1 // SPDX-License-Identifier: GPL-2.0
5 * djhr: Hacked out of irq.c into a CPU dependent version.
7 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
8 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
9 * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
10 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
13 #include <linux/slab.h>
14 #include <linux/sched/debug.h>
16 #include <asm/timer.h>
17 #include <asm/traps.h>
18 #include <asm/pgalloc.h>
19 #include <asm/pgtable.h>
22 #include <asm/cacheflush.h>
27 /* Sample sun4m IRQ layout:
31 * 0x26 - Lance ethernet
35 * 0x33 - Parallel port, SBUS level 1
38 * 0x39 - Audio, Graphics card, SBUS level 4
42 * Each interrupt source has a mask bit in the interrupt registers.
43 * When the mask bit is set, this blocks interrupt deliver. So you
44 * clear the bit to enable the interrupt.
46 * Interrupts numbered less than 0x10 are software triggered interrupts
47 * and unused by Linux.
49 * Interrupt level assignment on sun4m:
52 * ------------------------------------------------------------
54 * 2 softint-2, VME/SBUS level 1
55 * 3 softint-3, VME/SBUS level 2
56 * 4 softint-4, onboard SCSI
57 * 5 softint-5, VME/SBUS level 3
58 * 6 softint-6, onboard ETHERNET
59 * 7 softint-7, VME/SBUS level 4
60 * 8 softint-8, onboard VIDEO
61 * 9 softint-9, VME/SBUS level 5, Module Interrupt
62 * 10 softint-10, system counter/timer
63 * 11 softint-11, VME/SBUS level 6, Floppy
64 * 12 softint-12, Keyboard/Mouse, Serial
65 * 13 softint-13, VME/SBUS level 7, ISDN Audio
66 * 14 softint-14, per-processor counter/timer
67 * 15 softint-15, Asynchronous Errors (broadcast)
69 * Each interrupt source is masked distinctly in the sun4m interrupt
70 * registers. The PIL level alone is therefore ambiguous, since multiple
71 * interrupt sources map to a single PIL.
73 * This ambiguity is resolved in the 'intr' property for device nodes
74 * in the OF device tree. Each 'intr' property entry is composed of
75 * two 32-bit words. The first word is the IRQ priority value, which
76 * is what we're intersted in. The second word is the IRQ vector, which
79 * The low 4 bits of the IRQ priority indicate the PIL, and the upper
80 * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
81 * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
83 * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
84 * whereas a value of 0x33 is SBUS level 2. Here are some sample
85 * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
86 * Tadpole S3 GX systems.
88 * esp: 0x24 onboard ESP SCSI
89 * le: 0x26 onboard Lance ETHERNET
90 * p9100: 0x32 SBUS level 1 P9100 video
91 * bpp: 0x33 SBUS level 2 BPP parallel port device
92 * DBRI: 0x39 SBUS level 5 DBRI ISDN audio
93 * SUNW,leo: 0x39 SBUS level 5 LEO video
94 * pcmcia: 0x3b SBUS level 6 PCMCIA controller
95 * uctrl: 0x3b SBUS level 6 UCTRL device
96 * modem: 0x3d SBUS level 7 MODEM
97 * zs: 0x2c onboard keyboard/mouse/serial
98 * floppy: 0x2b onboard Floppy
99 * power: 0x22 onboard power device (XXX unknown mask bit XXX)
103 /* Code in entry.S needs to get at these register mappings. */
104 struct sun4m_irq_percpu __iomem
*sun4m_irq_percpu
[SUN4M_NCPUS
];
105 struct sun4m_irq_global __iomem
*sun4m_irq_global
;
107 struct sun4m_handler_data
{
112 /* Dave Redman (djhr@tadpole.co.uk)
113 * The sun4m interrupt registers.
