arch/tile/include/hv/drv_mpipe_intf.h

   1 /*
   2  * Copyright 2011 Tilera Corporation. All Rights Reserved.
   3  *
   4  *   This program is free software; you can redistribute it and/or
   5  *   modify it under the terms of the GNU General Public License
   6  *   as published by the Free Software Foundation, version 2.
   7  *
   8  *   This program is distributed in the hope that it will be useful, but
   9  *   WITHOUT ANY WARRANTY; without even the implied warranty of
  10  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  11  *   NON INFRINGEMENT.  See the GNU General Public License for
  12  *   more details.
  13  */
  14
  15 /**
  16  * Interface definitions for the mpipe driver.
  17  */
  18
  19 #ifndef _SYS_HV_DRV_MPIPE_INTF_H
  20 #define _SYS_HV_DRV_MPIPE_INTF_H
  21
  22 #include <arch/mpipe.h>
  23 #include <arch/mpipe_constants.h>
  24
  25
  26 /** Number of mPIPE instances supported */
  27 #define HV_MPIPE_INSTANCE_MAX   (2)
  28
  29 /** Number of buffer stacks (32). */
  30 #define HV_MPIPE_NUM_BUFFER_STACKS \
  31   (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH)
  32
  33 /** Number of NotifRings (256). */
  34 #define HV_MPIPE_NUM_NOTIF_RINGS (MPIPE_NUM_NOTIF_RINGS)
  35
  36 /** Number of NotifGroups (32). */
  37 #define HV_MPIPE_NUM_NOTIF_GROUPS (MPIPE_NUM_NOTIF_GROUPS)
  38
  39 /** Number of buckets (4160). */
  40 #define HV_MPIPE_NUM_BUCKETS (MPIPE_NUM_BUCKETS)
  41
  42 /** Number of "lo" buckets (4096). */
  43 #define HV_MPIPE_NUM_LO_BUCKETS 4096
  44
  45 /** Number of "hi" buckets (64). */
  46 #define HV_MPIPE_NUM_HI_BUCKETS \
  47   (HV_MPIPE_NUM_BUCKETS - HV_MPIPE_NUM_LO_BUCKETS)
  48
  49 /** Number of edma rings (24). */
  50 #define HV_MPIPE_NUM_EDMA_RINGS \
  51   (MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH)
  52
  53
  54
  55
  56 /** A flag bit indicating a fixed resource allocation. */
  57 #define HV_MPIPE_ALLOC_FIXED 0x01
  58
  59 /** Offset for the config register MMIO region. */
  60 #define HV_MPIPE_CONFIG_MMIO_OFFSET \
  61   (MPIPE_MMIO_ADDR__REGION_VAL_CFG << MPIPE_MMIO_ADDR__REGION_SHIFT)
  62
  63 /** Size of the config register MMIO region. */
  64 #define HV_MPIPE_CONFIG_MMIO_SIZE (64 * 1024)
  65
  66 /** Offset for the config register MMIO region. */
  67 #define HV_MPIPE_FAST_MMIO_OFFSET \
  68   (MPIPE_MMIO_ADDR__REGION_VAL_IDMA << MPIPE_MMIO_ADDR__REGION_SHIFT)
  69
  70 /** Size of the fast register MMIO region (IDMA, EDMA, buffer stack). */
  71 #define HV_MPIPE_FAST_MMIO_SIZE \
  72   ((MPIPE_MMIO_ADDR__REGION_VAL_BSM + 1 - MPIPE_MMIO_ADDR__REGION_VAL_IDMA) \
  73    << MPIPE_MMIO_ADDR__REGION_SHIFT)
  74
  75
  76 /*
  77  * Each type of resource allocation comes in quantized chunks, where
  78  * XXX_BITS is the number of chunks, and XXX_RES_PER_BIT is the number
  79  * of resources in each chunk.
