2 * Driver for Zarlink DVB-T MT352 demodulator
4 * Written by Holger Waechtler <holger@qanu.de>
5 * and Daniel Mack <daniel@qanu.de>
7 * AVerMedia AVerTV DVB-T 771 support by
8 * Wolfram Joost <dbox2@frokaschwei.de>
10 * Support for Samsung TDTC9251DH01C(M) tuner
11 * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
12 * Amauri Celani <acelani@essegi.net>
14 * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
15 * Christopher Pascoe <c.pascoe@itee.uq.edu.au>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License as published by
19 * the Free Software Foundation; either version 2 of the License, or
20 * (at your option) any later version.
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/delay.h>
33 #include <linux/string.h>
34 #include <linux/slab.h>
36 #include <media/dvb_frontend.h>
37 #include "mt352_priv.h"
41 struct i2c_adapter
* i2c
;
42 struct dvb_frontend frontend
;
44 /* configuration settings */
45 struct mt352_config config
;
49 #define dprintk(args...) \
51 if (debug) printk(KERN_DEBUG "mt352: " args); \
54 static int mt352_single_write(struct dvb_frontend
*fe
, u8 reg
, u8 val
)
56 struct mt352_state
* state
= fe
->demodulator_priv
;
57 u8 buf
[2] = { reg
, val
};
58 struct i2c_msg msg
= { .addr
= state
->config
.demod_address
, .flags
= 0,
59 .buf
= buf
, .len
= 2 };
60 int err
= i2c_transfer(state
->i2c
, &msg
, 1);
62 printk("mt352_write() to reg %x failed (err = %d)!\n", reg
, err
);
68 static int _mt352_write(struct dvb_frontend
* fe
, const u8 ibuf
[], int ilen
)
71 for (i
=0; i
< ilen
-1; i
++)
72 if ((err
= mt352_single_write(fe
,ibuf
[0]+i
,ibuf
[i
+1])))
78 static int mt352_read_register(struct mt352_state
* state
, u8 reg
)
83 struct i2c_msg msg
[] = { { .addr
= state
->config
.demod_address
,
85 .buf
= b0
, .len
= 1 },
86 { .addr
= state
->config
.demod_address
,
88 .buf
= b1
, .len
= 1 } };
90 ret
= i2c_transfer(state
->i2c
, msg
, 2);
93 printk("%s: readreg error (reg=%d, ret==%i)\n",
101 static int mt352_sleep(struct dvb_frontend
* fe
)
103 static u8 mt352_softdown
[] = { CLOCK_CTL
, 0x20, 0x08 };
105 _mt352_write(fe
, mt352_softdown
, sizeof(mt352_softdown
));
109 static void mt352_calc_nominal_rate(struct mt352_state
* state
,
113 u32 adc_clock
= 20480; /* 20.340 MHz */
128 if (state
->config
.adc_clock
)
129 adc_clock
= state
->config
.adc_clock
;
131 value
= 64 * bw
* (1<<16) / (7 * 8);
132 value
= value
* 1000 / adc_clock
;
133 dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
134 __func__
, bw
, adc_clock
, value
);
139 static void mt352_calc_input_freq(struct mt352_state
* state
,
142 int adc_clock
= 20480; /* 20.480000 MHz */
143 int if2
= 36167; /* 36.166667 MHz */
146 if (state
->config
.adc_clock
)
147 adc_clock
= state
->config
.adc_clock
;
148 if (state
->config
.if2
)
149 if2
= state
->config
.if2
;
151 if (adc_clock
>= if2
* 2)
154 ife
= adc_clock
