drivers/net/wan/x25_asy.c

   1 /*
   2  *      Things to sort out:
   3  *
   4  *      o       tbusy handling
   5  *      o       allow users to set the parameters
   6  *      o       sync/async switching ?
   7  *
   8  *      Note: This does _not_ implement CCITT X.25 asynchronous framing
   9  *      recommendations. Its primarily for testing purposes. If you wanted
  10  *      to do CCITT then in theory all you need is to nick the HDLC async
  11  *      checksum routines from ppp.c
  12  *      Changes:
  13  *
  14  *      2000-10-29      Henner Eisen    lapb_data_indication() return status.
  15  */
  16
  17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  18
  19 #include <linux/module.h>
  20
  21 #include <linux/uaccess.h>
  22 #include <linux/bitops.h>
  23 #include <linux/string.h>
  24 #include <linux/mm.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/in.h>
  27 #include <linux/tty.h>
  28 #include <linux/errno.h>
  29 #include <linux/netdevice.h>
  30 #include <linux/etherdevice.h>
  31 #include <linux/skbuff.h>
  32 #include <linux/if_arp.h>
  33 #include <linux/lapb.h>
  34 #include <linux/init.h>
  35 #include <linux/rtnetlink.h>
  36 #include <linux/compat.h>
  37 #include <linux/slab.h>
  38 #include <net/x25device.h>
  39 #include "x25_asy.h"
  40
  41 static struct net_device **x25_asy_devs;
  42 static int x25_asy_maxdev = SL_NRUNIT;
  43
  44 module_param(x25_asy_maxdev, int, 0);
  45 MODULE_LICENSE("GPL");
  46
  47 static int x25_asy_esc(unsigned char *p, unsigned char *d, int len);
  48 static void x25_asy_unesc(struct x25_asy *sl, unsigned char c);
  49 static void x25_asy_setup(struct net_device *dev);
  50
  51 /* Find a free X.25 channel, and link in this `tty' line. */
  52 static struct x25_asy *x25_asy_alloc(void)
  53 {
  54         struct net_device *dev = NULL;
  55         struct x25_asy *sl;
  56         int i;
  57
  58         if (x25_asy_devs == NULL)
  59                 return NULL;    /* Master array missing ! */
  60
  61         for (i = 0; i < x25_asy_maxdev; i++) {
  62                 dev = x25_asy_devs[i];
  63
  64                 /* Not allocated ? */
  65                 if (dev == NULL)
  66                         break;
  67
  68                 sl = netdev_priv(dev);
  69                 /* Not in use ? */
  70                 if (!test_and_set_bit(SLF_INUSE, &sl->flags))
  71                         return sl;
  72         }
  73
  74
  75         /* Sorry, too many, all slots in use */
  76         if (i >= x25_asy_maxdev)
  77                 return NULL;
  78
  79         /* If no channels are available, allocate one */
  80         if (!dev) {
  81                 char name[IFNAMSIZ];
  82                 sprintf(name, "x25asy%d", i);
  83
  84                 dev = alloc_netdev(sizeof(struct x25_asy), name,
  85                                    NET_NAME_UNKNOWN, x25_asy_setup);
  86                 if (!dev)
  87                         return NULL;
  88
  89                 /* Initialize channel control data */
  90                 sl = netdev_priv(dev);
  91                 dev->base_addr    = i;
  92
  93                 /* register device so that it can be ifconfig'ed       */
  94                 if (register_netdev(dev) == 0) {
  95                         /* (Re-)Set the INUSE bit.   Very Important! */
  96                         set_bit(SLF_INUSE, &sl->flags);
  97                         x25_asy_devs[i] = dev;
  98                         return sl;
  99                 } else {
 100                         pr_warn("%s(): register_netdev() failure\n", __func__);
 101                         free_netdev(dev);
 102                 }
 103         }
 104         return NULL;
 105 }
 106
 107
 108 /* Free an X.25 channel. */
 109 static void x25_asy_free(struct x25_asy *sl)
 110 {
 111         /* Free all X.25 frame buffers. */
 112         kfree(sl->rbuff);
 113         sl->rbuff = NULL;
 114         kfree(sl->xbuff);
 115         sl->xbuff = NULL;
 116
 117         if (!test_and_clear_bit(SLF_INUSE, &sl->flags))
 118                 netdev_err(sl->dev, "x25_asy_free for already free unit\n");
 119 }
 120
 121 static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