115 #define SUN4M_INT_ENABLE 0x80000000
116 #define SUN4M_INT_E14 0x00000080
117 #define SUN4M_INT_E10 0x00080000
119 #define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
120 #define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
121 #define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
122 #define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
123 #define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
124 #define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
125 #define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
126 #define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
127 #define SUN4M_INT_REALTIME 0x00080000 /* system timer */
128 #define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
129 #define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
130 #define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
131 #define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
132 #define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
133 #define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
134 #define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
136 #define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
137 SUN4M_INT_M2S_WRITE_ERR | \
138 SUN4M_INT_ECC_ERR | \
141 #define SUN4M_INT_SBUS(x) (1 << (x+7))
142 #define SUN4M_INT_VME(x) (1 << (x))
144 /* Interrupt levels used by OBP */
145 #define OBP_INT_LEVEL_SOFT 0x10
146 #define OBP_INT_LEVEL_ONBOARD 0x20
147 #define OBP_INT_LEVEL_SBUS 0x30
148 #define OBP_INT_LEVEL_VME 0x40
150 #define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
151 #define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14)
153 static unsigned long sun4m_imask
[0x50] = {
155 0, SUN4M_SOFT_INT(1),
156 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
157 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
158 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
159 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
160 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
161 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
162 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
164 0, SUN4M_SOFT_INT(1),
165 SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
166 SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
167 SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
168 SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
169 SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
170 SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
171 SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
174 SUN4M_INT_SCSI
, 0, SUN4M_INT_ETHERNET
, 0,
175 SUN4M_INT_VIDEO
, SUN4M_INT_MODULE
,
176 SUN4M_INT_REALTIME
, SUN4M_INT_FLOPPY
,
177 (SUN4M_INT_SERIAL
| SUN4M_INT_KBDMS
),
178 SUN4M_INT_AUDIO
, SUN4M_INT_E14
, SUN4M_INT_MODULE_ERR
,
180 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
181 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
182 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
183 0, SUN4M_INT_SBUS(6), 0, 0,
185 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
186 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
187 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
188 0, SUN4M_INT_VME(6), 0, 0
191 static void sun4m_mask_irq(struct irq_data
*data
)
193 struct sun4m_handler_data
*handler_data
;
194 int cpu
= smp_processor_id();
196 handler_data
= irq_data_get_irq_handler_data(data
);
