
1177                 PIN_SLP(gpl2-7, INPUT, DOWN);
1178
1179                 PIN_SLP(gpm0-0, INPUT, DOWN);
1180                 PIN_SLP(gpm0-1, INPUT, DOWN);
1181                 PIN_SLP(gpm0-2, INPUT, DOWN);
1182                 PIN_SLP(gpm0-3, INPUT, DOWN);
1183                 PIN_SLP(gpm0-4, INPUT, DOWN);
1184                 PIN_SLP(gpm0-5, INPUT, DOWN);
1185                 PIN_SLP(gpm0-6, INPUT, DOWN);
1186                 PIN_SLP(gpm0-7, INPUT, DOWN);
1187
1188                 PIN_SLP(gpm1-0, INPUT, DOWN);
1189                 PIN_SLP(gpm1-1, INPUT, DOWN);
1190                 PIN_SLP(gpm1-2, INPUT, NONE);
1191                 PIN_SLP(gpm1-3, INPUT, NONE);
1192                 PIN_SLP(gpm1-4, INPUT, NONE);
1193                 PIN_SLP(gpm1-5, INPUT, NONE);
1194                 PIN_SLP(gpm1-6, INPUT, DOWN);
1195
1196                 PIN_SLP(gpm2-0, INPUT, NONE);
1197                 PIN_SLP(gpm2-1, INPUT, NONE);
1198                 PIN_SLP(gpm2-2, INPUT, DOWN);
1199                 PIN_SLP(gpm2-3, INPUT, DOWN);
1200                 PIN_SLP(gpm2-4, INPUT, DOWN);
1201
1202                 PIN_SLP(gpm3-0, PREV, NONE);
1203                 PIN_SLP(gpm3-1, PREV, NONE);
1204                 PIN_SLP(gpm3-2, PREV, NONE);
1205                 PIN_SLP(gpm3-3, OUT1, NONE);
1206                 PIN_SLP(gpm3-4, INPUT, DOWN);
1207                 PIN_SLP(gpm3-5, INPUT, DOWN);
1208                 PIN_SLP(gpm3-6, INPUT, DOWN);
1209                 PIN_SLP(gpm3-7, INPUT, DOWN);
1210
1211                 PIN_SLP(gpm4-0, INPUT, DOWN);
1212                 PIN_SLP(gpm4-1, INPUT, DOWN);
1213                 PIN_SLP(gpm4-2, INPUT, DOWN);
1214                 PIN_SLP(gpm4-3, INPUT, DOWN);
1215                 PIN_SLP(gpm4-4, INPUT, DOWN);
1216                 PIN_SLP(gpm4-5, INPUT, DOWN);
1217                 PIN_SLP(gpm4-6, INPUT, DOWN);
1218                 PIN_SLP(gpm4-7, INPUT, DOWN);
1219
1220                 PIN_SLP(gpy0-0, INPUT, DOWN);
1221                 PIN_SLP(gpy0-1, INPUT, DOWN);
1222                 PIN_SLP(gpy0-2, INPUT, DOWN);
1223                 PIN_SLP(gpy0-3, INPUT, DOWN);
1224                 PIN_SLP(gpy0-4, INPUT, DOWN);
1225                 PIN_SLP(gpy0-5, INPUT, DOWN);
1226
1227                 PIN_SLP(gpy1-0, INPUT, DOWN);
1228                 PIN_SLP(gpy1-1, INPUT, DOWN);
1229                 PIN_SLP(gpy1-2, INPUT, DOWN);
1230                 PIN_SLP(gpy1-3, INPUT, DOWN);
1231
1232                 PIN_SLP(gpy2-0, PREV, NONE);
1233                 PIN_SLP(gpy2-1, INPUT, DOWN);
1234                 PIN_SLP(gpy2-2, INPUT, NONE);
1235                 PIN_SLP(gpy2-3, INPUT, NONE);
1236                 PIN_SLP(gpy2-4, INPUT, NONE);
1237                 PIN_SLP(gpy2-5, INPUT, NONE);
1238
1239                 PIN_SLP(gpy3-0, INPUT, DOWN);
1240                 PIN_SLP(gpy3-1, INPUT, DOWN);
1241                 PIN_SLP(gpy3-2, INPUT, DOWN);
1242                 PIN_SLP(gpy3-3, INPUT, DOWN);
1243                 PIN_SLP(gpy3-4, INPUT, DOWN);
