2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-controls.h"
57 #include "ivtv-gpio.h"
58 #include <linux/dma-mapping.h>
59 #include <media/tveeprom.h>
60 #include <media/i2c/saa7115.h>
61 #include "tuner-xc2028.h"
62 #include <uapi/linux/sched/types.h>
64 /* If you have already X v4l cards, then set this to X. This way
65 the device numbers stay matched. Example: you have a WinTV card
66 without radio and a PVR-350 with. Normally this would give a
67 video1 device together with a radio0 device for the PVR. By
68 setting this to 1 you ensure that radio0 is now also radio1. */
71 /* Callback for registering extensions */
72 int (*ivtv_ext_init
)(struct ivtv
*);
73 EXPORT_SYMBOL(ivtv_ext_init
);
75 /* add your revision and whatnot here */
76 static const struct pci_device_id ivtv_pci_tbl
[] = {
77 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
78 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
79 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
80 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
84 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
86 /* ivtv instance counter */
87 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
89 /* Parameter declarations */
90 static int cardtype
[IVTV_MAX_CARDS
];
91 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1,
94 -1, -1, -1, -1, -1, -1, -1, -1 };
95 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1,
98 -1, -1, -1, -1, -1, -1, -1, -1 };
99 static int i2c_clock_period
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
100 -1, -1, -1, -1, -1, -1, -1, -1,
101 -1, -1, -1, -1, -1, -1, -1, -1,
102 -1, -1, -1, -1, -1, -1, -1, -1 };
104 static unsigned int cardtype_c
= 1;
105 static unsigned int tuner_c
= 1;
106 static int radio_c
= 1;
107 static unsigned int i2c_clock_period_c
= 1;
108 static char pal
[] = "---";
109 static char secam
[] = "--";
110 static char ntsc
[] = "-";
114 /* DMA Buffers, Default size in MB allocated */
115 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
116 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
117 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
118 /* Exception: size in kB for this stream (MB is overkill) */
119 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
120 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
121 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
122 /* Exception: size in kB for this stream (MB is way overkill) */
123 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
125 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
126 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
127 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
128 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
129 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
130 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
131 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
133 static int ivtv_yuv_mode
;
134 static int ivtv_yuv_threshold
= -1;
135 static int ivtv_pci_latency
= 1;
138 #ifdef CONFIG_VIDEO_ADV_DEBUG
142 static int tunertype
= -1;
143 static int newi2c
= -1;
145 module_param_array(tuner
, int, &tuner_c
, 0644);
146 module_param_array(radio
, int, &radio_c
, 0644);
147 module_param_array(cardtype
, int, &cardtype_c
, 0644);
148 module_param_string(pal
, pal
, sizeof(pal
), 0644);
149 module_param_string(secam
, secam
, sizeof(secam
), 0644);
150 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
151 module_param_named(debug
,ivtv_debug
, int, 0644);
152 #ifdef CONFIG_VIDEO_ADV_DEBUG
153 module_param_named(fw_debug
, ivtv_fw_debug
, int, 0644);
155 module_param(ivtv_pci_latency
, int, 0644);
156 module_param(ivtv_yuv_mode
, int, 0644);
157 module_param(ivtv_yuv_threshold
, int, 0644);
158 module_param(ivtv_first_minor
, int, 0644);
160 module_param(enc_mpg_buffers
, int, 0644);
161 module_param(enc_yuv_buffers
, int, 0644);
162 module_param(enc_vbi_buffers
, int, 0644);
163 module_param(enc_pcm_buffers
, int, 0644);
164 module_param(dec_mpg_buffers
, int, 0644);
165 module_param(dec_yuv_buffers
, int, 0644);
166 module_param(dec_vbi_buffers
, int, 0644);
168 module_param(tunertype
, int, 0644);
169 module_param(newi2c
, int, 0644);
170 module_param_array(i2c_clock_period
, int, &i2c_clock_period_c
, 0644);
172 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
173 "\t\t\tsee tuner.h for values");
174 MODULE_PARM_DESC(radio
,
175 "Enable or disable the radio. Use only if autodetection\n"
176 "\t\t\tfails. 0 = disable, 1 = enable");
177 MODULE_PARM_DESC(cardtype
,
178 "Only use this option if your card is not detected properly.\n"
