arch/blackfin/mach-bf537/boards/minotaur.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *           2008-2009 Cambridge Signal Processing
   4  *                2005 National ICT Australia (NICTA)
   5  *                      Aidan Williams <aidan@nicta.com.au>
   6  *
   7  * Licensed under the GPL-2 or later.
   8  */
   9
  10 #include <linux/device.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
  17 #include <linux/usb/isp1362.h>
  18 #endif
  19 #include <linux/ata_platform.h>
  20 #include <linux/irq.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/usb/sl811.h>
  23 #include <asm/dma.h>
  24 #include <asm/bfin5xx_spi.h>
  25 #include <asm/reboot.h>
  26 #include <asm/portmux.h>
  27 #include <linux/spi/ad7877.h>
  28
  29 /*
  30  * Name the Board for the /proc/cpuinfo
  31  */
  32 const char bfin_board_name[] = "CamSig Minotaur BF537";
  33
  34 #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
  35 static struct resource bfin_pcmcia_cf_resources[] = {
  36         {
  37                 .start = 0x20310000, /* IO PORT */
  38                 .end = 0x20312000,
  39                 .flags = IORESOURCE_MEM,
  40         }, {
  41                 .start = 0x20311000, /* Attribute Memory */
  42                 .end = 0x20311FFF,
  43                 .flags = IORESOURCE_MEM,
  44         }, {
  45                 .start = IRQ_PF4,
  46                 .end = IRQ_PF4,
  47                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  48         }, {
  49                 .start = IRQ_PF6, /* Card Detect PF6 */
  50                 .end = IRQ_PF6,
  51                 .flags = IORESOURCE_IRQ,
  52         },
  53 };
  54
  55 static struct platform_device bfin_pcmcia_cf_device = {
  56         .name = "bfin_cf_pcmcia",
  57         .id = -1,
  58         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
  59         .resource = bfin_pcmcia_cf_resources,
  60 };
  61 #endif
  62
  63 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
  64 static struct platform_device rtc_device = {
  65         .name = "rtc-bfin",
  66         .id   = -1,
  67 };
  68 #endif
  69
  70 #if IS_ENABLED(CONFIG_BFIN_MAC)
  71 #include <linux/bfin_mac.h>
  72 static const unsigned short bfin_mac_peripherals[] = P_MII0;
  73
  74 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
  75         {
  76                 .addr = 1,
  77                 .irq = IRQ_MAC_PHYINT,
  78         },
  79 };
  80
  81 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
  82         .phydev_number = 1,
  83         .phydev_data = bfin_phydev_data,
  84         .phy_mode = PHY_INTERFACE_MODE_MII,
  85         .mac_peripherals = bfin_mac_peripherals,
  86 };
  87
  88 static struct platform_device bfin_mii_bus = {
  89         .name = "bfin_mii_bus",
  90         .dev = {
  91                 .platform_data = &bfin_mii_bus_data,
  92         }
  93 };
  94
  95 static struct platform_device bfin_mac_device = {
  96         .name = "bfin_mac",
  97         .dev = {
  98                 .platform_data = &bfin_mii_bus,
  99         }
 100 };
 101 #endif
 102
 103 #if IS_ENABLED(CONFIG_USB_NET2272)
 104 static struct resource net2272_bfin_resources[] = {
 105         {
 106                 .start = 0x20300000,
 107                 .end = 0x20300000 + 0x100,
 108                 .flags = IORESOURCE_MEM,
 109         }, {
 110                 .start = IRQ_PF7,
 111                 .end = IRQ_PF7,
 112                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 113         },
 114 };
 115
 116 static struct platform_device net2272_bfin_device = {
 117         .name = "net2272",
 118         .id = -1,
 119         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 120         .resource = net2272_bfin_resources,
 121 };
 122 #endif
 123
 124 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 125 /* all SPI peripherals info goes here */
 126
 127 #if IS_ENABLED(CONFIG_MTD_M25P80)
 128
 129 /* Partition sizes */
 130 #define FLASH_SIZE       0x00400000
 131 #define PSIZE_UBOOT      0x00030000
 132 #define PSIZE_INITRAMFS  0x00240000
 133
 134 static struct mtd_partition bfin_spi_flash_partitions[] = {
 135         {
 136                 .name       = "bootloader(spi)",
 137                 .size       = PSIZE_UBOOT,
 138                 .offset     = 0x000000,
 139                 .mask_flags = MTD_CAP_ROM
 140         }, {
 141                 .name       = "initramfs(spi)",
 142                 .size       = PSIZE_INITRAMFS,
 143                 .offset     = PSIZE_UBOOT
 144         }, {
 145                 .name       = "opt(spi)",
 146                 .size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
 147                 .offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