1244                 PIN_SLP(gpy3-5, INPUT, DOWN);
1245                 PIN_SLP(gpy3-6, INPUT, DOWN);
1246                 PIN_SLP(gpy3-7, INPUT, DOWN);
1247
1248                 PIN_SLP(gpy4-0, INPUT, DOWN);
1249                 PIN_SLP(gpy4-1, INPUT, DOWN);
1250                 PIN_SLP(gpy4-2, INPUT, DOWN);
1251                 PIN_SLP(gpy4-3, INPUT, DOWN);
1252                 PIN_SLP(gpy4-4, INPUT, DOWN);
1253                 PIN_SLP(gpy4-5, INPUT, DOWN);
1254                 PIN_SLP(gpy4-6, INPUT, DOWN);
1255                 PIN_SLP(gpy4-7, INPUT, DOWN);
1256
1257                 PIN_SLP(gpy5-0, INPUT, DOWN);
1258                 PIN_SLP(gpy5-1, INPUT, DOWN);
1259                 PIN_SLP(gpy5-2, INPUT, DOWN);
1260                 PIN_SLP(gpy5-3, INPUT, DOWN);
1261                 PIN_SLP(gpy5-4, INPUT, DOWN);
1262                 PIN_SLP(gpy5-5, INPUT, DOWN);
1263                 PIN_SLP(gpy5-6, INPUT, DOWN);
1264                 PIN_SLP(gpy5-7, INPUT, DOWN);
1265
1266                 PIN_SLP(gpy6-0, INPUT, DOWN);
1267                 PIN_SLP(gpy6-1, INPUT, DOWN);
1268                 PIN_SLP(gpy6-2, INPUT, DOWN);
1269                 PIN_SLP(gpy6-3, INPUT, DOWN);
1270                 PIN_SLP(gpy6-4, INPUT, DOWN);
1271                 PIN_SLP(gpy6-5, INPUT, DOWN);
1272                 PIN_SLP(gpy6-6, INPUT, DOWN);
1273                 PIN_SLP(gpy6-7, INPUT, DOWN);
1274         };
1275 };
1276
1277 &pinctrl_2 {
1278         pinctrl-names = "default";
1279         pinctrl-0 = <&sleep2>;
1280
1281         sleep2: sleep-states {
1282                 PIN_SLP(gpz-0, INPUT, DOWN);
1283                 PIN_SLP(gpz-1, INPUT, DOWN);
1284                 PIN_SLP(gpz-2, INPUT, DOWN);
1285                 PIN_SLP(gpz-3, INPUT, DOWN);
1286                 PIN_SLP(gpz-4, INPUT, DOWN);
1287                 PIN_SLP(gpz-5, INPUT, DOWN);
1288                 PIN_SLP(gpz-6, INPUT, DOWN);
1289         };
1290 };
1291
1292 &pinctrl_3 {
1293         pinctrl-names = "default";
1294         pinctrl-0 = <&sleep3>;
1295
1296         sleep3: sleep-states {
1297                 PIN_SLP(gpv0-0, INPUT, DOWN);
1298                 PIN_SLP(gpv0-1, INPUT, DOWN);
1299                 PIN_SLP(gpv0-2, INPUT, DOWN);
1300                 PIN_SLP(gpv0-3, INPUT, DOWN);
1301                 PIN_SLP(gpv0-4, INPUT, DOWN);
1302                 PIN_SLP(gpv0-5, INPUT, DOWN);
1303                 PIN_SLP(gpv0-6, INPUT, DOWN);
1304                 PIN_SLP(gpv0-7, INPUT, DOWN);
1305
1306                 PIN_SLP(gpv1-0, INPUT, DOWN);
1307                 PIN_SLP(gpv1-1, INPUT, DOWN);
1308                 PIN_SLP(gpv1-2, INPUT, DOWN);
1309                 PIN_SLP(gpv1-3, INPUT, DOWN);
1310                 PIN_SLP(gpv1-4, INPUT, DOWN);
1311                 PIN_SLP(gpv1-5, INPUT, DOWN);
1312                 PIN_SLP(gpv1-6, INPUT, DOWN);
1313                 PIN_SLP(gpv1-7, INPUT, DOWN);
1314
1315                 PIN_SLP(gpv2-0, INPUT, DOWN);
