2 * Versatile Express Serial Power Controller (SPC) support
4 * Copyright (C) 2013 ARM Ltd.
6 * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
7 * Achin Gupta <achin.gupta@arm.com>
8 * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
15 * kind, whether express or implied; without even the implied warranty
16 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 #include <linux/clk-provider.h>
21 #include <linux/clkdev.h>
22 #include <linux/cpu.h>
23 #include <linux/delay.h>
24 #include <linux/err.h>
25 #include <linux/interrupt.h>
27 #include <linux/platform_device.h>
28 #include <linux/pm_opp.h>
29 #include <linux/slab.h>
30 #include <linux/semaphore.h>
32 #include <asm/cacheflush.h>
36 #define SPCLOG "vexpress-spc: "
38 #define PERF_LVL_A15 0x00
39 #define PERF_REQ_A15 0x04
40 #define PERF_LVL_A7 0x08
41 #define PERF_REQ_A7 0x0c
43 #define COMMS_REQ 0x14
44 #define PWC_STATUS 0x18
47 /* SPC wake-up IRQs status and mask */
48 #define WAKE_INT_MASK 0x24
49 #define WAKE_INT_RAW 0x28
50 #define WAKE_INT_STAT 0x2c
51 /* SPC power down registers */
52 #define A15_PWRDN_EN 0x30
53 #define A7_PWRDN_EN 0x34
54 /* SPC per-CPU mailboxes */
55 #define A15_BX_ADDR0 0x68
56 #define A7_BX_ADDR0 0x78
58 /* SPC CPU/cluster reset statue */
59 #define STANDBYWFI_STAT 0x3c
60 #define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
61 #define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
63 /* SPC system config interface registers */
64 #define SYSCFG_WDATA 0x70
65 #define SYSCFG_RDATA 0x74
67 /* A15/A7 OPP virtual register base */
68 #define A15_PERFVAL_BASE 0xC10
69 #define A7_PERFVAL_BASE 0xC30
71 /* Config interface control bits */
72 #define SYSCFG_START (1 << 31)
73 #define SYSCFG_SCC (6 << 20)
74 #define SYSCFG_STAT (14 << 20)
76 /* wake-up interrupt masks */
77 #define GBL_WAKEUP_INT_MSK (0x3 << 10)
79 /* TC2 static dual-cluster configuration */
80 #define MAX_CLUSTERS 2
83 * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
84 * operation, the operation could start just before jiffie is about
85 * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
87 #define TIMEOUT_US 20000
93 #define STAT_COMPLETE(type) ((1 << 0) << (type << 2))
94 #define STAT_ERR(type) ((1 << 1) << (type << 2))
95 #define RESPONSE_MASK(type) (STAT_COMPLETE(type) | STAT_ERR(type))
102 struct ve_spc_drvdata
{
103 void __iomem
*baseaddr
;
105 * A15s cluster identifier
106 * It corresponds to A15 processors MPIDR[15:8] bitfield
109 uint32_t cur_rsp_mask
;
110 uint32_t cur_rsp_stat
;
111 struct semaphore sem
;
112 struct completion done
;
113 struct ve_spc_opp
*opps
[MAX_CLUSTERS
];
114 int num_opps
[MAX_CLUSTERS
];
117 static struct ve_spc_drvdata
*info
;
119 static inline bool cluster_is_a15(u32 cluster
)
121 return cluster
== info
->a15_clusid
;
125 * ve_spc_global_wakeup_irq()
127 * Function to set/clear global wakeup IRQs. Not protected by locking since
128 * it might be used in code paths where normal cacheable locks are not
129 * working. Locking must be provided by the caller to ensure atomicity.
131 * @set: if true, global wake-up IRQs are set, if false they are cleared
133 void ve_spc_global_wakeup_irq(bool set
)
137 reg
= readl_relaxed(info
->baseaddr
+ WAKE_INT_MASK
);
140 reg
|= GBL_WAKEUP_INT_MSK
;
142 reg
&= ~GBL_WAKEUP_INT_MSK
;
144 writel_relaxed(reg
, info
->baseaddr
+ WAKE_INT_MASK
);
148 * ve_spc_cpu_wakeup_irq()
150 * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
151 * it might be used in code paths where normal cacheable locks are not
152 * working. Locking must be provided by the caller to ensure atomicity.