 122 {
 123         struct x25_asy *sl = netdev_priv(dev);
 124         unsigned char *xbuff, *rbuff;
 125         int len;
 126
 127         len = 2 * newmtu;
 128         xbuff = kmalloc(len + 4, GFP_ATOMIC);
 129         rbuff = kmalloc(len + 4, GFP_ATOMIC);
 130
 131         if (xbuff == NULL || rbuff == NULL) {
 132                 kfree(xbuff);
 133                 kfree(rbuff);
 134                 return -ENOMEM;
 135         }
 136
 137         spin_lock_bh(&sl->lock);
 138         xbuff    = xchg(&sl->xbuff, xbuff);
 139         if (sl->xleft)  {
 140                 if (sl->xleft <= len)  {
 141                         memcpy(sl->xbuff, sl->xhead, sl->xleft);
 142                 } else  {
 143                         sl->xleft = 0;
 144                         dev->stats.tx_dropped++;
 145                 }
 146         }
 147         sl->xhead = sl->xbuff;
 148
 149         rbuff    = xchg(&sl->rbuff, rbuff);
 150         if (sl->rcount)  {
 151                 if (sl->rcount <= len) {
 152                         memcpy(sl->rbuff, rbuff, sl->rcount);
 153                 } else  {
 154                         sl->rcount = 0;
 155                         dev->stats.rx_over_errors++;
 156                         set_bit(SLF_ERROR, &sl->flags);
 157                 }
 158         }
 159
 160         dev->mtu    = newmtu;
 161         sl->buffsize = len;
 162
 163         spin_unlock_bh(&sl->lock);
 164
 165         kfree(xbuff);
 166         kfree(rbuff);
 167         return 0;
 168 }
 169
 170
 171 /* Set the "sending" flag.  This must be atomic, hence the ASM. */
 172
 173 static inline void x25_asy_lock(struct x25_asy *sl)
 174 {
 175         netif_stop_queue(sl->dev);
 176 }
 177
 178
 179 /* Clear the "sending" flag.  This must be atomic, hence the ASM. */
 180
 181 static inline void x25_asy_unlock(struct x25_asy *sl)
 182 {
 183         netif_wake_queue(sl->dev);
 184 }
 185
 186 /* Send one completely decapsulated IP datagram to the IP layer. */
 187
 188 static void x25_asy_bump(struct x25_asy *sl)
 189 {
 190         struct net_device *dev = sl->dev;
 191         struct sk_buff *skb;
 192         int count;
 193         int err;
 194
 195         count = sl->rcount;
 196         dev->stats.rx_bytes += count;
 197
 198         skb = dev_alloc_skb(count+1);
 199         if (skb == NULL) {
 200                 netdev_warn(sl->dev, "memory squeeze, dropping packet\n");
 201                 dev->stats.rx_dropped++;
 202                 return;
 203         }
 204         skb_push(skb, 1);       /* LAPB internal control */
 205         skb_put_data(skb, sl->rbuff, count);
 206         skb->protocol = x25_type_trans(skb, sl->dev);
 207         err = lapb_data_received(skb->dev, skb);
 208         if (err != LAPB_OK) {
 209                 kfree_skb(skb);
 210                 printk(KERN_DEBUG "x25_asy: data received err - %d\n", err);
 211         } else {
 212                 netif_rx(skb);
 213                 dev->stats.rx_packets++;
 214         }
 215 }
 216
 217 /* Encapsulate one IP datagram and stuff into a TTY queue. */
 218 static void x25_asy_encaps(struct x25_asy *sl, unsigned char *icp, int len)
 219 {
 220         unsigned char *p;
 221         int actual, count, mtu = sl->dev->mtu;
 222
 223         if (len > mtu) {
 224                 /* Sigh, shouldn't occur BUT ... */
 225                 len = mtu;
 226                 printk(KERN_DEBUG "%s: truncating oversized transmit packet!\n",
 227                                         sl->dev->name);
 228                 sl->dev->stats.tx_dropped++;
 229                 x25_asy_unlock(sl);
 230                 return;
 231         }
 232
 233         p = icp;
 234         count = x25_asy_esc(p, sl->xbuff, len);
 235
 236         /* Order of next two lines is *very* important.
 237          * When we are sending a little amount of data,
 238          * the transfer may be completed inside driver.write()
 239          * routine, because it's running with interrupts enabled.
 240          * In this case we *never* got WRITE_WAKEUP event,
 241          * if we did not request it before write operation.
 242          *       14 Oct 1994  Dmitry Gorodchanin.
