drivers/net/ethernet/cisco/enic/vnic_devcmd.h

   1 /*
   2  * Copyright 2008-2010 Cisco Systems, Inc.  All rights reserved.
   3  * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
   4  *
   5  * This program is free software; you may redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; version 2 of the License.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  10  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  11  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  12  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  13  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  14  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  15  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  16  * SOFTWARE.
  17  *
  18  */
  19
  20 #ifndef _VNIC_DEVCMD_H_
  21 #define _VNIC_DEVCMD_H_
  22
  23 #define _CMD_NBITS      14
  24 #define _CMD_VTYPEBITS  10
  25 #define _CMD_FLAGSBITS  6
  26 #define _CMD_DIRBITS    2
  27
  28 #define _CMD_NMASK      ((1 << _CMD_NBITS)-1)
  29 #define _CMD_VTYPEMASK  ((1 << _CMD_VTYPEBITS)-1)
  30 #define _CMD_FLAGSMASK  ((1 << _CMD_FLAGSBITS)-1)
  31 #define _CMD_DIRMASK    ((1 << _CMD_DIRBITS)-1)
  32
  33 #define _CMD_NSHIFT     0
  34 #define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
  35 #define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
  36 #define _CMD_DIRSHIFT   (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
  37
  38 /*
  39  * Direction bits (from host perspective).
  40  */
  41 #define _CMD_DIR_NONE   0U
  42 #define _CMD_DIR_WRITE  1U
  43 #define _CMD_DIR_READ   2U
  44 #define _CMD_DIR_RW     (_CMD_DIR_WRITE | _CMD_DIR_READ)
  45
  46 /*
  47  * Flag bits.
  48  */
  49 #define _CMD_FLAGS_NONE 0U
  50 #define _CMD_FLAGS_NOWAIT 1U
  51
  52 /*
  53  * vNIC type bits.
  54  */
  55 #define _CMD_VTYPE_NONE  0U
  56 #define _CMD_VTYPE_ENET  1U
  57 #define _CMD_VTYPE_FC    2U
  58 #define _CMD_VTYPE_SCSI  4U
  59 #define _CMD_VTYPE_ALL   (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
  60
  61 /*
  62  * Used to create cmds..
  63 */
  64 #define _CMDCF(dir, flags, vtype, nr)  \
  65         (((dir)   << _CMD_DIRSHIFT) | \
  66         ((flags) << _CMD_FLAGSSHIFT) | \
  67         ((vtype) << _CMD_VTYPESHIFT) | \
  68         ((nr)    << _CMD_NSHIFT))
  69 #define _CMDC(dir, vtype, nr)    _CMDCF(dir, 0, vtype, nr)
  70 #define _CMDCNW(dir, vtype, nr)  _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
  71
  72 /*
  73  * Used to decode cmds..
  74 */
  75 #define _CMD_DIR(cmd)            (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
  76 #define _CMD_FLAGS(cmd)          (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
  77 #define _CMD_VTYPE(cmd)          (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
  78 #define _CMD_N(cmd)              (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
  79
  80 enum vnic_devcmd_cmd {
  81         CMD_NONE                = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
  82
  83         /*
  84          * mcpu fw info in mem:
  85          * in:
  86          *   (u64)a0=paddr to struct vnic_devcmd_fw_info
  87          * action:
  88          *   Fills in struct vnic_devcmd_fw_info (128 bytes)
  89          * note:
  90          *   An old definition of CMD_MCPU_FW_INFO
  91          */
  92         CMD_MCPU_FW_INFO_OLD    = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
  93
  94         /*
  95          * mcpu fw info in mem:
  96          * in:
  97          *   (u64)a0=paddr to struct vnic_devcmd_fw_info
  98          *   (u16)a1=size of the structure
  99          * out:
 100          *       (u16)a1=0                          for in:a1 = 0,
 101          *               data size actually written for other values.
 102          * action:
 103          *   Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0,
 104          *            first in:a1 bytes               for 0 < in:a1 <= 132,
 105          *            132 bytes                       for other values of in:a1.
 106          * note:
 107          *   CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1
 108          *   for source compatibility.