154 * @cluster: mpidr[15:8] bitfield describing cluster affinity level
155 * @cpu: mpidr[7:0] bitfield describing cpu affinity level
156 * @set: if true, wake-up IRQs are set, if false they are cleared
158 void ve_spc_cpu_wakeup_irq(u32 cluster
, u32 cpu
, bool set
)
162 if (cluster
>= MAX_CLUSTERS
)
167 if (!cluster_is_a15(cluster
))
170 reg
= readl_relaxed(info
->baseaddr
+ WAKE_INT_MASK
);
177 writel_relaxed(reg
, info
->baseaddr
+ WAKE_INT_MASK
);
181 * ve_spc_set_resume_addr() - set the jump address used for warm boot
183 * @cluster: mpidr[15:8] bitfield describing cluster affinity level
184 * @cpu: mpidr[7:0] bitfield describing cpu affinity level
185 * @addr: physical resume address
187 void ve_spc_set_resume_addr(u32 cluster
, u32 cpu
, u32 addr
)
189 void __iomem
*baseaddr
;
191 if (cluster
>= MAX_CLUSTERS
)
194 if (cluster_is_a15(cluster
))
195 baseaddr
= info
->baseaddr
+ A15_BX_ADDR0
+ (cpu
<< 2);
197 baseaddr
= info
->baseaddr
+ A7_BX_ADDR0
+ (cpu
<< 2);
199 writel_relaxed(addr
, baseaddr
);
205 * Function to enable/disable cluster powerdown. Not protected by locking
206 * since it might be used in code paths where normal cacheable locks are not
207 * working. Locking must be provided by the caller to ensure atomicity.
209 * @cluster: mpidr[15:8] bitfield describing cluster affinity level
210 * @enable: if true enables powerdown, if false disables it
212 void ve_spc_powerdown(u32 cluster
, bool enable
)
216 if (cluster
>= MAX_CLUSTERS
)
219 pwdrn_reg
= cluster_is_a15(cluster
) ? A15_PWRDN_EN
: A7_PWRDN_EN
;
220 writel_relaxed(enable
, info
->baseaddr
+ pwdrn_reg
);
223 static u32
standbywfi_cpu_mask(u32 cpu
, u32 cluster
)
225 return cluster_is_a15(cluster
) ?
226 STANDBYWFI_STAT_A15_CPU_MASK(cpu
)
227 : STANDBYWFI_STAT_A7_CPU_MASK(cpu
);
231 * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
233 * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
234 * @cluster: mpidr[15:8] bitfield describing cluster affinity level
236 * @return: non-zero if and only if the specified CPU is in WFI
238 * Take care when interpreting the result of this function: a CPU might
239 * be in WFI temporarily due to idle, and is not necessarily safely
242 int ve_spc_cpu_in_wfi(u32 cpu
, u32 cluster
)
245 u32 mask
= standbywfi_cpu_mask(cpu
, cluster
);
247 if (cluster
>= MAX_CLUSTERS
)
250 ret
= readl_relaxed(info
->baseaddr
+ STANDBYWFI_STAT
);
252 pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
253 __func__
, STANDBYWFI_STAT
, ret
, mask
);
258 static int ve_spc_get_performance(int cluster
, u32
*freq
)
260 struct ve_spc_opp
*opps
= info
->opps
[cluster
];
261 u32 perf_cfg_reg
= 0;
264 perf_cfg_reg
= cluster_is_a15(cluster
) ? PERF_LVL_A15
: PERF_LVL_A7
;
266 perf
= readl_relaxed(info
->baseaddr
+ perf_cfg_reg
);
267 if (perf
>= info
->num_opps
[cluster
])
276 /* find closest match to given frequency in OPP table */
277 static int ve_spc_round_performance(int cluster
, u32 freq
)
279 int idx
, max_opp
= info
->num_opps
[cluster
];
280 struct ve_spc_opp
*opps
= info
->opps
[cluster
