Documentation/devicetree/bindings/power/wakeup-source.txt

   1 Specifying wakeup capability for devices
   2 ============================================
   3
   4 Any device nodes
   5 ----------------
   6 Nodes that describe devices which has wakeup capability must contain an
   7 "wakeup-source" boolean property.
   8
   9 Also, if device is marked as a wakeup source, then all the primary
  10 interrupt(s) can be used as wakeup interrupt(s).
  11
  12 However if the devices have dedicated interrupt as the wakeup source
  13 then they need to specify/identify the same using device specific
  14 interrupt name. In such cases only that interrupt can be used as wakeup
  15 interrupt.
  16
  17 List of legacy properties and respective binding document
  18 ---------------------------------------------------------
  19
  20 1. "enable-sdio-wakeup"         Documentation/devicetree/bindings/mmc/mmc.txt
  21 2. "gpio-key,wakeup"            Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
  22 3. "has-tpo"                    Documentation/devicetree/bindings/rtc/rtc-opal.txt
  23 4. "linux,wakeup"               Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
  24                                 Documentation/devicetree/bindings/mfd/tc3589x.txt
  25                                 Documentation/devicetree/bindings/input/ads7846.txt
  26 5. "linux,keypad-wakeup"        Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
  27 6. "linux,input-wakeup"         Documentation/devicetree/bindings/input/samsung-keypad.txt
  28 7. "nvidia,wakeup-source"       Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
  29
  30 Examples
  31 --------
  32
  33 1. With "wakeup" interrupt name
  34
  35         device@10000 {
  36                 compatible      = "vendor,device-id";
  37                 reg             = <0x10000 0x1000>;
  38                 interrupts      = <0 19 4>, <0 21 4>, <0 22 4>;
  39                 interrupt-names = "ack", "err", "wakeup";
  40                 wakeup-source;
  41         };
  42
  43 2. Without "wakeup" interrupt name
  44
  45         embedded-controller {
  46                 compatible = "google,cros-ec-i2c";
  47                 reg = <0x1e>;
  48                 interrupts = <6 0>;
  49                 interrupt-parent = <&gpx1>;
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&ec_irq>;
  52                 wakeup-source;
  53         };
  54
  55 3. Without interrupts
  56
  57         gpio_keys {
  58                 compatible = "gpio-keys";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61
  62                 button@1 {
  63                         debounce-interval = <50>;
  64                         wakeup-source;
  65                         linux,code = <116>;
  66                         label = "POWER";
  67                         gpios = <&iofpga_gpio0 0 0x4>;
  68                 };
  69                 [....]
  70         };