 109          */
 110         CMD_MCPU_FW_INFO        = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1),
 111
 112         /* dev-specific block member:
 113          *    in: (u16)a0=offset,(u8)a1=size
 114          *    out: a0=value */
 115         CMD_DEV_SPEC            = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
 116
 117         /* stats clear */
 118         CMD_STATS_CLEAR         = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
 119
 120         /* stats dump in mem: (u64)a0=paddr to stats area,
 121          *                    (u16)a1=sizeof stats area */
 122         CMD_STATS_DUMP          = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
 123
 124         /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
 125         CMD_PACKET_FILTER       = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
 126
 127         /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */
 128         CMD_PACKET_FILTER_ALL   = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
 129
 130         /* hang detection notification */
 131         CMD_HANG_NOTIFY         = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
 132
 133         /* MAC address in (u48)a0 */
 134         CMD_GET_MAC_ADDR        = _CMDC(_CMD_DIR_READ,
 135                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
 136
 137         /* add addr from (u48)a0 */
 138         CMD_ADDR_ADD            = _CMDCNW(_CMD_DIR_WRITE,
 139                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
 140
 141         /* del addr from (u48)a0 */
 142         CMD_ADDR_DEL            = _CMDCNW(_CMD_DIR_WRITE,
 143                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
 144
 145         /* add VLAN id in (u16)a0 */
 146         CMD_VLAN_ADD            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
 147
 148         /* del VLAN id in (u16)a0 */
 149         CMD_VLAN_DEL            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
 150
 151         /* nic_cfg in (u32)a0 */
 152         CMD_NIC_CFG             = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
 153
 154         /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
 155         CMD_RSS_KEY             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
 156
 157         /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
 158         CMD_RSS_CPU             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
 159
 160         /* initiate softreset */
 161         CMD_SOFT_RESET          = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
 162
 163         /* softreset status:
 164          *    out: a0=0 reset complete, a0=1 reset in progress */
 165         CMD_SOFT_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
 166
 167         /* set struct vnic_devcmd_notify buffer in mem:
 168          * in:
 169          *   (u64)a0=paddr to notify (set paddr=0 to unset)
 170          *   (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
 171          *   (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
 172          * out:
 173          *   (u32)a1 = effective size
 174          */
 175         CMD_NOTIFY              = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
 176
 177         /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
 178          *           (u8)a1=PXENV_UNDI_xxx */
 179         CMD_UNDI                = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
 180
 181         /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
 182         CMD_OPEN                = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
 183
 184         /* open status:
 185          *    out: a0=0 open complete, a0=1 open in progress */
 186         CMD_OPEN_STATUS         = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
 187
 188         /* close vnic */
 189         CMD_CLOSE               = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
 190
 191         /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
 192 /***** Replaced by CMD_INIT *****/
 193         CMD_INIT_v1             = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
 194
 195         /* variant of CMD_INIT, with provisioning info
 196          *     (u64)a0=paddr of vnic_devcmd_provinfo
 197          *     (u32)a1=sizeof provision info */
 198         CMD_INIT_PROV_INFO      = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
 199
 200         /* enable virtual link */
 201         CMD_ENABLE              = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
 202
 203         /* enable virtual link, waiting variant. */
 204         CMD_ENABLE_WAIT         = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
 205
 206         /* disable virtual link */
 207         CMD_DISABLE             = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
 208
 209         /* stats dump sum of all vnic stats on same uplink in mem:
 210          *     (u64)a0=paddr
 211          *     (u16)a1=sizeof stats area */
 212         CMD_STATS_DUMP_ALL      = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
 213
 214         /* init status:
 215          *    out: a0=0 init complete, a0=1 init in progress
 216          *         if a0=0, a1=errno */
 217         CMD_INIT_STATUS         = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
 218
 219         /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
 220          *            (u32)a1=INT13_CMD_xxx */
 221         CMD_INT13               = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
 222
 223         /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
 224         CMD_LOGICAL_UPLINK      = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
 225
 226         /* undo initialize of virtual link */
 227         CMD_DEINIT              = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
 228
 229         /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
 230         CMD_INIT                = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35),
 231
 232         /* check fw capability of a cmd:
 233          * in:  (u32)a0=cmd
 234          * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
 235         CMD_CAPABILITY          = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
 236
 237         /* persistent binding info
 238          * in:  (u64)a0=paddr of arg
 239          *      (u32)a1=CMD_PERBI_XXX */
 240         CMD_PERBI               = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
 241
 242         /* Interrupt Assert Register functionality
 243          * in: (u16)a0=interrupt number to assert
 244          */
 245         CMD_IAR                 = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
 246
 247         /* initiate hangreset, like softreset after hang detected */
 248         CMD_HANG_RESET          = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
 249
 250         /* hangreset status:
 251          *    out: a0=0 reset complete, a0=1 reset in progress */
 252         CMD_HANG_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
 253
 254         /*
 255          * Set hw ingress packet vlan rewrite mode:
 256          * in:  (u32)a0=new vlan rewrite mode
 257          * out: (u32)a0=old vlan rewrite mode */
 258         CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
 259
 260         /*
 261          * in:  (u16)a0=bdf of target vnic
 262          *      (u32)a1=cmd to proxy
 263          *      a2-a15=args to cmd in a1
 264          * out: (u32)a0=status of proxied cmd
 265          *      a1-a15=out args of proxied cmd */
 266         CMD_PROXY_BY_BDF =      _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
 267
 268         /*
 269          * As for BY_BDF except a0 is index of hvnlink subordinate vnic
 270          * or SR-IOV virtual vnic
 271          */
 272         CMD_PROXY_BY_INDEX =    _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
 273
 274         /*
 275          * For HPP toggle:
 276          * adapter-info-get
 277          * in:  (u64)a0=phsical address of buffer passed in from caller.