179 "\t\tSpecify card type:\n"
180 "\t\t\t 1 = WinTV PVR 250\n"
181 "\t\t\t 2 = WinTV PVR 350\n"
182 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
183 "\t\t\t 4 = AVerMedia M179\n"
184 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
185 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
186 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
187 "\t\t\t 8 = Adaptec AVC-2410\n"
188 "\t\t\t 9 = Adaptec AVC-2010\n"
189 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
190 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
191 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
192 "\t\t\t13 = I/O Data GV-MVP/RX\n"
193 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
194 "\t\t\t15 = GOTVIEW PCI DVD\n"
195 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
196 "\t\t\t17 = Yuan MPC622\n"
197 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
198 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
199 "\t\t\t20 = Club3D ZAP-TV1x01\n"
200 "\t\t\t21 = AverTV MCE 116 Plus\n"
201 "\t\t\t22 = ASUS Falcon2\n"
202 "\t\t\t23 = AverMedia PVR-150 Plus\n"
203 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
204 "\t\t\t25 = AverMedia M104 (not yet working)\n"
205 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
206 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
207 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
208 "\t\t\t 0 = Autodetect (default)\n"
209 "\t\t\t-1 = Ignore this card\n\t\t");
210 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
211 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
212 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
213 MODULE_PARM_DESC(tunertype
,
214 "Specify tuner type:\n"
215 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
216 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
217 "\t\t\t-1 = Autodetect (default)\n");
218 MODULE_PARM_DESC(debug
,
219 "Debug level (bitmask). Default: 0\n"
220 "\t\t\t 1/0x0001: warning\n"
221 "\t\t\t 2/0x0002: info\n"
222 "\t\t\t 4/0x0004: mailbox\n"
223 "\t\t\t 8/0x0008: ioctl\n"
224 "\t\t\t 16/0x0010: file\n"
225 "\t\t\t 32/0x0020: dma\n"
226 "\t\t\t 64/0x0040: irq\n"
227 "\t\t\t 128/0x0080: decoder\n"
228 "\t\t\t 256/0x0100: yuv\n"
229 "\t\t\t 512/0x0200: i2c\n"
230 "\t\t\t1024/0x0400: high volume\n");
231 #ifdef CONFIG_VIDEO_ADV_DEBUG
232 MODULE_PARM_DESC(fw_debug
,
233 "Enable code for debugging firmware problems. Default: 0\n");
235 MODULE_PARM_DESC(ivtv_pci_latency
,
236 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
237 "\t\t\tDefault: Yes");
238 MODULE_PARM_DESC(ivtv_yuv_mode
,
239 "Specify the yuv playback mode:\n"
240 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
241 "\t\t\tDefault: 0 (interlaced)");
242 MODULE_PARM_DESC(ivtv_yuv_threshold
,
243 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
244 "\t\t\tDefault: 480");
245 MODULE_PARM_DESC(enc_mpg_buffers
,
246 "Encoder MPG Buffers (in MB)\n"
247 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
248 MODULE_PARM_DESC(enc_yuv_buffers
,
249 "Encoder YUV Buffers (in MB)\n"
250 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
251 MODULE_PARM_DESC(enc_vbi_buffers
,
252 "Encoder VBI Buffers (in MB)\n"
253 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
254 MODULE_PARM_DESC(enc_pcm_buffers
,
255 "Encoder PCM buffers (in kB)\n"
256 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
257 MODULE_PARM_DESC(dec_mpg_buffers
,
258 "Decoder MPG buffers (in MB)\n"
259 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
260 MODULE_PARM_DESC(dec_yuv_buffers
,
261 "Decoder YUV buffers (in MB)\n"
262 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
263 MODULE_PARM_DESC(dec_vbi_buffers
,
264 "Decoder VBI buffers (in kB)\n"
265 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
266 MODULE_PARM_DESC(newi2c
,
267 "Use new I2C implementation\n"
268 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
269 "\t\t\tDefault is autodetect");
270 MODULE_PARM_DESC(i2c_clock_period
,
271 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
272 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
273 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD
));
275 MODULE_PARM_DESC(ivtv_first_minor
, "Set device node number assigned to first card");
277 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
278 MODULE_DESCRIPTION("CX23415/CX23416 driver");
279 MODULE_SUPPORTED_DEVICE
280 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
281 "\t\t\tYuan MPG series and similar)");
282 MODULE_LICENSE("GPL");
284 MODULE_VERSION(IVTV_VERSION
);
286 #if defined(CONFIG_MODULES) && defined(MODULE)