  80  */
  81
  82 /** Number of buffer stack chunks available (32). */
  83 #define HV_MPIPE_ALLOC_BUFFER_STACKS_BITS \
  84   MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH
  85
  86 /** Granularity of buffer stack allocation (1). */
  87 #define HV_MPIPE_ALLOC_BUFFER_STACKS_RES_PER_BIT \
  88   (HV_MPIPE_NUM_BUFFER_STACKS / HV_MPIPE_ALLOC_BUFFER_STACKS_BITS)
  89
  90 /** Number of NotifRing chunks available (32). */
  91 #define HV_MPIPE_ALLOC_NOTIF_RINGS_BITS \
  92   MPIPE_MMIO_INIT_DAT_GX36_0__NOTIF_RING_MASK_WIDTH
  93
  94 /** Granularity of NotifRing allocation (8). */
  95 #define HV_MPIPE_ALLOC_NOTIF_RINGS_RES_PER_BIT \
  96   (HV_MPIPE_NUM_NOTIF_RINGS / HV_MPIPE_ALLOC_NOTIF_RINGS_BITS)
  97
  98 /** Number of NotifGroup chunks available (32). */
  99 #define HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS \
 100   HV_MPIPE_NUM_NOTIF_GROUPS
 101
 102 /** Granularity of NotifGroup allocation (1). */
 103 #define HV_MPIPE_ALLOC_NOTIF_GROUPS_RES_PER_BIT \
 104   (HV_MPIPE_NUM_NOTIF_GROUPS / HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS)
 105
 106 /** Number of lo bucket chunks available (16). */
 107 #define HV_MPIPE_ALLOC_LO_BUCKETS_BITS \
 108   MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_LO_WIDTH
 109
 110 /** Granularity of lo bucket allocation (256). */
 111 #define HV_MPIPE_ALLOC_LO_BUCKETS_RES_PER_BIT \
 112   (HV_MPIPE_NUM_LO_BUCKETS / HV_MPIPE_ALLOC_LO_BUCKETS_BITS)
 113
 114 /** Number of hi bucket chunks available (16). */
 115 #define HV_MPIPE_ALLOC_HI_BUCKETS_BITS \
 116   MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_HI_WIDTH
 117
 118 /** Granularity of hi bucket allocation (4). */
 119 #define HV_MPIPE_ALLOC_HI_BUCKETS_RES_PER_BIT \
 120   (HV_MPIPE_NUM_HI_BUCKETS / HV_MPIPE_ALLOC_HI_BUCKETS_BITS)
 121
 122 /** Number of eDMA ring chunks available (24). */
 123 #define HV_MPIPE_ALLOC_EDMA_RINGS_BITS \
 124   MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH
 125
 126 /** Granularity of eDMA ring allocation (1). */
 127 #define HV_MPIPE_ALLOC_EDMA_RINGS_RES_PER_BIT \
 128   (HV_MPIPE_NUM_EDMA_RINGS / HV_MPIPE_ALLOC_EDMA_RINGS_BITS)
 129
 130
 131
 132
 133 /** Bit vector encoding which NotifRings are in a NotifGroup. */
 134 typedef struct
 135 {
 136   /** The actual bits. */
 137   uint64_t ring_mask[4];
 138
 139 } gxio_mpipe_notif_group_bits_t;
 140
 141
 142 /** Another name for MPIPE_LBL_INIT_DAT_BSTS_TBL_t. */
 143 typedef MPIPE_LBL_INIT_DAT_BSTS_TBL_t gxio_mpipe_bucket_info_t;
 144
 145
 146
 147 /** Eight buffer stack ids. */
 148 typedef struct
 149 {
 150   /** The stacks. */
 151   uint8_t stacks[8];
 152
 153 } gxio_mpipe_rules_stacks_t;
 154
 155
 156 /** A destination mac address. */
 157 typedef struct
 158 {
 159   /** The octets. */
 160   uint8_t octets[6];
 161
 162 } gxio_mpipe_rules_dmac_t;
 163
 164
 165 /** A vlan. */
 166 typedef uint16_t gxio_mpipe_rules_vlan_t;
 167
 168
 169
 170 /** Maximum number of characters in a link name. */
 171 #define GXIO_MPIPE_LINK_NAME_LEN  32
 172
 173
 174 /** Structure holding a link name.  Only needed, and only typedef'ed,
 175  *  because the IORPC stub generator only handles types which are single
 176  *  words coming before the parameter name. */
 177 typedef struct
 178 {
 179   /** The name itself. */
 180   char name[GXIO_MPIPE_LINK_NAME_LEN];
 181 }
 182 _gxio_mpipe_link_name_t;
 183
 184 /** Maximum number of characters in a symbol name. */
 185 #define GXIO_MPIPE_SYMBOL_NAME_LEN  128
 186
 187
 188 /** Structure holding a symbol name.  Only needed, and only typedef'ed,
 189  *  because the IORPC stub generator only handles types which are single
 190  *  words coming before the parameter name. */
 191 typedef struct
 192 {
 193   /** The name itself. */
 194   char name[GXIO_MPIPE_SYMBOL_NAME_LEN];
 195 }
 196 _gxio_mpipe_symbol_name_t;
 197
 198
 199 /** Structure holding a MAC address. */
 200 typedef struct
 201 {
 202   /** The address. */
 203   uint8_t mac[6];
 204 }
 205 _gxio_mpipe_link_mac_t;
 206
 207
 208
 209 /** Request shared data permission -- that is, the ability to send and
 210  *  receive packets -- on the specified link.  Other processes may also
 211  *  request shared data permission on the same link.
