drivers/acpi/acpi_lpss.c

   1 /*
   2  * ACPI support for Intel Lynxpoint LPSS.
   3  *
   4  * Copyright (C) 2013, Intel Corporation
   5  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
   6  *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/acpi.h>
  14 #include <linux/clkdev.h>
  15 #include <linux/clk-provider.h>
  16 #include <linux/err.h>
  17 #include <linux/io.h>
  18 #include <linux/mutex.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/platform_data/clk-lpss.h>
  21 #include <linux/platform_data/x86/pmc_atom.h>
  22 #include <linux/pm_domain.h>
  23 #include <linux/pm_runtime.h>
  24 #include <linux/pwm.h>
  25 #include <linux/delay.h>
  26
  27 #include "internal.h"
  28
  29 ACPI_MODULE_NAME("acpi_lpss");
  30
  31 #ifdef CONFIG_X86_INTEL_LPSS
  32
  33 #include <asm/cpu_device_id.h>
  34 #include <asm/intel-family.h>
  35 #include <asm/iosf_mbi.h>
  36
  37 #define LPSS_ADDR(desc) ((unsigned long)&desc)
  38
  39 #define LPSS_CLK_SIZE   0x04
  40 #define LPSS_LTR_SIZE   0x18
  41
  42 /* Offsets relative to LPSS_PRIVATE_OFFSET */
  43 #define LPSS_CLK_DIVIDER_DEF_MASK       (BIT(1) | BIT(16))
  44 #define LPSS_RESETS                     0x04
  45 #define LPSS_RESETS_RESET_FUNC          BIT(0)
  46 #define LPSS_RESETS_RESET_APB           BIT(1)
  47 #define LPSS_GENERAL                    0x08
  48 #define LPSS_GENERAL_LTR_MODE_SW        BIT(2)
  49 #define LPSS_GENERAL_UART_RTS_OVRD      BIT(3)
  50 #define LPSS_SW_LTR                     0x10
  51 #define LPSS_AUTO_LTR                   0x14
  52 #define LPSS_LTR_SNOOP_REQ              BIT(15)
  53 #define LPSS_LTR_SNOOP_MASK             0x0000FFFF
  54 #define LPSS_LTR_SNOOP_LAT_1US          0x800
  55 #define LPSS_LTR_SNOOP_LAT_32US         0xC00
  56 #define LPSS_LTR_SNOOP_LAT_SHIFT        5
  57 #define LPSS_LTR_SNOOP_LAT_CUTOFF       3000
  58 #define LPSS_LTR_MAX_VAL                0x3FF
  59 #define LPSS_TX_INT                     0x20
  60 #define LPSS_TX_INT_MASK                BIT(1)
  61
  62 #define LPSS_PRV_REG_COUNT              9
  63
  64 /* LPSS Flags */
  65 #define LPSS_CLK                        BIT(0)
  66 #define LPSS_CLK_GATE                   BIT(1)
  67 #define LPSS_CLK_DIVIDER                BIT(2)
  68 #define LPSS_LTR                        BIT(3)
  69 #define LPSS_SAVE_CTX                   BIT(4)
  70 #define LPSS_NO_D3_DELAY                BIT(5)
  71
  72 struct lpss_private_data;
  73
  74 struct lpss_device_desc {
  75         unsigned int flags;
  76         const char *clk_con_id;
  77         unsigned int prv_offset;
  78         size_t prv_size_override;
  79         struct property_entry *properties;
  80         void (*setup)(struct lpss_private_data *pdata);
  81 };
  82
  83 static const struct lpss_device_desc lpss_dma_desc = {
  84         .flags = LPSS_CLK,
  85 };
  86
  87 struct lpss_private_data {
  88         struct acpi_device *adev;
  89         void __iomem *mmio_base;
  90         resource_size_t mmio_size;
  91         unsigned int fixed_clk_rate;
  92         struct clk *clk;
  93         const struct lpss_device_desc *dev_desc;
  94         u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
  95 };
  96
  97 /* LPSS run time quirks */
  98 static unsigned int lpss_quirks;
  99
 100 /*
 101  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
 102  *
 103  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
 104  * it can be powered off automatically whenever the last LPSS device goes down.
 105  * In case of no power any access to the DMA controller will hang the system.
 106  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
 107  * well as on ASuS T100TA transformer.
 108  *
 109  * This quirk overrides power state of entire LPSS island to keep DMA powered
 110  * on whenever we have at least one other device in use.