287 static void request_module_async(struct work_struct
*work
)
289 struct ivtv
*dev
= container_of(work
, struct ivtv
, request_module_wk
);
291 /* Make sure ivtv-alsa module is loaded */
292 request_module("ivtv-alsa");
294 /* Initialize ivtv-alsa for this instance of the cx18 device */
295 if (ivtv_ext_init
!= NULL
)
299 static void request_modules(struct ivtv
*dev
)
301 INIT_WORK(&dev
->request_module_wk
, request_module_async
);
302 schedule_work(&dev
->request_module_wk
);
305 static void flush_request_modules(struct ivtv
*dev
)
307 flush_work(&dev
->request_module_wk
);
310 #define request_modules(dev)
311 #define flush_request_modules(dev)
312 #endif /* CONFIG_MODULES */
314 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
316 itv
->irqmask
&= ~mask
;
317 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
320 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
322 itv
->irqmask
|= mask
;
323 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
326 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
330 spin_lock(&itv
->lock
);
331 old_mode
= itv
->output_mode
;
333 itv
->output_mode
= old_mode
= mode
;
334 spin_unlock(&itv
->lock
);
338 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
340 switch (itv
->output_mode
) {
342 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
344 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
350 int ivtv_waitq(wait_queue_head_t
*waitq
)
354 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
356 finish_wait(waitq
, &wait
);
357 return signal_pending(current
) ? -EINTR
: 0;
360 /* Generic utility functions */
361 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
363 int timeout
= msecs_to_jiffies(msecs
);
366 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
367 timeout
= schedule_timeout(timeout
);
369 int ret
= signal_pending(current
);
378 /* Release ioremapped memory */
379 static void ivtv_iounmap(struct ivtv
*itv
)
384 /* Release registers memory */
385 if (itv
->reg_mem
!= NULL
) {
386 IVTV_DEBUG_INFO("releasing reg_mem\n");
387 iounmap(itv
->reg_mem
);
390 /* Release io memory */
391 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
392 IVTV_DEBUG_INFO("releasing dec_mem\n");
393 iounmap(itv
->dec_mem
);
397 /* Release io memory */
398 if (itv
->enc_mem
!= NULL
) {
399 IVTV_DEBUG_INFO("releasing enc_mem\n");
400 iounmap(itv
->enc_mem
);
405 /* Hauppauge card? get values from tveeprom */
406 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
410 itv
->i2c_client
.addr
= 0xA0 >> 1;
411 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
412 tveeprom_hauppauge_analog(tv
, eedata
);
415 static void ivtv_process_eeprom(struct ivtv
*itv
)
418 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
420 ivtv_read_eeprom(itv
, &tv
);
422 /* Many thanks to Steven Toth from Hauppauge for providing the
425 /* In a few cases the PCI subsystem IDs do not correctly
426 identify the card. A better method is to check the
427 model number from the eeprom instead. */
428 case 30012 ... 30039: /* Low profile PVR250 */
429 case 32000 ... 32999:
430 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
431 case 48400 ... 48599:
432 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
434 case 48100 ... 48399:
435 case 48600 ... 48999:
436 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
438 case 23000 ... 23999: /* PVR500 */
439 case 25000 ... 25999: /* Low profile PVR150 */
440 case 26000 ... 26999: /* Regular PVR150 */
441 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
444 IVTV_ERR("Invalid EEPROM\n");
447 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
448 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
453 /* Old style PVR350 (with an saa7114) uses this input for
456 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
462 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
463 itv
->card_name
= itv
->card
->name
;
464 itv
->card_i2c
= itv
->card
->i2c
;
466 /* If this is a PVR500 then it should be possible to detect whether it is the
467 first or second unit by looking at the subsystem device ID: is bit 4 is
468 set, then it is the second unit (according to info from Hauppauge).
470 However, while this works for most cards, I have seen a few PVR500 cards
471 where both units have the same subsystem ID.
473 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
474 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
475 it is the second unit. It is possible that it is a different slot when ivtv is
476 used in Xen, in that case I ignore this card here. The worst that can happen
477 is that the card presents itself with a non-working radio device.