 243          */
 244         set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 245         actual = sl->tty->ops->write(sl->tty, sl->xbuff, count);
 246         sl->xleft = count - actual;
 247         sl->xhead = sl->xbuff + actual;
 248         /* VSV */
 249         clear_bit(SLF_OUTWAIT, &sl->flags);     /* reset outfill flag */
 250 }
 251
 252 /*
 253  * Called by the driver when there's room for more data.  If we have
 254  * more packets to send, we send them here.
 255  */
 256 static void x25_asy_write_wakeup(struct tty_struct *tty)
 257 {
 258         int actual;
 259         struct x25_asy *sl = tty->disc_data;
 260
 261         /* First make sure we're connected. */
 262         if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev))
 263                 return;
 264
 265         if (sl->xleft <= 0) {
 266                 /* Now serial buffer is almost free & we can start
 267                  * transmission of another packet */
 268                 sl->dev->stats.tx_packets++;
 269                 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 270                 x25_asy_unlock(sl);
 271                 return;
 272         }
 273
 274         actual = tty->ops->write(tty, sl->xhead, sl->xleft);
 275         sl->xleft -= actual;
 276         sl->xhead += actual;
 277 }
 278
 279 static void x25_asy_timeout(struct net_device *dev)
 280 {
 281         struct x25_asy *sl = netdev_priv(dev);
 282
 283         spin_lock(&sl->lock);
 284         if (netif_queue_stopped(dev)) {
 285                 /* May be we must check transmitter timeout here ?
 286                  *      14 Oct 1994 Dmitry Gorodchanin.
 287                  */
 288                 netdev_warn(dev, "transmit timed out, %s?\n",
 289                             (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
 290                             "bad line quality" : "driver error");
 291                 sl->xleft = 0;
 292                 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 293                 x25_asy_unlock(sl);
 294         }
 295         spin_unlock(&sl->lock);
 296 }
 297
 298 /* Encapsulate an IP datagram and kick it into a TTY queue. */
 299
 300 static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
 301                                       struct net_device *dev)
 302 {
 303         struct x25_asy *sl = netdev_priv(dev);
 304         int err;
 305
 306         if (!netif_running(sl->dev)) {
 307                 netdev_err(dev, "xmit call when iface is down\n");
 308                 kfree_skb(skb);
 309                 return NETDEV_TX_OK;
 310         }
 311
 312         switch (skb->data[0]) {
 313         case X25_IFACE_DATA:
 314                 break;
 315         case X25_IFACE_CONNECT: /* Connection request .. do nothing */
 316                 err = lapb_connect_request(dev);
 317                 if (err != LAPB_OK)
 318                         netdev_err(dev, "lapb_connect_request error: %d\n",
 319                                    err);
 320                 kfree_skb(skb);
 321                 return NETDEV_TX_OK;
 322         case X25_IFACE_DISCONNECT: /* do nothing - hang up ?? */
 323                 err = lapb_disconnect_request(dev);
 324                 if (err != LAPB_OK)
 325                         netdev_err(dev, "lapb_disconnect_request error: %d\n",
 326                                    err);
 327                 /* fall through */
 328         default:
 329                 kfree_skb(skb);
 330                 return NETDEV_TX_OK;
 331         }
 332         skb_pull(skb, 1);       /* Remove control byte */
 333         /*
 334          * If we are busy already- too bad.  We ought to be able
 335          * to queue things at this point, to allow for a little
 336          * frame buffer.  Oh well...
 337          * -----------------------------------------------------
 338          * I hate queues in X.25 driver. May be it's efficient,
 339          * but for me latency is more important. ;)
 340          * So, no queues !
 341          *        14 Oct 1994  Dmitry Gorodchanin.
 342          */
 343
 344         err = lapb_data_request(dev, skb);
 345         if (err != LAPB_OK) {
 346                 netdev_err(dev, "lapb_data_request error: %d\n", err);
 347                 kfree_skb(skb);
 348                 return NETDEV_TX_OK;
 349         }
 350         return NETDEV_TX_OK;
 351 }
 352
 353
 354 /*
 355  *      LAPB interface boilerplate
 356  */
 357
 358 /*
 359  *      Called when I frame data arrives. We did the work above - throw it
 360  *      at the net layer.
 361  */
 362
 363 static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb)
 364 {
 365         return netif_rx(skb);
 366 }
 367
 368 /*
 369  *      Data has emerged from the LAPB protocol machine. We don't handle
 370  *      busy cases too well. Its tricky to see how to do this nicely -
 371  *      perhaps lapb should allow us to bounce this ?