 111  */
 112 #define LPSS_QUIRK_ALWAYS_POWER_ON      BIT(0)
 113
 114 /* UART Component Parameter Register */
 115 #define LPSS_UART_CPR                   0xF4
 116 #define LPSS_UART_CPR_AFCE              BIT(4)
 117
 118 static void lpss_uart_setup(struct lpss_private_data *pdata)
 119 {
 120         unsigned int offset;
 121         u32 val;
 122
 123         offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
 124         val = readl(pdata->mmio_base + offset);
 125         writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
 126
 127         val = readl(pdata->mmio_base + LPSS_UART_CPR);
 128         if (!(val & LPSS_UART_CPR_AFCE)) {
 129                 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
 130                 val = readl(pdata->mmio_base + offset);
 131                 val |= LPSS_GENERAL_UART_RTS_OVRD;
 132                 writel(val, pdata->mmio_base + offset);
 133         }
 134 }
 135
 136 static void lpss_deassert_reset(struct lpss_private_data *pdata)
 137 {
 138         unsigned int offset;
 139         u32 val;
 140
 141         offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
 142         val = readl(pdata->mmio_base + offset);
 143         val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 144         writel(val, pdata->mmio_base + offset);
 145 }
 146
 147 /*
 148  * BYT PWM used for backlight control by the i915 driver on systems without
 149  * the Crystal Cove PMIC.
 150  */
 151 static struct pwm_lookup byt_pwm_lookup[] = {
 152         PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
 153                                "pwm_backlight", 0, PWM_POLARITY_NORMAL,
 154                                "pwm-lpss-platform"),
 155 };
 156
 157 static void byt_pwm_setup(struct lpss_private_data *pdata)
 158 {
 159         struct acpi_device *adev = pdata->adev;
 160
 161         /* Only call pwm_add_table for the first PWM controller */
 162         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 163                 return;
 164
 165         if (!acpi_dev_present("INT33FD", NULL, -1))
 166                 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
 167 }
 168
 169 #define LPSS_I2C_ENABLE                 0x6c
 170
 171 static void byt_i2c_setup(struct lpss_private_data *pdata)
 172 {
 173         lpss_deassert_reset(pdata);
 174
 175         if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 176                 pdata->fixed_clk_rate = 133000000;
 177
 178         writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 179 }
 180
 181 /* BSW PWM used for backlight control by the i915 driver */
 182 static struct pwm_lookup bsw_pwm_lookup[] = {
 183         PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
 184                                "pwm_backlight", 0, PWM_POLARITY_NORMAL,
 185                                "pwm-lpss-platform"),
 186 };
 187
 188 static void bsw_pwm_setup(struct lpss_private_data *pdata)
 189 {
 190         struct acpi_device *adev = pdata->adev;
 191
 192         /* Only call pwm_add_table for the first PWM controller */
 193         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 194                 return;
 195
 196         pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
 197 }
 198
 199 static const struct lpss_device_desc lpt_dev_desc = {
 200         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 201         .prv_offset = 0x800,
 202 };
 203
 204 static const struct lpss_device_desc lpt_i2c_dev_desc = {
 205         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
 206         .prv_offset = 0x800,
 207 };
 208
 209 static struct property_entry uart_properties[] = {
 210         PROPERTY_ENTRY_U32("reg-io-width", 4),
 211         PROPERTY_ENTRY_U32("reg-shift", 2),
 212         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
 213         { },
 214 };
 215
 216 static const struct lpss_device_desc lpt_uart_dev_desc = {
 217         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 218         .clk_con_id = "baudclk",
 219         .prv_offset = 0x800,
 220         .setup = lpss_uart_setup,
 221         .properties = uart_properties,
 222 };
 223
 224 static const struct lpss_device_desc lpt_sdio_dev_desc = {
 225         .flags = LPSS_LTR,
 226         .prv_offset = 0x1000,
 227         .prv_size_override = 0x1018,
 228 };
 229
 230 static const struct lpss_device_desc byt_pwm_dev_desc = {
 231         .flags = LPSS_SAVE_CTX,
 232         .setup = byt_pwm_setup,
 233 };
 234
 235 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 236         .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 237         .setup = bsw_pwm_setup,
 238 };
 239
 240 static const struct lpss_device_desc byt_uart_dev_desc = {
 241         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 242         .clk_con_id = "baudclk",
 243         .prv_offset = 0x800,
 244         .setup = lpss_uart_setup,
 245         .properties = uart_properties,
 246 };
 247
 248 static const struct lpss_device_desc bsw_uart_dev_desc = {
 249         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 250                         | LPSS_NO_D3_DELAY,
 251         .clk_con_id = "baudclk",
 252         .prv_offset = 0x800,
 253         .setup = lpss_uart_setup,
 254         .properties = uart_properties,
 255 };
 256
 257 static const struct lpss_device_desc byt_spi_dev_desc = {
 258         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 259         .prv_offset = 0x400,
 260 };
 261
 262 static const struct lpss_device_desc byt_sdio_dev_desc = {
 263         .flags = LPSS_CLK,
 264 };
 265
 266 static const struct lpss_device_desc byt_i2c_dev_desc = {
 267         .flags = LPSS_CLK | LPSS_SAVE_CTX,
 268         .prv_offset = 0x800,
 269         .setup = byt_i2c_setup,