479 This detection is needed since the eeprom reports incorrectly that a radio is
480 present on the second unit. */
481 if (tv
.model
/ 1000 == 23) {
482 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
483 .radio
= { 0x60, I2C_CLIENT_END
},
484 .demod
= { 0x43, I2C_CLIENT_END
},
485 .tv
= { 0x61, I2C_CLIENT_END
},
488 itv
->card_name
= "WinTV PVR 500";
489 itv
->card_i2c
= &ivtv_i2c_radio
;
490 if (pci_slot
== 8 || pci_slot
== 9) {
491 int is_first
= (pci_slot
& 1) == 0;
493 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
494 "WinTV PVR 500 (unit #2)";
496 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
501 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
503 switch (tv
.tuner_hauppauge_model
) {
507 itv
->pvr150_workaround
= 1;
512 if (tv
.tuner_type
== TUNER_ABSENT
)
513 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
515 if (itv
->options
.tuner
== -1)
516 itv
->options
.tuner
= tv
.tuner_type
;
517 if (itv
->options
.radio
== -1)
518 itv
->options
.radio
= (tv
.has_radio
!= 0);
519 /* only enable newi2c if an IR blaster is present */
520 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
521 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
522 if (itv
->options
.newi2c
) {
523 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
530 /* user specified tuner standard */
533 /* autodetect tuner standard */
534 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
535 IVTV_DEBUG_INFO("PAL tuner detected\n");
536 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
537 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
538 IVTV_DEBUG_INFO("NTSC tuner detected\n");
539 itv
->std
|= V4L2_STD_NTSC_M
;
540 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
541 IVTV_DEBUG_INFO("SECAM tuner detected\n");
542 itv
->std
|= V4L2_STD_SECAM_L
;
544 IVTV_INFO("No tuner detected, default to NTSC-M\n");
545 itv
->std
|= V4L2_STD_NTSC_M
;
549 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
554 return V4L2_STD_PAL_60
;
562 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
566 if (pal
[1] == 'c' || pal
[1] == 'C')
567 return V4L2_STD_PAL_Nc
;
568 return V4L2_STD_PAL_N
;
572 return V4L2_STD_PAL_I
;
578 return V4L2_STD_PAL_DK
;
582 return V4L2_STD_PAL_M
;
586 IVTV_WARN("pal= argument not recognised\n");
598 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
604 return V4L2_STD_SECAM_DK
;
608 if (secam
[1] == 'C' || secam
[1] == 'c')
609 return V4L2_STD_SECAM_LC
;
610 return V4L2_STD_SECAM_L
;
614 IVTV_WARN("secam= argument not recognised\n");
622 return V4L2_STD_NTSC_M
;
626 return V4L2_STD_NTSC_M_JP
;
630 return V4L2_STD_NTSC_M_KR
;
634 IVTV_WARN("ntsc= argument not recognised\n");
642 static void ivtv_process_options(struct ivtv
*itv
)
644 const char *chipname
;
647 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
648 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
649 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
650 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
651 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
652 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
653 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
654 itv
->options
.cardtype
= cardtype
[itv
->instance
];
655 itv
->options
.tuner
= tuner
[itv
->instance
];
656 itv
->options
.radio
= radio
[itv
->instance
];
658 itv
->options
.i2c_clock_period
= i2c_clock_period
[itv
->instance
];
659 if (itv
->options
.i2c_clock_period
== -1)
660 itv
->options
.i2c_clock_period
= IVTV_DEFAULT_I2C_CLOCK_PERIOD
;
661 else if (itv
->options
.i2c_clock_period
< 10)
662 itv
->options
.i2c_clock_period
= 10;
663 else if (itv
->options
.i2c_clock_period
> 4500)
664 itv
->options
.i2c_clock_period
= 4500;
666 itv
->options
.newi2c
= newi2c
;
667 if (tunertype
< -1 || tunertype
> 1) {
668 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
671 itv
->std
= ivtv_parse_std(itv
);
672 if (itv
->std
== 0 && tunertype
>= 0)
673 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
674 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
675 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
676 if (itv
->options
.cardtype
== -1) {
677 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
680 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
681 IVTV_INFO("User specified %s card (detected %s based chip)\n",
682 itv
->card
->name
, chipname
);
683 } else if (itv
->options
.cardtype
!= 0) {
684 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
686 if (itv
->card
== NULL
) {
687 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
688 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
689 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
690 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
691 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
695 if (itv
->card
== NULL
) {
696 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
697 if (itv
->card
->pci_list
== NULL
)
699 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
700 if (itv
->pdev
->device
!=
701 itv
->card
->pci_list
[j
].device
)
703 if (itv
->pdev
->subsystem_vendor
!=
704 itv
->card
->pci_list
[j
].subsystem_vendor
)
706 if (itv
->pdev
->subsystem_device
!=
707 itv
->card
->pci_list
[j
].subsystem_device
)
709 IVTV_INFO("Autodetected %s card (%s based)\n",
710 itv
->card
->name
, chipname
);
717 if (itv
->card
== NULL
) {
718 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
719 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
720 itv
->pdev
->vendor
, itv
->pdev
->device
);
721 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
722 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
723 IVTV_ERR(" %s based\n", chipname
);
724 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
725 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
726 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
727 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
729 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
730 itv
->card_name
= itv
->card
->name
;
731 itv
->card_i2c
= itv
->card
->i2c
;
734 /* Precondition: the ivtv structure has been memset to 0. Only
735 the dev and num fields have been filled in.
