2 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
3 * Parts of this file were based on sources as follows:
5 * Copyright (C) 2006-2008 Intel Corporation
6 * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
7 * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
8 * Copyright (C) 2011 Texas Instruments
9 * Copyright (C) 2017 Eric Anholt
11 * This program is free software and is provided to you under the terms of the
12 * GNU General Public License version 2 as published by the Free Software
13 * Foundation, and any use by you of this program is subject to the terms of
16 #include <linux/clk.h>
17 #include <linux/version.h>
18 #include <linux/dma-buf.h>
19 #include <linux/of_graph.h>
22 #include <drm/drm_panel.h>
23 #include <drm/drm_gem_cma_helper.h>
24 #include <drm/drm_gem_framebuffer_helper.h>
25 #include <drm/drm_fb_cma_helper.h>
27 #include "tve200_drm.h"
29 irqreturn_t
tve200_irq(int irq
, void *data
)
31 struct tve200_drm_dev_private
*priv
= data
;
35 stat
= readl(priv
->regs
+ TVE200_INT_STAT
);
43 * The hardware is a bit tilted: the line stays high after clearing
44 * the vblank IRQ, firing many more interrupts. We counter this
45 * by toggling the IRQ back and forth from firing at vblank and
46 * firing at start of active image, which works around the problem
47 * since those occur strictly in sequence, and we get two IRQs for each
48 * frame, one at start of Vblank (that we make call into the CRTC) and
49 * another one at the start of the image (that we discard).
51 if (stat
& TVE200_INT_V_STATUS
) {
52 val
= readl(priv
->regs
+ TVE200_CTRL
);
53 /* We have an actual start of vsync */
54 if (!(val
& TVE200_VSTSTYPE_BITS
)) {
55 drm_crtc_handle_vblank(&priv
->pipe
.crtc
);
56 /* Toggle trigger to start of active image */
57 val
|= TVE200_VSTSTYPE_VAI
;
59 /* Toggle trigger back to start of vsync */
60 val
&= ~TVE200_VSTSTYPE_BITS
;
62 writel(val
, priv
->regs
+ TVE200_CTRL
);
64 dev_err(priv
->drm
->dev
, "stray IRQ %08x\n", stat
);
66 /* Clear the interrupt once done */
67 writel(stat
, priv
->regs
+ TVE200_INT_CLR
);
72 static int tve200_display_check(struct drm_simple_display_pipe
*pipe
,
73 struct drm_plane_state
*pstate
,
74 struct drm_crtc_state
*cstate
)
76 const struct drm_display_mode
*mode
= &cstate
->mode
;
77 struct drm_framebuffer
*old_fb
= pipe
->plane
.state
->fb
;
78 struct drm_framebuffer
*fb
= pstate
->fb
;
81 * We support these specific resolutions and nothing else.
83 if (!(mode
->hdisplay
== 352 && mode
->vdisplay
== 240) && /* SIF(525) */
84 !(mode
->hdisplay
== 352 && mode
->vdisplay
== 288) && /* CIF(625) */
85 !(mode
->hdisplay
== 640 && mode
->vdisplay
== 480) && /* VGA */
86 !(mode
->hdisplay
== 720 && mode
->vdisplay
== 480) && /* D1 */
87 !(mode
->hdisplay
== 720 && mode
->vdisplay
== 576)) { /* D1 */
88 DRM_DEBUG_KMS("unsupported display mode (%u x %u)\n",
89 mode
->hdisplay
, mode
->vdisplay
);
94 u32 offset
= drm_fb_cma_get_gem_addr(fb
, pstate
, 0);
96 /* FB base address must be dword aligned. */
98 DRM_DEBUG_KMS("FB not 32-bit aligned\n");
103 * There's no pitch register, the mode's hdisplay
106 if (fb
->pitches
[0] != mode
->hdisplay
* fb
->format
->cpp
[0]) {
107 DRM_DEBUG_KMS("can't handle pitches\n");
112 * We can't change the FB format in a flicker-free
113 * manner (and only update it during CRTC enable).
