| blob | 475904894b8633464173b1b76f85e378c13ff4cb |
1 /*
2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
9 #include <dt-bindings/bus/ti-sysc.h>
10 #include <dt-bindings/clock/omap4.h>
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include <dt-bindings/pinctrl/omap.h>
14 #include <dt-bindings/clock/omap4.h>
16 / {
17 compatible = "ti,omap4430", "ti,omap4";
18 interrupt-parent = <&wakeupgen>;
19 #address-cells = <1>;
20 #size-cells = <1>;
21 chosen { };
23 aliases {
24 i2c0 = &i2c1;
25 i2c1 = &i2c2;
26 i2c2 = &i2c3;
27 i2c3 = &i2c4;
28 serial0 = &uart1;
29 serial1 = &uart2;
30 serial2 = &uart3;
31 serial3 = &uart4;
32 };
34 cpus {
35 #address-cells = <1>;
36 #size-cells = <0>;
38 cpu@0 {
39 compatible = "arm,cortex-a9";
40 device_type = "cpu";
41 next-level-cache = <&L2>;
42 reg = <0x0>;
44 clocks = <&dpll_mpu_ck>;
45 clock-names = "cpu";
47 clock-latency = <300000>; /* From omap-cpufreq driver */
48 };
49 cpu@1 {
50 compatible = "arm,cortex-a9";
51 device_type = "cpu";
52 next-level-cache = <&L2>;
53 reg = <0x1>;
54 };
55 };
57 /*
58 * Note that 4430 needs cross trigger interface (CTI) supported
59 * before we can configure the interrupts. This means sampling
60 * events are not supported for pmu. Note that 4460 does not use
61 * CTI, see also 4460.dtsi.
62 */
63 pmu {
64 compatible = "arm,cortex-a9-pmu";
65 ti,hwmods = "debugss";
66 };
68 gic: interrupt-controller@48241000 {
69 compatible = "arm,cortex-a9-gic";
70 interrupt-controller;
71 #interrupt-cells = <3>;
72 reg = <0x48241000 0x1000>,
73 <0x48240100 0x0100>;
74 interrupt-parent = <&gic>;
75 };
77 L2: l2-cache-controller@48242000 {
78 compatible = "arm,pl310-cache";
79 reg = <0x48242000 0x1000>;
80 cache-unified;
81 cache-level = <2>;
82 };
84 local-timer@48240600 {
85 compatible = "arm,cortex-a9-twd-timer";
86 clocks = <&mpu_periphclk>;
87 reg = <0x48240600 0x20>;
88 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
89 interrupt-parent = <&gic>;
90 };
92 wakeupgen: interrupt-controller@48281000 {
93 compatible = "ti,omap4-wugen-mpu";
94 interrupt-controller;
95 #interrupt-cells = <3>;
96 reg = <0x48281000 0x1000>;
97 interrupt-parent = <&gic>;
98 };
100 /*
101 * The soc node represents the soc top level view. It is used for IPs
102 * that are not memory mapped in the MPU view or for the MPU itself.
103 */
104 soc {
105 compatible = "ti,omap-infra";
106 mpu {
107 compatible = "ti,omap4-mpu";
108 ti,hwmods = "mpu";
109 sram = <&ocmcram>;
110 };
112 dsp {
113 compatible = "ti,omap3-c64";
114 ti,hwmods = "dsp";
115 };
117 iva {
118 compatible = "ti,ivahd";
119 ti,hwmods = "iva";
120 };
121 };
123 /*
124 * XXX: Use a flat representation of the OMAP4 interconnect.
125 * The real OMAP interconnect network is quite complex.
126 * Since it will not bring real advantage to represent that in DT for
127 * the moment, just use a fake OCP bus entry to represent the whole bus
128 * hierarchy.
129 */
130 ocp {
131 compatible = "ti,omap4-l3-noc", "simple-bus";
132 #address-cells = <1>;
133 #size-cells = <1>;
134 ranges;
135 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
136 reg = <0x44000000 0x1000>,
137 <0x44800000 0x2000>,
138 <0x45000000 0x1000>;
139 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
140 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
142 l4_cfg: l4@4a000000 {
143 compatible = "ti,omap4-l4-cfg", "simple-bus";
144 #address-cells = <1>;
145 #size-cells = <1>;
146 ranges = <0 0x4a000000 0x1000000>;
148 cm1: cm1@4000 {
149 compatible = "ti,omap4-cm1", "simple-bus";
150 reg = <0x4000 0x2000>;
151 #address-cells = <1>;
152 #size-cells = <1>;
153 ranges = <0 0x4000 0x2000>;
155 cm1_clocks: clocks {
156 #address-cells = <1>;
157 #size-cells = <0>;
158 };
160 cm1_clockdomains: clockdomains {
161 };
162 };
164 cm2: cm2@8000 {
165 compatible = "ti,omap4-cm2", "simple-bus";
166 reg = <0x8000 0x3000>;
167 #address-cells = <1>;
168 #size-cells = <1>;
169 ranges = <0 0x8000 0x3000>;
171 cm2_clocks: clocks {
172 #address-cells = <1>;
173 #size-cells = <0>;
174 };
176 cm2_clockdomains: clockdomains {
177 };
178 };
180 omap4_scm_core: scm@2000 {
181 compatible = "ti,omap4-scm-core", "simple-bus";
182 reg = <0x2000 0x1000>;
183 #address-cells = <1>;
184 #size-cells = <1>;
185 ranges = <0 0x2000 0x1000>;
186 ti,hwmods = "ctrl_module_core";
188 scm_conf: scm_conf@0 {
189 compatible = "syscon";
190 reg = <0x0 0x800>;
191 #address-cells = <1>;
192 #size-cells = <1>;
193 };
194 };
196 omap4_padconf_core: scm@100000 {
197 compatible = "ti,omap4-scm-padconf-core",
198 "simple-bus";
199 reg = <0x100000 0x1000>;
200 #address-cells = <1>;
201 #size-cells = <1>;