- (if2
% adc_clock
);
155 if (ife
> adc_clock
/ 2)
156 ife
= adc_clock
- ife
;
158 value
= -16374 * ife
/ adc_clock
;
159 dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
160 __func__
, if2
, ife
, adc_clock
, value
, value
& 0x3fff);
165 static int mt352_set_parameters(struct dvb_frontend
*fe
)
167 struct dtv_frontend_properties
*op
= &fe
->dtv_property_cache
;
168 struct mt352_state
* state
= fe
->demodulator_priv
;
169 unsigned char buf
[13];
170 static unsigned char tuner_go
[] = { 0x5d, 0x01 };
171 static unsigned char fsm_go
[] = { 0x5e, 0x01 };
172 unsigned int tps
= 0;
174 switch (op
->code_rate_HP
) {
194 switch (op
->code_rate_LP
) {
211 if (op
->hierarchy
== HIERARCHY_AUTO
||
212 op
->hierarchy
== HIERARCHY_NONE
)
219 switch (op
->modulation
) {
233 switch (op
->transmission_mode
) {
234 case TRANSMISSION_MODE_2K
:
235 case TRANSMISSION_MODE_AUTO
:
237 case TRANSMISSION_MODE_8K
:
244 switch (op
->guard_interval
) {
245 case GUARD_INTERVAL_1_32
:
246 case GUARD_INTERVAL_AUTO
:
248 case GUARD_INTERVAL_1_16
:
251 case GUARD_INTERVAL_1_8
:
254 case GUARD_INTERVAL_1_4
:
261 switch (op
->hierarchy
) {
279 buf
[0] = TPS_GIVEN_1
; /* TPS_GIVEN_1 and following registers */
281 buf
[1] = msb(tps
); /* TPS_GIVEN_(1|0) */
284 buf
[3] = 0x50; // old
285 // buf[3] = 0xf4; // pinnacle
287 mt352_calc_nominal_rate(state
, op
->bandwidth_hz
, buf
+4);
288 mt352_calc_input_freq(state
, buf
+6);
290 if (state
->config
.no_tuner
) {
291 if (fe
->ops
.tuner_ops
.set_params
) {
292 fe
->ops
.tuner_ops
.set_params(fe
);
293 if (fe
->ops
.i2c_gate_ctrl
)
294 fe
->ops
.i2c_gate_ctrl(fe
, 0);
297 _mt352_write(fe
, buf
, 8);
298 _mt352_write(fe
, fsm_go
, 2);
300 if (fe
->ops
.tuner_ops
.calc_regs
) {
301 fe
->ops
.tuner_ops
.calc_regs(fe
, buf
+8, 5);
303 _mt352_write(fe
, buf
, sizeof(buf
));
304 _mt352_write(fe
, tuner_go
, 2);
311 static int mt352_get_parameters(struct dvb_frontend
* fe
,
312 struct dtv_frontend_properties
*op
)
314 struct mt352_state
* state
= fe
->demodulator_priv
;
318 static const u8 tps_fec_to_api
[8] =
330 if ( (mt352_read_register(state
,0x00) & 0xC0) != 0xC0 )
333 /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
334 * the mt352 sometimes works with the wrong parameters
336 tps
= (mt352_read_register(state
, TPS_RECEIVED_1
) << 8) | mt352_read_register(state
, TPS_RECEIVED_0
);
337 div
= (mt352_read_register(state
, CHAN_START_1
) << 8) | mt352_read_register(state
, CHAN_START_0
);
338 trl
= mt352_read_register(state
, TRL_NOMINAL_RATE_1
);
340 op
->code_rate_HP
= tps_fec_to_api
[(tps
>> 7) & 7];
341 op
->code_rate_LP
= tps_fec_to_api
[(tps
>> 4) & 7];
343 switch ( (tps
>> 13) & 3)
346 op
->modulation
= QPSK
;
349 op
->modulation
= QAM_16
;
352 op
->modulation
= QAM_64
;
355 op
->modulation
= QAM_AUTO
;
359 op
->transmission_mode
= (tps
& 0x01) ? TRANSMISSION_MODE_8K
: TRANSMISSION_MODE_2K
