drivers/net/phy/dp83822.c

   1 /*
   2  * Driver for the Texas Instruments DP83822 PHY
   3  *
   4  * Copyright (C) 2017 Texas Instruments Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #include <linux/ethtool.h>
  17 #include <linux/etherdevice.h>
  18 #include <linux/kernel.h>
  19 #include <linux/mii.h>
  20 #include <linux/module.h>
  21 #include <linux/of.h>
  22 #include <linux/phy.h>
  23 #include <linux/netdevice.h>
  24
  25 #define DP83822_PHY_ID          0x2000a240
  26 #define DP83822_DEVADDR         0x1f
  27
  28 #define MII_DP83822_PHYSCR      0x11
  29 #define MII_DP83822_MISR1       0x12
  30 #define MII_DP83822_MISR2       0x13
  31 #define MII_DP83822_RESET_CTRL  0x1f
  32
  33 #define DP83822_HW_RESET        BIT(15)
  34 #define DP83822_SW_RESET        BIT(14)
  35
  36 /* PHYSCR Register Fields */
  37 #define DP83822_PHYSCR_INT_OE           BIT(0) /* Interrupt Output Enable */
  38 #define DP83822_PHYSCR_INTEN            BIT(1) /* Interrupt Enable */
  39
  40 /* MISR1 bits */
  41 #define DP83822_RX_ERR_HF_INT_EN        BIT(0)
  42 #define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
  43 #define DP83822_ANEG_COMPLETE_INT_EN    BIT(2)
  44 #define DP83822_DUP_MODE_CHANGE_INT_EN  BIT(3)
  45 #define DP83822_SPEED_CHANGED_INT_EN    BIT(4)
  46 #define DP83822_LINK_STAT_INT_EN        BIT(5)
  47 #define DP83822_ENERGY_DET_INT_EN       BIT(6)
  48 #define DP83822_LINK_QUAL_INT_EN        BIT(7)
  49
  50 /* MISR2 bits */
  51 #define DP83822_JABBER_DET_INT_EN       BIT(0)
  52 #define DP83822_WOL_PKT_INT_EN          BIT(1)
  53 #define DP83822_SLEEP_MODE_INT_EN       BIT(2)
  54 #define DP83822_MDI_XOVER_INT_EN        BIT(3)
  55 #define DP83822_LB_FIFO_INT_EN          BIT(4)
  56 #define DP83822_PAGE_RX_INT_EN          BIT(5)
  57 #define DP83822_ANEG_ERR_INT_EN         BIT(6)
  58 #define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)
  59
  60 /* INT_STAT1 bits */
  61 #define DP83822_WOL_INT_EN      BIT(4)
  62 #define DP83822_WOL_INT_STAT    BIT(12)
  63
  64 #define MII_DP83822_RXSOP1      0x04a5
  65 #define MII_DP83822_RXSOP2      0x04a6
  66 #define MII_DP83822_RXSOP3      0x04a7
  67
  68 /* WoL Registers */
  69 #define MII_DP83822_WOL_CFG     0x04a0
  70 #define MII_DP83822_WOL_STAT    0x04a1
  71 #define MII_DP83822_WOL_DA1     0x04a2
  72 #define MII_DP83822_WOL_DA2     0x04a3
  73 #define MII_DP83822_WOL_DA3     0x04a4
  74
  75 /* WoL bits */
  76 #define DP83822_WOL_MAGIC_EN    BIT(0)
  77 #define DP83822_WOL_SECURE_ON   BIT(5)
  78 #define DP83822_WOL_EN          BIT(7)
  79 #define DP83822_WOL_INDICATION_SEL BIT(8)
  80 #define DP83822_WOL_CLR_INDICATION BIT(11)
  81
  82 static int dp83822_ack_interrupt(struct phy_device *phydev)
  83 {
  84         int err;
  85
  86         err = phy_read(phydev, MII_DP83822_MISR1);
  87         if (err < 0)
  88                 return err;
  89
  90         err = phy_read(phydev, MII_DP83822_MISR2);
  91         if (err < 0)
  92                 return err;
  93
  94         return 0;
  95 }
  96
  97 static int dp83822_set_wol(struct phy_device *phydev,
  98                            struct ethtool_wolinfo *wol)
  99 {
 100         struct net_device *ndev = phydev->attached_dev;
 101         u16 value;
 102         const u8 *mac;
 103
 104         if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
 105                 mac = (const u8 *)ndev->dev_addr;
 106
 107                 if (!is_valid_ether_addr(mac))
 108                         return -EINVAL;
 109
 110                 /* MAC addresses start with byte 5, but stored in mac[0].
