2 * Driver for NAND MLC Controller in LPC32xx
4 * Author: Roland Stigge <stigge@antcom.de>
6 * Copyright © 2011 WORK Microwave GmbH
7 * Copyright © 2011, 2012 Roland Stigge
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * NAND Flash Controller Operation:
22 * - Write: Auto Encode
23 * - Tested Page Sizes: 2048, 4096
26 #include <linux/slab.h>
27 #include <linux/module.h>
28 #include <linux/platform_device.h>
29 #include <linux/mtd/mtd.h>
30 #include <linux/mtd/rawnand.h>
31 #include <linux/mtd/partitions.h>
32 #include <linux/clk.h>
33 #include <linux/err.h>
34 #include <linux/delay.h>
35 #include <linux/completion.h>
36 #include <linux/interrupt.h>
38 #include <linux/of_gpio.h>
39 #include <linux/mtd/lpc32xx_mlc.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/dmaengine.h>
44 #include <linux/mtd/nand_ecc.h>
46 #define DRV_NAME "lpc32xx_mlc"
48 /**********************************************************************
49 * MLC NAND controller register offsets
50 **********************************************************************/
52 #define MLC_BUFF(x) (x + 0x00000)
53 #define MLC_DATA(x) (x + 0x08000)
54 #define MLC_CMD(x) (x + 0x10000)
55 #define MLC_ADDR(x) (x + 0x10004)
56 #define MLC_ECC_ENC_REG(x) (x + 0x10008)
57 #define MLC_ECC_DEC_REG(x) (x + 0x1000C)
58 #define MLC_ECC_AUTO_ENC_REG(x) (x + 0x10010)
59 #define MLC_ECC_AUTO_DEC_REG(x) (x + 0x10014)
60 #define MLC_RPR(x) (x + 0x10018)
61 #define MLC_WPR(x) (x + 0x1001C)
62 #define MLC_RUBP(x) (x + 0x10020)
63 #define MLC_ROBP(x) (x + 0x10024)
64 #define MLC_SW_WP_ADD_LOW(x) (x + 0x10028)
65 #define MLC_SW_WP_ADD_HIG(x) (x + 0x1002C)
66 #define MLC_ICR(x) (x + 0x10030)
67 #define MLC_TIME_REG(x) (x + 0x10034)
68 #define MLC_IRQ_MR(x) (x + 0x10038)
69 #define MLC_IRQ_SR(x) (x + 0x1003C)
70 #define MLC_LOCK_PR(x) (x + 0x10044)
71 #define MLC_ISR(x) (x + 0x10048)
72 #define MLC_CEH(x) (x + 0x1004C)
74 /**********************************************************************
75 * MLC_CMD bit definitions
76 **********************************************************************/
77 #define MLCCMD_RESET 0xFF
79 /**********************************************************************
80 * MLC_ICR bit definitions
81 **********************************************************************/
82 #define MLCICR_WPROT (1 << 3)
83 #define MLCICR_LARGEBLOCK (1 << 2)
84 #define MLCICR_LONGADDR (1 << 1)
85 #define MLCICR_16BIT (1 << 0) /* unsupported by LPC32x0! */
87 /**********************************************************************
88 * MLC_TIME_REG bit definitions
89 **********************************************************************/
90 #define MLCTIMEREG_TCEA_DELAY(n) (((n) & 0x03) << 24)
91 #define MLCTIMEREG_BUSY_DELAY(n) (((n) & 0x1F) << 19)
92 #define MLCTIMEREG_NAND_TA(n) (((n) & 0x07) << 16)
93 #define MLCTIMEREG_RD_HIGH(n) (((n) & 0x0F) << 12)
94 #define MLCTIMEREG_RD_LOW(n) (((n) & 0x0F) << 8)
95 #define MLCTIMEREG_WR_HIGH(n) (((n) & 0x0F) << 4)
96 #define MLCTIMEREG_WR_LOW(n) (((n) & 0x0F) << 0)
98 /**********************************************************************
99 * MLC_IRQ_MR and MLC_IRQ_SR bit definitions
100 **********************************************************************/