 278          *      (u16)a1=size of buffer specified in a0.
 279          * out: (u64)a0=phsical address of buffer passed in from caller.
 280          *      (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
 281          *              0 if no VIF-CONFIG-INFO TLV was ever received. */
 282         CMD_CONFIG_INFO_GET     = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
 283
 284         /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
 285          *            (u32)a1=INT13_CMD_xxx
 286          */
 287         CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45),
 288
 289         /* Set default vlan:
 290          * in: (u16)a0=new default vlan
 291          *     (u16)a1=zero for overriding vlan with param a0,
 292          *                     non-zero for resetting vlan to the default
 293          * out: (u16)a0=old default vlan
 294          */
 295         CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46),
 296
 297         /* init_prov_info2:
 298          * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
 299          * the vnic until CMD_ENABLE2 is issued.
 300          *     (u64)a0=paddr of vnic_devcmd_provinfo
 301          *     (u32)a1=sizeof provision info
 302          */
 303         CMD_INIT_PROV_INFO2  = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
 304
 305         /* enable2:
 306          *      (u32)a0=0                  ==> standby
 307          *             =CMD_ENABLE2_ACTIVE ==> active
 308          */
 309         CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
 310
 311         /*
 312          * cmd_status:
 313          *     Returns the status of the specified command
 314          * Input:
 315          *     a0 = command for which status is being queried.
 316          *          Possible values are:
 317          *              CMD_SOFT_RESET
 318          *              CMD_HANG_RESET
 319          *              CMD_OPEN
 320          *              CMD_INIT
 321          *              CMD_INIT_PROV_INFO
 322          *              CMD_DEINIT
 323          *              CMD_INIT_PROV_INFO2
 324          *              CMD_ENABLE2
 325          * Output:
 326          *     if status == STAT_ERROR
 327          *        a0 = ERR_ENOTSUPPORTED - status for command in a0 is
 328          *                                 not supported
 329          *     if status == STAT_NONE
 330          *        a0 = status of the devcmd specified in a0 as follows.
 331          *             ERR_SUCCESS   - command in a0 completed successfully
 332          *             ERR_EINPROGRESS - command in a0 is still in progress
 333          */
 334         CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
 335
 336         /*
 337          * Returns interrupt coalescing timer conversion factors.
 338          * After calling this devcmd, ENIC driver can convert
 339          * interrupt coalescing timer in usec into CPU cycles as follows:
 340          *
 341          *   intr_timer_cycles = intr_timer_usec * multiplier / divisor
 342          *
 343          * Interrupt coalescing timer in usecs can be obtained from
 344          * CPU cycles as follows:
 345          *
 346          *   intr_timer_usec = intr_timer_cycles * divisor / multiplier
 347          *
 348          * in: none
 349          * out: (u32)a0 = multiplier
 350          *      (u32)a1 = divisor
 351          *      (u32)a2 = maximum timer value in usec
 352          */
 353         CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50),
 354
 355         /*
 356          * Set the predefined mac address as default
 357          * in:
 358          *   (u48)a0 = mac addr
 359          */
 360         CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55),
 361
 362         /* Update the provisioning info of the given VIF
 363          *     (u64)a0=paddr of vnic_devcmd_provinfo
 364          *     (u32)a1=sizeof provision info
 365          */
 366         CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56),
 367
 368         /* Initialization for the devcmd2 interface.
 369          * in: (u64) a0 = host result buffer physical address
 370          * in: (u16) a1 = number of entries in result buffer
 371          */
 372         CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57),
 373
 374         /* Add a filter.