 212  *
 213  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
 214  *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
 215  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
 216  */
 217 #define GXIO_MPIPE_LINK_DATA               0x00000001UL
 218
 219 /** Do not request data permission on the specified link.
 220  *
 221  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
 222  *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
 223  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
 224  */
 225 #define GXIO_MPIPE_LINK_NO_DATA            0x00000002UL
 226
 227 /** Request exclusive data permission -- that is, the ability to send and
 228  *  receive packets -- on the specified link.  No other processes may
 229  *  request data permission on this link, and if any process already has
 230  *  data permission on it, this open will fail.
 231  *
 232  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
 233  *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
 234  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
 235  */
 236 #define GXIO_MPIPE_LINK_EXCL_DATA          0x00000004UL
 237
 238 /** Request shared stats permission -- that is, the ability to read and write
 239  *  registers which contain link statistics, and to get link attributes --
 240  *  on the specified link.  Other processes may also request shared stats
 241  *  permission on the same link.
 242  *
 243  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
 244  *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
 245  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
 246  */
 247 #define GXIO_MPIPE_LINK_STATS              0x00000008UL
 248
 249 /** Do not request stats permission on the specified link.
 250  *
 251  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
 252  *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
 253  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
 254  */
 255 #define GXIO_MPIPE_LINK_NO_STATS           0x00000010UL
 256
 257 /** Request exclusive stats permission -- that is, the ability to read and
 258  *  write registers which contain link statistics, and to get link
 259  *  attributes -- on the specified link.  No other processes may request
 260  *  stats permission on this link, and if any process already
 261  *  has stats permission on it, this open will fail.
 262  *
 263  *  Requesting exclusive stats permission is normally a very bad idea, since
 264  *  it prevents programs like mpipe-stat from providing information on this
 265  *  link.  Applications should only do this if they use MAC statistics
 266  *  registers, and cannot tolerate any of the clear-on-read registers being
 267  *  reset by other statistics programs.
 268  *
 269  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
 270  *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
 271  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
 272  */
 273 #define GXIO_MPIPE_LINK_EXCL_STATS         0x00000020UL
 274
 275 /** Request shared control permission -- that is, the ability to modify link
 276  *  attributes, and read and write MAC and MDIO registers -- on the
 277  *  specified link.  Other processes may also request shared control
 278  *  permission on the same link.
 279  *
 280  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
 281  *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
 282  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
 283  */
 284 #define GXIO_MPIPE_LINK_CTL                0x00000040UL
 285
 286 /** Do not request control permission on the specified link.
 287  *
 288  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
 289  *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
 290  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
 291  */
 292 #define GXIO_MPIPE_LINK_NO_CTL             0x00000080UL
 293
 294 /** Request exclusive control permission -- that is, the ability to modify
 295  *  link attributes, and read and write MAC and MDIO registers -- on the
 296  *  specified link.  No other processes may request control permission on
 297  *  this link, and if any process already has control permission on it,
 298  *  this open will fail.
 299  *
 300  *  Requesting exclusive control permission is not always a good idea, since
 301  *  it prevents programs like mpipe-link from configuring the link.
 302  *
 303  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
 304  *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
 305  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
 306  */
 307 #define GXIO_MPIPE_LINK_EXCL_CTL           0x00000100UL
 308
 309 /** Set the desired state of the link to up, allowing any speeds which are
 310  *  supported by the link hardware, as part of this open operation; do not
 311  *  change the desired state of the link when it is closed or the process
 312  *  exits.  No more than one of ::GXIO_MPIPE_LINK_AUTO_UP,
 313  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or
 314  *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open()
 315  *  call.  If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
 316  */
 317 #define GXIO_MPIPE_LINK_AUTO_UP            0x00000200UL
 318
 319 /** Set the desired state of the link to up, allowing any speeds which are
 320  *  supported by the link hardware, as part of this open operation; when the
 321  *  link is closed or this process exits, if no other process has the link
 322  *  open, set the desired state of the link to down.  No more than one of
 323  *  ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN,
 324  *  ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be
 325  *  specified in a gxio_mpipe_link_open() call.  If none are specified,
 326  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
 327  */
 328 #define GXIO_MPIPE_LINK_AUTO_UPDOWN        0x00000400UL
 329
 330 /** Do not change the desired state of the link as part of the open
 331  *  operation; when the link is closed or this process exits, if no other
 332  *  process has the link open, set the desired state of the link to down.