 270 };
 271
 272 static const struct lpss_device_desc bsw_i2c_dev_desc = {
 273         .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 274         .prv_offset = 0x800,
 275         .setup = byt_i2c_setup,
 276 };
 277
 278 static const struct lpss_device_desc bsw_spi_dev_desc = {
 279         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 280                         | LPSS_NO_D3_DELAY,
 281         .prv_offset = 0x400,
 282         .setup = lpss_deassert_reset,
 283 };
 284
 285 #define ICPU(model)     { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 286
 287 static const struct x86_cpu_id lpss_cpu_ids[] = {
 288         ICPU(INTEL_FAM6_ATOM_SILVERMONT1),      /* Valleyview, Bay Trail */
 289         ICPU(INTEL_FAM6_ATOM_AIRMONT),  /* Braswell, Cherry Trail */
 290         {}
 291 };
 292
 293 #else
 294
 295 #define LPSS_ADDR(desc) (0UL)
 296
 297 #endif /* CONFIG_X86_INTEL_LPSS */
 298
 299 static const struct acpi_device_id acpi_lpss_device_ids[] = {
 300         /* Generic LPSS devices */
 301         { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
 302
 303         /* Lynxpoint LPSS devices */
 304         { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
 305         { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
 306         { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
 307         { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
 308         { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
 309         { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
 310         { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
 311         { "INT33C7", },
 312
 313         /* BayTrail LPSS devices */
 314         { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
 315         { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
 316         { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
 317         { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
 318         { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
 319         { "INT33B2", },
 320         { "INT33FC", },
 321
 322         /* Braswell LPSS devices */
 323         { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 324         { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 325         { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 326         { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 327
 328         /* Broadwell LPSS devices */
 329         { "INT3430", LPSS_ADDR(lpt_dev_desc) },
 330         { "INT3431", LPSS_ADDR(lpt_dev_desc) },
 331         { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
 332         { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
 333         { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
 334         { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
 335         { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
 336         { "INT3437", },
 337
 338         /* Wildcat Point LPSS devices */
 339         { "INT3438", LPSS_ADDR(lpt_dev_desc) },
 340
 341         { }
 342 };
 343
 344 #ifdef CONFIG_X86_INTEL_LPSS
 345
 346 static int is_memory(struct acpi_resource *res, void *not_used)
 347 {
 348         struct resource r;
 349         return !acpi_dev_resource_memory(res, &r);
 350 }
 351
 352 /* LPSS main clock device. */
 353 static struct platform_device *lpss_clk_dev;
 354
 355 static inline void lpt_register_clock_device(void)
 356 {
 357         lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
 358 }
 359
 360 static int register_device_clock(struct acpi_device *adev,
 361                                  struct lpss_private_data *pdata)
 362 {
 363         const struct lpss_device_desc *dev_desc = pdata->dev_desc;
 364         const char *devname = dev_name(&adev->dev);
 365         struct clk *clk;
 366         struct lpss_clk_data *clk_data;
 367         const char *parent, *clk_name;
 368         void __iomem *prv_base;
 369
 370         if (!lpss_clk_dev)
 371                 lpt_register_clock_device();
 372
 373         clk_data = platform_get_drvdata(lpss_clk_dev);
 374         if (!clk_data)
 375                 return -ENODEV;
 376         clk = clk_data->clk;
 377
 378         if (!pdata->mmio_base
 379             || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 380                 return -ENODATA;
 381
 382         parent = clk_data->name;
 383         prv_base = pdata->mmio_base + dev_desc->prv_offset;
 384
 385         if (pdata->fixed_clk_rate) {
 386                 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
 387                                               pdata->fixed_clk_rate);
 388                 goto out;
 389         }
 390
 391         if (dev_desc->flags & LPSS_CLK_GATE) {
 392                 clk = clk_register_gate(NULL, devname, parent, 0,
 393                                         prv_base, 0, 0, NULL);
 394                 parent = devname;
 395         }
 396
 397         if (dev_desc->flags & LPSS_CLK_DIVIDER) {
 398                 /* Prevent division by zero */
 399                 if (!readl(prv_base))
 400                         writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
 401
 402                 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
 403                 if (!clk_name)
 404                         return -ENOMEM;
 405                 clk = clk_register_fractional_divider(NULL, clk_name, parent,
 406                                                       0, prv_base,
 407                                                       1, 15, 16, 15, 0, NULL);
 408                 parent = clk_name;
 409
 410                 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
 411                 if (!clk_name) {
 412                         kfree(parent);
