arch/arm/mach-ixp4xx/omixp-setup.c

   1 /*
   2  * arch/arm/mach-ixp4xx/omixp-setup.c
   3  *
   4  * omicron ixp4xx board setup
   5  *      Copyright (C) 2009 OMICRON electronics GmbH
   6  *
   7  * based nslu2-setup.c, ixdp425-setup.c:
   8  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/serial.h>
  17 #include <linux/serial_8250.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/partitions.h>
  20 #include <linux/leds.h>
  21
  22 #include <asm/setup.h>
  23 #include <asm/memory.h>
  24 #include <asm/mach-types.h>
  25 #include <asm/mach/arch.h>
  26 #include <asm/mach/flash.h>
  27
  28 #include <mach/hardware.h>
  29
  30 static struct resource omixp_flash_resources[] = {
  31         {
  32                 .flags  = IORESOURCE_MEM,
  33         }, {
  34                 .flags  = IORESOURCE_MEM,
  35         },
  36 };
  37
  38 static struct mtd_partition omixp_partitions[] = {
  39         {
  40                 .name =         "Recovery Bootloader",
  41                 .size =         0x00020000,
  42                 .offset =       0,
  43         }, {
  44                 .name =         "Calibration Data",
  45                 .size =         0x00020000,
  46                 .offset =       0x00020000,
  47         }, {
  48                 .name =         "Recovery FPGA",
  49                 .size =         0x00020000,
  50                 .offset =       0x00040000,
  51         }, {
  52                 .name =         "Release Bootloader",
  53                 .size =         0x00020000,
  54                 .offset =       0x00060000,
  55         }, {
  56                 .name =         "Release FPGA",
  57                 .size =         0x00020000,
  58                 .offset =       0x00080000,
  59         }, {
  60                 .name =         "Kernel",
  61                 .size =         0x00160000,
  62                 .offset =       0x000a0000,
  63         }, {
  64                 .name =         "Filesystem",
  65                 .size =         0x00C00000,
  66                 .offset =       0x00200000,
  67         }, {
  68                 .name =         "Persistent Storage",
  69                 .size =         0x00200000,
  70                 .offset =       0x00E00000,
  71         },
  72 };
  73
  74 static struct flash_platform_data omixp_flash_data[] = {
  75         {
  76                 .map_name       = "cfi_probe",
  77                 .parts          = omixp_partitions,
  78                 .nr_parts       = ARRAY_SIZE(omixp_partitions),
  79         }, {
  80                 .map_name       = "cfi_probe",
  81                 .parts          = NULL,
  82                 .nr_parts       = 0,
  83         },
  84 };
  85
  86 static struct platform_device omixp_flash_device[] = {
  87         {
  88                 .name           = "IXP4XX-Flash",
  89                 .id             = 0,
  90                 .dev = {
  91                         .platform_data = &omixp_flash_data[0],
  92                 },
  93                 .resource = &omixp_flash_resources[0],
  94                 .num_resources = 1,
  95         }, {
  96                 .name           = "IXP4XX-Flash",
  97                 .id             = 1,
  98                 .dev = {
  99                         .platform_data = &omixp_flash_data[1],
 100                 },
 101                 .resource = &omixp_flash_resources[1],
 102                 .num_resources = 1,
 103         },
 104 };
 105
 106 /* Swap UART's - These boards have the console on UART2. The following
 107  * configuration is used:
 108  *      ttyS0 .. UART2
 109  *      ttyS1 .. UART1
 110  * This way standard images can be used with the kernel that expect
 111  * the console on ttyS0.
