drivers/cpufreq/speedstep-ich.c

   1 /*
   2  * (C) 2001  Dave Jones, Arjan van de ven.
   3  * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
   4  *
   5  *  Licensed under the terms of the GNU GPL License version 2.
   6  *  Based upon reverse engineered information, and on Intel documentation
   7  *  for chipsets ICH2-M and ICH3-M.
   8  *
   9  *  Many thanks to Ducrot Bruno for finding and fixing the last
  10  *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
  11  *  for extensive testing.
  12  *
  13  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
  14  */
  15
  16
  17 /*********************************************************************
  18  *                        SPEEDSTEP - DEFINITIONS                    *
  19  *********************************************************************/
  20
  21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/init.h>
  26 #include <linux/cpufreq.h>
  27 #include <linux/pci.h>
  28 #include <linux/sched.h>
  29
  30 #include <asm/cpu_device_id.h>
  31
  32 #include "speedstep-lib.h"
  33
  34
  35 /* speedstep_chipset:
  36  *   It is necessary to know which chipset is used. As accesses to
  37  * this device occur at various places in this module, we need a
  38  * static struct pci_dev * pointing to that device.
  39  */
  40 static struct pci_dev *speedstep_chipset_dev;
  41
  42
  43 /* speedstep_processor
  44  */
  45 static enum speedstep_processor speedstep_processor;
  46
  47 static u32 pmbase;
  48
  49 /*
  50  *   There are only two frequency states for each processor. Values
  51  * are in kHz for the time being.
  52  */
  53 static struct cpufreq_frequency_table speedstep_freqs[] = {
  54         {0, SPEEDSTEP_HIGH,     0},
  55         {0, SPEEDSTEP_LOW,      0},
  56         {0, 0,                  CPUFREQ_TABLE_END},
  57 };
  58
  59
  60 /**
  61  * speedstep_find_register - read the PMBASE address
  62  *
  63  * Returns: -ENODEV if no register could be found
  64  */
  65 static int speedstep_find_register(void)
  66 {
  67         if (!speedstep_chipset_dev)
  68                 return -ENODEV;
  69
  70         /* get PMBASE */
  71         pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
  72         if (!(pmbase & 0x01)) {
  73                 pr_err("could not find speedstep register\n");
  74                 return -ENODEV;
  75         }
  76
  77         pmbase &= 0xFFFFFFFE;
  78         if (!pmbase) {
  79                 pr_err("could not find speedstep register\n");
  80                 return -ENODEV;
  81         }
  82
  83         pr_debug("pmbase is 0x%x\n", pmbase);
  84         return 0;
  85 }
  86
  87 /**
  88  * speedstep_set_state - set the SpeedStep state
  89  * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
  90  *
  91  *   Tries to change the SpeedStep state.  Can be called from
  92  *   smp_call_function_single.
  93  */
  94 static void speedstep_set_state(unsigned int state)
  95 {
  96         u8 pm2_blk;
  97         u8 value;
  98         unsigned long flags;
  99
 100         if (state > 0x1)
 101                 return;
 102
 103         /* Disable IRQs */
 104         local_irq_save(flags);
 105
 106         /* read state */
 107         value = inb(pmbase + 0x50);
 108
 109         pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 110
 111         /* write new state */
 112         value &= 0xFE;
 113         value |= state;
 114
 115         pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
 116
 117         /* Disable bus master arbitration */
 118         pm2_blk = inb(pmbase + 0x20);
 119         pm2_blk |= 0x01;
 120         outb(pm2_blk, (pmbase + 0x20));
 121
 122         /* Actual transition */
 123         outb(value, (pmbase + 0x50));
 124
 125         /* Restore bus master arbitration */
 126         pm2_blk &= 0xfe;
 127         outb(pm2_blk, (pmbase + 0x20));
 128
 129         /* check if transition was successful */
 130         value = inb(pmbase + 0x50);
 131
 132         /* Enable IRQs */
 133         local_irq_restore(flags);
 134
 135         pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 136
 137         if (state == (value & 0x1))
 138                 pr_debug("change to %u MHz succeeded\n",
 139                         speedstep_get_frequency(speedstep_processor) / 1000);
 140         else
 141                 pr_err("change failed - I/O error\n");
 142
 143         return;
 144 }
 145
 146 /* Wrapper for smp_call_function_single. */
 147 static void _speedstep_set_state(void *_state)
 148 {
 149         speedstep_set_state(*(unsigned int *)_state);
 150 }
 151
 152 /**
 153  * speedstep_activate - activate SpeedStep control in the chipset
 154  *
 155  *   Tries to activate the SpeedStep status and control registers.