 413                         return -ENOMEM;
 414                 }
 415                 clk = clk_register_gate(NULL, clk_name, parent,
 416                                         CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 417                                         prv_base, 31, 0, NULL);
 418                 kfree(parent);
 419                 kfree(clk_name);
 420         }
 421 out:
 422         if (IS_ERR(clk))
 423                 return PTR_ERR(clk);
 424
 425         pdata->clk = clk;
 426         clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
 427         return 0;
 428 }
 429
 430 struct lpss_device_links {
 431         const char *supplier_hid;
 432         const char *supplier_uid;
 433         const char *consumer_hid;
 434         const char *consumer_uid;
 435         u32 flags;
 436 };
 437
 438 /*
 439  * The _DEP method is used to identify dependencies but instead of creating
 440  * device links for every handle in _DEP, only links in the following list are
 441  * created. That is necessary because, in the general case, _DEP can refer to
 442  * devices that might not have drivers, or that are on different buses, or where
 443  * the supplier is not enumerated until after the consumer is probed.
 444  */
 445 static const struct lpss_device_links lpss_device_links[] = {
 446         {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
 447 };
 448
 449 static bool hid_uid_match(const char *hid1, const char *uid1,
 450                           const char *hid2, const char *uid2)
 451 {
 452         return !strcmp(hid1, hid2) && uid1 && uid2 && !strcmp(uid1, uid2);
 453 }
 454
 455 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
 456                                   const struct lpss_device_links *link)
 457 {
 458         return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
 459                              link->supplier_hid, link->supplier_uid);
 460 }
 461
 462 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
 463                                   const struct lpss_device_links *link)
 464 {
 465         return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
 466                              link->consumer_hid, link->consumer_uid);
 467 }
 468
 469 struct hid_uid {
 470         const char *hid;
 471         const char *uid;
 472 };
 473
 474 static int match_hid_uid(struct device *dev, void *data)
 475 {
 476         struct acpi_device *adev = ACPI_COMPANION(dev);
 477         struct hid_uid *id = data;
 478
 479         if (!adev)
 480                 return 0;
 481
 482         return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
 483                              id->hid, id->uid);
 484 }
 485
 486 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
 487 {
 488         struct hid_uid data = {
 489                 .hid = hid,
 490                 .uid = uid,
 491         };
 492
 493         return bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
 494 }
 495
 496 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
 497 {
 498         struct acpi_handle_list dep_devices;
 499         acpi_status status;
 500         int i;
 501
 502         if (!acpi_has_method(adev->handle, "_DEP"))
 503                 return false;
 504
 505         status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
 506                                          &dep_devices);
 507         if (ACPI_FAILURE(status)) {
 508                 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
 509                 return false;
 510         }
 511
 512         for (i = 0; i < dep_devices.count; i++) {
 513                 if (dep_devices.handles[i] == handle)
 514                         return true;
 515         }
 516
 517         return false;
 518 }
 519
 520 static void acpi_lpss_link_consumer(struct device *dev1,
 521                                     const struct lpss_device_links *link)
 522 {
 523         struct device *dev2;
 524
 525         dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
 526         if (!dev2)
 527                 return;
 528
 529         if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
 530                 device_link_add(dev2, dev1, link->flags);
 531
 532         put_device(dev2);
 533 }
 534
 535 static void acpi_lpss_link_supplier(struct device *dev1,
 536                                     const struct lpss_device_links *link)
 537 {
 538         struct device *dev2;
 539
 540         dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
 541         if (!dev2)
 542                 return;
 543
 544         if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
 545                 device_link_add(dev1, dev2, link->flags);
 546
 547         put_device(dev2);
 548 }
 549
 550 static void acpi_lpss_create_device_links(struct acpi_device *adev,
 551                                           struct platform_device *pdev)
 552 {
 553         int i;
 554
 555         for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
 556                 const struct lpss_device_links *link = &lpss_device_links[i];
 557
 558                 if (acpi_lpss_is_supplier(adev, link))
 559                         acpi_lpss_link_consumer(&pdev->dev, link);
 560
 561                 if (acpi_lpss_is_consumer(adev, link))
 562                         acpi_lpss_link_supplier(&pdev->dev, link);
 563         }
 564 }
 565
 566 static int acpi_lpss_create_device(struct acpi_device *adev,
 567                                    const struct acpi_device_id *id)
 568 {
 569         const struct lpss_device_desc *dev_desc;
 570         struct lpss_private_data *pdata;
 571         struct resource_entry *rentry;
 572         struct list_head resource_list;
 573         struct platform_device *pdev;