 375          * in: (u64) a0= filter address
 376          *     (u32) a1= size of filter
 377          * out: (u32) a0=filter identifier
 378          */
 379         CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58),
 380
 381         /* Delete a filter.
 382          * in: (u32) a0=filter identifier
 383          */
 384         CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59),
 385
 386         /* Enable a Queue Pair in User space NIC
 387          * in: (u32) a0=Queue Pair number
 388          *     (u32) a1= command
 389          */
 390         CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60),
 391
 392         /* Disable a Queue Pair in User space NIC
 393          * in: (u32) a0=Queue Pair number
 394          *     (u32) a1= command
 395          */
 396         CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61),
 397
 398         /* Stats dump Queue Pair in User space NIC
 399          * in: (u32) a0=Queue Pair number
 400          *     (u64) a1=host buffer addr for status dump
 401          *     (u32) a2=length of the buffer
 402          */
 403         CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62),
 404
 405         /* Clear stats for Queue Pair in User space NIC
 406          * in: (u32) a0=Queue Pair number
 407          */
 408         CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63),
 409
 410         /* Use this devcmd for agreeing on the highest common version supported
 411          * by both driver and fw for features who need such a facility.
 412          * in:  (u64) a0 = feature (driver requests for the supported versions
 413          *      on this feature)
 414          * out: (u64) a0 = bitmap of all supported versions for that feature
 415          */
 416         CMD_GET_SUPP_FEATURE_VER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 69),
 417
 418         /* Control (Enable/Disable) overlay offloads on the given vnic
 419          * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE
 420          *          a0 = OVERLAY_FEATURE_VXLAN : VxLAN
 421          * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable or
 422          *          a1 = OVERLAY_OFFLOAD_DISABLE : Disable or
 423          *          a1 = OVERLAY_OFFLOAD_ENABLE_V2 : Enable with version 2
 424          */
 425         CMD_OVERLAY_OFFLOAD_CTRL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 72),
 426
 427         /* Configuration of overlay offloads feature on a given vNIC
 428          * in: (u8) a0 = DEVCMD_OVERLAY_NVGRE : NVGRE
 429          *          a0 = DEVCMD_OVERLAY_VXLAN : VxLAN
 430          * in: (u8) a1 = VXLAN_PORT_UPDATE : VxLAN
 431          * in: (u16) a2 = unsigned short int port information
 432          */
 433         CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73),
 434 };
 435
 436 /* CMD_ENABLE2 flags */
 437 #define CMD_ENABLE2_STANDBY 0x0
 438 #define CMD_ENABLE2_ACTIVE  0x1
 439
 440 /* flags for CMD_OPEN */
 441 #define CMD_OPENF_OPROM         0x1     /* open coming from option rom */
 442
 443 /* flags for CMD_INIT */
 444 #define CMD_INITF_DEFAULT_MAC   0x1     /* init with default mac addr */
 445
 446 /* flags for CMD_PACKET_FILTER */
 447 #define CMD_PFILTER_DIRECTED            0x01
 448 #define CMD_PFILTER_MULTICAST           0x02
 449 #define CMD_PFILTER_BROADCAST           0x04
 450 #define CMD_PFILTER_PROMISCUOUS         0x08
 451 #define CMD_PFILTER_ALL_MULTICAST       0x10
 452
 453 /* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */
 454 #define CMD_QP_RQWQ                     0x0
 455
 456 /* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */
 457 #define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK              0
 458 #define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN         1
 459 #define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN  2
 460 #define IG_VLAN_REWRITE_MODE_PASS_THRU                  3
 461
 462 enum vnic_devcmd_status {
 463         STAT_NONE = 0,
 464         STAT_BUSY = 1 << 0,     /* cmd in progress */
 465         STAT_ERROR = 1 << 1,    /* last cmd caused error (code in a0) */
 466 };
 467
 468 enum vnic_devcmd_error {
 469         ERR_SUCCESS = 0,
 470         ERR_EINVAL = 1,
 471         ERR_EFAULT = 2,
 472         ERR_EPERM = 3,
 473         ERR_EBUSY = 4,
 474         ERR_ECMDUNKNOWN = 5,
 475         ERR_EBADSTATE = 6,
 476         ERR_ENOMEM = 7,
 477         ERR_ETIMEDOUT = 8,
 478         ERR_ELINKDOWN = 9,
 479         ERR_EMAXRES = 10,
 480         ERR_ENOTSUPPORTED = 11,
 481         ERR_EINPROGRESS = 12,
 482         ERR_MAX
 483 };
 484
 485 /*
 486  * note: hw_version and asic_rev refer to the same thing,
 487  *       but have different formats. hw_version is
 488  *       a 32-byte string (e.g. "A2") and asic_rev is
 489  *       a 16-bit integer (e.g. 0xA2).