 333  *  No more than one of ::GXIO_MPIPE_LINK_AUTO_UP,
 334  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or
 335  *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open()
 336  *  call.  If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
 337  */
 338 #define GXIO_MPIPE_LINK_AUTO_DOWN          0x00000800UL
 339
 340 /** Do not change the desired state of the link as part of the open
 341  *  operation; do not change the desired state of the link when it is
 342  *  closed or the process exits.  No more than one of
 343  *  ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN,
 344  *  ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be
 345  *  specified in a gxio_mpipe_link_open() call.  If none are specified,
 346  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
 347  */
 348 #define GXIO_MPIPE_LINK_AUTO_NONE          0x00001000UL
 349
 350 /** Request that this open call not complete until the network link is up.
 351  *  The process will wait as long as necessary for this to happen;
 352  *  applications which wish to abandon waiting for the link after a
 353  *  specific time period should not specify this flag when opening a link,
 354  *  but should instead call gxio_mpipe_link_wait() afterward.  The link
 355  *  must be opened with stats permission.  Note that this flag by itself
 356  *  does not change the desired link state; if other open flags or previous
 357  *  link state changes have not requested a desired state of up, the open
 358  *  call will never complete.  This flag is not available to kernel
 359  *  clients.
 360  */
 361 #define GXIO_MPIPE_LINK_WAIT               0x00002000UL
 362
 363
 364 /*
 365  * Note: link attributes must fit in 24 bits, since we use the top 8 bits
 366  * of the IORPC offset word for the channel number.
 367  */
 368
 369 /** Determine whether jumbo frames may be received.  If this attribute's
 370  *  value value is nonzero, the MAC will accept frames of up to 10240 bytes.
 371  *  If the value is zero, the MAC will only accept frames of up to 1544
 372  *  bytes.  The default value is zero. */
 373 #define GXIO_MPIPE_LINK_RECEIVE_JUMBO      0x010000
 374
 375 /** Determine whether to send pause frames on this link if the mPIPE packet
 376  *  FIFO is nearly full.  If the value is zero, pause frames are not sent.
 377  *  If the value is nonzero, it is the delay value which will be sent in any
 378  *  pause frames which are output, in units of 512 bit times.
 379  *
 380  *  Bear in mind that in almost all circumstances, the mPIPE packet FIFO
 381  *  will never fill up, since mPIPE will empty it as fast as or faster than
 382  *  the incoming data rate, by either delivering or dropping packets.  The
 383  *  only situation in which this is not true is if the memory and cache
 384  *  subsystem is extremely heavily loaded, and mPIPE cannot perform DMA of
 385  *  packet data to memory in a timely fashion.  In particular, pause frames
 386  *  will <em>not</em> be sent if packets cannot be delivered because
 387  *  NotifRings are full, buckets are full, or buffers are not available in
 388  *  a buffer stack. */
 389 #define GXIO_MPIPE_LINK_SEND_PAUSE         0x020000
 390
 391 /** Determine whether to suspend output on the receipt of pause frames.
 392  *  If the value is nonzero, mPIPE shim will suspend output on the link's
 393  *  channel when a pause frame is received.  If the value is zero, pause
 394  *  frames will be ignored.  The default value is zero. */
 395 #define GXIO_MPIPE_LINK_RECEIVE_PAUSE      0x030000
 396
 397 /** Interface MAC address.  The value is a 6-byte MAC address, in the least
 398  *  significant 48 bits of the value; in other words, an address which would
 399  *  be printed as '12:34:56:78:90:AB' in IEEE 802 canonical format would
 400  *  be returned as 0x12345678ab.
 401  *
 402  *  Depending upon the overall system design, a MAC address may or may not
 403  *  be available for each interface.  Note that the interface's MAC address
 404  *  does not limit the packets received on its channel, although the
 405  *  classifier's rules could be configured to do that.  Similarly, the MAC
 406  *  address is not used when transmitting packets, although applications
 407  *  could certainly decide to use the assigned address as a source MAC
 408  *  address when doing so.  This attribute may only be retrieved with
 409  *  gxio_mpipe_link_get_attr(); it may not be modified.