 574         int ret;
 575
 576         dev_desc = (const struct lpss_device_desc *)id->driver_data;
 577         if (!dev_desc) {
 578                 pdev = acpi_create_platform_device(adev, NULL);
 579                 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
 580         }
 581         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 582         if (!pdata)
 583                 return -ENOMEM;
 584
 585         INIT_LIST_HEAD(&resource_list);
 586         ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
 587         if (ret < 0)
 588                 goto err_out;
 589
 590         list_for_each_entry(rentry, &resource_list, node)
 591                 if (resource_type(rentry->res) == IORESOURCE_MEM) {
 592                         if (dev_desc->prv_size_override)
 593                                 pdata->mmio_size = dev_desc->prv_size_override;
 594                         else
 595                                 pdata->mmio_size = resource_size(rentry->res);
 596                         pdata->mmio_base = ioremap(rentry->res->start,
 597                                                    pdata->mmio_size);
 598                         break;
 599                 }
 600
 601         acpi_dev_free_resource_list(&resource_list);
 602
 603         if (!pdata->mmio_base) {
 604                 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
 605                 adev->pnp.type.platform_id = 0;
 606                 /* Skip the device, but continue the namespace scan. */
 607                 ret = 0;
 608                 goto err_out;
 609         }
 610
 611         pdata->adev = adev;
 612         pdata->dev_desc = dev_desc;
 613
 614         if (dev_desc->setup)
 615                 dev_desc->setup(pdata);
 616
 617         if (dev_desc->flags & LPSS_CLK) {
 618                 ret = register_device_clock(adev, pdata);
 619                 if (ret) {
 620                         /* Skip the device, but continue the namespace scan. */
 621                         ret = 0;
 622                         goto err_out;
 623                 }
 624         }
 625
 626         /*
 627          * This works around a known issue in ACPI tables where LPSS devices
 628          * have _PS0 and _PS3 without _PSC (and no power resources), so
 629          * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 630          */
 631         ret = acpi_device_fix_up_power(adev);
 632         if (ret) {
 633                 /* Skip the device, but continue the namespace scan. */
 634                 ret = 0;
 635                 goto err_out;
 636         }
 637
 638         adev->driver_data = pdata;
 639         pdev = acpi_create_platform_device(adev, dev_desc->properties);
 640         if (!IS_ERR_OR_NULL(pdev)) {
 641                 acpi_lpss_create_device_links(adev, pdev);
 642                 return 1;
 643         }
 644
 645         ret = PTR_ERR(pdev);
 646         adev->driver_data = NULL;
 647
 648  err_out:
 649         kfree(pdata);
 650         return ret;
 651 }
 652
 653 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
 654 {
 655         return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 656 }
 657
 658 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
 659                              unsigned int reg)
 660 {
 661         writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 662 }
 663
 664 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
 665 {
 666         struct acpi_device *adev;
 667         struct lpss_private_data *pdata;
 668         unsigned long flags;
 669         int ret;
 670
 671         ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
 672         if (WARN_ON(ret))
 673                 return ret;
 674
 675         spin_lock_irqsave(&dev->power.lock, flags);
 676         if (pm_runtime_suspended(dev)) {
 677                 ret = -EAGAIN;
 678                 goto out;
 679         }
 680         pdata = acpi_driver_data(adev);
 681         if (WARN_ON(!pdata || !pdata->mmio_base)) {
 682                 ret = -ENODEV;
 683                 goto out;
 684         }
 685         *val = __lpss_reg_read(pdata, reg);
 686
 687  out:
 688         spin_unlock_irqrestore(&dev->power.lock, flags);
 689         return ret;
 690 }
 691
 692 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
 693                              char *buf)
 694 {
 695         u32 ltr_value = 0;
 696         unsigned int reg;
 697         int ret;
 698
 699         reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
 700         ret = lpss_reg_read(dev, reg, &ltr_value);
 701         if (ret)
 702                 return ret;
 703
 704         return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
 705 }
 706
 707 static ssize_t lpss_ltr_mode_show(struct device *dev,
 708                                   struct device_attribute *attr, char *buf)
 709 {
 710         u32 ltr_mode = 0;
 711         char *outstr;
 712         int ret;
 713
 714         ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
 715         if (ret)
 716                 return ret;
 717
 718         outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
 719         return sprintf(buf, "%s\n", outstr);
 720 }
 721
 722 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
 723 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
 724 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
 725
 726 static struct attribute *lpss_attrs[] = {
 727         &dev_attr_auto_ltr.attr,
 728         &dev_attr_sw_ltr.attr,
 729         &dev_attr_ltr_mode.attr,
 730         NULL,
 731 };
 732
 733 static const struct attribute_group lpss_attr_group = {
 734         .attrs = lpss_attrs,
 735         .name = "lpss_ltr",
 736 };
 737
