2 tristate "Philips/NXP SJA1000 devices"
8 tristate "ISA Bus based legacy SJA1000 driver"
10 This driver adds legacy support for SJA1000 chips connected to
11 the ISA bus using I/O port, memory mapped or indirect access.
13 config CAN_SJA1000_PLATFORM
14 tristate "Generic Platform Bus based SJA1000 driver"
16 This driver adds support for the SJA1000 chips connected to
17 the "platform bus" (Linux abstraction for directly to the
18 processor attached devices). Which can be found on various
19 boards from Phytec (http://www.phytec.de) like the PCM027,
20 PCM038. It also provides the OpenFirmware "platform bus" found
21 on embedded systems with OpenFirmware bindings, e.g. if you
22 have a PowerPC based system you may want to enable this option.
25 tristate "EMS CPC-CARD Card"
28 This driver is for the one or two channel CPC-CARD cards from
29 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
32 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
35 This driver is for the one, two or four channel CPC-PCI,
36 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
37 (http://www.ems-wuensche.de).
39 config CAN_PEAK_PCMCIA
40 tristate "PEAK PCAN-PC Card"
42 depends on HAS_IOPORT_MAP
44 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
45 from PEAK-System (http://www.peak-system.com). To compile this
46 driver as a module, choose M here: the module will be called
50 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
53 This driver is for the PCAN-PCI/PCIe/miniPCI cards
54 (1, 2, 3 or 4 channels) from PEAK-System Technik
55 (http://www.peak-system.com).
58 bool "PEAK PCAN-ExpressCard Cards"
59 depends on CAN_PEAK_PCI
64 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
65 Technik. This will also automatically select I2C and I2C_ALGO
66 configuration options.
69 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
72 This driver is for the PCIcanx and PCIcan cards (1, 2 or
73 4 channel) from Kvaser (http://www.kvaser.com).
76 tristate "PLX90xx PCI-bridge based Cards"
79 This driver is for CAN interface cards based on
80 the PLX90xx PCI bridge.
82 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
83 - Adlink PCI-7841/cPCI-7841 SE card
84 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
87 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
88 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
89 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
90 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
93 tristate "TS-CAN1 PC104 boards"
96 This driver is for Technologic Systems' TSCAN-1 PC104 boards.
97 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
98 The driver supports multiple boards and automatically configures them:
99 PLD IO base addresses are read from jumpers JP1 and JP2,
100 IRQ numbers are read from jumpers JP4 and JP5,
101 SJA1000 IO base addresses are chosen heuristically (first that works).