];
281 u32 fmin
= 0, fmax
= ~0, ftmp
;
283 freq
/= 1000; /* OPP entries in kHz */
284 for (idx
= 0; idx
< max_opp
; idx
++, opps
++) {
300 static int ve_spc_find_performance_index(int cluster
, u32 freq
)
302 int idx
, max_opp
= info
->num_opps
[cluster
];
303 struct ve_spc_opp
*opps
= info
->opps
[cluster
];
305 for (idx
= 0; idx
< max_opp
; idx
++, opps
++)
306 if (opps
->freq
== freq
)
308 return (idx
== max_opp
) ? -EINVAL
: idx
;
311 static int ve_spc_waitforcompletion(int req_type
)
313 int ret
= wait_for_completion_interruptible_timeout(
314 &info
->done
, usecs_to_jiffies(TIMEOUT_US
));
318 ret
= info
->cur_rsp_stat
& STAT_COMPLETE(req_type
) ? 0 : -EIO
;
322 static int ve_spc_set_performance(int cluster
, u32 freq
)
325 int ret
, perf
, req_type
;
327 if (cluster_is_a15(cluster
)) {
328 req_type
= CA15_DVFS
;
329 perf_cfg_reg
= PERF_LVL_A15
;
332 perf_cfg_reg
= PERF_LVL_A7
;
335 perf
= ve_spc_find_performance_index(cluster
, freq
);
340 if (down_timeout(&info
->sem
, usecs_to_jiffies(TIMEOUT_US
)))
343 init_completion(&info
->done
);
344 info
->cur_rsp_mask
= RESPONSE_MASK(req_type
);
346 writel(perf
, info
->baseaddr
+ perf_cfg_reg
);
347 ret
= ve_spc_waitforcompletion(req_type
);
349 info
->cur_rsp_mask
= 0;
355 static int ve_spc_read_sys_cfg(int func
, int offset
, uint32_t *data
)
359 if (down_timeout(&info
->sem
, usecs_to_jiffies(TIMEOUT_US
)))
362 init_completion(&info
->done
);
363 info
->cur_rsp_mask
= RESPONSE_MASK(SPC_SYS_CFG
);
365 /* Set the control value */
366 writel(SYSCFG_START
| func
| offset
>> 2, info
->baseaddr
+ COMMS
);
367 ret
= ve_spc_waitforcompletion(SPC_SYS_CFG
);
370 *data
= readl(info
->baseaddr
+ SYSCFG_RDATA
);
372 info
->cur_rsp_mask
= 0;
378 static irqreturn_t
ve_spc_irq_handler(int irq
, void *data
)
380 struct ve_spc_drvdata
*drv_data
= data
;
381 uint32_t status
= readl_relaxed(drv_data
->baseaddr
+ PWC_STATUS
);
383 if (info
->cur_rsp_mask
& status
) {
384 info
->cur_rsp_stat
= status
;
385 complete(&drv_data
->done
);
392 * +--------------------------+
394 * +--------------------------+
395 * | m_volt | freq(kHz) |
396 * +--------------------------+
398 #define MULT_FACTOR 20
399 #define VOLT_SHIFT 20
400 #define FREQ_MASK (0xFFFFF)
401 static int ve_spc_populate_opps(uint32_t cluster
)
403 uint32_t data
= 0, off
, ret
, idx
;
404 struct ve_spc_opp
*opps
;
406 opps
= kzalloc(sizeof(*opps
) * MAX_OPPS
, GFP_KERNEL
);
410 info
->opps
[cluster
] = opps
;
412 off
= cluster_is_a15(cluster
) ? A15_PERFVAL_BASE
: A7_PERFVAL_BASE
;
413 for (idx
= 0; idx
< MAX_OPPS
; idx
++, off
+= 4, opps
++) {
414 ret
= ve_spc_read_sys_cfg(SYSCFG_SCC
, off
, &data
);
416 opps
->freq
= (data
& FREQ_MASK
) * MULT_FACTOR
;
417 opps
->u_volt
= (data
>> VOLT_SHIFT
) * 1000;
422 info
->num_opps
[cluster
] = idx
;
427 static int ve_init_opp_table(struct device
*cpu_dev
)
430 int idx
, ret
= 0, max_opp
;
431 struct ve_spc_opp
*opps
;
433 cluster
= topology_physical_package_id(cpu_dev
->id
);
434 cluster
= cluster
< 0 ? 0 : cluster
;
436 max_opp
= info
->num_opps