 148         }
 149 };
 150
 151 static struct flash_platform_data bfin_spi_flash_data = {
 152         .name = "m25p80",
 153         .parts = bfin_spi_flash_partitions,
 154         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 155         .type = "m25p64",
 156 };
 157
 158 /* SPI flash chip (m25p64) */
 159 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 160         .enable_dma = 0,         /* use dma transfer with this chip*/
 161 };
 162 #endif
 163
 164 #if IS_ENABLED(CONFIG_MMC_SPI)
 165 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 166         .enable_dma = 0,
 167 };
 168 #endif
 169
 170 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 171 #if IS_ENABLED(CONFIG_MTD_M25P80)
 172         {
 173                 /* the modalias must be the same as spi device driver name */
 174                 .modalias = "m25p80", /* Name of spi_driver for this device */
 175                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 176                 .bus_num = 0, /* Framework bus number */
 177                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 178                 .platform_data = &bfin_spi_flash_data,
 179                 .controller_data = &spi_flash_chip_info,
 180                 .mode = SPI_MODE_3,
 181         },
 182 #endif
 183
 184 #if IS_ENABLED(CONFIG_MMC_SPI)
 185         {
 186                 .modalias = "mmc_spi",
 187                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 188                 .bus_num = 0,
 189                 .chip_select = 5,
 190                 .controller_data = &mmc_spi_chip_info,
 191                 .mode = SPI_MODE_3,
 192         },
 193 #endif
 194 };
 195
 196 /* SPI controller data */
 197 static struct bfin5xx_spi_master bfin_spi0_info = {
 198         .num_chipselect = 8,
 199         .enable_dma = 1,  /* master has the ability to do dma transfer */
 200 };
 201
 202 /* SPI (0) */
 203 static struct resource bfin_spi0_resource[] = {
 204         [0] = {
 205                 .start = SPI0_REGBASE,
 206                 .end   = SPI0_REGBASE + 0xFF,
 207                 .flags = IORESOURCE_MEM,
 208                 },
 209         [1] = {
 210                 .start = CH_SPI,
 211                 .end   = CH_SPI,
 212                 .flags = IORESOURCE_DMA,
 213         },
 214         [2] = {
 215                 .start = IRQ_SPI,
 216                 .end   = IRQ_SPI,
 217                 .flags = IORESOURCE_IRQ,
 218         },
 219 };
 220
 221 static struct platform_device bfin_spi0_device = {
 222         .name = "bfin-spi",
 223         .id = 0, /* Bus number */
 224         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 225         .resource = bfin_spi0_resource,
 226         .dev = {
 227                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 228         },
 229 };
 230 #endif  /* spi master and devices */
 231
 232 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
 233 #ifdef CONFIG_SERIAL_BFIN_UART0
 234 static struct resource bfin_uart0_resources[] = {
 235         {
 236                 .start = UART0_THR,
 237                 .end = UART0_GCTL+2,
 238                 .flags = IORESOURCE_MEM,
 239         },
 240         {
 241                 .start = IRQ_UART0_TX,
 242                 .end = IRQ_UART0_TX,
 243                 .flags = IORESOURCE_IRQ,
 244         },
 245         {
 246                 .start = IRQ_UART0_RX,
 247                 .end = IRQ_UART0_RX,
 248                 .flags = IORESOURCE_IRQ,
 249         },
 250         {
 251                 .start = IRQ_UART0_ERROR,
 252                 .end = IRQ_UART0_ERROR,
 253                 .flags = IORESOURCE_IRQ,
 254         },
 255         {
 256                 .start = CH_UART0_TX,
 257                 .end = CH_UART0_TX,
 258                 .flags = IORESOURCE_DMA,
 259         },
 260         {
 261                 .start = CH_UART0_RX,
 262                 .end = CH_UART0_RX,
 263                 .flags = IORESOURCE_DMA,
 264         },
 265 };
 266
 267 static unsigned short bfin_uart0_peripherals[] = {
 268         P_UART0_TX, P_UART0_RX, 0
 269 };
 270
 271 static struct platform_device bfin_uart0_device = {
 272         .name = "bfin-uart",
 273         .id = 0,
 274         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 275         .resource = bfin_uart0_resources,
 276         .dev = {
 277                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 278         },
 279 };
 280 #endif
 281 #ifdef CONFIG_SERIAL_BFIN_UART1
 282 static struct resource bfin_uart1_resources[] = {
 283         {
 284                 .start = UART1_THR,
 285                 .end = UART1_GCTL+2,