202 ranges = <0 0x100000 0x1000>;
203 ti,hwmods = "ctrl_module_pad_core";
205 omap4_pmx_core: pinmux@40 {
206 compatible = "ti,omap4-padconf",
207 "pinctrl-single";
208 reg = <0x40 0x0196>;
209 #address-cells = <1>;
210 #size-cells = <0>;
211 #pinctrl-cells = <1>;
212 #interrupt-cells = <1>;
213 interrupt-controller;
214 pinctrl-single,register-width = <16>;
215 pinctrl-single,function-mask = <0x7fff>;
216 };
218 omap4_padconf_global: omap4_padconf_global@5a0 {
219 compatible = "syscon",
220 "simple-bus";
221 reg = <0x5a0 0x170>;
222 #address-cells = <1>;
223 #size-cells = <1>;
224 ranges = <0 0x5a0 0x170>;
226 pbias_regulator: pbias_regulator@60 {
227 compatible = "ti,pbias-omap4", "ti,pbias-omap";
228 reg = <0x60 0x4>;
229 syscon = <&omap4_padconf_global>;
230 pbias_mmc_reg: pbias_mmc_omap4 {
231 regulator-name = "pbias_mmc_omap4";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <3000000>;
234 };
235 };
236 };
237 };
239 l4_wkup: l4@300000 {
240 compatible = "ti,omap4-l4-wkup", "simple-bus";
241 #address-cells = <1>;
242 #size-cells = <1>;
243 ranges = <0 0x300000 0x40000>;
245 counter32k: counter@4000 {
246 compatible = "ti,omap-counter32k";
247 reg = <0x4000 0x20>;
248 ti,hwmods = "counter_32k";
249 };
251 prm: prm@6000 {
252 compatible = "ti,omap4-prm";
253 reg = <0x6000 0x3000>;
254 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
255 #address-cells = <1>;
256 #size-cells = <1>;
257 ranges = <0 0x6000 0x3000>;
259 prm_clocks: clocks {
260 #address-cells = <1>;
261 #size-cells = <0>;
262 };
264 prm_clockdomains: clockdomains {
265 };
266 };
268 scrm: scrm@a000 {
269 compatible = "ti,omap4-scrm";
270 reg = <0xa000 0x2000>;
272 scrm_clocks: clocks {
273 #address-cells = <1>;
274 #size-cells = <0>;
275 };
277 scrm_clockdomains: clockdomains {
278 };
279 };
281 omap4_scm_wkup: scm@c000 {
282 compatible = "ti,omap4-scm-wkup";
283 reg = <0xc000 0x1000>;
284 ti,hwmods = "ctrl_module_wkup";
285 };
287 omap4_padconf_wkup: padconf@1e000 {
288 compatible = "ti,omap4-scm-padconf-wkup",
289 "simple-bus";
290 reg = <0x1e000 0x1000>;
291 #address-cells = <1>;
292 #size-cells = <1>;
293 ranges = <0 0x1e000 0x1000>;
294 ti,hwmods = "ctrl_module_pad_wkup";
296 omap4_pmx_wkup: pinmux@40 {
297 compatible = "ti,omap4-padconf",
298 "pinctrl-single";
299 reg = <0x40 0x0038>;
300 #address-cells = <1>;
301 #size-cells = <0>;
302 #pinctrl-cells = <1>;
303 #interrupt-cells = <1>;
304 interrupt-controller;
305 pinctrl-single,register-width = <16>;
306 pinctrl-single,function-mask = <0x7fff>;
307 };
308 };
309 };
310 };
312 ocmcram: ocmcram@40304000 {
313 compatible = "mmio-sram";
314 reg = <0x40304000 0xa000>; /* 40k */
315 };
317 sdma: dma-controller@4a056000 {
318 compatible = "ti,omap4430-sdma";
319 reg = <0x4a056000 0x1000>;
320 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
321 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
322 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
323 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
324 #dma-cells = <1>;
325 dma-channels = <32>;
326 dma-requests = <127>;
327 ti,hwmods = "dma_system";
328 };
330 gpio1: gpio@4a310000 {
331 compatible = "ti,omap4-gpio";
332 reg = <0x4a310000 0x200>;
333 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
334 ti,hwmods = "gpio1";
335 ti,gpio-always-on;
336 gpio-controller;
337 #gpio-cells = <2>;
338 interrupt-controller;
339 #interrupt-cells = <2>;
340 };
342 gpio2: gpio@48055000 {
343 compatible = "ti,omap4-gpio";
344 reg = <0x48055000 0x200>;
345 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
346 ti,hwmods = "gpio2";
347 gpio-controller;
348 #gpio-cells = <2>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
351 };
353 gpio3: gpio@48057000 {
354 compatible = "ti,omap4-gpio";
355 reg = <0x48057000 0x200>;
356 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
357 ti,hwmods = "gpio3";
358 gpio-controller;
359 #gpio-cells = <2>;
360 interrupt-controller;
361 #interrupt-cells = <2>;
362 };
364 gpio4: gpio@48059000 {
365 compatible = "ti,omap4-gpio";
366 reg = <0x48059000 0x200>;
367 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
368 ti,hwmods = "gpio4";
369 gpio-controller;
370 #gpio-cells = <2>;
371 interrupt-controller;
372 #interrupt-cells = <2>;
373 };
375 gpio5: gpio@4805b000 {
376 compatible = "ti,omap4-gpio";
377 reg = <0x4805b000 0x200>;
378 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
379 ti,hwmods = "gpio5";
380 gpio-controller;
381 #gpio-cells = <2>;
382 interrupt-controller;
383 #interrupt-cells = <2>;
384 };
386 gpio6: gpio@4805d000 {
387 compatible = "ti,omap4-gpio";
388 reg = <0x4805d000 0x200>;
