Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt

   1 * Amlogic Meson8, Meson8b and GXBB USB2 PHY
   2
   3 Required properties:
   4 - compatible:   Depending on the platform this should be one of:
   5         "amlogic,meson8-usb2-phy"
   6         "amlogic,meson8b-usb2-phy"
   7         "amlogic,meson-gxbb-usb2-phy"
   8 - reg:          The base address and length of the registers
   9 - #phys-cells:  should be 0 (see phy-bindings.txt in this directory)
  10 - clocks:       phandle and clock identifier for the phy clocks
  11 - clock-names:  "usb_general" and "usb"
  12
  13 Optional properties:
  14 - resets:       reference to the reset controller
  15 - phy-supply:   see phy-bindings.txt in this directory
  16
  17
  18 Example:
  19
  20 usb0_phy: usb-phy@c0000000 {
  21         compatible = "amlogic,meson-gxbb-usb2-phy";
  22         #phy-cells = <0>;
  23         reg = <0x0 0xc0000000 0x0 0x20>;
  24         resets = <&reset RESET_USB_OTG>;
  25         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
  26         clock-names = "usb_general", "usb";
  27         phy-supply = <&usb_vbus>;
  28 };