736 No assumptions on the card type may be made here (see ivtv_init_struct2
739 static int ivtv_init_struct1(struct ivtv
*itv
)
741 struct sched_param param
= { .sched_priority
= 99 };
743 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
744 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
745 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
747 mutex_init(&itv
->serialize_lock
);
748 mutex_init(&itv
->i2c_bus_lock
);
749 mutex_init(&itv
->udma
.lock
);
751 spin_lock_init(&itv
->lock
);
752 spin_lock_init(&itv
->dma_reg_lock
);
754 kthread_init_worker(&itv
->irq_worker
);
755 itv
->irq_worker_task
= kthread_run(kthread_worker_fn
, &itv
->irq_worker
,
756 "%s", itv
->v4l2_dev
.name
);
757 if (IS_ERR(itv
->irq_worker_task
)) {
758 IVTV_ERR("Could not create ivtv task\n");
761 /* must use the FIFO scheduler as it is realtime sensitive */
762 sched_setscheduler(itv
->irq_worker_task
, SCHED_FIFO
, ¶m
);
764 kthread_init_work(&itv
->irq_work
, ivtv_irq_work_handler
);
766 /* Initial settings */
767 itv
->cxhdl
.port
= CX2341X_PORT_MEMORY
;
768 itv
->cxhdl
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
769 init_waitqueue_head(&itv
->eos_waitq
);
770 init_waitqueue_head(&itv
->event_waitq
);
771 init_waitqueue_head(&itv
->vsync_waitq
);
772 init_waitqueue_head(&itv
->dma_waitq
);
773 timer_setup(&itv
->dma_timer
, ivtv_unfinished_dma
, 0);
775 itv
->cur_dma_stream
= -1;
776 itv
->cur_pio_stream
= -1;
782 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
783 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
785 /* Init the sg table for osd/yuv output */
786 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
789 itv
->osd_global_alpha_state
= 1;
790 itv
->osd_global_alpha
= 255;
793 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
794 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
795 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
796 itv
->yuv_info
.max_frames_buffered
= 3;
797 itv
->yuv_info
.track_osd
= 1;
801 /* Second initialization part. Here the card type has been
803 static void ivtv_init_struct2(struct ivtv
*itv
)
807 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
808 if (itv
->card
->video_inputs
[i
].video_type
== 0)
811 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
812 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
814 itv
->nof_audio_inputs
= i
;
816 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
817 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
819 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
822 /* Find tuner input */
823 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
824 if (itv
->card
->video_inputs
[i
].video_type
==
825 IVTV_CARD_INPUT_VID_TUNER
)
828 if (i
>= itv
->nof_inputs
)
830 itv
->active_input
= i
;
831 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
834 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
835 const struct pci_device_id
*pci_id
)
838 unsigned char pci_latency
;
840 IVTV_DEBUG_INFO("Enabling pci device\n");
842 if (pci_enable_device(pdev
)) {
843 IVTV_ERR("Can't enable device!\n");
846 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))) {
847 IVTV_ERR("No suitable DMA available.\n");
850 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
851 IVTV_ERR("Cannot request encoder memory region.\n");
855 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
856 IVTV_REG_SIZE
, "ivtv registers")) {
857 IVTV_ERR("Cannot request register memory region.\n");
858 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
862 if (itv
->has_cx23415
&&
863 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
864 IVTV_DECODER_SIZE
, "ivtv decoder")) {
865 IVTV_ERR("Cannot request decoder memory region.\n");
866 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
867 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
871 /* Check for bus mastering */
872 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
873 if (!(cmd
& PCI_COMMAND_MASTER
)) {
874 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
875 pci_set_master(pdev
);
876 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
877 if (!(cmd
& PCI_COMMAND_MASTER
)) {
878 IVTV_ERR("Bus Mastering is not enabled\n");
882 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
884 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
886 if (pci_latency
< 64 && ivtv_pci_latency
) {
887 IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
889 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
890 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
892 /* This config space value relates to DMA latencies. The
893 default value 0x8080 is too low however and will lead
894 to DMA errors. 0xffff is the max value which solves
896 pci_write_config_dword(pdev
, 0x40, 0xffff);
898 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
899 pdev
->device
, pdev
->revision
, pdev
->bus
->number
,
900 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
901 pdev
->irq
, pci_latency
, (u64
)itv
->base_addr
);
906 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
908 u32 hw
= itv
->card
->hw_all
;
911 /* check which i2c devices are actually found */
912 for (i
= 0; i
< 32; i
++) {
917 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
918 /* GPIO and TVEEPROM do not use i2c probing */
919 itv
->hw_flags
|= device
;
922 if (ivtv_i2c_register(itv
, i
) == 0)
923 itv
->hw_flags
|= device
;
926 /* probe for legacy IR controllers that aren't in card definitions */
927 if ((itv
->hw_flags
& IVTV_HW_IR_ANY
) == 0)
928 ivtv_i2c_new_ir_legacy(itv
);
930 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
931 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
932 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
933 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
934 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
935 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
937 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
938 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
939 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
943 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
944 /* Several variations of this card exist, detect which card
945 type should be used. */
946 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
947 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
948 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
949 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
951 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
952 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
953 /* The crystal frequency of GVMVPRX is 24.576MHz */