101 #define MLCIRQ_NAND_READY (1 << 5)
102 #define MLCIRQ_CONTROLLER_READY (1 << 4)
103 #define MLCIRQ_DECODE_FAILURE (1 << 3)
104 #define MLCIRQ_DECODE_ERROR (1 << 2)
105 #define MLCIRQ_ECC_READY (1 << 1)
106 #define MLCIRQ_WRPROT_FAULT (1 << 0)
108 /**********************************************************************
109 * MLC_LOCK_PR bit definitions
110 **********************************************************************/
111 #define MLCLOCKPR_MAGIC 0xA25E
113 /**********************************************************************
114 * MLC_ISR bit definitions
115 **********************************************************************/
116 #define MLCISR_DECODER_FAILURE (1 << 6)
117 #define MLCISR_ERRORS ((1 << 4) | (1 << 5))
118 #define MLCISR_ERRORS_DETECTED (1 << 3)
119 #define MLCISR_ECC_READY (1 << 2)
120 #define MLCISR_CONTROLLER_READY (1 << 1)
121 #define MLCISR_NAND_READY (1 << 0)
123 /**********************************************************************
124 * MLC_CEH bit definitions
125 **********************************************************************/
126 #define MLCCEH_NORMAL (1 << 0)
128 struct lpc32xx_nand_cfg_mlc
{
137 struct mtd_partition
*parts
;
141 static int lpc32xx_ooblayout_ecc(struct mtd_info
*mtd
, int section
,
142 struct mtd_oob_region
*oobregion
)
144 struct nand_chip
*nand_chip
= mtd_to_nand(mtd
);
146 if (section
>= nand_chip
->ecc
.steps
)
149 oobregion
->offset
= ((section
+ 1) * 16) - nand_chip
->ecc
.bytes
;
150 oobregion
->length
= nand_chip
->ecc
.bytes
;
155 static int lpc32xx_ooblayout_free(struct mtd_info
*mtd
, int section
,
156 struct mtd_oob_region
*oobregion
)
158 struct nand_chip
*nand_chip
= mtd_to_nand(mtd
);
160 if (section
>= nand_chip
->ecc
.steps
)
163 oobregion
->offset
= 16 * section
;
164 oobregion
->length
= 16 - nand_chip
->ecc
.bytes
;
169 static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops
= {
170 .ecc
= lpc32xx_ooblayout_ecc
,
171 .free
= lpc32xx_ooblayout_free
,
174 static struct nand_bbt_descr lpc32xx_nand_bbt
= {
175 .options
= NAND_BBT_ABSPAGE
| NAND_BBT_2BIT
| NAND_BBT_NO_OOB
|
177 .pages
= { 524224, 0, 0, 0, 0, 0, 0, 0 },
180 static struct nand_bbt_descr lpc32xx_nand_bbt_mirror
= {
181 .options
= NAND_BBT_ABSPAGE
| NAND_BBT_2BIT
| NAND_BBT_NO_OOB
|
183 .pages
= { 524160, 0, 0, 0, 0, 0, 0, 0 },
186 struct lpc32xx_nand_host
{
187 struct nand_chip nand_chip
;
188 struct lpc32xx_mlc_platform_data
*pdata
;
190 void __iomem
*io_base
;
192 struct lpc32xx_nand_cfg_mlc
*ncfg
;
193 struct completion comp_nand
;
194 struct completion comp_controller
;
197 * Physical addresses of ECC buffer, DMA data buffers, OOB data buffer
199 dma_addr_t oob_buf_phy
;
201 * Virtual addresses of ECC buffer, DMA data buffers, OOB data buffer
204 /* Physical address of DMA base address */
205 dma_addr_t io_base_phy
;
207 struct completion comp_dma
;
208 struct dma_chan
*dma_chan
;
209 struct dma_slave_config dma_slave_config
;
210 struct scatterlist sgl
;
213 int mlcsubpages
; /* number of 512bytes-subpages */
217 * Activate/Deactivate DMA Operation:
219 * Using the PL080 DMA Controller for transferring the 512 byte subpages
220 * instead of doing readl() / writel() in a loop slows it down significantly.