 286                 .flags = IORESOURCE_MEM,
 287         },
 288         {
 289                 .start = IRQ_UART1_TX,
 290                 .end = IRQ_UART1_TX,
 291                 .flags = IORESOURCE_IRQ,
 292         },
 293         {
 294                 .start = IRQ_UART1_RX,
 295                 .end = IRQ_UART1_RX,
 296                 .flags = IORESOURCE_IRQ,
 297         },
 298         {
 299                 .start = IRQ_UART1_ERROR,
 300                 .end = IRQ_UART1_ERROR,
 301                 .flags = IORESOURCE_IRQ,
 302         },
 303         {
 304                 .start = CH_UART1_TX,
 305                 .end = CH_UART1_TX,
 306                 .flags = IORESOURCE_DMA,
 307         },
 308         {
 309                 .start = CH_UART1_RX,
 310                 .end = CH_UART1_RX,
 311                 .flags = IORESOURCE_DMA,
 312         },
 313 };
 314
 315 static unsigned short bfin_uart1_peripherals[] = {
 316         P_UART1_TX, P_UART1_RX, 0
 317 };
 318
 319 static struct platform_device bfin_uart1_device = {
 320         .name = "bfin-uart",
 321         .id = 1,
 322         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 323         .resource = bfin_uart1_resources,
 324         .dev = {
 325                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 326         },
 327 };
 328 #endif
 329 #endif
 330
 331 #if IS_ENABLED(CONFIG_BFIN_SIR)
 332 #ifdef CONFIG_BFIN_SIR0
 333 static struct resource bfin_sir0_resources[] = {
 334         {
 335                 .start = 0xFFC00400,
 336                 .end = 0xFFC004FF,
 337                 .flags = IORESOURCE_MEM,
 338         },
 339         {
 340                 .start = IRQ_UART0_RX,
 341                 .end = IRQ_UART0_RX+1,
 342                 .flags = IORESOURCE_IRQ,
 343         },
 344         {
 345                 .start = CH_UART0_RX,
 346                 .end = CH_UART0_RX+1,
 347                 .flags = IORESOURCE_DMA,
 348         },
 349 };
 350
 351 static struct platform_device bfin_sir0_device = {
 352         .name = "bfin_sir",
 353         .id = 0,
 354         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 355         .resource = bfin_sir0_resources,
 356 };
 357 #endif
 358 #ifdef CONFIG_BFIN_SIR1
 359 static struct resource bfin_sir1_resources[] = {
 360         {
 361                 .start = 0xFFC02000,
 362                 .end = 0xFFC020FF,
 363                 .flags = IORESOURCE_MEM,
 364         },
 365         {
 366                 .start = IRQ_UART1_RX,
 367                 .end = IRQ_UART1_RX+1,
 368                 .flags = IORESOURCE_IRQ,
 369         },
 370         {
 371                 .start = CH_UART1_RX,
 372                 .end = CH_UART1_RX+1,
 373                 .flags = IORESOURCE_DMA,
 374         },
 375 };
 376
 377 static struct platform_device bfin_sir1_device = {
 378         .name = "bfin_sir",
 379         .id = 1,
 380         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 381         .resource = bfin_sir1_resources,
 382 };
 383 #endif
 384 #endif
 385
 386 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 387 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
 388
 389 static struct resource bfin_twi0_resource[] = {
 390         [0] = {
 391                 .start = TWI0_REGBASE,
 392                 .end   = TWI0_REGBASE + 0xFF,
 393                 .flags = IORESOURCE_MEM,
 394         },
 395         [1] = {
 396                 .start = IRQ_TWI,
 397                 .end   = IRQ_TWI,
 398                 .flags = IORESOURCE_IRQ,
 399         },
 400 };
 401
 402 static struct platform_device i2c_bfin_twi_device = {
 403         .name = "i2c-bfin-twi",
 404         .id = 0,
 405         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 406         .resource = bfin_twi0_resource,
 407         .dev = {
 408                 .platform_data = &bfin_twi0_pins,
 409         },
 410 };
 411 #endif
 412
 413 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 414 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 415 static struct resource bfin_sport0_uart_resources[] = {
 416         {
 417                 .start = SPORT0_TCR1,
 418                 .end = SPORT0_MRCS3+4,
 419                 .flags = IORESOURCE_MEM,
 420         },
 421         {
 422                 .start = IRQ_SPORT0_RX,
 423                 .end = IRQ_SPORT0_RX+1,
 424                 .flags = IORESOURCE_IRQ,
 425         },
 426         {
 427                 .start = IRQ_SPORT0_ERROR,
 428                 .end = IRQ_SPORT0_ERROR,
 429                 .flags = IORESOURCE_IRQ,
 430         },
 431 };
 432
 433 static unsigned short bfin_sport0_peripherals[] = {