115 if (old_fb
&& old_fb
->format
!= fb
->format
)
116 cstate
->mode_changed
= true;
122 static void tve200_display_enable(struct drm_simple_display_pipe
*pipe
,
123 struct drm_crtc_state
*cstate
)
125 struct drm_crtc
*crtc
= &pipe
->crtc
;
126 struct drm_plane
*plane
= &pipe
->plane
;
127 struct drm_device
*drm
= crtc
->dev
;
128 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
129 const struct drm_display_mode
*mode
= &cstate
->mode
;
130 struct drm_framebuffer
*fb
= plane
->state
->fb
;
131 struct drm_connector
*connector
= priv
->connector
;
132 u32 format
= fb
->format
->format
;
135 clk_prepare_enable(priv
->clk
);
138 ctrl1
|= TVE200_CTRL_CSMODE
;
139 /* Interlace mode for CCIR656: parameterize? */
140 ctrl1
|= TVE200_CTRL_NONINTERLACE
;
141 /* 32 words per burst */
142 ctrl1
|= TVE200_CTRL_BURST_32_WORDS
;
144 ctrl1
|= TVE200_CTRL_RETRYCNT_16
;
145 /* NTSC mode: parametrize? */
146 ctrl1
|= TVE200_CTRL_NTSC
;
148 /* Vsync IRQ at start of Vsync at first */
149 ctrl1
|= TVE200_VSTSTYPE_VSYNC
;
151 if (connector
->display_info
.bus_flags
& DRM_BUS_FLAG_PIXDATA_NEGEDGE
)
152 ctrl1
|= TVE200_CTRL_TVCLKP
;
154 if ((mode
->hdisplay
== 352 && mode
->vdisplay
== 240) || /* SIF(525) */
155 (mode
->hdisplay
== 352 && mode
->vdisplay
== 288)) { /* CIF(625) */
156 ctrl1
|= TVE200_CTRL_IPRESOL_CIF
;
157 dev_info(drm
->dev
, "CIF mode\n");
158 } else if (mode
->hdisplay
== 640 && mode
->vdisplay
== 480) {
159 ctrl1
|= TVE200_CTRL_IPRESOL_VGA
;
160 dev_info(drm
->dev
, "VGA mode\n");
161 } else if ((mode
->hdisplay
== 720 && mode
->vdisplay
== 480) ||
162 (mode
->hdisplay
== 720 && mode
->vdisplay
== 576)) {
163 ctrl1
|= TVE200_CTRL_IPRESOL_D1
;
164 dev_info(drm
->dev
, "D1 mode\n");
167 if (format
& DRM_FORMAT_BIG_ENDIAN
) {
168 ctrl1
|= TVE200_CTRL_BBBP
;
169 format
&= ~DRM_FORMAT_BIG_ENDIAN
;
173 case DRM_FORMAT_XRGB8888
:
174 ctrl1
|= TVE200_IPDMOD_RGB888
;
176 case DRM_FORMAT_RGB565
:
177 ctrl1
|= TVE200_IPDMOD_RGB565
;
179 case DRM_FORMAT_XRGB1555
:
180 ctrl1
|= TVE200_IPDMOD_RGB555
;
182 case DRM_FORMAT_XBGR8888
:
183 ctrl1
|= TVE200_IPDMOD_RGB888
| TVE200_BGR
;
185 case DRM_FORMAT_BGR565
:
186 ctrl1
|= TVE200_IPDMOD_RGB565
| TVE200_BGR
;
188 case DRM_FORMAT_XBGR1555
:
189 ctrl1
|= TVE200_IPDMOD_RGB555
| TVE200_BGR
;
191 case DRM_FORMAT_YUYV
:
192 ctrl1
|= TVE200_IPDMOD_YUV422
;
193 ctrl1
|= TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0
;
195 case DRM_FORMAT_YVYU
:
196 ctrl1
|= TVE200_IPDMOD_YUV422
;
197 ctrl1
|= TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0
;
199 case DRM_FORMAT_UYVY
:
200 ctrl1
|= TVE200_IPDMOD_YUV422
;
201 ctrl1
|= TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0
;
203 case DRM_FORMAT_VYUY
:
204 ctrl1
|= TVE200_IPDMOD_YUV422
;
205 ctrl1
|= TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0
;
207 case DRM_FORMAT_YUV420
:
208 ctrl1
|= TVE200_CTRL_YUV420
;
209 ctrl1
|= TVE200_IPDMOD_YUV420
;
212 dev_err(drm
->dev
, "Unknown FB format 0x%08x\n",
217 ctrl1
|= TVE200_TVEEN