221 * Measurements via getnstimeofday() upon 512 byte subpage reads reveal:
223 * - readl() of 128 x 32 bits in a loop: ~20us
224 * - DMA read of 512 bytes (32 bit, 4...128 words bursts): ~60us
225 * - DMA read of 512 bytes (32 bit, no bursts): ~100us
227 * This applies to the transfer itself. In the DMA case: only the
228 * wait_for_completion() (DMA setup _not_ included).
230 * Note that the 512 bytes subpage transfer is done directly from/to a
231 * FIFO/buffer inside the NAND controller. Most of the time (~400-800us for a
232 * 2048 bytes page) is spent waiting for the NAND IRQ, anyway. (The NAND
233 * controller transferring data between its internal buffer to/from the NAND
236 * Therefore, using the PL080 DMA is disabled by default, for now.
241 static void lpc32xx_nand_setup(struct lpc32xx_nand_host
*host
)
243 uint32_t clkrate
, tmp
;
245 /* Reset MLC controller */
246 writel(MLCCMD_RESET
, MLC_CMD(host
->io_base
));
249 /* Get base clock for MLC block */
250 clkrate
= clk_get_rate(host
->clk
);
255 * (among others, will be locked again automatically) */
256 writew(MLCLOCKPR_MAGIC
, MLC_LOCK_PR(host
->io_base
));
258 /* Configure MLC Controller: Large Block, 5 Byte Address */
259 tmp
= MLCICR_LARGEBLOCK
| MLCICR_LONGADDR
;
260 writel(tmp
, MLC_ICR(host
->io_base
));
262 /* Unlock MLC_TIME_REG
263 * (among others, will be locked again automatically) */
264 writew(MLCLOCKPR_MAGIC
, MLC_LOCK_PR(host
->io_base
));
266 /* Compute clock setup values, see LPC and NAND manual */
268 tmp
|= MLCTIMEREG_TCEA_DELAY(clkrate
/ host
->ncfg
->tcea_delay
+ 1);
269 tmp
|= MLCTIMEREG_BUSY_DELAY(clkrate
/ host
->ncfg
->busy_delay
+ 1);
270 tmp
|= MLCTIMEREG_NAND_TA(clkrate
/ host
->ncfg
->nand_ta
+ 1);
271 tmp
|= MLCTIMEREG_RD_HIGH(clkrate
/ host
->ncfg
->rd_high
+ 1);
272 tmp
|= MLCTIMEREG_RD_LOW(clkrate
/ host
->ncfg
->rd_low
);
273 tmp
|= MLCTIMEREG_WR_HIGH(clkrate
/ host
->ncfg
->wr_high
+ 1);
274 tmp
|= MLCTIMEREG_WR_LOW(clkrate
/ host
->ncfg
->wr_low
);
275 writel(tmp
, MLC_TIME_REG(host
->io_base
));
277 /* Enable IRQ for CONTROLLER_READY and NAND_READY */
278 writeb(MLCIRQ_CONTROLLER_READY
| MLCIRQ_NAND_READY
,
279 MLC_IRQ_MR(host
->io_base
));
281 /* Normal nCE operation: nCE controlled by controller */
282 writel(MLCCEH_NORMAL
, MLC_CEH(host
->io_base
));
286 * Hardware specific access to control lines
288 static void lpc32xx_nand_cmd_ctrl(struct mtd_info
*mtd
, int cmd
,
291 struct nand_chip
*nand_chip
= mtd_to_nand(mtd
);
292 struct lpc32xx_nand_host
*host
= nand_get_controller_data(nand_chip
);
294 if (cmd
!= NAND_CMD_NONE
) {
296 writel(cmd
, MLC_CMD(host
->io_base
));
298 writel(cmd
, MLC_ADDR(host
->io_base
));
303 * Read Device Ready (NAND device _and_ controller ready)
305 static int lpc32xx_nand_device_ready(struct mtd_info
*mtd
)
307 struct nand_chip
*nand_chip
= mtd_to_nand(mtd
);
308 struct lpc32xx_nand_host