 434         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 435         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 436 };
 437
 438 static struct platform_device bfin_sport0_uart_device = {
 439         .name = "bfin-sport-uart",
 440         .id = 0,
 441         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 442         .resource = bfin_sport0_uart_resources,
 443         .dev = {
 444                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 445         },
 446 };
 447 #endif
 448 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 449 static struct resource bfin_sport1_uart_resources[] = {
 450         {
 451                 .start = SPORT1_TCR1,
 452                 .end = SPORT1_MRCS3+4,
 453                 .flags = IORESOURCE_MEM,
 454         },
 455         {
 456                 .start = IRQ_SPORT1_RX,
 457                 .end = IRQ_SPORT1_RX+1,
 458                 .flags = IORESOURCE_IRQ,
 459         },
 460         {
 461                 .start = IRQ_SPORT1_ERROR,
 462                 .end = IRQ_SPORT1_ERROR,
 463                 .flags = IORESOURCE_IRQ,
 464         },
 465 };
 466
 467 static unsigned short bfin_sport1_peripherals[] = {
 468         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 469         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 470 };
 471
 472 static struct platform_device bfin_sport1_uart_device = {
 473         .name = "bfin-sport-uart",
 474         .id = 1,
 475         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 476         .resource = bfin_sport1_uart_resources,
 477         .dev = {
 478                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 479         },
 480 };
 481 #endif
 482 #endif
 483
 484 static struct platform_device *minotaur_devices[] __initdata = {
 485 #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 486         &bfin_pcmcia_cf_device,
 487 #endif
 488
 489 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 490         &rtc_device,
 491 #endif
 492
 493 #if IS_ENABLED(CONFIG_BFIN_MAC)
 494         &bfin_mii_bus,
 495         &bfin_mac_device,
 496 #endif
 497
 498 #if IS_ENABLED(CONFIG_USB_NET2272)
 499         &net2272_bfin_device,
 500 #endif
 501
 502 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 503         &bfin_spi0_device,
 504 #endif
 505
 506 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
 507 #ifdef CONFIG_SERIAL_BFIN_UART0
 508         &bfin_uart0_device,
 509 #endif
 510 #ifdef CONFIG_SERIAL_BFIN_UART1
 511         &bfin_uart1_device,
 512 #endif
 513 #endif
 514
 515 #if IS_ENABLED(CONFIG_BFIN_SIR)
 516 #ifdef CONFIG_BFIN_SIR0
 517         &bfin_sir0_device,
 518 #endif
 519 #ifdef CONFIG_BFIN_SIR1
 520         &bfin_sir1_device,
 521 #endif
 522 #endif
 523
 524 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 525         &i2c_bfin_twi_device,
 526 #endif
 527
 528 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 529 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 530         &bfin_sport0_uart_device,
 531 #endif
 532 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 533         &bfin_sport1_uart_device,
 534 #endif
 535 #endif
 536
 537 };
 538
 539 static int __init minotaur_init(void)
 540 {
 541         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 542         platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
 543 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 544         spi_register_board_info(bfin_spi_board_info,
 545                                 ARRAY_SIZE(bfin_spi_board_info));
 546 #endif
 547
 548         return 0;
 549 }
 550
 551 arch_initcall(minotaur_init);
 552
 553 static struct platform_device *minotaur_early_devices[] __initdata = {
 554 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
 555 #ifdef CONFIG_SERIAL_BFIN_UART0
 556         &bfin_uart0_device,
 557 #endif
 558 #ifdef CONFIG_SERIAL_BFIN_UART1
 559         &bfin_uart1_device,
 560 #endif
 561 #endif
 562
 563 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
 564 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 565         &bfin_sport0_uart_device,
 566 #endif
 567 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 568         &bfin_sport1_uart_device,
 569 #endif
 570 #endif
 571 };
 572
 573 void __init native_machine_early_platform_add_devices(void)
 574 {
 575         printk(KERN_INFO "register early platform devices\n");
 576         early_platform_add_devices(minotaur_early_devices,
 577                 ARRAY_SIZE(minotaur_early_devices));
 578 }
 579
 580 void native_machine_restart(char *cmd)
 581 {
 582         /* workaround reboot hang when booting from SPI */
 583         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 584                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 585 }