954 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
955 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
958 if (hw
& IVTV_HW_CX25840
) {
959 itv
->vbi
.raw_decoder_line_size
= 1444;
960 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
961 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
962 itv
->vbi
.sliced_decoder_line_size
= 272;
963 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
964 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
967 if (hw
& IVTV_HW_SAA711X
) {
968 /* determine the exact saa711x model */
969 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
971 if (strstr(itv
->sd_video
->name
, "saa7114")) {
972 itv
->hw_flags
|= IVTV_HW_SAA7114
;
973 /* VBI is not yet supported by the saa7114 driver. */
974 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
976 itv
->hw_flags
|= IVTV_HW_SAA7115
;
978 itv
->vbi
.raw_decoder_line_size
= 1443;
979 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
980 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
981 itv
->vbi
.sliced_decoder_line_size
= 51;
982 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
983 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
986 if (hw
& IVTV_HW_SAA717X
) {
987 itv
->vbi
.raw_decoder_line_size
= 1443;
988 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
989 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
990 itv
->vbi
.sliced_decoder_line_size
= 51;
991 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
992 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
996 static int ivtv_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pci_id
)
1002 itv
= kzalloc(sizeof(struct ivtv
), GFP_ATOMIC
);
1006 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
1009 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
1014 IVTV_INFO("Initializing card %d\n", itv
->instance
);
1016 ivtv_process_options(itv
);
1017 if (itv
->options
.cardtype
== -1) {
1021 if (ivtv_init_struct1(itv
)) {
1025 retval
= cx2341x_handler_init(&itv
->cxhdl
, 50);
1028 itv
->v4l2_dev
.ctrl_handler
= &itv
->cxhdl
.hdl
;
1029 itv
->cxhdl
.ops
= &ivtv_cxhdl_ops
;
1030 itv
->cxhdl
.priv
= itv
;
1031 itv
->cxhdl
.func
= ivtv_api_func
;
1033 IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64
)itv
->base_addr
);
1035 /* PCI Device Setup */
1036 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
1039 if (retval
== -ENXIO
)
1043 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1044 (u64
)itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
1045 itv
->enc_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
1047 if (!itv
->enc_mem
) {
1048 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
1049 IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
1050 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1051 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1056 if (itv
->has_cx23415
) {
1057 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1058 (u64
)itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1059 itv
->dec_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
1061 if (!itv
->dec_mem
) {
1062 IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
1063 IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
1064 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1065 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1071 itv
->dec_mem
= itv
->enc_mem
;
1074 /* map registers memory */
1075 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1076 (u64
)itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1078 ioremap_nocache(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1079 if (!itv
->reg_mem
) {
1080 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
1081 IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
1082 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1083 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1088 retval
= ivtv_gpio_init(itv
);
1093 IVTV_DEBUG_INFO("activating i2c...\n");
1094 if (init_ivtv_i2c(itv
)) {
1095 IVTV_ERR("Could not initialize i2c\n");
1099 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1100 /* Based on the model number the cardtype may be changed.
1101 The PCI IDs are not always reliable. */
1102 ivtv_process_eeprom(itv
);
1104 if (itv
->card
->comment
)
1105 IVTV_INFO("%s", itv
->card
->comment
);
1106 if (itv
->card
->v4l2_capabilities
== 0) {
1107 /* card was detected but is not supported */
1112 if (itv
->std
== 0) {
1113 itv
->std
= V4L2_STD_NTSC_M
;
1116 if (itv
->options
.tuner
== -1) {
1119 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1120 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1122 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1126 /* if no tuner was found, then pick the first tuner in the card list */
1127 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1128 itv
->std
= itv
->card
->tuners
[0].std
;
1129 if (itv
->std
& V4L2_STD_PAL
)
1130 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1131 else if (itv
->std
& V4L2_STD_NTSC
)
1132 itv
->std
= V4L2_STD_NTSC_M
;
1133 else if (itv
->std
& V4L2_STD_SECAM
)
1134 itv
->std
= V4L2_STD_SECAM_L
;
1135 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1137 if (itv
->options
.radio
== -1)
1138 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1140 /* The card is now fully identified, continue with card-specific
1142 ivtv_init_struct2(itv
);
1144 ivtv_load_and_init_modules(itv
);
1146 if (itv
->std
& V4L2_STD_525_60
) {
1148 itv
->is_out_60hz
= 1;
1151 itv
->is_out_50hz
= 1;
1154 itv
->yuv_info
.osd_full_w
= 720;
1155 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1156 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1157 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1159 cx2341x_handler_set_50hz(&itv
->cxhdl
, itv
->is_50hz
);
1161 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1162 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1163 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1164 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1165 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1167 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1168 It is possible to switch between PAL and NTSC, so we need to
1169 take the largest size here. */
1170 /* 1456 is multiple of 16, real size = 1444 */
1171 itv
->vbi
.raw_size
= 1456;
1172 /* We use a buffer size of 1/2 of the total size needed for a
1173 frame. This is actually very useful, since we now receive
1174 a field at a time and that makes 'compressing' the raw data
1175 down to size by stripping off the SAV codes a lot easier.