*host
= nand_get_controller_data(nand_chip
);
310 if ((readb(MLC_ISR(host
->io_base
)) &
311 (MLCISR_CONTROLLER_READY
| MLCISR_NAND_READY
)) ==
312 (MLCISR_CONTROLLER_READY
| MLCISR_NAND_READY
))
318 static irqreturn_t
lpc3xxx_nand_irq(int irq
, struct lpc32xx_nand_host
*host
)
322 /* Clear interrupt flag by reading status */
323 sr
= readb(MLC_IRQ_SR(host
->io_base
));
324 if (sr
& MLCIRQ_NAND_READY
)
325 complete(&host
->comp_nand
);
326 if (sr
& MLCIRQ_CONTROLLER_READY
)
327 complete(&host
->comp_controller
);
332 static int lpc32xx_waitfunc_nand(struct mtd_info
*mtd
, struct nand_chip
*chip
)
334 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
336 if (readb(MLC_ISR(host
->io_base
)) & MLCISR_NAND_READY
)
339 wait_for_completion(&host
->comp_nand
);
341 while (!(readb(MLC_ISR(host
->io_base
)) & MLCISR_NAND_READY
)) {
342 /* Seems to be delayed sometimes by controller */
343 dev_dbg(&mtd
->dev
, "Warning: NAND not ready.\n");
348 return NAND_STATUS_READY
;
351 static int lpc32xx_waitfunc_controller(struct mtd_info
*mtd
,
352 struct nand_chip
*chip
)
354 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
356 if (readb(MLC_ISR(host
->io_base
)) & MLCISR_CONTROLLER_READY
)
359 wait_for_completion(&host
->comp_controller
);
361 while (!(readb(MLC_ISR(host
->io_base
)) &
362 MLCISR_CONTROLLER_READY
)) {
363 dev_dbg(&mtd
->dev
, "Warning: Controller not ready.\n");
368 return NAND_STATUS_READY
;
371 static int lpc32xx_waitfunc(struct mtd_info
*mtd
, struct nand_chip
*chip
)
373 lpc32xx_waitfunc_nand(mtd
, chip
);
374 lpc32xx_waitfunc_controller(mtd
, chip
);
376 return NAND_STATUS_READY
;
380 * Enable NAND write protect
382 static void lpc32xx_wp_enable(struct lpc32xx_nand_host
*host
)
384 if (gpio_is_valid(host
->ncfg
->wp_gpio
))
385 gpio_set_value(host
->ncfg
->wp_gpio
, 0);
389 * Disable NAND write protect
391 static void lpc32xx_wp_disable(struct lpc32xx_nand_host
*host
)
393 if (gpio_is_valid(host
->ncfg
->wp_gpio
))
394 gpio_set_value(host
->ncfg
->wp_gpio
, 1);
397 static void lpc32xx_dma_complete_func(void *completion
)
399 complete(completion
);
402 static int lpc32xx_xmit_dma(struct mtd_info
*mtd
, void *mem
, int len
,
403 enum dma_transfer_direction dir
)
405 struct nand_chip
*chip
= mtd_to_nand(mtd
);
406 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
407 struct dma_async_tx_descriptor
*desc
;
408 int flags
= DMA_CTRL_ACK
| DMA_PREP_INTERRUPT
;
411 sg_init_one(&host
->sgl
, mem
, len
);
413 res
= dma_map_sg(host
->dma_chan
->device
->dev
, &host
->sgl
, 1,
416 dev_err(mtd
->dev
.parent
, "Failed to map sg list\n");
419 desc
= dmaengine_prep_slave_sg(host
->dma_chan
, &host
->sgl
, 1, dir
,
422 dev_err(mtd
->dev
.parent
, "Failed to prepare slave sg\n");
426 init_completion(&host
->comp_dma
);
427 desc
->callback
= lpc32xx_dma_complete_func
;
428 desc
->callback_param
= &host