;
361 switch ( (tps
>> 2) & 3)
364 op
->guard_interval
= GUARD_INTERVAL_1_32
;
367 op
->guard_interval
= GUARD_INTERVAL_1_16
;
370 op
->guard_interval
= GUARD_INTERVAL_1_8
;
373 op
->guard_interval
= GUARD_INTERVAL_1_4
;
376 op
->guard_interval
= GUARD_INTERVAL_AUTO
;
380 switch ( (tps
>> 10) & 7)
383 op
->hierarchy
= HIERARCHY_NONE
;
386 op
->hierarchy
= HIERARCHY_1
;
389 op
->hierarchy
= HIERARCHY_2
;
392 op
->hierarchy
= HIERARCHY_4
;
395 op
->hierarchy
= HIERARCHY_AUTO
;
399 op
->frequency
= (500 * (div
- IF_FREQUENCYx6
)) / 3 * 1000;
402 op
->bandwidth_hz
= 8000000;
403 else if (trl
== 0x64)
404 op
->bandwidth_hz
= 7000000;
406 op
->bandwidth_hz
= 6000000;
409 if (mt352_read_register(state
, STATUS_2
) & 0x02)
410 op
->inversion
= INVERSION_OFF
;
412 op
->inversion
= INVERSION_ON
;
417 static int mt352_read_status(struct dvb_frontend
*fe
, enum fe_status
*status
)
419 struct mt352_state
* state
= fe
->demodulator_priv
;
424 * The MT352 design manual from Zarlink states (page 46-47):
426 * Notes about the TUNER_GO register:
428 * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
429 * byte is copied from the tuner to the STATUS_3 register and
430 * completion of the read operation is indicated by bit-5 of the
431 * INTERRUPT_3 register.
434 if ((s0
= mt352_read_register(state
, STATUS_0
)) < 0)
436 if ((s1
= mt352_read_register(state
, STATUS_1
)) < 0)
438 if ((s3
= mt352_read_register(state
, STATUS_3
)) < 0)
443 *status
|= FE_HAS_CARRIER
;
445 *status
|= FE_HAS_VITERBI
;
447 *status
|= FE_HAS_LOCK
;
449 *status
|= FE_HAS_SYNC
;
451 *status
|= FE_HAS_SIGNAL
;
453 if ((*status
& (FE_HAS_CARRIER
| FE_HAS_VITERBI
| FE_HAS_SYNC
)) !=
454 (FE_HAS_CARRIER
| FE_HAS_VITERBI
| FE_HAS_SYNC
))
455 *status
&= ~FE_HAS_LOCK
;
460 static int mt352_read_ber(struct dvb_frontend
* fe
, u32
* ber
)
462 struct mt352_state
* state
= fe
->demodulator_priv
;
464 *ber
= (mt352_read_register (state
, RS_ERR_CNT_2
) << 16) |
465 (mt352_read_register (state
, RS_ERR_CNT_1
) << 8) |
466 (mt352_read_register (state
, RS_ERR_CNT_0
));
471 static int mt352_read_signal_strength(struct dvb_frontend
* fe
, u16
* strength
)
473 struct mt352_state
* state
= fe
->demodulator_priv
;
475 /* align the 12 bit AGC gain with the most significant bits */
476 u16 signal
= ((mt352_read_register(state
, AGC_GAIN_1
) & 0x0f) << 12) |
477 (mt352_read_register(state
, AGC_GAIN_0
) << 4);
479 /* inverse of gain is signal strength */
484 static int mt352_read_snr(struct dvb_frontend
* fe
, u16
* snr
)
486 struct mt352_state
* state
= fe
->demodulator_priv
;
488 u8 _snr
= mt352_read_register (state
, SNR
);
489 *snr
= (_snr
<< 8) | _snr
;
494 static int mt352_read_ucblocks(struct dvb_frontend
* fe
, u32
* ucblocks
)
496 struct mt352_state
* state
= fe
->demodulator_priv
;
498 *ucblocks
= (mt352_read_register (state
, RS_UBC_1
) << 8) |
499 (mt352_read_register (state