389 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
390 ti,hwmods = "gpio6";
391 gpio-controller;
392 #gpio-cells = <2>;
393 interrupt-controller;
394 #interrupt-cells = <2>;
395 };
397 target-module@48076000 {
398 compatible = "ti,sysc-omap4", "ti,sysc";
399 ti,hwmods = "slimbus2";
400 reg = <0x48076000 0x4>,
401 <0x48076010 0x4>;
402 reg-names = "rev", "sysc";
403 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
404 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
405 <SYSC_IDLE_NO>,
406 <SYSC_IDLE_SMART>,
407 <SYSC_IDLE_SMART_WKUP>;
408 clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
409 clock-names = "fck";
410 #address-cells = <1>;
411 #size-cells = <1>;
412 ranges = <0 0x48076000 0x001000>;
414 /* No child device binding or driver in mainline */
415 };
417 elm: elm@48078000 {
418 compatible = "ti,am3352-elm";
419 reg = <0x48078000 0x2000>;
420 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
421 ti,hwmods = "elm";
422 status = "disabled";
423 };
425 gpmc: gpmc@50000000 {
426 compatible = "ti,omap4430-gpmc";
427 reg = <0x50000000 0x1000>;
428 #address-cells = <2>;
429 #size-cells = <1>;
430 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
431 dmas = <&sdma 4>;
432 dma-names = "rxtx";
433 gpmc,num-cs = <8>;
434 gpmc,num-waitpins = <4>;
435 ti,hwmods = "gpmc";
436 ti,no-idle-on-init;
437 clocks = <&l3_div_ck>;
438 clock-names = "fck";
439 interrupt-controller;
440 #interrupt-cells = <2>;
441 gpio-controller;
442 #gpio-cells = <2>;
443 };
445 uart1: serial@4806a000 {
446 compatible = "ti,omap4-uart";
447 reg = <0x4806a000 0x100>;
448 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
449 ti,hwmods = "uart1";
450 clock-frequency = <48000000>;
451 };
453 uart2: serial@4806c000 {
454 compatible = "ti,omap4-uart";
455 reg = <0x4806c000 0x100>;
456 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
457 ti,hwmods = "uart2";
458 clock-frequency = <48000000>;
459 };
461 uart3: serial@48020000 {
462 compatible = "ti,omap4-uart";
463 reg = <0x48020000 0x100>;
464 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
465 ti,hwmods = "uart3";
466 clock-frequency = <48000000>;
467 };
469 uart4: serial@4806e000 {
470 compatible = "ti,omap4-uart";
471 reg = <0x4806e000 0x100>;
472 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
473 ti,hwmods = "uart4";
474 clock-frequency = <48000000>;
475 };
477 target-module@4a0db000 {
478 compatible = "ti,sysc-omap4-sr", "ti,sysc";
479 ti,hwmods = "smartreflex_iva";
480 reg = <0x4a0db038 0x4>;
481 reg-names = "sysc";
482 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
483 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
484 <SYSC_IDLE_NO>,
485 <SYSC_IDLE_SMART>,
486 <SYSC_IDLE_SMART_WKUP>;
487 clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
488 clock-names = "fck";
489 #address-cells = <1>;
490 #size-cells = <1>;
491 ranges = <0 0x4a0db000 0x001000>;
493 smartreflex_iva: smartreflex@0 {
494 compatible = "ti,omap4-smartreflex-iva";
495 reg = <0 0x80>;
496 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
497 };
498 };
500 target-module@4a0dd000 {
501 compatible = "ti,sysc-omap4-sr", "ti,sysc";
502 ti,hwmods = "smartreflex_core";
503 reg = <0x4a0dd038 0x4>;
504 reg-names = "sysc";
505 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
506 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
507 <SYSC_IDLE_NO>,
508 <SYSC_IDLE_SMART>,
509 <SYSC_IDLE_SMART_WKUP>;
510 clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
511 clock-names = "fck";
512 #address-cells = <1>;
513 #size-cells = <1>;
514 ranges = <0 0x4a0dd000 0x001000>;
516 smartreflex_core: smartreflex@0 {
517 compatible = "ti,omap4-smartreflex-core";
518 reg = <0 0x80>;
519 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
520 };
521 };
523 target-module@4a0d9000 {
524 compatible = "ti,sysc-omap4-sr", "ti,sysc";
525 ti,hwmods = "smartreflex_mpu";
526 reg = <0x4a0d9038 0x4>;
527 reg-names = "sysc";
528 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
529 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
530 <SYSC_IDLE_NO>,
531 <SYSC_IDLE_SMART>,
532 <SYSC_IDLE_SMART_WKUP>;
533 clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
534 clock-names = "fck";
535 #address-cells = <1>;
536 #size-cells = <1>;
537 ranges = <0 0x4a0d9000 0x001000>;
539 smartreflex_mpu: smartreflex@0 {
540 compatible = "ti,omap4-smartreflex-mpu";
541 reg = <0 0x80>;
542 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
543 };
544 };
546 hwspinlock: spinlock@4a0f6000 {
547 compatible = "ti,omap4-hwspinlock";
548 reg = <0x4a0f6000 0x1000>;
549 ti,hwmods = "spinlock";
550 #hwlock-cells = <1>;
551 };
553 i2c1: i2c@48070000 {