->comp_dma
;
430 dmaengine_submit(desc
);
431 dma_async_issue_pending(host
->dma_chan
);
433 wait_for_completion_timeout(&host
->comp_dma
, msecs_to_jiffies(1000));
435 dma_unmap_sg(host
->dma_chan
->device
->dev
, &host
->sgl
, 1,
439 dma_unmap_sg(host
->dma_chan
->device
->dev
, &host
->sgl
, 1,
444 static int lpc32xx_read_page(struct mtd_info
*mtd
, struct nand_chip
*chip
,
445 uint8_t *buf
, int oob_required
, int page
)
447 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
449 uint8_t *oobbuf
= chip
->oob_poi
;
455 if ((void *)buf
<= high_memory
) {
459 dma_buf
= host
->dma_buf
;
463 /* Writing Command and Address */
464 nand_read_page_op(chip
, page
, 0, NULL
, 0);
466 /* For all sub-pages */
467 for (i
= 0; i
< host
->mlcsubpages
; i
++) {
468 /* Start Auto Decode Command */
469 writeb(0x00, MLC_ECC_AUTO_DEC_REG(host
->io_base
));
471 /* Wait for Controller Ready */
472 lpc32xx_waitfunc_controller(mtd
, chip
);
474 /* Check ECC Error status */
475 mlc_isr
= readl(MLC_ISR(host
->io_base
));
476 if (mlc_isr
& MLCISR_DECODER_FAILURE
) {
477 mtd
->ecc_stats
.failed
++;
478 dev_warn(&mtd
->dev
, "%s: DECODER_FAILURE\n", __func__
);
479 } else if (mlc_isr
& MLCISR_ERRORS_DETECTED
) {
480 mtd
->ecc_stats
.corrected
+= ((mlc_isr
>> 4) & 0x3) + 1;
483 /* Read 512 + 16 Bytes */
485 res
= lpc32xx_xmit_dma(mtd
, dma_buf
+ i
* 512, 512,
490 for (j
= 0; j
< (512 >> 2); j
++) {
491 *((uint32_t *)(buf
)) =
492 readl(MLC_BUFF(host
->io_base
));
496 for (j
= 0; j
< (16 >> 2); j
++) {
497 *((uint32_t *)(oobbuf
)) =
498 readl(MLC_BUFF(host
->io_base
));
503 if (use_dma
&& !dma_mapped
)
504 memcpy(buf
, dma_buf
, mtd
->writesize
);
509 static int lpc32xx_write_page_lowlevel(struct mtd_info
*mtd
,
510 struct nand_chip
*chip
,
511 const uint8_t *buf
, int oob_required
,
514 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
515 const uint8_t *oobbuf
= chip
->oob_poi
;
516 uint8_t *dma_buf
= (uint8_t *)buf
;
520 if (use_dma
&& (void *)buf
>= high_memory
) {
521 dma_buf
= host
->dma_buf
;
522 memcpy(dma_buf
, buf
, mtd
->writesize
);
525 nand_prog_page_begin_op(chip
, page
, 0, NULL
, 0);
527 for (i
= 0; i
< host
->mlcsubpages
; i
++) {
529 writeb(0x00, MLC_ECC_ENC_REG(host
->io_base
));
531 /* Write 512 + 6 Bytes to Buffer */
533 res
= lpc32xx_xmit_dma(mtd
, dma_buf
+ i
* 512, 512,
538 for (j
= 0; j
< (512 >> 2); j
++) {
539 writel(*((uint32_t *)(buf
)),
540 MLC_BUFF(host
->io_base
));
544 writel(*((uint32_t *)(oobbuf
)), MLC_BUFF(host
->io_base
));
546 writew(*((uint16_t *)(oobbuf
)), MLC_BUFF(host
->io_base
));
549 /* Auto Encode w/ Bit 8 = 0 (see LPC MLC Controller manual) */
550 writeb(0x00, MLC_ECC_AUTO_ENC_REG(host
->io_base
));
552 /* Wait for Controller Ready */
553 lpc32xx_waitfunc_controller(mtd
, chip
);
556 return nand_prog_page_end_op(chip
);
559 static int lpc32xx_read_oob(struct mtd_info
*mtd
, struct nand_chip