197 if (handler_data
->mask
) {
200 local_irq_save(flags
);
201 if (handler_data
->percpu
) {
202 sbus_writel(handler_data
->mask
, &sun4m_irq_percpu
[cpu
]->set
);
204 sbus_writel(handler_data
->mask
, &sun4m_irq_global
->mask_set
);
206 local_irq_restore(flags
);
210 static void sun4m_unmask_irq(struct irq_data
*data
)
212 struct sun4m_handler_data
*handler_data
;
213 int cpu
= smp_processor_id();
215 handler_data
= irq_data_get_irq_handler_data(data
);
216 if (handler_data
->mask
) {
219 local_irq_save(flags
);
220 if (handler_data
->percpu
) {
221 sbus_writel(handler_data
->mask
, &sun4m_irq_percpu
[cpu
]->clear
);
223 sbus_writel(handler_data
->mask
, &sun4m_irq_global
->mask_clear
);
225 local_irq_restore(flags
);
229 static unsigned int sun4m_startup_irq(struct irq_data
*data
)
232 sun4m_unmask_irq(data
);
236 static void sun4m_shutdown_irq(struct irq_data
*data
)
238 sun4m_mask_irq(data
);
239 irq_unlink(data
->irq
);
242 static struct irq_chip sun4m_irq
= {
244 .irq_startup
= sun4m_startup_irq
,
245 .irq_shutdown
= sun4m_shutdown_irq
,
246 .irq_mask
= sun4m_mask_irq
,
247 .irq_unmask
= sun4m_unmask_irq
,
251 static unsigned int sun4m_build_device_irq(struct platform_device
*op
,
252 unsigned int real_irq
)
254 struct sun4m_handler_data
*handler_data
;
258 if (real_irq
>= OBP_INT_LEVEL_VME
) {
259 prom_printf("Bogus sun4m IRQ %u\n", real_irq
);
262 pil
= (real_irq
& 0xf);
263 irq
= irq_alloc(real_irq
, pil
);
268 handler_data
= irq_get_handler_data(irq
);
269 if (unlikely(handler_data
))
272 handler_data
= kzalloc(sizeof(struct sun4m_handler_data
), GFP_ATOMIC
);
273 if (unlikely(!handler_data
)) {
274 prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
278 handler_data
->mask
= sun4m_imask
[real_irq
];
279 handler_data
->percpu
= real_irq
< OBP_INT_LEVEL_ONBOARD
;
280 irq_set_chip_and_handler_name(irq
, &sun4m_irq
,
281 handle_level_irq
, "level");
282 irq_set_handler_data(irq
, handler_data
);
288 struct sun4m_timer_percpu
{
291 u32 l14_limit_noclear
;
292 u32 user_timer_start_stop
;
295 static struct sun4m_timer_percpu __iomem
*timers_percpu
[SUN4M_NCPUS
];
297 struct sun4m_timer_global
{
300 u32 l10_limit_noclear
;
305 static struct sun4m_timer_global __iomem
*timers_global
;
307 static void sun4m_clear_clock_irq(void)
309 sbus_readl(&timers_global
->l10_limit
);
312 void sun4m_nmi(struct pt_regs
*regs
)
314 unsigned long afsr
, afar
, si
;
316 printk(KERN_ERR
"Aieee: sun4m NMI received!\n");
317 /* XXX HyperSparc hack XXX */
318 __asm__
__volatile__("mov 0x500, %%g1\n\t"
319 "lda [%%g1] 0x4, %0\n\t"
320 "mov 0x600, %%g1\n\t"
321 "lda [%%g1] 0x4, %1\n\t" :
322 "=r" (afsr
), "=r" (afar
));
323 printk(KERN_ERR
"afsr=%08lx afar=%08lx\n", afsr
, afar
);
324 si
= sbus_readl(&sun4m_irq_global
->pending
);
325 printk(KERN_ERR
"si=%08lx\n", si
);
326 if (si
& SUN4M_INT_MODULE_ERR
)
327 printk(KERN_ERR
"Module async error\n");
328 if (si
& SUN4M_INT_M2S_WRITE_ERR
)
329 printk(KERN_ERR
"MBus/SBus async error\n");
330 if (si
& SUN4M_INT_ECC_ERR
)
331 printk(KERN_ERR
"ECC memory error\n");
332 if (si
& SUN4M_INT_VME_ERR
)
333 printk(KERN_ERR
"VME async error\n");
334 printk(KERN_ERR
"you lose buddy boy...\n");
339 void sun4m_unmask_profile_irq(void)
343 local_irq_save(flags
);
344 sbus_writel(sun4m_imask
[SUN4M_PROFILE_IRQ
], &sun4m_irq_global
->mask_clear
);
345 local_irq_restore(flags
);
348 void sun4m_clear_profile_irq(int cpu
)
350 sbus_readl(&timers_percpu
[cpu
]->l14_limit
);