554 compatible = "ti,omap4-i2c";
555 reg = <0x48070000 0x100>;
556 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
557 #address-cells = <1>;
558 #size-cells = <0>;
559 ti,hwmods = "i2c1";
560 };
562 i2c2: i2c@48072000 {
563 compatible = "ti,omap4-i2c";
564 reg = <0x48072000 0x100>;
565 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
566 #address-cells = <1>;
567 #size-cells = <0>;
568 ti,hwmods = "i2c2";
569 };
571 i2c3: i2c@48060000 {
572 compatible = "ti,omap4-i2c";
573 reg = <0x48060000 0x100>;
574 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
575 #address-cells = <1>;
576 #size-cells = <0>;
577 ti,hwmods = "i2c3";
578 };
580 i2c4: i2c@48350000 {
581 compatible = "ti,omap4-i2c";
582 reg = <0x48350000 0x100>;
583 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
584 #address-cells = <1>;
585 #size-cells = <0>;
586 ti,hwmods = "i2c4";
587 };
589 mcspi1: spi@48098000 {
590 compatible = "ti,omap4-mcspi";
591 reg = <0x48098000 0x200>;
592 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
593 #address-cells = <1>;
594 #size-cells = <0>;
595 ti,hwmods = "mcspi1";
596 ti,spi-num-cs = <4>;
597 dmas = <&sdma 35>,
598 <&sdma 36>,
599 <&sdma 37>,
600 <&sdma 38>,
601 <&sdma 39>,
602 <&sdma 40>,
603 <&sdma 41>,
604 <&sdma 42>;
605 dma-names = "tx0", "rx0", "tx1", "rx1",
606 "tx2", "rx2", "tx3", "rx3";
607 };
609 mcspi2: spi@4809a000 {
610 compatible = "ti,omap4-mcspi";
611 reg = <0x4809a000 0x200>;
612 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
613 #address-cells = <1>;
614 #size-cells = <0>;
615 ti,hwmods = "mcspi2";
616 ti,spi-num-cs = <2>;
617 dmas = <&sdma 43>,
618 <&sdma 44>,
619 <&sdma 45>,
620 <&sdma 46>;
621 dma-names = "tx0", "rx0", "tx1", "rx1";
622 };
624 hdqw1w: 1w@480b2000 {
625 compatible = "ti,omap3-1w";
626 reg = <0x480b2000 0x1000>;
627 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
628 ti,hwmods = "hdq1w";
629 };
631 mcspi3: spi@480b8000 {
632 compatible = "ti,omap4-mcspi";
633 reg = <0x480b8000 0x200>;
634 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
635 #address-cells = <1>;
636 #size-cells = <0>;
637 ti,hwmods = "mcspi3";
638 ti,spi-num-cs = <2>;
639 dmas = <&sdma 15>, <&sdma 16>;
640 dma-names = "tx0", "rx0";
641 };
643 mcspi4: spi@480ba000 {
644 compatible = "ti,omap4-mcspi";
645 reg = <0x480ba000 0x200>;
646 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
647 #address-cells = <1>;
648 #size-cells = <0>;
649 ti,hwmods = "mcspi4";
650 ti,spi-num-cs = <1>;
651 dmas = <&sdma 70>, <&sdma 71>;
652 dma-names = "tx0", "rx0";
653 };
655 mmc1: mmc@4809c000 {
656 compatible = "ti,omap4-hsmmc";
657 reg = <0x4809c000 0x400>;
658 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
659 ti,hwmods = "mmc1";
660 ti,dual-volt;
661 ti,needs-special-reset;
662 dmas = <&sdma 61>, <&sdma 62>;
663 dma-names = "tx", "rx";
664 pbias-supply = <&pbias_mmc_reg>;
665 };
667 mmc2: mmc@480b4000 {
668 compatible = "ti,omap4-hsmmc";
669 reg = <0x480b4000 0x400>;
670 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
671 ti,hwmods = "mmc2";
672 ti,needs-special-reset;
673 dmas = <&sdma 47>, <&sdma 48>;
674 dma-names = "tx", "rx";
675 };
677 mmc3: mmc@480ad000 {
678 compatible = "ti,omap4-hsmmc";
679 reg = <0x480ad000 0x400>;
680 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
681 ti,hwmods = "mmc3";
682 ti,needs-special-reset;
683 dmas = <&sdma 77>, <&sdma 78>;
684 dma-names = "tx", "rx";
685 };
687 mmc4: mmc@480d1000 {
688 compatible = "ti,omap4-hsmmc";
689 reg = <0x480d1000 0x400>;
690 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
691 ti,hwmods = "mmc4";
692 ti,needs-special-reset;
693 dmas = <&sdma 57>, <&sdma 58>;
694 dma-names = "tx", "rx";
695 };
697 mmc5: mmc@480d5000 {
698 compatible = "ti,omap4-hsmmc";
699 reg = <0x480d5000 0x400>;
700 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
701 ti,hwmods = "mmc5";
702 ti,needs-special-reset;
703 dmas = <&sdma 59>, <&sdma 60>;
704 dma-names = "tx", "rx";
705 };
707 hsi: hsi@4a058000 {
708 compatible = "ti,omap4-hsi";
709 reg = <0x4a058000 0x4000>,
710 <0x4a05c000 0x1000>;
711 reg-names = "sys", "gdd";
712 ti,hwmods = "hsi";
714 clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
715 clock-names = "hsi_fck";
717 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
718 interrupt-names = "gdd_mpu";
720 #address-cells = <1>;
721 #size-cells = <1>;
722 ranges = <0 0x4a058000 0x4000>;
724 hsi_port1: hsi-port@2000 {
725 compatible = "ti,omap4-hsi-port";
726 reg = <0x2000 0x800>,
727 <0x2800 0x800>;
728 reg-names = "tx", "rx";
729 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
730 };
732 hsi_port2: hsi-port@3000 {