*chip
,
562 struct lpc32xx_nand_host
*host
= nand_get_controller_data(chip
);
564 /* Read whole page - necessary with MLC controller! */
565 lpc32xx_read_page(mtd
, chip
, host
->dummy_buf
, 1, page
);
570 static int lpc32xx_write_oob(struct mtd_info
*mtd
, struct nand_chip
*chip
,
573 /* None, write_oob conflicts with the automatic LPC MLC ECC decoder! */
577 /* Prepares MLC for transfers with H/W ECC enabled: always enabled anyway */
578 static void lpc32xx_ecc_enable(struct mtd_info
*mtd
, int mode
)
580 /* Always enabled! */
583 static int lpc32xx_dma_setup(struct lpc32xx_nand_host
*host
)
585 struct mtd_info
*mtd
= nand_to_mtd(&host
->nand_chip
);
588 if (!host
->pdata
|| !host
->pdata
->dma_filter
) {
589 dev_err(mtd
->dev
.parent
, "no DMA platform data\n");
594 dma_cap_set(DMA_SLAVE
, mask
);
595 host
->dma_chan
= dma_request_channel(mask
, host
->pdata
->dma_filter
,
597 if (!host
->dma_chan
) {
598 dev_err(mtd
->dev
.parent
, "Failed to request DMA channel\n");
603 * Set direction to a sensible value even if the dmaengine driver
604 * should ignore it. With the default (DMA_MEM_TO_MEM), the amba-pl08x
605 * driver criticizes it as "alien transfer direction".
607 host
->dma_slave_config
.direction
= DMA_DEV_TO_MEM
;
608 host
->dma_slave_config
.src_addr_width
= DMA_SLAVE_BUSWIDTH_4_BYTES
;
609 host
->dma_slave_config
.dst_addr_width
= DMA_SLAVE_BUSWIDTH_4_BYTES
;
610 host
->dma_slave_config
.src_maxburst
= 128;
611 host
->dma_slave_config
.dst_maxburst
= 128;
612 /* DMA controller does flow control: */
613 host
->dma_slave_config
.device_fc
= false;
614 host
->dma_slave_config
.src_addr
= MLC_BUFF(host
->io_base_phy
);
615 host
->dma_slave_config
.dst_addr
= MLC_BUFF(host
->io_base_phy
);
616 if (dmaengine_slave_config(host
->dma_chan
, &host
->dma_slave_config
)) {
617 dev_err(mtd
->dev
.parent
, "Failed to setup DMA slave\n");
623 dma_release_channel(host
->dma_chan
);
627 static struct lpc32xx_nand_cfg_mlc
*lpc32xx_parse_dt(struct device
*dev
)
629 struct lpc32xx_nand_cfg_mlc
*ncfg
;
630 struct device_node
*np
= dev
->of_node
;
632 ncfg
= devm_kzalloc(dev
, sizeof(*ncfg
), GFP_KERNEL
);
636 of_property_read_u32(np
, "nxp,tcea-delay", &ncfg
->tcea_delay
);
637 of_property_read_u32(np
, "nxp,busy-delay", &ncfg
->busy_delay
);
638 of_property_read_u32(np
, "nxp,nand-ta", &ncfg
->nand_ta
);
639 of_property_read_u32(np
, "nxp,rd-high", &ncfg
->rd_high
);
640 of_property_read_u32(np
, "nxp,rd-low", &ncfg
->rd_low
);
641 of_property_read_u32(np
, "nxp,wr-high", &ncfg
->wr_high
);
642 of_property_read_u32(np
, "nxp,wr-low", &ncfg
->wr_low
);
644 if (!ncfg
->tcea_delay
|| !ncfg
->busy_delay
|| !ncfg
->nand_ta
||
645 !ncfg
->rd_high
|| !ncfg
->rd_low
|| !ncfg
->wr_high
||
647 dev_err(dev
, "chip parameters not specified correctly\n");
651 ncfg
->wp_gpio
= of_get_named_gpio(np
, "gpios", 0);