 410  */
 411 #define GXIO_MPIPE_LINK_MAC                0x040000
 412
 413 /** Determine whether to discard egress packets on link down. If this value
 414  *  is nonzero, packets sent on this link while the link is down will be
 415  *  discarded.  If this value is zero, no packets will be sent on this link
 416  *  while it is down.  The default value is one. */
 417 #define GXIO_MPIPE_LINK_DISCARD_IF_DOWN    0x050000
 418
 419 /** Possible link state.  The value is a combination of link state flags,
 420  *  ORed together, that indicate link modes which are actually supported by
 421  *  the hardware.  This attribute may only be retrieved with
 422  *  gxio_mpipe_link_get_attr(); it may not be modified. */
 423 #define GXIO_MPIPE_LINK_POSSIBLE_STATE     0x060000
 424
 425 /** Current link state.  The value is a combination of link state flags,
 426  *  ORed together, that indicate the current state of the hardware.  If the
 427  *  link is down, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will be zero;
 428  *  if the link is up, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will
 429  *  result in exactly one of the speed values, indicating the current speed.
 430  *  This attribute may only be retrieved with gxio_mpipe_link_get_attr(); it
 431  *  may not be modified. */
 432 #define GXIO_MPIPE_LINK_CURRENT_STATE      0x070000
 433
 434 /** Desired link state. The value is a conbination of flags, which specify
 435  *  the desired state for the link.  With gxio_mpipe_link_set_attr(), this
 436  *  will, in the background, attempt to bring up the link using whichever of
 437  *  the requested flags are reasonable, or take down the link if the flags
 438  *  are zero.  The actual link up or down operation may happen after this
 439  *  call completes.  If the link state changes in the future, the system
 440  *  will continue to try to get back to the desired link state; for
 441  *  instance, if the link is brought up successfully, and then the network
 442  *  cable is disconnected, the link will go down.  However, the desired
 443  *  state of the link is still up, so if the cable is reconnected, the link
 444  *  will be brought up again.
 445  *
 446  *  With gxio_mpipe_link_set_attr(), this will indicate the desired state
 447  *  for the link, as set with a previous gxio_mpipe_link_set_attr() call,
 448  *  or implicitly by a gxio_mpipe_link_open() or link close operation.
 449  *  This may not reflect the current state of the link; to get that, use
 450  *  ::GXIO_MPIPE_LINK_CURRENT_STATE.
 451  */
 452 #define GXIO_MPIPE_LINK_DESIRED_STATE      0x080000
 453
 454
 455
 456 /** Link can run, should run, or is running at 10 Mbps. */
 457 #define GXIO_MPIPE_LINK_10M        0x0000000000000001UL
 458
 459 /** Link can run, should run, or is running at 100 Mbps. */
 460 #define GXIO_MPIPE_LINK_100M       0x0000000000000002UL
 461
 462 /** Link can run, should run, or is running at 1 Gbps. */
 463 #define GXIO_MPIPE_LINK_1G         0x0000000000000004UL
 464
 465 /** Link can run, should run, or is running at 10 Gbps. */
 466 #define GXIO_MPIPE_LINK_10G        0x0000000000000008UL
 467
 468 /** Link can run, should run, or is running at 20 Gbps. */
 469 #define GXIO_MPIPE_LINK_20G        0x0000000000000010UL
 470
 471 /** Link can run, should run, or is running at 25 Gbps. */
 472 #define GXIO_MPIPE_LINK_25G        0x0000000000000020UL
 473
 474 /** Link can run, should run, or is running at 50 Gbps. */
 475 #define GXIO_MPIPE_LINK_50G        0x0000000000000040UL
 476
 477 /** Link should run at the highest speed supported by the link and by
 478  *  the device connected to the link.  Only usable as a value for
 479  *  the link's desired state; never returned as a value for the current
 480  *  or possible states. */
 481 #define GXIO_MPIPE_LINK_ANYSPEED   0x0000000000000800UL
 482
 483 /** All legal link speeds.  This value is provided for use in extracting
 484  *  the speed-related subset of the link state flags; it is not intended
 485  *  to be set directly as a value for one of the GXIO_MPIPE_LINK_xxx_STATE
 486  *  attributes.  A link is up or is requested to be up if its current or
 487  *  desired state, respectively, ANDED with this value, is nonzero. */
 488 #define GXIO_MPIPE_LINK_SPEED_MASK 0x0000000000000FFFUL
 489
 490 /** Link can run, should run, or is running in MAC loopback mode.  This
 491  *  loops transmitted packets back to the receiver, inside the Tile
 492  *  Processor. */
 493 #define GXIO_MPIPE_LINK_LOOP_MAC   0x0000000000001000UL
 494
 495 /** Link can run, should run, or is running in PHY loopback mode.  This
 496  *  loops transmitted packets back to the receiver, inside the external
 497  *  PHY chip. */
 498 #define GXIO_MPIPE_LINK_LOOP_PHY   0x0000000000002000UL
 499
 500 /** Link can run, should run, or is running in external loopback mode.