[cluster
];
437 opps
= info
->opps
[cluster
];
439 for (idx
= 0; idx
< max_opp
; idx
++, opps
++) {
440 ret
= dev_pm_opp_add(cpu_dev
, opps
->freq
* 1000, opps
->u_volt
);
442 dev_warn(cpu_dev
, "failed to add opp %lu %lu\n",
443 opps
->freq
, opps
->u_volt
);
450 int __init
ve_spc_init(void __iomem
*baseaddr
, u32 a15_clusid
, int irq
)
453 info
= kzalloc(sizeof(*info
), GFP_KERNEL
);
457 info
->baseaddr
= baseaddr
;
458 info
->a15_clusid
= a15_clusid
;
461 pr_err(SPCLOG
"Invalid IRQ %d\n", irq
);
466 init_completion(&info
->done
);
468 readl_relaxed(info
->baseaddr
+ PWC_STATUS
);
470 ret
= request_irq(irq
, ve_spc_irq_handler
, IRQF_TRIGGER_HIGH
471 | IRQF_ONESHOT
, "vexpress-spc", info
);
473 pr_err(SPCLOG
"IRQ %d request failed\n", irq
);
478 sema_init(&info
->sem
, 1);
480 * Multi-cluster systems may need this data when non-coherent, during
481 * cluster power-up/power-down. Make sure driver info reaches main
495 #define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
496 static unsigned long spc_recalc_rate(struct clk_hw
*hw
,
497 unsigned long parent_rate
)
499 struct clk_spc
*spc
= to_clk_spc(hw
);
502 if (ve_spc_get_performance(spc
->cluster
, &freq
))
508 static long spc_round_rate(struct clk_hw
*hw
, unsigned long drate
,
509 unsigned long *parent_rate
)
511 struct clk_spc
*spc
= to_clk_spc(hw
);
513 return ve_spc_round_performance(spc
->cluster
, drate
);
516 static int spc_set_rate(struct clk_hw
*hw
, unsigned long rate
,
517 unsigned long parent_rate
)
519 struct clk_spc
*spc
= to_clk_spc(hw
);
521 return ve_spc_set_performance(spc
->cluster
, rate
/ 1000);
524 static struct clk_ops clk_spc_ops
= {
525 .recalc_rate
= spc_recalc_rate
,
526 .round_rate
= spc_round_rate
,
527 .set_rate
= spc_set_rate
,
530 static struct clk
*ve_spc_clk_register(struct device
*cpu_dev
)
532 struct clk_init_data init
;
535 spc
= kzalloc(sizeof(*spc
), GFP_KERNEL
);
537 return ERR_PTR(-ENOMEM
);
539 spc
->hw
.init
= &init
;
540 spc
->cluster
= topology_physical_package_id(cpu_dev
->id
);
542 spc
->cluster
= spc
->cluster
< 0 ? 0 : spc
->cluster
;
544 init
.name
= dev_name(cpu_dev
);
545 init
.ops
= &clk_spc_ops
;
546 init
.flags
= CLK_GET_RATE_NOCACHE
;
547 init
.num_parents
= 0;
549 return devm_clk_register(cpu_dev
, &spc
->hw
);
552 static int __init
ve_spc_clk_init(void)
558 return 0; /* Continue only if SPC is initialised */
560 if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
561 pr_err("failed to build OPP table\n");
565 for_each_possible_cpu(cpu
) {
566 struct device
*cpu_dev
= get_cpu_device(cpu
);
568 pr_warn("failed to get cpu%d device\n", cpu
);
571 clk
= ve_spc_clk_register(cpu_dev
);
573 pr_warn("failed to register cpu%d clock\n", cpu
);
576 if (clk_register_clkdev(clk
, NULL
, dev_name(cpu_dev
))) {
577 pr_warn("failed to register cpu%d clock lookup\n", cpu
);
581 if (ve_init_opp_table(cpu_dev
))
582 pr_warn("failed to initialise cpu%d opp table\n", cpu
);
585 platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL
, 0);
588 device_initcall(ve_spc_clk_init
);