657 * Probe for NAND controller
659 static int lpc32xx_nand_probe(struct platform_device
*pdev
)
661 struct lpc32xx_nand_host
*host
;
662 struct mtd_info
*mtd
;
663 struct nand_chip
*nand_chip
;
667 /* Allocate memory for the device structure (and zero it) */
668 host
= devm_kzalloc(&pdev
->dev
, sizeof(*host
), GFP_KERNEL
);
672 rc
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
673 host
->io_base
= devm_ioremap_resource(&pdev
->dev
, rc
);
674 if (IS_ERR(host
->io_base
))
675 return PTR_ERR(host
->io_base
);
677 host
->io_base_phy
= rc
->start
;
679 nand_chip
= &host
->nand_chip
;
680 mtd
= nand_to_mtd(nand_chip
);
681 if (pdev
->dev
.of_node
)
682 host
->ncfg
= lpc32xx_parse_dt(&pdev
->dev
);
685 "Missing or bad NAND config from device tree\n");
688 if (host
->ncfg
->wp_gpio
== -EPROBE_DEFER
)
689 return -EPROBE_DEFER
;
690 if (gpio_is_valid(host
->ncfg
->wp_gpio
) &&
691 gpio_request(host
->ncfg
->wp_gpio
, "NAND WP")) {
692 dev_err(&pdev
->dev
, "GPIO not available\n");
695 lpc32xx_wp_disable(host
);
697 host
->pdata
= dev_get_platdata(&pdev
->dev
);
699 /* link the private data structures */
700 nand_set_controller_data(nand_chip
, host
);
701 nand_set_flash_node(nand_chip
, pdev
->dev
.of_node
);
702 mtd
->dev
.parent
= &pdev
->dev
;
705 host
->clk
= clk_get(&pdev
->dev
, NULL
);
706 if (IS_ERR(host
->clk
)) {
707 dev_err(&pdev
->dev
, "Clock initialization failure\n");
711 res
= clk_prepare_enable(host
->clk
);
715 nand_chip
->cmd_ctrl
= lpc32xx_nand_cmd_ctrl
;
716 nand_chip
->dev_ready
= lpc32xx_nand_device_ready
;
717 nand_chip
->chip_delay
= 25; /* us */
718 nand_chip
->IO_ADDR_R
= MLC_DATA(host
->io_base
);
719 nand_chip
->IO_ADDR_W
= MLC_DATA(host
->io_base
);
721 /* Init NAND controller */
722 lpc32xx_nand_setup(host
);
724 platform_set_drvdata(pdev
, host
);
726 /* Initialize function pointers */
727 nand_chip
->ecc
.hwctl
= lpc32xx_ecc_enable
;
728 nand_chip
->ecc
.read_page_raw
= lpc32xx_read_page
;
729 nand_chip
->ecc
.read_page
= lpc32xx_read_page
;
730 nand_chip
->ecc
.write_page_raw
= lpc32xx_write_page_lowlevel
;
731 nand_chip
->ecc
.write_page
= lpc32xx_write_page_lowlevel
;
732 nand_chip
->ecc
.write_oob
= lpc32xx_write_oob
;
733 nand_chip
->ecc
.read_oob
= lpc32xx_read_oob
;
734 nand_chip
->ecc
.strength
= 4;
735 nand_chip
->ecc
.bytes
= 10;
736 nand_chip
->waitfunc
= lpc32xx_waitfunc
;
738 nand_chip
->options
= NAND_NO_SUBPAGE_WRITE
;
739 nand_chip
->bbt_options
= NAND_BBT_USE_FLASH
| NAND_BBT_NO_OOB
;
740 nand_chip
->bbt_td
= &lpc32xx_nand_bbt
;
741 nand_chip
->bbt_md
= &lpc32xx_nand_bbt_mirror
;
744 res
= lpc32xx_dma_setup(host
);
752 * Scan to find existance of the device and
753 * Get the type of NAND device SMALL block or LARGE block
755 res
= nand_scan_ident(mtd
, 1, NULL
);
759 host
->dma_buf
= devm_kzalloc(&pdev
->dev
, mtd
->writesize
, GFP_KERNEL
);
760 if (!host
->dma_buf
) {
765 host
