arch/powerpc/boot/dts/mpc5125twr.dts

   1 /*
   2  * STx/Freescale ADS5125 MPC5125 silicon
   3  *
   4  * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
   5  *
   6  * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
   7  * Copyright (C) 2013 Sirius Electronic Systems
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 #include <dt-bindings/clock/mpc512x-clock.h>
  16
  17 /dts-v1/;
  18
  19 / {
  20         model = "mpc5125twr"; // In BSP "mpc5125ads"
  21         compatible = "fsl,mpc5125ads", "fsl,mpc5125";
  22         #address-cells = <1>;
  23         #size-cells = <1>;
  24         interrupt-parent = <&ipic>;
  25
  26         aliases {
  27                 gpio0 = &gpio0;
  28                 gpio1 = &gpio1;
  29                 ethernet0 = &eth0;
  30         };
  31
  32         cpus {
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35
  36                 PowerPC,5125@0 {
  37                         device_type = "cpu";
  38                         reg = <0>;
  39                         d-cache-line-size = <0x20>;     // 32 bytes
  40                         i-cache-line-size = <0x20>;     // 32 bytes
  41                         d-cache-size = <0x8000>;        // L1, 32K
  42                         i-cache-size = <0x8000>;        // L1, 32K
  43                         timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
  44                         bus-frequency = <198000000>;    // 198 MHz csb bus
  45                         clock-frequency = <396000000>;  // 396 MHz ppc core
  46                 };
  47         };
  48
  49         memory {
  50                 device_type = "memory";
  51                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  52         };
  53
  54         sram@30000000 {
  55                 compatible = "fsl,mpc5121-sram";
  56                 reg = <0x30000000 0x08000>;             // 32K at 0x30000000
  57         };
  58
  59         clocks {
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 osc: osc {
  64                         compatible = "fixed-clock";
  65                         #clock-cells = <0>;
  66                         clock-frequency = <33000000>;
  67                 };
  68         };
  69
  70         soc@80000000 {
  71                 compatible = "fsl,mpc5121-immr";
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 ranges = <0x0 0x80000000 0x400000>;
  75                 reg = <0x80000000 0x400000>;
  76                 bus-frequency = <66000000>;     // 66 MHz ips bus
  77
  78                 // IPIC
  79                 // interrupts cell = <intr #, sense>
  80                 // sense values match linux IORESOURCE_IRQ_* defines:
  81                 // sense == 8: Level, low assertion
  82                 // sense == 2: Edge, high-to-low change
  83                 //
  84                 ipic: interrupt-controller@c00 {
  85                         compatible = "fsl,mpc5121-ipic", "fsl,ipic";
  86                         interrupt-controller;
  87                         #address-cells = <0>;
  88                         #interrupt-cells = <2>;
  89                         reg = <0xc00 0x100>;
  90                 };
  91
  92                 rtc@a00 {       // Real time clock
  93                         compatible = "fsl,mpc5121-rtc";
  94                         reg = <0xa00 0x100>;
  95                         interrupts = <79 0x8 80 0x8>;
  96                 };
  97
  98                 reset@e00 {     // Reset module
  99                         compatible = "fsl,mpc5125-reset";
 100                         reg = <0xe00 0x100>;
 101                 };
 102
 103                 clks: clock@f00 {       // Clock control
 104                         compatible = "fsl,mpc5121-clock";
 105                         reg = <0xf00 0x100>;
 106                         #clock-cells = <1>;
 107                         clocks = <&osc>;
 108                         clock-names = "osc";
 109                 };
 110
 111                 pmc@1000{  // Power Management Controller
 112                         compatible = "fsl,mpc5121-pmc";
 113                         reg = <0x1000 0x100>;
 114                         interrupts = <83 0x2>;
 115                 };
 116
 117                 gpio0: gpio@1100 {
 118                         compatible = "fsl,mpc5125-gpio";
 119                         reg = <0x1100 0x080>;
 120                         interrupts = <78 0x8>;
 121                 };
 122
 123                 gpio1: gpio@1180 {
 124                         compatible = "fsl,mpc5125-gpio";
 125                         reg = <0x1180 0x080>;
 126                         interrupts = <86 0x8>;
 127                 };
 128
 129                 can@1300 { // CAN rev.2
 130                         compatible = "fsl,mpc5121-mscan";
 131                         interrupts = <12 0x8>;
 132                         reg = <0x1300 0x80>;
 133                         clocks = <&clks MPC512x_CLK_BDLC>,
 134                                  <&clks MPC512x_CLK_IPS>,
 135                                  <&clks MPC512x_CLK_SYS>,
 136                                  <&clks MPC512x_CLK_REF>,
 137                                  <&clks MPC512x_CLK_MSCAN0_MCLK>;
 138                         clock-names = "ipg", "ips", "sys", "ref", "mclk";
 139                 };
 140
 141                 can@1380 {
 142                         compatible = "fsl,mpc5121-mscan";
 143                         interrupts = <13 0x8>;
 144                         reg = <0x1380 0x80>;
 145                         clocks = <&clks MPC512x_CLK_BDLC>,
 146                                  <&clks MPC512x_CLK_IPS>,
 147                                  <&clks MPC512x_CLK_SYS>,
 148                                  <&clks MPC512x_CLK_REF>,
 149                                  <&clks MPC512x_CLK_MSCAN1_MCLK>;
 150                         clock-names = "ipg", "ips", "sys", "ref", "mclk";
 151                 };
 152
 153                 sdhc@1500 {
 154                         compatible = "fsl,mpc5121-sdhc";
 155                         interrupts = <8 0x8>;
 156                         reg = <0x1500 0x100>;
 157                         clocks = <&clks MPC512x_CLK_IPS>,