 111                  * 822 PHYs store bytes 4|5, 2|3, 0|1
 112                  */
 113                 phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
 114                               (mac[1] << 8) | mac[0]);
 115                 phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
 116                               (mac[3] << 8) | mac[2]);
 117                 phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
 118                               (mac[5] << 8) | mac[4]);
 119
 120                 value = phy_read_mmd(phydev, DP83822_DEVADDR,
 121                                      MII_DP83822_WOL_CFG);
 122                 if (wol->wolopts & WAKE_MAGIC)
 123                         value |= DP83822_WOL_MAGIC_EN;
 124                 else
 125                         value &= ~DP83822_WOL_MAGIC_EN;
 126
 127                 if (wol->wolopts & WAKE_MAGICSECURE) {
 128                         phy_write_mmd(phydev, DP83822_DEVADDR,
 129                                       MII_DP83822_RXSOP1,
 130                                       (wol->sopass[1] << 8) | wol->sopass[0]);
 131                         phy_write_mmd(phydev, DP83822_DEVADDR,
 132                                       MII_DP83822_RXSOP2,
 133                                       (wol->sopass[3] << 8) | wol->sopass[2]);
 134                         phy_write_mmd(phydev, DP83822_DEVADDR,
 135                                       MII_DP83822_RXSOP3,
 136                                       (wol->sopass[5] << 8) | wol->sopass[4]);
 137                         value |= DP83822_WOL_SECURE_ON;
 138                 } else {
 139                         value &= ~DP83822_WOL_SECURE_ON;
 140                 }
 141
 142                 value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
 143                           DP83822_WOL_CLR_INDICATION);
 144                 phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
 145                               value);
 146         } else {
 147                 value = phy_read_mmd(phydev, DP83822_DEVADDR,
 148                                      MII_DP83822_WOL_CFG);
 149                 value &= ~DP83822_WOL_EN;
 150                 phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
 151                               value);
 152         }
 153
 154         return 0;
 155 }
 156
 157 static void dp83822_get_wol(struct phy_device *phydev,
 158                             struct ethtool_wolinfo *wol)
 159 {
 160         int value;
 161         u16 sopass_val;
 162
 163         wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
 164         wol->wolopts = 0;
 165
 166         value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
 167
 168         if (value & DP83822_WOL_MAGIC_EN)
 169                 wol->wolopts |= WAKE_MAGIC;
 170
 171         if (value & DP83822_WOL_SECURE_ON) {
 172                 sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 173                                           MII_DP83822_RXSOP1);
 174                 wol->sopass[0] = (sopass_val & 0xff);
 175                 wol->sopass[1] = (sopass_val >> 8);
 176
 177                 sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 178                                           MII_DP83822_RXSOP2);
 179                 wol->sopass[2] = (sopass_val & 0xff);
 180                 wol->sopass[3] = (sopass_val >> 8);
 181
 182                 sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 183                                           MII_DP83822_RXSOP3);
 184                 wol->sopass[4] = (sopass_val & 0xff);
 185                 wol->sopass[5] = (sopass_val >> 8);
 186
 187                 wol->wolopts |= WAKE_MAGICSECURE;
 188         }
 189
 190         /* WoL is not enabled so set wolopts to 0 */
 191         if (!(value & DP83822_WOL_EN))
 192                 wol->wolopts = 0;
 193 }
 194
 195 static int dp83822_config_intr(struct phy_device *phydev)
 196 {
 197         int misr_status;
 198         int physcr_status;
 199         int err;
 200
 201         if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 202                 misr_status = phy_read(phydev, MII_DP83822_MISR1);
 203                 if (misr_status < 0)
 204                         return misr_status;
 205
 206                 misr_status |= (DP83822_RX_ERR_HF_INT_EN |
 207                                 DP83822_FALSE_CARRIER_HF_INT_EN |
 208                                 DP83822_ANEG_COMPLETE_INT_EN |
 209                                 DP83822_DUP_MODE_CHANGE_INT_EN |
 210                                 DP83822_SPEED_CHANGED_INT_EN |