1316                 PIN_SLP(gpv2-1, INPUT, DOWN);
1317                 PIN_SLP(gpv2-2, INPUT, DOWN);
1318                 PIN_SLP(gpv2-3, INPUT, DOWN);
1319                 PIN_SLP(gpv2-4, INPUT, DOWN);
1320                 PIN_SLP(gpv2-5, INPUT, DOWN);
1321                 PIN_SLP(gpv2-6, INPUT, DOWN);
1322                 PIN_SLP(gpv2-7, INPUT, DOWN);
1323
1324                 PIN_SLP(gpv3-0, INPUT, DOWN);
1325                 PIN_SLP(gpv3-1, INPUT, DOWN);
1326                 PIN_SLP(gpv3-2, INPUT, DOWN);
1327                 PIN_SLP(gpv3-3, INPUT, DOWN);
1328                 PIN_SLP(gpv3-4, INPUT, DOWN);
1329                 PIN_SLP(gpv3-5, INPUT, DOWN);
1330                 PIN_SLP(gpv3-6, INPUT, DOWN);
1331                 PIN_SLP(gpv3-7, INPUT, DOWN);
1332
1333                 PIN_SLP(gpv4-0, INPUT, DOWN);
1334         };
1335 };
1336
1337 &pwm {
1338         pinctrl-0 = <&pwm0_out>;
1339         pinctrl-names = "default";
1340         samsung,pwm-outputs = <0>;
1341         status = "okay";
1342 };
1343
1344 &rtc {
1345         status = "okay";
1346         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1347         clock-names = "rtc", "rtc_src";
1348 };
1349
1350 &sdhci_2 {
1351         bus-width = <4>;
1352         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1353         cd-inverted;
1354         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1355         pinctrl-names = "default";
1356         vmmc-supply = <&ldo21_reg>;
1357         status = "okay";
1358 };
1359
1360 &sdhci_3 {
1361         #address-cells = <1>;
1362         #size-cells = <0>;
1363         non-removable;
1364         bus-width = <4>;
1365
1366         mmc-pwrseq = <&wlan_pwrseq>;
1367         pinctrl-names = "default";
1368         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1369         status = "okay";
1370
1371         brcmf: wifi@1 {
1372                 reg = <1>;
1373                 compatible = "brcm,bcm4329-fmac";
1374                 interrupt-parent = <&gpx2>;
1375                 interrupts = <5 IRQ_TYPE_NONE>;
1376                 interrupt-names = "host-wake";
1377         };
1378 };
1379
1380 &serial_0 {
1381         status = "okay";
1382 };
1383
1384 &serial_1 {
1385         status = "okay";
1386 };
1387
1388 &serial_2 {
1389         status = "okay";
1390 };
1391
1392 &serial_3 {
1393         status = "okay";
1394 };
1395
1396 &spi_1 {
1397         pinctrl-names = "default";
1398         pinctrl-0 = <&spi1_bus>;
1399         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1400         status = "okay";
1401
1402         s5c73m3_spi: s5c73m3@0 {
1403                 compatible = "samsung,s5c73m3";
1404                 spi-max-frequency = <50000000>;
1405                 reg = <0>;
1406                 controller-data {
1407                         samsung,spi-feedback-delay = <2>;
1408                 };
1409         };
1410 };
1411
1412 &tmu {
1413         vtmu-supply = <&ldo10_reg>;
1414         status = "okay";
1415 };