 158                                  <&clks MPC512x_CLK_SDHC>;
 159                         clock-names = "ipg", "per";
 160                 };
 161
 162                 i2c@1700 {
 163                         #address-cells = <1>;
 164                         #size-cells = <0>;
 165                         compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 166                         reg = <0x1700 0x20>;
 167                         interrupts = <0x9 0x8>;
 168                         clocks = <&clks MPC512x_CLK_I2C>;
 169                         clock-names = "ipg";
 170                 };
 171
 172                 i2c@1720 {
 173                         #address-cells = <1>;
 174                         #size-cells = <0>;
 175                         compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 176                         reg = <0x1720 0x20>;
 177                         interrupts = <0xa 0x8>;
 178                         clocks = <&clks MPC512x_CLK_I2C>;
 179                         clock-names = "ipg";
 180                 };
 181
 182                 i2c@1740 {
 183                         #address-cells = <1>;
 184                         #size-cells = <0>;
 185                         compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 186                         reg = <0x1740 0x20>;
 187                         interrupts = <0xb 0x8>;
 188                         clocks = <&clks MPC512x_CLK_I2C>;
 189                         clock-names = "ipg";
 190                 };
 191
 192                 i2ccontrol@1760 {
 193                         compatible = "fsl,mpc5121-i2c-ctrl";
 194                         reg = <0x1760 0x8>;
 195                 };
 196
 197                 diu@2100 {
 198                         compatible = "fsl,mpc5121-diu";
 199                         reg = <0x2100 0x100>;
 200                         interrupts = <64 0x8>;
 201                         clocks = <&clks MPC512x_CLK_DIU>;
 202                         clock-names = "ipg";
 203                 };
 204
 205                 mdio@2800 {
 206                         compatible = "fsl,mpc5121-fec-mdio";
 207                         reg = <0x2800 0x800>;
 208                         #address-cells = <1>;
 209                         #size-cells = <0>;
 210                         phy0: ethernet-phy@0 {
 211                                 reg = <1>;
 212                         };
 213                 };
 214
 215                 eth0: ethernet@2800 {
 216                         compatible = "fsl,mpc5125-fec";
 217                         reg = <0x2800 0x800>;
 218                         local-mac-address = [ 00 00 00 00 00 00 ];
 219                         interrupts = <4 0x8>;
 220                         phy-handle = < &phy0 >;
 221                         phy-connection-type = "rmii";
 222                         clocks = <&clks MPC512x_CLK_FEC>;
 223                         clock-names = "per";
 224                 };
 225
 226                 // IO control
 227                 ioctl@a000 {
 228                         compatible = "fsl,mpc5125-ioctl";
 229                         reg = <0xA000 0x1000>;
 230                 };
 231
 232                 // disable USB1 port
 233                 // TODO:
 234                 // correct pinmux config and fix USB3320 ulpi dependency
 235                 // before re-enabling it
 236                 usb@3000 {
 237                         compatible = "fsl,mpc5121-usb2-dr";
 238                         reg = <0x3000 0x400>;
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                         interrupts = <43 0x8>;
 242                         dr_mode = "host";
 243                         phy_type = "ulpi";
 244                         clocks = <&clks MPC512x_CLK_USB1>;
 245                         clock-names = "ipg";
 246                         status = "disabled";
 247                 };
 248
 249                 sclpc@10100 {
 250                         compatible = "fsl,mpc512x-lpbfifo";
 251                         reg = <0x10100 0x50>;
 252                         interrupts = <7 0x8>;
 253                         dmas = <&dma0 26>;
 254                         dma-names = "rx-tx";
 255                 };
 256
 257                 // 5125 PSCs are not 52xx or 5121 PSC compatible
 258                 // PSC1 uart0 aka ttyPSC0
 259                 serial@11100 {
 260                         compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
 261                         reg = <0x11100 0x100>;
 262                         interrupts = <40 0x8>;
 263                         fsl,rx-fifo-size = <16>;
 264                         fsl,tx-fifo-size = <16>;
 265                         clocks = <&clks MPC512x_CLK_PSC1>,
 266                                  <&clks MPC512x_CLK_PSC1_MCLK>;
 267                         clock-names = "ipg", "mclk";
 268                 };
 269
 270                 // PSC9 uart1 aka ttyPSC1
 271                 serial@11900 {
 272                         compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
 273                         reg = <0x11900 0x100>;
 274                         interrupts = <40 0x8>;
 275                         fsl,rx-fifo-size = <16>;
 276                         fsl,tx-fifo-size = <16>;
 277                         clocks = <&clks MPC512x_CLK_PSC9>,
 278                                  <&clks MPC512x_CLK_PSC9_MCLK>;
 279                         clock-names = "ipg", "mclk";
 280                 };
 281
 282                 pscfifo@11f00 {
 283                         compatible = "fsl,mpc5121-psc-fifo";
 284                         reg = <0x11f00 0x100>;
 285                         interrupts = <40 0x8>;
 286                         clocks = <&clks MPC512x_CLK_PSC_FIFO>;
 287                         clock-names = "ipg";
 288                 };
 289
 290                 dma0: dma@14000 {
 291                         compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
 292                         reg = <0x14000 0x1800>;
 293                         interrupts = <65 0x8>;
 294                         #dma-cells = <1>;
 295                 };
 296         };
 297 };