733 compatible = "ti,omap4-hsi-port";
734 reg = <0x3000 0x800>,
735 <0x3800 0x800>;
736 reg-names = "tx", "rx";
737 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
738 };
739 };
741 mmu_dsp: mmu@4a066000 {
742 compatible = "ti,omap4-iommu";
743 reg = <0x4a066000 0x100>;
744 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
745 ti,hwmods = "mmu_dsp";
746 #iommu-cells = <0>;
747 };
749 target-module@52000000 {
750 compatible = "ti,sysc-omap4", "ti,sysc";
751 ti,hwmods = "iss";
752 reg = <0x52000000 0x4>,
753 <0x52000010 0x4>;
754 reg-names = "rev", "sysc";
755 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
756 ti,sysc-midle = <SYSC_IDLE_FORCE>,
757 <SYSC_IDLE_NO>,
758 <SYSC_IDLE_SMART>,
759 <SYSC_IDLE_SMART_WKUP>;
760 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
761 <SYSC_IDLE_NO>,
762 <SYSC_IDLE_SMART>,
763 <SYSC_IDLE_SMART_WKUP>;
764 ti,sysc-delay-us = <2>;
765 clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
766 clock-names = "fck";
767 #address-cells = <1>;
768 #size-cells = <1>;
769 ranges = <0 0x52000000 0x1000000>;
771 /* No child device binding, driver in staging */
772 };
774 mmu_ipu: mmu@55082000 {
775 compatible = "ti,omap4-iommu";
776 reg = <0x55082000 0x100>;
777 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
778 ti,hwmods = "mmu_ipu";
779 #iommu-cells = <0>;
780 ti,iommu-bus-err-back;
781 };
783 wdt2: wdt@4a314000 {
784 compatible = "ti,omap4-wdt", "ti,omap3-wdt";
785 reg = <0x4a314000 0x80>;
786 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
787 ti,hwmods = "wd_timer2";
788 };
790 wdt3: wdt@40130000 {
791 compatible = "ti,omap4-wdt", "ti,omap3-wdt";
792 reg = <0x40130000 0x80>, /* MPU private access */
793 <0x49030000 0x80>; /* L3 Interconnect */
794 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
795 ti,hwmods = "wd_timer3";
796 };
798 mcpdm: mcpdm@40132000 {
799 compatible = "ti,omap4-mcpdm";
800 reg = <0x40132000 0x7f>, /* MPU private access */
801 <0x49032000 0x7f>; /* L3 Interconnect */
802 reg-names = "mpu", "dma";
803 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
804 ti,hwmods = "mcpdm";
805 dmas = <&sdma 65>,
806 <&sdma 66>;
807 dma-names = "up_link", "dn_link";
808 status = "disabled";
809 };
811 dmic: dmic@4012e000 {
812 compatible = "ti,omap4-dmic";
813 reg = <0x4012e000 0x7f>, /* MPU private access */
814 <0x4902e000 0x7f>; /* L3 Interconnect */
815 reg-names = "mpu", "dma";
816 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
817 ti,hwmods = "dmic";
818 dmas = <&sdma 67>;
819 dma-names = "up_link";
820 status = "disabled";
821 };
823 mcbsp1: mcbsp@40122000 {
824 compatible = "ti,omap4-mcbsp";
825 reg = <0x40122000 0xff>, /* MPU private access */
826 <0x49022000 0xff>; /* L3 Interconnect */
827 reg-names = "mpu", "dma";
828 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
829 interrupt-names = "common";
830 ti,buffer-size = <128>;
831 ti,hwmods = "mcbsp1";
832 dmas = <&sdma 33>,
833 <&sdma 34>;
834 dma-names = "tx", "rx";
835 status = "disabled";
836 };
838 mcbsp2: mcbsp@40124000 {
839 compatible = "ti,omap4-mcbsp";
840 reg = <0x40124000 0xff>, /* MPU private access */
841 <0x49024000 0xff>; /* L3 Interconnect */
842 reg-names = "mpu", "dma";
843 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
844 interrupt-names = "common";
845 ti,buffer-size = <128>;
846 ti,hwmods = "mcbsp2";
847 dmas = <&sdma 17>,
848 <&sdma 18>;
849 dma-names = "tx", "rx";
850 status = "disabled";
851 };
853 mcbsp3: mcbsp@40126000 {
854 compatible = "ti,omap4-mcbsp";
855 reg = <0x40126000 0xff>, /* MPU private access */
856 <0x49026000 0xff>; /* L3 Interconnect */
857 reg-names = "mpu", "dma";
858 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
859 interrupt-names = "common";
860 ti,buffer-size = <128>;
861 ti,hwmods = "mcbsp3";
862 dmas = <&sdma 19>,
863 <&sdma 20>;
864 dma-names = "tx", "rx";
865 status = "disabled";
866 };
868 target-module@40128000 {
869 compatible = "ti,sysc-mcasp", "ti,sysc";
870 ti,hwmods = "mcasp";
871 reg = <0x40128000 0x4>,
872 <0x40128004 0x4>;
873 reg-names = "rev", "sysc";
874 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
875 <SYSC_IDLE_NO>,
876 <SYSC_IDLE_SMART>,
877 <SYSC_IDLE_SMART_WKUP>;
878 clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
879 clock-names = "fck";
880 #address-cells = <1>;
881 #size-cells = <1>;
882 ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
883 <0x49028000 0x49028000 0x1000>; /* L3 */
885 /*
886 * Child device unsupported by davinci-mcasp. At least
887 * RX path is disabled for omap4, and only DIT mode
888 * works with no I2S. See also old Android kernel
889 * omap-mcasp driver for more information.