1176 Note: having two different buffer sizes prevents standard
1177 switching on the fly. We need to find a better solution... */
1178 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1179 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1180 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1182 if (itv
->options
.radio
> 0)
1183 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1185 if (itv
->options
.tuner
> -1) {
1186 struct tuner_setup setup
;
1188 setup
.addr
= ADDR_UNSET
;
1189 setup
.type
= itv
->options
.tuner
;
1190 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1191 if (itv
->options
.radio
> 0)
1192 setup
.mode_mask
|= T_RADIO
;
1193 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1194 ivtv_reset_tuner_gpio
: NULL
;
1195 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1196 if (setup
.type
== TUNER_XC2028
) {
1197 static struct xc2028_ctrl ctrl
= {
1198 .fname
= XC2028_DEFAULT_FIRMWARE
,
1201 struct v4l2_priv_tun_config cfg
= {
1202 .tuner
= itv
->options
.tuner
,
1205 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1209 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1211 itv
->tuner_std
= itv
->std
;
1213 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1214 struct v4l2_ctrl_handler
*hdl
= itv
->v4l2_dev
.ctrl_handler
;
1216 itv
->ctrl_pts
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1217 V4L2_CID_MPEG_VIDEO_DEC_PTS
, 0, 0, 0, 0);
1218 itv
->ctrl_frame
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1219 V4L2_CID_MPEG_VIDEO_DEC_FRAME
, 0, 0, 0, 0);
1220 /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported,
1221 mask that menu item. */
1222 itv
->ctrl_audio_playback
=
1223 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1224 V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK
,
1225 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1226 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1227 V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO
);
1228 itv
->ctrl_audio_multilingual_playback
=
1229 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1230 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK
,
1231 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1232 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1233 V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT
);
1235 retval
= hdl
->error
;
1238 v4l2_ctrl_cluster(2, &itv
->ctrl_pts
);
1239 v4l2_ctrl_cluster(2, &itv
->ctrl_audio_playback
);
1240 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1241 /* Turn off the output signal. The mpeg decoder is not yet
1242 active so without this you would get a green image until the
1243 mpeg decoder becomes active. */
1244 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1247 /* clear interrupt mask, effectively disabling interrupts */
1248 ivtv_set_irq_mask(itv
, 0xffffffff);
1251 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1252 IRQF_SHARED
, itv
->v4l2_dev
.name
, (void *)itv
);
1254 IVTV_ERR("Failed to register irq %d\n", retval
);
1258 retval
= ivtv_streams_setup(itv
);
1260 IVTV_ERR("Error %d setting up streams\n", retval
);
1263 retval
= ivtv_streams_register(itv
);
1265 IVTV_ERR("Error %d registering devices\n", retval
);
1268 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1270 /* Load ivtv submodules (ivtv-alsa) */
1271 request_modules(itv
);
1275 ivtv_streams_cleanup(itv
);
1277 free_irq(itv
->pdev
->irq
, (void *)itv
);
1279 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1284 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1285 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1286 if (itv
->has_cx23415
)
1287 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1289 kthread_stop(itv
->irq_worker_task
);
1293 IVTV_ERR("Error %d on initialization\n", retval
);
1295 v4l2_device_unregister(&itv
->v4l2_dev
);
1300 int ivtv_init_on_first_open(struct ivtv
*itv
)
1302 struct v4l2_frequency vf
;
1303 /* Needed to call ioctls later */
1304 struct ivtv_open_id fh
;
1305 int fw_retry_count
= 3;
1309 fh
.type
= IVTV_ENC_STREAM_TYPE_MPG
;
1311 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1314 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1317 while (--fw_retry_count
> 0) {
1319 if (ivtv_firmware_init(itv
) == 0)
1321 if (fw_retry_count
> 1)
1322 IVTV_WARN("Retry loading firmware\n");
1325 if (fw_retry_count
== 0) {
1326 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1330 /* Try and get firmware versions */
1331 IVTV_DEBUG_INFO("Getting firmware version..\n");
1332 ivtv_firmware_versions(itv
);
1334 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
1335 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1338 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1339 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1341 /* Set initial frequency. For PAL/SECAM broadcasts no
1342 'default' channel exists AFAIK. */
1343 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1344 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1346 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1347 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1350 video_input
= itv
->active_input
;
1351 itv
->active_input
++; /* Force update of input */
1352 ivtv_s_input(NULL
, &fh
, video_input
);
1354 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1356 itv
->std
++; /* Force full standard initialization */
1357 itv
->std_out
= itv
->std
;
1358 ivtv_s_frequency(NULL
, &fh
, &vf
);
1360 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1361 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1362 the mpeg decoder so now the saa7127 receives a proper
1364 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1365 ivtv_init_mpeg_decoder(itv
);
1368 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1369 if (!itv
->has_cx23415
)
1370 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1372 ivtv_s_std_enc(itv
, itv
->tuner_std
);
1374 /* Default interrupts enabled. For the PVR350 this includes the
1375 decoder VSYNC interrupt, which is always on. It is not only used
1376 during decoding but also by the OSD.