 490  */
 491 struct vnic_devcmd_fw_info {
 492         char fw_version[32];
 493         char fw_build[32];
 494         char hw_version[32];
 495         char hw_serial_number[32];
 496         u16 asic_type;
 497         u16 asic_rev;
 498 };
 499
 500 struct vnic_devcmd_notify {
 501         u32 csum;               /* checksum over following words */
 502
 503         u32 link_state;         /* link up == 1 */
 504         u32 port_speed;         /* effective port speed (rate limit) */
 505         u32 mtu;                /* MTU */
 506         u32 msglvl;             /* requested driver msg lvl */
 507         u32 uif;                /* uplink interface */
 508         u32 status;             /* status bits (see VNIC_STF_*) */
 509         u32 error;              /* error code (see ERR_*) for first ERR */
 510         u32 link_down_cnt;      /* running count of link down transitions */
 511         u32 perbi_rebuild_cnt;  /* running count of perbi rebuilds */
 512 };
 513 #define VNIC_STF_FATAL_ERR      0x0001  /* fatal fw error */
 514 #define VNIC_STF_STD_PAUSE      0x0002  /* standard link-level pause on */
 515 #define VNIC_STF_PFC_PAUSE      0x0004  /* priority flow control pause on */
 516 /* all supported status flags */
 517 #define VNIC_STF_ALL            (VNIC_STF_FATAL_ERR |\
 518                                  VNIC_STF_STD_PAUSE |\
 519                                  VNIC_STF_PFC_PAUSE |\
 520                                  0)
 521
 522 struct vnic_devcmd_provinfo {
 523         u8 oui[3];
 524         u8 type;
 525         u8 data[0];
 526 };
 527
 528 /* These are used in flags field of different filters to denote
 529  * valid fields used.
 530  */
 531 #define FILTER_FIELD_VALID(fld) (1 << (fld - 1))
 532
 533 #define FILTER_FIELDS_USNIC ( \
 534                         FILTER_FIELD_VALID(1) | \
 535                         FILTER_FIELD_VALID(2) | \
 536                         FILTER_FIELD_VALID(3) | \
 537                         FILTER_FIELD_VALID(4))
 538
 539 #define FILTER_FIELDS_IPV4_5TUPLE ( \
 540                         FILTER_FIELD_VALID(1) | \
 541                         FILTER_FIELD_VALID(2) | \
 542                         FILTER_FIELD_VALID(3) | \
 543                         FILTER_FIELD_VALID(4) | \
 544                         FILTER_FIELD_VALID(5))
 545
 546 #define FILTER_FIELDS_MAC_VLAN ( \
 547                         FILTER_FIELD_VALID(1) | \
 548                         FILTER_FIELD_VALID(2))
 549
 550 #define FILTER_FIELD_USNIC_VLAN    FILTER_FIELD_VALID(1)
 551 #define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2)
 552 #define FILTER_FIELD_USNIC_PROTO   FILTER_FIELD_VALID(3)
 553 #define FILTER_FIELD_USNIC_ID      FILTER_FIELD_VALID(4)
 554
 555 struct filter_usnic_id {
 556         u32 flags;
 557         u16 vlan;
 558         u16 ethtype;
 559         u8 proto_version;
 560         u32 usnic_id;
 561 } __packed;
 562
 563 #define FILTER_FIELD_5TUP_PROTO  FILTER_FIELD_VALID(1)
 564 #define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2)
 565 #define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3)
 566 #define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4)
 567 #define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5)
 568
 569 /* Enums for the protocol field. */
 570 enum protocol_e {
 571         PROTO_UDP = 0,
 572         PROTO_TCP = 1,
 573 };
 574
 575 struct filter_ipv4_5tuple {
 576         u32 flags;
 577         u32 protocol;
 578         u32 src_addr;
 579         u32 dst_addr;
 580         u16 src_port;
 581         u16 dst_port;
 582 } __packed;
 583
 584 #define FILTER_FIELD_VMQ_VLAN   FILTER_FIELD_VALID(1)