890 */
891 };
893 target-module@4012c000 {
894 compatible = "ti,sysc-omap4", "ti,sysc";
895 ti,hwmods = "slimbus1";
896 reg = <0x4012c000 0x4>,
897 <0x4012c010 0x4>;
898 reg-names = "rev", "sysc";
899 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
900 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
901 <SYSC_IDLE_NO>,
902 <SYSC_IDLE_SMART>,
903 <SYSC_IDLE_SMART_WKUP>;
904 clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
905 clock-names = "fck";
906 #address-cells = <1>;
907 #size-cells = <1>;
908 ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
909 <0x4902c000 0x4902c000 0x1000>; /* L3 */
911 /* No child device binding or driver in mainline */
912 };
914 target-module@401f1000 {
915 compatible = "ti,sysc-omap4", "ti,sysc";
916 ti,hwmods = "aess";
917 reg = <0x401f1000 0x4>,
918 <0x401f1010 0x4>;
919 reg-names = "rev", "sysc";
920 ti,sysc-midle = <SYSC_IDLE_FORCE>,
921 <SYSC_IDLE_NO>,
922 <SYSC_IDLE_SMART>,
923 <SYSC_IDLE_SMART_WKUP>;
924 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
925 <SYSC_IDLE_NO>,
926 <SYSC_IDLE_SMART>;
927 clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
928 clock-names = "fck";
929 #address-cells = <1>;
930 #size-cells = <1>;
931 ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
932 <0x490f1000 0x490f1000 0x1000>; /* L3 */
934 /*
935 * No child device binding or driver in mainline.
936 * See Android tree and related upstreaming efforts
937 * for the old driver.
938 */
939 };
941 mcbsp4: mcbsp@48096000 {
942 compatible = "ti,omap4-mcbsp";
943 reg = <0x48096000 0xff>; /* L4 Interconnect */
944 reg-names = "mpu";
945 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
946 interrupt-names = "common";
947 ti,buffer-size = <128>;
948 ti,hwmods = "mcbsp4";
949 dmas = <&sdma 31>,
950 <&sdma 32>;
951 dma-names = "tx", "rx";
952 status = "disabled";
953 };
955 keypad: keypad@4a31c000 {
956 compatible = "ti,omap4-keypad";
957 reg = <0x4a31c000 0x80>;
958 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
959 reg-names = "mpu";
960 ti,hwmods = "kbd";
961 };
963 dmm@4e000000 {
964 compatible = "ti,omap4-dmm";
965 reg = <0x4e000000 0x800>;
966 interrupts = <0 113 0x4>;
967 ti,hwmods = "dmm";
968 };
970 emif1: emif@4c000000 {
971 compatible = "ti,emif-4d";
972 reg = <0x4c000000 0x100>;
973 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
974 ti,hwmods = "emif1";
975 ti,no-idle-on-init;
976 phy-type = <1>;
977 hw-caps-read-idle-ctrl;
978 hw-caps-ll-interface;
979 hw-caps-temp-alert;
980 };
982 emif2: emif@4d000000 {
983 compatible = "ti,emif-4d";
984 reg = <0x4d000000 0x100>;
985 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
986 ti,hwmods = "emif2";
987 ti,no-idle-on-init;
988 phy-type = <1>;
989 hw-caps-read-idle-ctrl;
990 hw-caps-ll-interface;
991 hw-caps-temp-alert;
992 };
994 ocp2scp@4a0ad000 {
995 compatible = "ti,omap-ocp2scp";
996 reg = <0x4a0ad000 0x1f>;
997 #address-cells = <1>;
998 #size-cells = <1>;
999 ranges;
1000 ti,hwmods = "ocp2scp_usb_phy";
1001 usb2_phy: usb2phy@4a0ad080 {
1002 compatible = "ti,omap-usb2";
1003 reg = <0x4a0ad080 0x58>;
1004 ctrl-module = <&omap_control_usb2phy>;
1005 clocks = <&usb_phy_cm_clk32k>;
1006 clock-names = "wkupclk";
1007 #phy-cells = <0>;
1008 };
1009 };
1011 mailbox: mailbox@4a0f4000 {
1012 compatible = "ti,omap4-mailbox";
1013 reg = <0x4a0f4000 0x200>;
1014 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
1015 ti,hwmods = "mailbox";
1016 #mbox-cells = <1>;
1017 ti,mbox-num-users = <3>;
1018 ti,mbox-num-fifos = <8>;
1019 mbox_ipu: mbox_ipu {
1020 ti,mbox-tx = <0 0 0>;
1021 ti,mbox-rx = <1 0 0>;
1022 };
1023 mbox_dsp: mbox_dsp {
1024 ti,mbox-tx = <3 0 0>;
1025 ti,mbox-rx = <2 0 0>;
1026 };
1027 };
1029 target-module@4a10a000 {
1030 compatible = "ti,sysc-omap4", "ti,sysc";
1031 ti,hwmods = "fdif";
1032 reg = <0x4a10a000 0x4>,
1033 <0x4a10a010 0x4>;
1034 reg-names = "rev", "sysc";
1035 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1036 ti,sysc-midle = <SYSC_IDLE_FORCE>,
1037 <SYSC_IDLE_NO>,
1038 <SYSC_IDLE_SMART>;
1039 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1040 <SYSC_IDLE_NO>,
1041 <SYSC_IDLE_SMART>;
1042 ti,sysc-delay-us = <2>;
1043 clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
1044 clock-names = "fck";
1045 #address-cells = <1>;
1046 #size-cells = <1>;
1047 ranges = <0 0x4a10a000 0x1000>;
1049 /* No child device binding or driver in mainline */
1050 };
1052 timer1: timer@4a318000 {
1053 compatible = "ti,omap3430-timer";
1054 reg = <0x4a318000 0x80>;