 738 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
 739 {
 740         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 741         u32 ltr_mode, ltr_val;
 742
 743         ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
 744         if (val < 0) {
 745                 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
 746                         ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
 747                         __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 748                 }
 749                 return;
 750         }
 751         ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
 752         if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
 753                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
 754                 val = LPSS_LTR_MAX_VAL;
 755         } else if (val > LPSS_LTR_MAX_VAL) {
 756                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
 757                 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
 758         } else {
 759                 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
 760         }
 761         ltr_val |= val;
 762         __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
 763         if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
 764                 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
 765                 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 766         }
 767 }
 768
 769 #ifdef CONFIG_PM
 770 /**
 771  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
 772  * @dev: LPSS device
 773  * @pdata: pointer to the private data of the LPSS device
 774  *
 775  * Most LPSS devices have private registers which may loose their context when
 776  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
 777  * prv_reg_ctx array.
 778  */
 779 static void acpi_lpss_save_ctx(struct device *dev,
 780                                struct lpss_private_data *pdata)
 781 {
 782         unsigned int i;
 783
 784         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 785                 unsigned long offset = i * sizeof(u32);
 786
 787                 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
 788                 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
 789                         pdata->prv_reg_ctx[i], offset);
 790         }
 791 }
 792
 793 /**
 794  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
 795  * @dev: LPSS device
 796  * @pdata: pointer to the private data of the LPSS device
 797  *
 798  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
 799  */
 800 static void acpi_lpss_restore_ctx(struct device *dev,
 801                                   struct lpss_private_data *pdata)
 802 {
 803         unsigned int i;
 804
 805         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 806                 unsigned long offset = i * sizeof(u32);
 807
 808                 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
 809                 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
 810                         pdata->prv_reg_ctx[i], offset);
 811         }
 812 }
 813
 814 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
 815 {
 816         /*
 817          * The following delay is needed or the subsequent write operations may
 818          * fail. The LPSS devices are actually PCI devices and the PCI spec
 819          * expects 10ms delay before the device can be accessed after D3 to D0
 820          * transition. However some platforms like BSW does not need this delay.
 821          */
 822         unsigned int delay = 10;        /* default 10ms delay */
 823
 824         if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
 825                 delay = 0;
 826
 827         msleep(delay);
 828 }
 829
 830 static int acpi_lpss_activate(struct device *dev)
 831 {
 832         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 833         int ret;
 834
 835         ret = acpi_dev_resume(dev);
 836         if (ret)
 837                 return ret;
 838
 839         acpi_lpss_d3_to_d0_delay(pdata);
 840
 841         /*
 842          * This is called only on ->probe() stage where a device is either in
 843          * known state defined by BIOS or most likely powered off. Due to this
 844          * we have to deassert reset line to be sure that ->probe() will
 845          * recognize the device.
 846          */
 847         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 848                 lpss_deassert_reset(pdata);
 849
 850         return 0;
 851 }
 852
 853 static void acpi_lpss_dismiss(struct device *dev)
 854 {
 855         acpi_dev_suspend(dev, false);
 856 }
 857
 858 /* IOSF SB for LPSS island */
 859 #define LPSS_IOSF_UNIT_LPIOEP           0xA0
 860 #define LPSS_IOSF_UNIT_LPIO1            0xAB
 861 #define LPSS_IOSF_UNIT_LPIO2            0xAC
 862
 863 #define LPSS_IOSF_PMCSR                 0x84
 864 #define LPSS_PMCSR_D0                   0
 865 #define LPSS_PMCSR_D3hot                3
 866 #define LPSS_PMCSR_Dx_MASK              GENMASK(1, 0)
 867
 868 #define LPSS_IOSF_GPIODEF0              0x154
 869 #define LPSS_GPIODEF0_DMA1_D3           BIT(2)
 870 #define LPSS_GPIODEF0_DMA2_D3           BIT(3)
 871 #define LPSS_GPIODEF0_DMA_D3_MASK       GENMASK(3, 2)
 872 #define LPSS_GPIODEF0_DMA_LLP           BIT(13)
 873
 874 static DEFINE_MUTEX(lpss_iosf_mutex);
 875
 876 static void lpss_iosf_enter_d3_state(void)
 877 {
 878         u32 value1 = 0;
 879         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 880         u32 value2 = LPSS_PMCSR_D3hot;
 881         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 882         /*
 883          * PMC provides an information about actual status of the LPSS devices.