, RS_UBC_0
));
504 static int mt352_get_tune_settings(struct dvb_frontend
* fe
, struct dvb_frontend_tune_settings
* fe_tune_settings
)
506 fe_tune_settings
->min_delay_ms
= 800;
507 fe_tune_settings
->step_size
= 0;
508 fe_tune_settings
->max_drift
= 0;
513 static int mt352_init(struct dvb_frontend
* fe
)
515 struct mt352_state
* state
= fe
->demodulator_priv
;
517 static u8 mt352_reset_attach
[] = { RESET
, 0xC0 };
519 dprintk("%s: hello\n",__func__
);
521 if ((mt352_read_register(state
, CLOCK_CTL
) & 0x10) == 0 ||
522 (mt352_read_register(state
, CONFIG
) & 0x20) == 0) {
524 /* Do a "hard" reset */
525 _mt352_write(fe
, mt352_reset_attach
, sizeof(mt352_reset_attach
));
526 return state
->config
.demod_init(fe
);
532 static void mt352_release(struct dvb_frontend
* fe
)
534 struct mt352_state
* state
= fe
->demodulator_priv
;
538 static const struct dvb_frontend_ops mt352_ops
;
540 struct dvb_frontend
* mt352_attach(const struct mt352_config
* config
,
541 struct i2c_adapter
* i2c
)
543 struct mt352_state
* state
= NULL
;
545 /* allocate memory for the internal state */
546 state
= kzalloc(sizeof(struct mt352_state
), GFP_KERNEL
);
547 if (state
== NULL
) goto error
;
549 /* setup the state */
551 memcpy(&state
->config
,config
,sizeof(struct mt352_config
));
553 /* check if the demod is there */
554 if (mt352_read_register(state
, CHIP_ID
) != ID_MT352
) goto error
;
556 /* create dvb_frontend */
557 memcpy(&state
->frontend
.ops
, &mt352_ops
, sizeof(struct dvb_frontend_ops
));
558 state
->frontend
.demodulator_priv
= state
;
559 return &state
->frontend
;
566 static const struct dvb_frontend_ops mt352_ops
= {
567 .delsys
= { SYS_DVBT
},
569 .name
= "Zarlink MT352 DVB-T",
570 .frequency_min
= 174000000,
571 .frequency_max
= 862000000,
572 .frequency_stepsize
= 166667,
573 .frequency_tolerance
= 0,
574 .caps
= FE_CAN_FEC_1_2
| FE_CAN_FEC_2_3
|
575 FE_CAN_FEC_3_4
| FE_CAN_FEC_5_6
| FE_CAN_FEC_7_8
|
577 FE_CAN_QPSK
| FE_CAN_QAM_16
| FE_CAN_QAM_64
| FE_CAN_QAM_AUTO
|
578 FE_CAN_TRANSMISSION_MODE_AUTO
| FE_CAN_GUARD_INTERVAL_AUTO
|
579 FE_CAN_HIERARCHY_AUTO
| FE_CAN_RECOVER
|
583 .release
= mt352_release
,
586 .sleep
= mt352_sleep
,
587 .write
= _mt352_write
,
589 .set_frontend
= mt352_set_parameters
,
590 .get_frontend
= mt352_get_parameters
,
591 .get_tune_settings
= mt352_get_tune_settings
,
593 .read_status
= mt352_read_status
,
594 .read_ber
= mt352_read_ber
,
595 .read_signal_strength
= mt352_read_signal_strength
,
596 .read_snr
= mt352_read_snr
,
597 .read_ucblocks
= mt352_read_ucblocks
,
600 module_param(debug
, int, 0644);
601 MODULE_PARM_DESC(debug
, "Turn on/off frontend debugging (default:off).");
603 MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver");
604 MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso");
605 MODULE_LICENSE("GPL");
607 EXPORT_SYMBOL(mt352_attach
);