1055 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1056 ti,hwmods = "timer1";
1057 ti,timer-alwon;
1058 clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
1059 clock-names = "fck";
1060 };
1062 timer2: timer@48032000 {
1063 compatible = "ti,omap3430-timer";
1064 reg = <0x48032000 0x80>;
1065 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1066 ti,hwmods = "timer2";
1067 };
1069 timer3: timer@48034000 {
1070 compatible = "ti,omap4430-timer";
1071 reg = <0x48034000 0x80>;
1072 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
1073 ti,hwmods = "timer3";
1074 };
1076 timer4: timer@48036000 {
1077 compatible = "ti,omap4430-timer";
1078 reg = <0x48036000 0x80>;
1079 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1080 ti,hwmods = "timer4";
1081 };
1083 timer5: timer@40138000 {
1084 compatible = "ti,omap4430-timer";
1085 reg = <0x40138000 0x80>,
1086 <0x49038000 0x80>;
1087 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1088 ti,hwmods = "timer5";
1089 ti,timer-dsp;
1090 };
1092 timer6: timer@4013a000 {
1093 compatible = "ti,omap4430-timer";
1094 reg = <0x4013a000 0x80>,
1095 <0x4903a000 0x80>;
1096 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
1097 ti,hwmods = "timer6";
1098 ti,timer-dsp;
1099 };
1101 timer7: timer@4013c000 {
1102 compatible = "ti,omap4430-timer";
1103 reg = <0x4013c000 0x80>,
1104 <0x4903c000 0x80>;
1105 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1106 ti,hwmods = "timer7";
1107 ti,timer-dsp;
1108 };
1110 timer8: timer@4013e000 {
1111 compatible = "ti,omap4430-timer";
1112 reg = <0x4013e000 0x80>,
1113 <0x4903e000 0x80>;
1114 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
1115 ti,hwmods = "timer8";
1116 ti,timer-pwm;
1117 ti,timer-dsp;
1118 };
1120 timer9: timer@4803e000 {
1121 compatible = "ti,omap4430-timer";
1122 reg = <0x4803e000 0x80>;
1123 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
1124 ti,hwmods = "timer9";
1125 ti,timer-pwm;
1126 };
1128 timer10: timer@48086000 {
1129 compatible = "ti,omap3430-timer";
1130 reg = <0x48086000 0x80>;
1131 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1132 ti,hwmods = "timer10";
1133 ti,timer-pwm;
1134 };
1136 timer11: timer@48088000 {
1137 compatible = "ti,omap4430-timer";
1138 reg = <0x48088000 0x80>;
1139 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1140 ti,hwmods = "timer11";
1141 ti,timer-pwm;
1142 };
1144 usbhstll: usbhstll@4a062000 {
1145 compatible = "ti,usbhs-tll";
1146 reg = <0x4a062000 0x1000>;
1147 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1148 ti,hwmods = "usb_tll_hs";
1149 };
1151 usbhshost: usbhshost@4a064000 {
1152 compatible = "ti,usbhs-host";
1153 reg = <0x4a064000 0x800>;
1154 ti,hwmods = "usb_host_hs";
1155 #address-cells = <1>;
1156 #size-cells = <1>;
1157 ranges;
1158 clocks = <&init_60m_fclk>,
1159 <&xclk60mhsp1_ck>,
1160 <&xclk60mhsp2_ck>;
1161 clock-names = "refclk_60m_int",
1162 "refclk_60m_ext_p1",
1163 "refclk_60m_ext_p2";
1165 usbhsohci: ohci@4a064800 {
1166 compatible = "ti,ohci-omap3";
1167 reg = <0x4a064800 0x400>;
1168 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
1169 remote-wakeup-connected;
1170 };
1172 usbhsehci: ehci@4a064c00 {
1173 compatible = "ti,ehci-omap";
1174 reg = <0x4a064c00 0x400>;
1175 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
1176 };
1177 };
1179 omap_control_usb2phy: control-phy@4a002300 {
1180 compatible = "ti,control-phy-usb2";
1181 reg = <0x4a002300 0x4>;
1182 reg-names = "power";
1183 };
1185 omap_control_usbotg: control-phy@4a00233c {
1186 compatible = "ti,control-phy-otghs";
1187 reg = <0x4a00233c 0x4>;
1188 reg-names = "otghs_control";
1189 };
1191 usb_otg_hs: usb_otg_hs@4a0ab000 {
1192 compatible = "ti,omap4-musb";
1193 reg = <0x4a0ab000 0x7ff>;
1194 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
1195 interrupt-names = "mc", "dma";
1196 ti,hwmods = "usb_otg_hs";
1197 usb-phy = <&usb2_phy>;
1198 phys = <&usb2_phy>;
1199 phy-names = "usb2-phy";
1200 multipoint = <1>;
1201 num-eps = <16>;
1202 ram-bits = <12>;
1203 ctrl-module = <&omap_control_usbotg>;
1204 };
1206 aes1: aes@4b501000 {
1207 compatible = "ti,omap4-aes";
1208 ti,hwmods = "aes1";
1209 reg = <0x4b501000 0xa0>;
1210 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1211 dmas = <&sdma 111>, <&sdma 110>;
1212 dma-names = "tx", "rx";
1213 };
1215 aes2: aes@4b701000 {
1216 compatible = "ti,omap4-aes";
1217 ti,hwmods = "aes2";
1218 reg = <0x4b701000 0xa0>;
1219 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