 112  */
 113 static struct resource omixp_uart_resources[] = {
 114         {
 115                 .start          = IXP4XX_UART2_BASE_PHYS,
 116                 .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 117                 .flags          = IORESOURCE_MEM,
 118         }, {
 119                 .start          = IXP4XX_UART1_BASE_PHYS,
 120                 .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 121                 .flags          = IORESOURCE_MEM,
 122         },
 123 };
 124
 125 static struct plat_serial8250_port omixp_uart_data[] = {
 126         {
 127                 .mapbase        = IXP4XX_UART2_BASE_PHYS,
 128                 .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 129                 .irq            = IRQ_IXP4XX_UART2,
 130                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 131                 .iotype         = UPIO_MEM,
 132                 .regshift       = 2,
 133                 .uartclk        = IXP4XX_UART_XTAL,
 134         }, {
 135                 .mapbase        = IXP4XX_UART1_BASE_PHYS,
 136                 .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 137                 .irq            = IRQ_IXP4XX_UART1,
 138                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 139                 .iotype         = UPIO_MEM,
 140                 .regshift       = 2,
 141                 .uartclk        = IXP4XX_UART_XTAL,
 142         }, {
 143                 /* list termination */
 144         }
 145 };
 146
 147 static struct platform_device omixp_uart = {
 148         .name                   = "serial8250",
 149         .id                     = PLAT8250_DEV_PLATFORM,
 150         .dev.platform_data      = omixp_uart_data,
 151         .num_resources          = 2,
 152         .resource               = omixp_uart_resources,
 153 };
 154
 155 static struct gpio_led mic256_led_pins[] = {
 156         {
 157                 .name           = "LED-A",
 158                 .gpio           = 7,
 159         },
 160 };
 161
 162 static struct gpio_led_platform_data mic256_led_data = {
 163         .num_leds               = ARRAY_SIZE(mic256_led_pins),
 164         .leds                   = mic256_led_pins,
 165 };
 166
 167 static struct platform_device mic256_leds = {
 168         .name                   = "leds-gpio",
 169         .id                     = -1,
 170         .dev.platform_data      = &mic256_led_data,
 171 };
 172
 173 /* Built-in 10/100 Ethernet MAC interfaces */
 174 static struct eth_plat_info ixdp425_plat_eth[] = {
 175         {
 176                 .phy            = 0,
 177                 .rxq            = 3,
 178                 .txreadyq       = 20,
 179         }, {
 180                 .phy            = 1,
 181                 .rxq            = 4,
 182                 .txreadyq       = 21,
 183         },
 184 };
 185
 186 static struct platform_device ixdp425_eth[] = {
 187         {
 188                 .name                   = "ixp4xx_eth",
 189                 .id                     = IXP4XX_ETH_NPEB,
 190                 .dev.platform_data      = ixdp425_plat_eth,
 191         }, {
 192                 .name                   = "ixp4xx_eth",
 193                 .id                     = IXP4XX_ETH_NPEC,
 194                 .dev.platform_data      = ixdp425_plat_eth + 1,
 195         },
 196 };
 197
 198
 199 static struct platform_device *devixp_pldev[] __initdata = {
 200         &omixp_uart,
 201         &omixp_flash_device[0],
 202         &ixdp425_eth[0],
 203         &ixdp425_eth[1],
 204 };
 205
 206 static struct platform_device *mic256_pldev[] __initdata = {
 207         &omixp_uart,
 208         &omixp_flash_device[0],
 209         &mic256_leds,
 210         &ixdp425_eth[0],
 211         &ixdp425_eth[1],
 212 };
 213
 214 static struct platform_device *miccpt_pldev[] __initdata = {
 215         &omixp_uart,
 216         &omixp_flash_device[0],
 217         &omixp_flash_device[1],
 218         &ixdp425_eth[0],
 219         &ixdp425_eth[1],
 220 };
 221
 222 static void __init omixp_init(void)
 223 {
 224         ixp4xx_sys_init();
 225
 226         /* 16MiB Boot Flash */
 227         omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
 228         omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
 229
 230         /* 32 MiB Data Flash */
 231         omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
 232         omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
 233
 234         if (machine_is_devixp())
 235                 platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
 236         else if (machine_is_miccpt())
 237                 platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
 238         else if (machine_is_mic256())
 239                 platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
 240 }
 241
 242 #ifdef CONFIG_MACH_DEVIXP
 243 MACHINE_START(DEVIXP, "Omicron DEVIXP")
 244         .atag_offset    = 0x100,
 245         .map_io         = ixp4xx_map_io,
 246         .init_early     = ixp4xx_init_early,
 247         .init_irq       = ixp4xx_init_irq,
 248         .init_time      = ixp4xx_timer_init,
 249         .init_machine   = omixp_init,
 250         .restart        = ixp4xx_restart,
 251 MACHINE_END
 252 #endif
 253
 254 #ifdef CONFIG_MACH_MICCPT
 255 MACHINE_START(MICCPT, "Omicron MICCPT")
 256         .atag_offset    = 0x100,
 257         .map_io         = ixp4xx_map_io,
 258         .init_early     = ixp4xx_init_early,
 259         .init_irq       = ixp4xx_init_irq,
 260         .init_time      = ixp4xx_timer_init,
 261         .init_machine   = omixp_init,
 262 #if defined(CONFIG_PCI)
 263         .dma_zone_size  = SZ_64M,
 264 #endif
 265         .restart        = ixp4xx_restart,
 266 MACHINE_END
 267 #endif
 268
 269 #ifdef CONFIG_MACH_MIC256
 270 MACHINE_START(MIC256, "Omicron MIC256")
 271         .atag_offset    = 0x100,
 272         .map_io         = ixp4xx_map_io,
 273         .init_early     = ixp4xx_init_early,
 274         .init_irq       = ixp4xx_init_irq,
 275         .init_time      = ixp4xx_timer_init,
 276         .init_machine   = omixp_init,
 277         .restart        = ixp4xx_restart,
 278 MACHINE_END
 279 #endif