 884          * Here we read the values related to LPSS power island, i.e. LPSS
 885          * devices, excluding both LPSS DMA controllers, along with SCC domain.
 886          */
 887         u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
 888         int ret;
 889
 890         ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
 891         if (ret)
 892                 return;
 893
 894         mutex_lock(&lpss_iosf_mutex);
 895
 896         ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
 897         if (ret)
 898                 goto exit;
 899
 900         /*
 901          * Get the status of entire LPSS power island per device basis.
 902          * Shutdown both LPSS DMA controllers if and only if all other devices
 903          * are already in D3hot.
 904          */
 905         pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
 906         if (pmc_status)
 907                 goto exit;
 908
 909         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 910                         LPSS_IOSF_PMCSR, value2, mask2);
 911
 912         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 913                         LPSS_IOSF_PMCSR, value2, mask2);
 914
 915         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 916                         LPSS_IOSF_GPIODEF0, value1, mask1);
 917 exit:
 918         mutex_unlock(&lpss_iosf_mutex);
 919 }
 920
 921 static void lpss_iosf_exit_d3_state(void)
 922 {
 923         u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
 924                      LPSS_GPIODEF0_DMA_LLP;
 925         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 926         u32 value2 = LPSS_PMCSR_D0;
 927         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 928
 929         mutex_lock(&lpss_iosf_mutex);
 930
 931         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 932                         LPSS_IOSF_GPIODEF0, value1, mask1);
 933
 934         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 935                         LPSS_IOSF_PMCSR, value2, mask2);
 936
 937         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 938                         LPSS_IOSF_PMCSR, value2, mask2);
 939
 940         mutex_unlock(&lpss_iosf_mutex);
 941 }
 942
 943 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
 944 {
 945         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 946         int ret;
 947
 948         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 949                 acpi_lpss_save_ctx(dev, pdata);
 950
 951         ret = acpi_dev_suspend(dev, wakeup);
 952
 953         /*
 954          * This call must be last in the sequence, otherwise PMC will return
 955          * wrong status for devices being about to be powered off. See
 956          * lpss_iosf_enter_d3_state() for further information.
 957          */
 958         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
 959                 lpss_iosf_enter_d3_state();
 960
 961         return ret;
 962 }
 963
 964 static int acpi_lpss_resume(struct device *dev)
 965 {
 966         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 967         int ret;
 968
 969         /*
 970          * This call is kept first to be in symmetry with
 971          * acpi_lpss_runtime_suspend() one.
 972          */
 973         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
 974                 lpss_iosf_exit_d3_state();
 975
 976         ret = acpi_dev_resume(dev);
 977         if (ret)
 978                 return ret;
 979
 980         acpi_lpss_d3_to_d0_delay(pdata);
 981
 982         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 983                 acpi_lpss_restore_ctx(dev, pdata);
 984
 985         return 0;
 986 }
 987
 988 #ifdef CONFIG_PM_SLEEP
 989 static int acpi_lpss_suspend_late(struct device *dev)
 990 {
 991         int ret;
 992
 993         if (dev_pm_smart_suspend_and_suspended(dev))
 994                 return 0;
 995
 996         ret = pm_generic_suspend_late(dev);
 997         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
 998 }
 999
1000 static int acpi_lpss_resume_early(struct device *dev)
1001 {
1002         int ret = acpi_lpss_resume(dev);
1003
1004         return ret ? ret : pm_generic_resume_early(dev);
1005 }
1006 #endif /* CONFIG_PM_SLEEP */
1007
1008 static int acpi_lpss_runtime_suspend(struct device *dev)
1009 {
1010         int ret = pm_generic_runtime_suspend(dev);
1011
1012         return ret ? ret : acpi_lpss_suspend(dev, true);
1013 }
1014
1015 static int acpi_lpss_runtime_resume(struct device *dev)
1016 {
1017         int ret = acpi_lpss_resume(dev);
1018
1019         return ret ? ret : pm_generic_runtime_resume(dev);
1020 }
1021 #endif /* CONFIG_PM */
1022
1023 static struct dev_pm_domain acpi_lpss_pm_domain = {
1024 #ifdef CONFIG_PM
1025         .activate = acpi_lpss_activate,
1026         .dismiss = acpi_lpss_dismiss,
1027 #endif