1220 dmas = <&sdma 114>, <&sdma 113>;
1221 dma-names = "tx", "rx";
1222 };
1224 des: des@480a5000 {
1225 compatible = "ti,omap4-des";
1226 ti,hwmods = "des";
1227 reg = <0x480a5000 0xa0>;
1228 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
1229 dmas = <&sdma 117>, <&sdma 116>;
1230 dma-names = "tx", "rx";
1231 };
1233 sham: sham@4b100000 {
1234 compatible = "ti,omap4-sham";
1235 ti,hwmods = "sham";
1236 reg = <0x4b100000 0x300>;
1237 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1238 dmas = <&sdma 119>;
1239 dma-names = "rx";
1240 };
1242 abb_mpu: regulator-abb-mpu {
1243 compatible = "ti,abb-v2";
1244 regulator-name = "abb_mpu";
1245 #address-cells = <0>;
1246 #size-cells = <0>;
1247 ti,tranxdone-status-mask = <0x80>;
1248 clocks = <&sys_clkin_ck>;
1249 ti,settling-time = <50>;
1250 ti,clock-cycles = <16>;
1252 status = "disabled";
1253 };
1255 abb_iva: regulator-abb-iva {
1256 compatible = "ti,abb-v2";
1257 regulator-name = "abb_iva";
1258 #address-cells = <0>;
1259 #size-cells = <0>;
1260 ti,tranxdone-status-mask = <0x80000000>;
1261 clocks = <&sys_clkin_ck>;
1262 ti,settling-time = <50>;
1263 ti,clock-cycles = <16>;
1265 status = "disabled";
1266 };
1268 target-module@56000000 {
1269 compatible = "ti,sysc-omap4", "ti,sysc";
1270 ti,hwmods = "gpu";
1271 reg = <0x5601fc00 0x4>,
1272 <0x5601fc10 0x4>;
1273 reg-names = "rev", "sysc";
1274 ti,sysc-midle = <SYSC_IDLE_FORCE>,
1275 <SYSC_IDLE_NO>,
1276 <SYSC_IDLE_SMART>,
1277 <SYSC_IDLE_SMART_WKUP>;
1278 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1279 <SYSC_IDLE_NO>,
1280 <SYSC_IDLE_SMART>,
1281 <SYSC_IDLE_SMART_WKUP>;
1282 clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
1283 clock-names = "fck";
1284 #address-cells = <1>;
1285 #size-cells = <1>;
1286 ranges = <0 0x56000000 0x2000000>;
1288 /*
1289 * Closed source PowerVR driver, no child device
1290 * binding or driver in mainline
1291 */
1292 };
1294 dss: dss@58000000 {
1295 compatible = "ti,omap4-dss";
1296 reg = <0x58000000 0x80>;
1297 status = "disabled";
1298 ti,hwmods = "dss_core";
1299 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
1300 clock-names = "fck";
1301 #address-cells = <1>;
1302 #size-cells = <1>;
1303 ranges;
1305 dispc@58001000 {
1306 compatible = "ti,omap4-dispc";
1307 reg = <0x58001000 0x1000>;
1308 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1309 ti,hwmods = "dss_dispc";
1310 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
1311 clock-names = "fck";
1312 };
1314 rfbi: encoder@58002000 {
1315 compatible = "ti,omap4-rfbi";
1316 reg = <0x58002000 0x1000>;
1317 status = "disabled";
1318 ti,hwmods = "dss_rfbi";
1319 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
1320 clock-names = "fck", "ick";
1321 };
1323 venc: encoder@58003000 {
1324 compatible = "ti,omap4-venc";
1325 reg = <0x58003000 0x1000>;
1326 status = "disabled";
1327 ti,hwmods = "dss_venc";
1328 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
1329 clock-names = "fck";
1330 };
1332 dsi1: encoder@58004000 {
1333 compatible = "ti,omap4-dsi";
1334 reg = <0x58004000 0x200>,
1335 <0x58004200 0x40>,
1336 <0x58004300 0x20>;
1337 reg-names = "proto", "phy", "pll";
1338 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1339 status = "disabled";
1340 ti,hwmods = "dss_dsi1";
1341 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
1342 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
1343 clock-names = "fck", "sys_clk";
1344 };
1346 dsi2: encoder@58005000 {
1347 compatible = "ti,omap4-dsi";
1348 reg = <0x58005000 0x200>,
1349 <0x58005200 0x40>,
1350 <0x58005300 0x20>;
1351 reg-names = "proto", "phy", "pll";
1352 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1353 status = "disabled";
1354 ti,hwmods = "dss_dsi2";
1355 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
1356 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
1357 clock-names = "fck", "sys_clk";
1358 };
1360 hdmi: encoder@58006000 {
1361 compatible = "ti,omap4-hdmi";
1362 reg = <0x58006000 0x200>,
1363 <0x58006200 0x100>,
1364 <0x58006300 0x100>,
1365 <0x58006400 0x1000>;
1366 reg-names = "wp", "pll", "phy", "core";
1367 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1368 status = "disabled";
1369 ti,hwmods = "dss_hdmi";
1370 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
1371 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
1372 clock-names = "fck", "sys_clk";
1373 dmas = <&sdma 76>;
1374 dma-names = "audio_tx";
1375 };
1376 };
1377 };
1378 };
1380 #include "omap44xx-clocks.dtsi"