 585 #define FILTER_FIELD_VMQ_MAC    FILTER_FIELD_VALID(2)
 586
 587 struct filter_mac_vlan {
 588         u32 flags;
 589         u16 vlan;
 590         u8 mac_addr[6];
 591 } __packed;
 592
 593 /* Specifies the filter_action type. */
 594 enum {
 595         FILTER_ACTION_RQ_STEERING = 0,
 596         FILTER_ACTION_MAX
 597 };
 598
 599 struct filter_action {
 600         u32 type;
 601         union {
 602                 u32 rq_idx;
 603         } u;
 604 } __packed;
 605
 606 /* Specifies the filter type. */
 607 enum filter_type {
 608         FILTER_USNIC_ID = 0,
 609         FILTER_IPV4_5TUPLE = 1,
 610         FILTER_MAC_VLAN = 2,
 611         FILTER_MAX
 612 };
 613
 614 struct filter {
 615         u32 type;
 616         union {
 617                 struct filter_usnic_id usnic;
 618                 struct filter_ipv4_5tuple ipv4;
 619                 struct filter_mac_vlan mac_vlan;
 620         } u;
 621 } __packed;
 622
 623 enum {
 624         CLSF_TLV_FILTER = 0,
 625         CLSF_TLV_ACTION = 1,
 626 };
 627
 628 /* Maximum size of buffer to CMD_ADD_FILTER */
 629 #define FILTER_MAX_BUF_SIZE 100
 630
 631 struct filter_tlv {
 632         u_int32_t type;
 633         u_int32_t length;
 634         u_int32_t val[0];
 635 };
 636
 637 enum {
 638         CLSF_ADD = 0,
 639         CLSF_DEL = 1,
 640 };
 641
 642 /*
 643  * Writing cmd register causes STAT_BUSY to get set in status register.
 644  * When cmd completes, STAT_BUSY will be cleared.
 645  *
 646  * If cmd completed successfully STAT_ERROR will be clear
 647  * and args registers contain cmd-specific results.
 648  *
 649  * If cmd error, STAT_ERROR will be set and args[0] contains error code.
 650  *
 651  * status register is read-only.  While STAT_BUSY is set,
 652  * all other register contents are read-only.
 653  */
 654
 655 /* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
 656 #define VNIC_DEVCMD_NARGS 15
 657 struct vnic_devcmd {
 658         u32 status;                     /* RO */
 659         u32 cmd;                        /* RW */
 660         u64 args[VNIC_DEVCMD_NARGS];    /* RW cmd args (little-endian) */
 661 };
 662
 663 #define DEVCMD2_FNORESULT       0x1     /* Don't copy result to host */
 664
 665 #define VNIC_DEVCMD2_NARGS      VNIC_DEVCMD_NARGS
 666 struct vnic_devcmd2 {
 667         u16 pad;
 668         u16 flags;
 669         u32 cmd;
 670         u64 args[VNIC_DEVCMD2_NARGS];
 671 };
 672
 673 #define VNIC_DEVCMD2_NRESULTS   VNIC_DEVCMD_NARGS
 674 struct devcmd2_result {
 675         u64 results[VNIC_DEVCMD2_NRESULTS];
 676         u32 pad;
 677         u16 completed_index;
 678         u8  error;
 679         u8  color;
 680 };
 681
 682 #define DEVCMD2_RING_SIZE       32
 683 #define DEVCMD2_DESC_SIZE       128
 684
 685 enum overlay_feature_t {
 686         OVERLAY_FEATURE_NVGRE = 1,
 687         OVERLAY_FEATURE_VXLAN,
 688         OVERLAY_FEATURE_MAX,
 689 };
 690
 691 enum overlay_ofld_cmd {
 692         OVERLAY_OFFLOAD_ENABLE,
 693         OVERLAY_OFFLOAD_DISABLE,
 694         OVERLAY_OFFLOAD_ENABLE_P2,
 695         OVERLAY_OFFLOAD_MAX,
 696 };
 697
 698 #define OVERLAY_CFG_VXLAN_PORT_UPDATE   0
 699
 700 /* Use this enum to get the supported versions for each of these features
 701  * If you need to use the devcmd_get_supported_feature_version(), add
 702  * the new feature into this enum and install function handler in devcmd.c
 703  */
 704 enum vic_feature_t {
 705         VIC_FEATURE_VXLAN,
 706         VIC_FEATURE_RDMA,
 707         VIC_FEATURE_VXLAN_PATCH,
 708         VIC_FEATURE_MAX,
 709 };
 710
 711 #endif /* _VNIC_DEVCMD_H_ */