 501  *  This requires that an external loopback plug be installed on the
 502  *  Ethernet port.  Note that only some links require that this be
 503  *  configured via the gxio_mpipe_link routines; other links can do
 504  *  external loopack with the plug and no special configuration. */
 505 #define GXIO_MPIPE_LINK_LOOP_EXT   0x0000000000004000UL
 506
 507 /** All legal loopback types. */
 508 #define GXIO_MPIPE_LINK_LOOP_MASK  0x000000000000F000UL
 509
 510 /** Link can run, should run, or is running in full-duplex mode.
 511  *  If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are
 512  *  specified in a set of desired state flags, both are assumed. */
 513 #define GXIO_MPIPE_LINK_FDX        0x0000000000010000UL
 514
 515 /** Link can run, should run, or is running in half-duplex mode.
 516  *  If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are
 517  *  specified in a set of desired state flags, both are assumed. */
 518 #define GXIO_MPIPE_LINK_HDX        0x0000000000020000UL
 519
 520
 521 /** An individual rule. */
 522 typedef struct
 523 {
 524   /** The total size. */
 525   uint16_t size;
 526
 527   /** The priority. */
 528   int16_t priority;
 529
 530   /** The "headroom" in each buffer. */
 531   uint8_t headroom;
 532
 533   /** The "tailroom" in each buffer. */
 534   uint8_t tailroom;
 535
 536   /** The "capacity" of the largest buffer. */
 537   uint16_t capacity;
 538
 539   /** The mask for converting a flow hash into a bucket. */
 540   uint16_t bucket_mask;
 541
 542   /** The offset for converting a flow hash into a bucket. */
 543   uint16_t bucket_first;
 544
 545   /** The buffer stack ids. */
 546   gxio_mpipe_rules_stacks_t stacks;
 547
 548   /** The actual channels. */
 549   uint32_t channel_bits;
 550
 551   /** The number of dmacs. */
 552   uint16_t num_dmacs;
 553
 554   /** The number of vlans. */
 555   uint16_t num_vlans;
 556
 557   /** The actual dmacs and vlans. */
 558   uint8_t dmacs_and_vlans[];
 559
 560 } gxio_mpipe_rules_rule_t;
 561
 562
 563 /** A list of classifier rules. */
 564 typedef struct
 565 {
 566   /** The offset to the end of the current rule. */
 567   uint16_t tail;
 568
 569   /** The offset to the start of the current rule. */
 570   uint16_t head;
 571
 572   /** The actual rules. */
 573   uint8_t rules[4096 - 4];
 574
 575 } gxio_mpipe_rules_list_t;
 576
 577
 578
 579
 580 /** mPIPE statistics structure. These counters include all relevant
 581  *  events occurring on all links within the mPIPE shim. */
 582 typedef struct
 583 {
 584   /** Number of ingress packets dropped for any reason. */
 585   uint64_t ingress_drops;
 586   /** Number of ingress packets dropped because a buffer stack was empty. */
 587   uint64_t ingress_drops_no_buf;
 588   /** Number of ingress packets dropped or truncated due to lack of space in
 589    *  the iPkt buffer. */
 590   uint64_t ingress_drops_ipkt;
 591   /** Number of ingress packets dropped by the classifier or load balancer */
 592   uint64_t ingress_drops_cls_lb;
 593   /** Total number of ingress packets. */
 594   uint64_t ingress_packets;
 595   /** Total number of egress packets. */
 596   uint64_t egress_packets;
 597   /** Total number of ingress bytes. */
 598   uint64_t ingress_bytes;
 599   /** Total number of egress bytes. */
 600   uint64_t egress_bytes;
 601 }
 602 gxio_mpipe_stats_t;
 603
 604
 605 #endif /* _SYS_HV_DRV_MPIPE_INTF_H */