->dummy_buf
= devm_kzalloc(&pdev
->dev
, mtd
->writesize
, GFP_KERNEL
);
766 if (!host
->dummy_buf
) {
771 nand_chip
->ecc
.mode
= NAND_ECC_HW
;
772 nand_chip
->ecc
.size
= 512;
773 mtd_set_ooblayout(mtd
, &lpc32xx_ooblayout_ops
);
774 host
->mlcsubpages
= mtd
->writesize
/ 512;
776 /* initially clear interrupt status */
777 readb(MLC_IRQ_SR(host
->io_base
));
779 init_completion(&host
->comp_nand
);
780 init_completion(&host
->comp_controller
);
782 host
->irq
= platform_get_irq(pdev
, 0);
784 dev_err(&pdev
->dev
, "failed to get platform irq\n");
789 if (request_irq(host
->irq
, (irq_handler_t
)&lpc3xxx_nand_irq
,
790 IRQF_TRIGGER_HIGH
, DRV_NAME
, host
)) {
791 dev_err(&pdev
->dev
, "Error requesting NAND IRQ\n");
797 * Fills out all the uninitialized function pointers with the defaults
798 * And scans for a bad block table if appropriate.
800 res
= nand_scan_tail(mtd
);
804 mtd
->name
= DRV_NAME
;
806 res
= mtd_device_register(mtd
, host
->ncfg
->parts
,
807 host
->ncfg
->num_parts
);
814 free_irq(host
->irq
, host
);
817 dma_release_channel(host
->dma_chan
);
819 clk_disable_unprepare(host
->clk
);
823 lpc32xx_wp_enable(host
);
824 gpio_free(host
->ncfg
->wp_gpio
);
832 static int lpc32xx_nand_remove(struct platform_device
*pdev
)
834 struct lpc32xx_nand_host
*host
= platform_get_drvdata(pdev
);
835 struct mtd_info
*mtd
= nand_to_mtd(&host
->nand_chip
);
838 free_irq(host
->irq
, host
);
840 dma_release_channel(host
->dma_chan
);
842 clk_disable_unprepare(host
->clk
);
845 lpc32xx_wp_enable(host
);
846 gpio_free(host
->ncfg
->wp_gpio
);
852 static int lpc32xx_nand_resume(struct platform_device
*pdev
)
854 struct lpc32xx_nand_host
*host
= platform_get_drvdata(pdev
);
857 /* Re-enable NAND clock */
858 ret
= clk_prepare_enable(host
->clk
);
862 /* Fresh init of NAND controller */
863 lpc32xx_nand_setup(host
);
865 /* Disable write protect */
866 lpc32xx_wp_disable(host
);
871 static int lpc32xx_nand_suspend(struct platform_device
*pdev
, pm_message_t pm
)
873 struct lpc32xx_nand_host
*host
= platform_get_drvdata(pdev
);
875 /* Enable write protect for safety */
876 lpc32xx_wp_enable(host
);
879 clk_disable_unprepare(host
->clk
);
884 #define lpc32xx_nand_resume NULL
885 #define lpc32xx_nand_suspend NULL
888 static const struct of_device_id lpc32xx_nand_match
[] = {
889 { .compatible
= "nxp,lpc3220-mlc" },
892 MODULE_DEVICE_TABLE(of
, lpc32xx_nand_match
);
894 static struct platform_driver lpc32xx_nand_driver
= {
895 .probe
= lpc32xx_nand_probe
,
896 .remove
= lpc32xx_nand_remove
,
897 .resume
= lpc32xx_nand_resume
,
898 .suspend
= lpc32xx_nand_suspend
,
901 .of_match_table
= lpc32xx_nand_match
,
905 module_platform_driver(lpc32xx_nand_driver
);
907 MODULE_LICENSE("GPL");
908 MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
909 MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX MLC controller");