;
220 writel(ctrl1
, priv
->regs
+ TVE200_CTRL
);
222 drm_crtc_vblank_on(crtc
);
225 static void tve200_display_disable(struct drm_simple_display_pipe
*pipe
)
227 struct drm_crtc
*crtc
= &pipe
->crtc
;
228 struct drm_device
*drm
= crtc
->dev
;
229 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
231 drm_crtc_vblank_off(crtc
);
233 /* Disable and Power Down */
234 writel(0, priv
->regs
+ TVE200_CTRL
);
236 clk_disable_unprepare(priv
->clk
);
239 static void tve200_display_update(struct drm_simple_display_pipe
*pipe
,
240 struct drm_plane_state
*old_pstate
)
242 struct drm_crtc
*crtc
= &pipe
->crtc
;
243 struct drm_device
*drm
= crtc
->dev
;
244 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
245 struct drm_pending_vblank_event
*event
= crtc
->state
->event
;
246 struct drm_plane
*plane
= &pipe
->plane
;
247 struct drm_plane_state
*pstate
= plane
->state
;
248 struct drm_framebuffer
*fb
= pstate
->fb
;
251 /* For RGB, the Y component is used as base address */
252 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 0),
253 priv
->regs
+ TVE200_Y_FRAME_BASE_ADDR
);
255 /* For three plane YUV we need two more addresses */
256 if (fb
->format
->format
== DRM_FORMAT_YUV420
) {
257 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 1),
258 priv
->regs
+ TVE200_U_FRAME_BASE_ADDR
);
259 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 2),
260 priv
->regs
+ TVE200_V_FRAME_BASE_ADDR
);
265 crtc
->state
->event
= NULL
;
267 spin_lock_irq(&crtc
->dev
->event_lock
);
268 if (crtc
->state
->active
&& drm_crtc_vblank_get(crtc
) == 0)
269 drm_crtc_arm_vblank_event(crtc
, event
);
271 drm_crtc_send_vblank_event(crtc
, event
);
272 spin_unlock_irq(&crtc
->dev
->event_lock
);
276 int tve200_enable_vblank(struct drm_device
*drm
, unsigned int crtc
)
278 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
280 writel(TVE200_INT_V_STATUS
, priv
->regs
+ TVE200_INT_EN
);
284 void tve200_disable_vblank(struct drm_device
*drm
, unsigned int crtc
)
286 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
288 writel(0, priv
->regs
+ TVE200_INT_EN
);
291 static int tve200_display_prepare_fb(struct drm_simple_display_pipe
*pipe
,
292 struct drm_plane_state
*plane_state
)
294 return drm_gem_fb_prepare_fb(&pipe
->plane
, plane_state
);
297 static const struct drm_simple_display_pipe_funcs tve200_display_funcs
= {
298 .check
= tve200_display_check
,
299 .enable
= tve200_display_enable
,
300 .disable
= tve200_display_disable
,
301 .update
= tve200_display_update
,
302 .prepare_fb
= tve200_display_prepare_fb
,
305 int tve200_display_init(struct drm_device
*drm
)
307 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
309 static const u32 formats
[] = {
317 * The controller actually supports any YCbCr ordering,
318 * for packed YCbCr. This just lists the orderings that
325 /* This uses three planes */
329 ret
= drm_simple_display_pipe_init(drm
, &priv
->pipe
,
330 &tve200_display_funcs
,
331 formats
, ARRAY_SIZE(formats
),