353 static void sun4m_load_profile_irq(int cpu
, unsigned int limit
)
355 unsigned int value
= limit
? timer_value(limit
) : 0;
356 sbus_writel(value
, &timers_percpu
[cpu
]->l14_limit
);
359 static void __init
sun4m_init_timers(void)
361 struct device_node
*dp
= of_find_node_by_name(NULL
, "counter");
362 int i
, err
, len
, num_cpu_timers
;
367 printk(KERN_ERR
"sun4m_init_timers: No 'counter' node.\n");
371 addr
= of_get_property(dp
, "address", &len
);
374 printk(KERN_ERR
"sun4m_init_timers: No 'address' prop.\n");
378 num_cpu_timers
= (len
/ sizeof(u32
)) - 1;
379 for (i
= 0; i
< num_cpu_timers
; i
++) {
380 timers_percpu
[i
] = (void __iomem
*)
381 (unsigned long) addr
[i
];
383 timers_global
= (void __iomem
*)
384 (unsigned long) addr
[num_cpu_timers
];
386 /* Every per-cpu timer works in timer mode */
387 sbus_writel(0x00000000, &timers_global
->timer_config
);
390 sparc_config
.cs_period
= SBUS_CLOCK_RATE
* 2; /* 2 seconds */
391 sparc_config
.features
|= FEAT_L14_ONESHOT
;
393 sparc_config
.cs_period
= SBUS_CLOCK_RATE
/ HZ
; /* 1/HZ sec */
394 sparc_config
.features
|= FEAT_L10_CLOCKEVENT
;
396 sparc_config
.features
|= FEAT_L10_CLOCKSOURCE
;
397 sbus_writel(timer_value(sparc_config
.cs_period
),
398 &timers_global
->l10_limit
);
400 master_l10_counter
= &timers_global
->l10_count
;
402 irq
= sun4m_build_device_irq(NULL
, SUN4M_TIMER_IRQ
);
404 err
= request_irq(irq
, timer_interrupt
, IRQF_TIMER
, "timer", NULL
);
406 printk(KERN_ERR
"sun4m_init_timers: Register IRQ error %d.\n",
411 for (i
= 0; i
< num_cpu_timers
; i
++)
412 sbus_writel(0, &timers_percpu
[i
]->l14_limit
);
413 if (num_cpu_timers
== 4)
414 sbus_writel(SUN4M_INT_E14
, &sun4m_irq_global
->mask_set
);
419 struct tt_entry
*trap_table
= &sparc_ttable
[SP_TRAP_IRQ1
+ (14 - 1)];
421 /* For SMP we use the level 14 ticker, however the bootup code
422 * has copied the firmware's level 14 vector into the boot cpu's
423 * trap table, we must fix this now or we get squashed.
425 local_irq_save(flags
);
426 trap_table
->inst_one
= lvl14_save
[0];
427 trap_table
->inst_two
= lvl14_save
[1];
428 trap_table
->inst_three
= lvl14_save
[2];
429 trap_table
->inst_four
= lvl14_save
[3];
430 local_ops
->cache_all();
431 local_irq_restore(flags
);
436 void __init
sun4m_init_IRQ(void)
438 struct device_node
*dp
= of_find_node_by_name(NULL
, "interrupt");
439 int len
, i
, mid
, num_cpu_iregs
;
443 printk(KERN_ERR
"sun4m_init_IRQ: No 'interrupt' node.\n");
447 addr
= of_get_property(dp
, "address", &len
);
450 printk(KERN_ERR
"sun4m_init_IRQ: No 'address' prop.\n");
454 num_cpu_iregs
= (len
/ sizeof(u32
)) - 1;
455 for (i
= 0; i
< num_cpu_iregs
; i
++) {
456 sun4m_irq_percpu
[i
] = (void __iomem
*)
457 (unsigned long) addr
[i
];
459 sun4m_irq_global
= (void __iomem
*)
460 (unsigned long) addr
[num_cpu_iregs
];
464 sbus_writel(~SUN4M_INT_MASKALL
, &sun4m_irq_global
->mask_set
);
465 for (i
= 0; !cpu_find_by_instance(i
, NULL
, &mid
); i
++)
466 sbus_writel(~0x17fff, &sun4m_irq_percpu
[mid
]->clear
);
468 if (num_cpu_iregs
== 4)
469 sbus_writel(0, &sun4m_irq_global
->interrupt_target
);
471 sparc_config
.init_timers
= sun4m_init_timers
;
472 sparc_config
.build_device_irq
= sun4m_build_device_irq
;
473 sparc_config
.clock_rate
= SBUS_CLOCK_RATE
;
474 sparc_config
.clear_clock_irq
= sun4m_clear_clock_irq
;
475 sparc_config
.load_profile_irq
= sun4m_load_profile_irq
;
478 /* Cannot enable interrupts until OBP ticker is disabled. */