1028         .ops = {
1029 #ifdef CONFIG_PM
1030 #ifdef CONFIG_PM_SLEEP
1031                 .prepare = acpi_subsys_prepare,
1032                 .complete = acpi_subsys_complete,
1033                 .suspend = acpi_subsys_suspend,
1034                 .suspend_late = acpi_lpss_suspend_late,
1035                 .suspend_noirq = acpi_subsys_suspend_noirq,
1036                 .resume_noirq = acpi_subsys_resume_noirq,
1037                 .resume_early = acpi_lpss_resume_early,
1038                 .freeze = acpi_subsys_freeze,
1039                 .freeze_late = acpi_subsys_freeze_late,
1040                 .freeze_noirq = acpi_subsys_freeze_noirq,
1041                 .thaw_noirq = acpi_subsys_thaw_noirq,
1042                 .poweroff = acpi_subsys_suspend,
1043                 .poweroff_late = acpi_lpss_suspend_late,
1044                 .poweroff_noirq = acpi_subsys_suspend_noirq,
1045                 .restore_noirq = acpi_subsys_resume_noirq,
1046                 .restore_early = acpi_lpss_resume_early,
1047 #endif
1048                 .runtime_suspend = acpi_lpss_runtime_suspend,
1049                 .runtime_resume = acpi_lpss_runtime_resume,
1050 #endif
1051         },
1052 };
1053
1054 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1055                                      unsigned long action, void *data)
1056 {
1057         struct platform_device *pdev = to_platform_device(data);
1058         struct lpss_private_data *pdata;
1059         struct acpi_device *adev;
1060         const struct acpi_device_id *id;
1061
1062         id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1063         if (!id || !id->driver_data)
1064                 return 0;
1065
1066         if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1067                 return 0;
1068
1069         pdata = acpi_driver_data(adev);
1070         if (!pdata)
1071                 return 0;
1072
1073         if (pdata->mmio_base &&
1074             pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1075                 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1076                 return 0;
1077         }
1078
1079         switch (action) {
1080         case BUS_NOTIFY_BIND_DRIVER:
1081                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1082                 break;
1083         case BUS_NOTIFY_DRIVER_NOT_BOUND:
1084         case BUS_NOTIFY_UNBOUND_DRIVER:
1085                 dev_pm_domain_set(&pdev->dev, NULL);
1086                 break;
1087         case BUS_NOTIFY_ADD_DEVICE:
1088                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1089                 if (pdata->dev_desc->flags & LPSS_LTR)
1090                         return sysfs_create_group(&pdev->dev.kobj,
1091                                                   &lpss_attr_group);
1092                 break;
1093         case BUS_NOTIFY_DEL_DEVICE:
1094                 if (pdata->dev_desc->flags & LPSS_LTR)
1095                         sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1096                 dev_pm_domain_set(&pdev->dev, NULL);
1097                 break;
1098         default:
1099                 break;
1100         }
1101
1102         return 0;
1103 }
1104
1105 static struct notifier_block acpi_lpss_nb = {
1106         .notifier_call = acpi_lpss_platform_notify,
1107 };
1108
1109 static void acpi_lpss_bind(struct device *dev)
1110 {
1111         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1112
1113         if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1114                 return;
1115
1116         if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1117                 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1118         else
1119                 dev_err(dev, "MMIO size insufficient to access LTR\n");
1120 }
1121
1122 static void acpi_lpss_unbind(struct device *dev)
1123 {
1124         dev->power.set_latency_tolerance = NULL;
1125 }
1126
1127 static struct acpi_scan_handler lpss_handler = {
1128         .ids = acpi_lpss_device_ids,
1129         .attach = acpi_lpss_create_device,
1130         .bind = acpi_lpss_bind,
1131         .unbind = acpi_lpss_unbind,
1132 };
1133
1134 void __init acpi_lpss_init(void)
1135 {
1136         const struct x86_cpu_id *id;
1137         int ret;
1138
1139         ret = lpt_clk_init();
1140         if (ret)
1141                 return;
1142
1143         id = x86_match_cpu(lpss_cpu_ids);
1144         if (id)
1145                 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1146
1147         bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1148         acpi_scan_add_handler(&lpss_handler);
1149 }
1150
1151 #else
1152
1153 static struct acpi_scan_handler lpss_handler = {
1154         .ids = acpi_lpss_device_ids,
1155 };
1156
1157 void __init acpi_lpss_init(void)
1158 {
1159         acpi_scan_add_handler(&lpss_handler);
1160 }
1161
1162 #endif /* CONFIG_X86_INTEL_LPSS */