Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / arch / mips / include / asm / mach-pmcs-msp71xx / msp_usb.h
blobfe1566f2913e6abe447aff4a9e8d996413cf78ea
1 /******************************************************************
2 * Copyright (c) 2000-2007 PMC-Sierra INC.
4 * This program is free software; you can redistribute it
5 * and/or modify it under the terms of the GNU General
6 * Public License as published by the Free Software
7 * Foundation; either version 2 of the License, or (at your
8 * option) any later version.
10 * This program is distributed in the hope that it will be
11 * useful, but WITHOUT ANY WARRANTY; without even the implied
12 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
13 * PURPOSE. See the GNU General Public License for more
14 * details.
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
19 * 02139, USA.
21 * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
22 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
23 * SOFTWARE.
25 #ifndef MSP_USB_H_
26 #define MSP_USB_H_
28 #define NUM_USB_DEVS 1
30 /* Register spaces for USB host 0 */
31 #define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
32 #define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
33 #define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
34 #define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
35 #define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
36 #define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
38 /* Register spaces for USB host 1 */
39 #define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
40 #define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
41 #define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
42 #define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
43 #define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
44 #define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
46 /* USB Identification registers */
47 struct msp_usbid_regs {
48 u32 id; /* 0x0: Identification register */
49 u32 hwgen; /* 0x4: General HW params */
50 u32 hwhost; /* 0x8: Host HW params */
51 u32 hwdev; /* 0xc: Device HW params */
52 u32 hwtxbuf; /* 0x10: Tx buffer HW params */
53 u32 hwrxbuf; /* 0x14: Rx buffer HW params */
54 u32 reserved[26];
55 u32 timer0_load; /* 0x80: General-purpose timer 0 load*/
56 u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */
57 u32 timer1_load; /* 0x88: General-purpose timer 1 load*/
58 u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */
61 /* MSBus to AMBA registers */
62 struct msp_mab_regs {
63 u32 isr; /* 0x0: Interrupt status */
64 u32 imr; /* 0x4: Interrupt mask */
65 u32 thcr0; /* 0x8: Transaction header capture 0 */
66 u32 thcr1; /* 0xc: Transaction header capture 1 */
67 u32 int_stat; /* 0x10: Interrupt status summary */
68 u32 phy_cfg; /* 0x14: USB phy config */
71 /* EHCI registers */
72 struct msp_usbhs_regs {
73 u32 hciver; /* 0x0: Version and offset to operational regs */
74 u32 hcsparams; /* 0x4: Host control structural parameters */
75 u32 hccparams; /* 0x8: Host control capability parameters */
76 u32 reserved0[5];
77 u32 dciver; /* 0x20: Device interface version */
78 u32 dccparams; /* 0x24: Device control capability parameters */
79 u32 reserved1[6];
80 u32 cmd; /* 0x40: USB command */
81 u32 sts; /* 0x44: USB status */
82 u32 int_ena; /* 0x48: USB interrupt enable */
83 u32 frindex; /* 0x4c: Frame index */
84 u32 reserved3;
85 union {
86 struct {
87 u32 flb_addr; /* 0x54: Frame list base address */
88 u32 next_async_addr; /* 0x58: next asynchronous addr */
89 u32 ttctrl; /* 0x5c: embedded transaction translator
90 async buffer status */
91 u32 burst_size; /* 0x60: Controller burst size */
92 u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */
93 u32 reserved0[4];
94 u32 endpt_nak; /* 0x78: Endpoint NAK */
95 u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */
96 u32 cfg_flag; /* 0x80: Config flag */
97 u32 port_sc1; /* 0x84: Port status & control 1 */
98 u32 reserved1[7];
99 u32 otgsc; /* 0xa4: OTG status & control */
100 u32 mode; /* 0xa8: USB controller mode */
101 } host;
103 struct {
104 u32 dev_addr; /* 0x54: Device address */
105 u32 endpt_list_addr; /* 0x58: Endpoint list address */
106 u32 reserved0[7];
107 u32 endpt_nak; /* 0x74 */
108 u32 endpt_nak_ctrl; /* 0x78 */
109 u32 cfg_flag; /* 0x80 */
110 u32 port_sc1; /* 0x84: Port status & control 1 */
111 u32 reserved[7];
112 u32 otgsc; /* 0xa4: OTG status & control */
113 u32 mode; /* 0xa8: USB controller mode */
114 u32 endpt_setup_stat; /* 0xac */
115 u32 endpt_prime; /* 0xb0 */
116 u32 endpt_flush; /* 0xb4 */
117 u32 endpt_stat; /* 0xb8 */
118 u32 endpt_complete; /* 0xbc */
119 u32 endpt_ctrl0; /* 0xc0 */
120 u32 endpt_ctrl1; /* 0xc4 */
121 u32 endpt_ctrl2; /* 0xc8 */
122 u32 endpt_ctrl3; /* 0xcc */
123 } device;
124 } u;
127 * Container for the more-generic platform_device.
128 * This exists mainly as a way to map the non-standard register
129 * spaces and make them accessible to the USB ISR.
131 struct mspusb_device {
132 struct msp_mab_regs __iomem *mab_regs;
133 struct msp_usbid_regs __iomem *usbid_regs;
134 struct msp_usbhs_regs __iomem *usbhs_regs;
135 struct platform_device dev;
138 #define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
139 #define TO_HOST_ID(x) ((x) & 0x3)
140 #endif /*MSP_USB_H_*/