1377 Some old PVR250 cards had a cx23415, so testing for that is too
1378 general. Instead test if the card has video output capability. */
1379 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1380 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1381 ivtv_set_osd_alpha(itv
);
1382 ivtv_s_std_dec(itv
, itv
->tuner_std
);
1384 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1387 /* Setup initial controls */
1388 cx2341x_handler_setup(&itv
->cxhdl
);
1392 static void ivtv_remove(struct pci_dev
*pdev
)
1394 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1395 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1398 IVTV_DEBUG_INFO("Removing card\n");
1400 flush_request_modules(itv
);
1402 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1403 /* Stop all captures */
1404 IVTV_DEBUG_INFO("Stopping all streams\n");
1405 if (atomic_read(&itv
->capturing
) > 0)
1406 ivtv_stop_all_captures(itv
);
1408 /* Stop all decoding */
1409 IVTV_DEBUG_INFO("Stopping decoding\n");
1411 /* Turn off the TV-out */
1412 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1413 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1414 if (atomic_read(&itv
->decoding
) > 0) {
1417 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1418 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1420 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1421 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1422 V4L2_DEC_CMD_STOP_TO_BLACK
| V4L2_DEC_CMD_STOP_IMMEDIATELY
, 0);
1424 ivtv_halt_firmware(itv
);
1428 ivtv_set_irq_mask(itv
, 0xffffffff);
1429 del_timer_sync(&itv
->dma_timer
);
1431 /* Kill irq worker */
1432 kthread_flush_worker(&itv
->irq_worker
);
1433 kthread_stop(itv
->irq_worker_task
);
1435 ivtv_streams_cleanup(itv
);
1436 ivtv_udma_free(itv
);
1438 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1442 free_irq(itv
->pdev
->irq
, (void *)itv
);
1445 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1446 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1447 if (itv
->has_cx23415
)
1448 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1450 pci_disable_device(itv
->pdev
);
1451 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1452 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1454 pr_info("Removed %s\n", itv
->card_name
);
1456 v4l2_device_unregister(&itv
->v4l2_dev
);
1460 /* define a pci_driver for card detection */
1461 static struct pci_driver ivtv_pci_driver
= {
1463 .id_table
= ivtv_pci_tbl
,
1464 .probe
= ivtv_probe
,
1465 .remove
= ivtv_remove
,
1468 static int __init
module_start(void)
1470 pr_info("Start initialization, version %s\n", IVTV_VERSION
);
1472 /* Validate parameters */
1473 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1474 pr_err("Exiting, ivtv_first_minor must be between 0 and %d\n",
1475 IVTV_MAX_CARDS
- 1);
1479 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1481 pr_info("Debug value must be >= 0 and <= 2047\n");
1484 if (pci_register_driver(&ivtv_pci_driver
)) {
1485 pr_err("Error detecting PCI card\n");
1488 pr_info("End initialization\n");
1492 static void __exit
module_cleanup(void)
1494 pci_unregister_driver(&ivtv_pci_driver
);
1497 /* Note: These symbols are exported because they are used by the ivtvfb
1498 framebuffer module and an infrared module for the IR-blaster. */
1499 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1500 EXPORT_SYMBOL(ivtv_api
);
1501 EXPORT_SYMBOL(ivtv_vapi
);
1502 EXPORT_SYMBOL(ivtv_vapi_result
);
1503 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1504 EXPORT_SYMBOL(ivtv_debug
);
1505 #ifdef CONFIG_VIDEO_ADV_DEBUG
1506 EXPORT_SYMBOL(ivtv_fw_debug
);
1508 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1509 EXPORT_SYMBOL(ivtv_udma_setup
);
1510 EXPORT_SYMBOL(ivtv_udma_unmap
);
1511 EXPORT_SYMBOL(ivtv_udma_alloc
);
1512 EXPORT_SYMBOL(ivtv_udma_prepare
);
1513 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1514 EXPORT_SYMBOL(ivtv_firmware_check
);
1516 module_init(module_start
);
1517 module_exit(module_cleanup
);