 211                                 DP83822_LINK_STAT_INT_EN |
 212                                 DP83822_ENERGY_DET_INT_EN |
 213                                 DP83822_LINK_QUAL_INT_EN);
 214
 215                 err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
 216                 if (err < 0)
 217                         return err;
 218
 219                 misr_status = phy_read(phydev, MII_DP83822_MISR2);
 220                 if (misr_status < 0)
 221                         return misr_status;
 222
 223                 misr_status |= (DP83822_JABBER_DET_INT_EN |
 224                                 DP83822_WOL_PKT_INT_EN |
 225                                 DP83822_SLEEP_MODE_INT_EN |
 226                                 DP83822_MDI_XOVER_INT_EN |
 227                                 DP83822_LB_FIFO_INT_EN |
 228                                 DP83822_PAGE_RX_INT_EN |
 229                                 DP83822_ANEG_ERR_INT_EN |
 230                                 DP83822_EEE_ERROR_CHANGE_INT_EN);
 231
 232                 err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
 233                 if (err < 0)
 234                         return err;
 235
 236                 physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
 237                 if (physcr_status < 0)
 238                         return physcr_status;
 239
 240                 physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;
 241
 242         } else {
 243                 err = phy_write(phydev, MII_DP83822_MISR1, 0);
 244                 if (err < 0)
 245                         return err;
 246
 247                 err = phy_write(phydev, MII_DP83822_MISR1, 0);
 248                 if (err < 0)
 249                         return err;
 250
 251                 physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
 252                 if (physcr_status < 0)
 253                         return physcr_status;
 254
 255                 physcr_status &= ~DP83822_PHYSCR_INTEN;
 256         }
 257
 258         return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
 259 }
 260
 261 static int dp83822_config_init(struct phy_device *phydev)
 262 {
 263         int err;
 264         int value;
 265
 266         err = genphy_config_init(phydev);
 267         if (err < 0)
 268                 return err;
 269
 270         value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN;
 271
 272         return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
 273               value);
 274 }
 275
 276 static int dp83822_phy_reset(struct phy_device *phydev)
 277 {
 278         int err;
 279
 280         err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
 281         if (err < 0)
 282                 return err;
 283
 284         dp83822_config_init(phydev);
 285
 286         return 0;
 287 }
 288
 289 static int dp83822_suspend(struct phy_device *phydev)
 290 {
 291         int value;
 292
 293         value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
 294
 295         if (!(value & DP83822_WOL_EN))
 296                 genphy_suspend(phydev);
 297
 298         return 0;
 299 }
 300
 301 static int dp83822_resume(struct phy_device *phydev)
 302 {
 303         int value;
 304
 305         genphy_resume(phydev);
 306
 307         value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
 308
 309         phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
 310                       DP83822_WOL_CLR_INDICATION);
 311
 312         return 0;
 313 }
 314
 315 static struct phy_driver dp83822_driver[] = {
 316         {
 317                 .phy_id = DP83822_PHY_ID,
 318                 .phy_id_mask = 0xfffffff0,
 319                 .name = "TI DP83822",
 320                 .features = PHY_BASIC_FEATURES,
 321                 .flags = PHY_HAS_INTERRUPT,
 322                 .config_init = dp83822_config_init,
 323                 .soft_reset = dp83822_phy_reset,
 324                 .get_wol = dp83822_get_wol,
 325                 .set_wol = dp83822_set_wol,
 326                 .ack_interrupt = dp83822_ack_interrupt,
 327                 .config_intr = dp83822_config_intr,
 328                 .suspend = dp83822_suspend,
 329                 .resume = dp83822_resume,
 330          },
 331 };
 332 module_phy_driver(dp83822_driver);
 333
 334 static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
 335         { DP83822_PHY_ID, 0xfffffff0 },
 336         { },
 337 };
 338 MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
 339
 340 MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
 341 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
 342 MODULE_LICENSE("GPL");