 156  * Returns -EINVAL on an unsupported chipset, and zero on success.
 157  */
 158 static int speedstep_activate(void)
 159 {
 160         u16 value = 0;
 161
 162         if (!speedstep_chipset_dev)
 163                 return -EINVAL;
 164
 165         pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
 166         if (!(value & 0x08)) {
 167                 value |= 0x08;
 168                 pr_debug("activating SpeedStep (TM) registers\n");
 169                 pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
 170         }
 171
 172         return 0;
 173 }
 174
 175
 176 /**
 177  * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
 178  *
 179  *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
 180  * the LPC bridge / PM module which contains all power-management
 181  * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
 182  * chipset, or zero on failure.
 183  */
 184 static unsigned int speedstep_detect_chipset(void)
 185 {
 186         speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 187                               PCI_DEVICE_ID_INTEL_82801DB_12,
 188                               PCI_ANY_ID, PCI_ANY_ID,
 189                               NULL);
 190         if (speedstep_chipset_dev)
 191                 return 4; /* 4-M */
 192
 193         speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 194                               PCI_DEVICE_ID_INTEL_82801CA_12,
 195                               PCI_ANY_ID, PCI_ANY_ID,
 196                               NULL);
 197         if (speedstep_chipset_dev)
 198                 return 3; /* 3-M */
 199
 200
 201         speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 202                               PCI_DEVICE_ID_INTEL_82801BA_10,
 203                               PCI_ANY_ID, PCI_ANY_ID,
 204                               NULL);
 205         if (speedstep_chipset_dev) {
 206                 /* speedstep.c causes lockups on Dell Inspirons 8000 and
 207                  * 8100 which use a pretty old revision of the 82815
 208                  * host bridge. Abort on these systems.
 209                  */
 210                 struct pci_dev *hostbridge;
 211
 212                 hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 213                               PCI_DEVICE_ID_INTEL_82815_MC,
 214                               PCI_ANY_ID, PCI_ANY_ID,
 215                               NULL);
 216
 217                 if (!hostbridge)
 218                         return 2; /* 2-M */
 219
 220                 if (hostbridge->revision < 5) {
 221                         pr_debug("hostbridge does not support speedstep\n");
 222                         speedstep_chipset_dev = NULL;
 223                         pci_dev_put(hostbridge);
 224                         return 0;
 225                 }
 226
 227                 pci_dev_put(hostbridge);
 228                 return 2; /* 2-M */
 229         }
 230
 231         return 0;
 232 }
 233
 234 static void get_freq_data(void *_speed)
 235 {
 236         unsigned int *speed = _speed;
 237
 238         *speed = speedstep_get_frequency(speedstep_processor);
 239 }
 240
 241 static unsigned int speedstep_get(unsigned int cpu)
 242 {
 243         unsigned int speed;
 244
 245         /* You're supposed to ensure CPU is online. */
 246         if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
 247                 BUG();
 248
 249         pr_debug("detected %u kHz as current frequency\n", speed);
 250         return speed;
 251 }
 252
 253 /**
 254  * speedstep_target - set a new CPUFreq policy
 255  * @policy: new policy
 256  * @index: index of target frequency
 257  *
 258  * Sets a new CPUFreq policy.
 259  */
 260 static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
 261 {
 262         unsigned int policy_cpu;
 263
 264         policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
 265
 266         smp_call_function_single(policy_cpu, _speedstep_set_state, &index,
 267                                  true);
 268
 269         return 0;
 270 }
 271
 272
 273 struct get_freqs {
 274         struct cpufreq_policy *policy;
 275         int ret;
 276 };
 277
 278 static void get_freqs_on_cpu(void *_get_freqs)
 279 {
 280         struct get_freqs *get_freqs = _get_freqs;
 281
 282         get_freqs->ret =
 283                 speedstep_get_freqs(speedstep_processor,
 284                             &speedstep_freqs[SPEEDSTEP_LOW].frequency,
 285                             &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
 286                             &get_freqs->policy->cpuinfo.transition_latency,
 287                             &speedstep_set_state);
 288 }
 289
 290 static int speedstep_cpu_init(struct cpufreq_policy *policy)
 291 {
 292         unsigned int policy_cpu;
 293         struct get_freqs gf;
 294
 295         /* only run on CPU to be set, or on its sibling */
 296 #ifdef CONFIG_SMP
 297         cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
 298 #endif
 299         policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
 300
 301         /* detect low and high frequency and transition latency */
 302         gf.policy = policy;
 303         smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
 304         if (gf.ret)
 305                 return gf.ret;
 306
 307         return cpufreq_table_validate_and_show(policy, speedstep_freqs);
 308 }
 309
 310
 311 static struct cpufreq_driver speedstep_driver = {
 312         .name   = "speedstep-ich",
 313         .verify = cpufreq_generic_frequency_table_verify,
 314         .target_index = speedstep_target,
 315         .init   = speedstep_cpu_init,
 316         .get    = speedstep_get,
 317         .attr   = cpufreq_generic_attr,
 318 };
 319
 320 static const struct x86_cpu_id ss_smi_ids[] = {
 321         { X86_VENDOR_INTEL, 6, 0xb, },
 322         { X86_VENDOR_INTEL, 6, 0x8, },
 323         { X86_VENDOR_INTEL, 15, 2 },
 324         {}
 325 };
 326 #if 0
 327 /* Autoload or not? Do not for now. */
 328 MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
 329 #endif
 330
 331 /**
 332  * speedstep_init - initializes the SpeedStep CPUFreq driver
 333  *
 334  *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
 335  * devices, -EINVAL on problems during initiatization, and zero on
 336  * success.
 337  */
 338 static int __init speedstep_init(void)
 339 {
 340         if (!x86_match_cpu(ss_smi_ids))
 341                 return -ENODEV;
 342
 343         /* detect processor */
 344         speedstep_processor = speedstep_detect_processor();
 345         if (!speedstep_processor) {
 346                 pr_debug("Intel(R) SpeedStep(TM) capable processor "
 347                                 "not found\n");
 348                 return -ENODEV;
 349         }
 350
 351         /* detect chipset */
 352         if (!speedstep_detect_chipset()) {
 353                 pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
 354                                 "(yet) available.\n");
 355                 return -ENODEV;
 356         }
 357
 358         /* activate speedstep support */
 359         if (speedstep_activate()) {
 360                 pci_dev_put(speedstep_chipset_dev);
 361                 return -EINVAL;
 362         }
 363
 364         if (speedstep_find_register())
 365                 return -ENODEV;
 366
 367         return cpufreq_register_driver(&speedstep_driver);
 368 }
 369
 370
 371 /**
 372  * speedstep_exit - unregisters SpeedStep support
 373  *
 374  *   Unregisters SpeedStep support.
 375  */
 376 static void __exit speedstep_exit(void)
 377 {
 378         pci_dev_put(speedstep_chipset_dev);
 379         cpufreq_unregister_driver(&speedstep_driver);
 380 }
 381
 382
 383 MODULE_AUTHOR("Dave Jones, Dominik Brodowski <linux@brodo.de>");
 384 MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
 385                 "with ICH-M southbridges.");
 386 MODULE_LICENSE("GPL");
 387
 388 module_init(speedstep_init);
 389 module_exit(speedstep_exit);