 372  */
 373
 374 static void x25_asy_data_transmit(struct net_device *dev, struct sk_buff *skb)
 375 {
 376         struct x25_asy *sl = netdev_priv(dev);
 377
 378         spin_lock(&sl->lock);
 379         if (netif_queue_stopped(sl->dev) || sl->tty == NULL) {
 380                 spin_unlock(&sl->lock);
 381                 netdev_err(dev, "tbusy drop\n");
 382                 kfree_skb(skb);
 383                 return;
 384         }
 385         /* We were not busy, so we are now... :-) */
 386         if (skb != NULL) {
 387                 x25_asy_lock(sl);
 388                 dev->stats.tx_bytes += skb->len;
 389                 x25_asy_encaps(sl, skb->data, skb->len);
 390                 dev_kfree_skb(skb);
 391         }
 392         spin_unlock(&sl->lock);
 393 }
 394
 395 /*
 396  *      LAPB connection establish/down information.
 397  */
 398
 399 static void x25_asy_connected(struct net_device *dev, int reason)
 400 {
 401         struct x25_asy *sl = netdev_priv(dev);
 402         struct sk_buff *skb;
 403         unsigned char *ptr;
 404
 405         skb = dev_alloc_skb(1);
 406         if (skb == NULL) {
 407                 netdev_err(dev, "out of memory\n");
 408                 return;
 409         }
 410
 411         ptr  = skb_put(skb, 1);
 412         *ptr = X25_IFACE_CONNECT;
 413
 414         skb->protocol = x25_type_trans(skb, sl->dev);
 415         netif_rx(skb);
 416 }
 417
 418 static void x25_asy_disconnected(struct net_device *dev, int reason)
 419 {
 420         struct x25_asy *sl = netdev_priv(dev);
 421         struct sk_buff *skb;
 422         unsigned char *ptr;
 423
 424         skb = dev_alloc_skb(1);
 425         if (skb == NULL) {
 426                 netdev_err(dev, "out of memory\n");
 427                 return;
 428         }
 429
 430         ptr  = skb_put(skb, 1);
 431         *ptr = X25_IFACE_DISCONNECT;
 432
 433         skb->protocol = x25_type_trans(skb, sl->dev);
 434         netif_rx(skb);
 435 }
 436
 437 static const struct lapb_register_struct x25_asy_callbacks = {
 438         .connect_confirmation = x25_asy_connected,
 439         .connect_indication = x25_asy_connected,
 440         .disconnect_confirmation = x25_asy_disconnected,
 441         .disconnect_indication = x25_asy_disconnected,
 442         .data_indication = x25_asy_data_indication,
 443         .data_transmit = x25_asy_data_transmit,
 444 };
 445
 446
 447 /* Open the low-level part of the X.25 channel. Easy! */
 448 static int x25_asy_open(struct net_device *dev)
 449 {
 450         struct x25_asy *sl = netdev_priv(dev);
 451         unsigned long len;
 452         int err;
 453
 454         if (sl->tty == NULL)
 455                 return -ENODEV;
 456
 457         /*
 458          * Allocate the X.25 frame buffers:
 459          *
 460          * rbuff        Receive buffer.
 461          * xbuff        Transmit buffer.
 462          */
 463
 464         len = dev->mtu * 2;
 465
 466         sl->rbuff = kmalloc(len + 4, GFP_KERNEL);
 467         if (sl->rbuff == NULL)
 468                 goto norbuff;
 469         sl->xbuff = kmalloc(len + 4, GFP_KERNEL);
 470         if (sl->xbuff == NULL)
 471                 goto noxbuff;
 472
 473         sl->buffsize = len;
 474         sl->rcount   = 0;
 475         sl->xleft    = 0;
 476         sl->flags   &= (1 << SLF_INUSE);      /* Clear ESCAPE & ERROR flags */
 477
 478         netif_start_queue(dev);
 479
 480         /*
 481          *      Now attach LAPB
 482          */
 483         err = lapb_register(dev, &x25_asy_callbacks);
 484         if (err == LAPB_OK)
 485                 return 0;
 486
 487         /* Cleanup */
 488         kfree(sl->xbuff);
 489 noxbuff:
 490         kfree(sl->rbuff);
 491 norbuff:
 492         return -ENOMEM;
 493 }
 494
 495
 496 /* Close the low-level part of the X.25 channel. Easy! */
 497 static int x25_asy_close(struct net_device *dev)
 498 {
 499         struct x25_asy *sl = netdev_priv(dev);
 500
 501         spin_lock(&sl->lock);
 502         if (sl->tty)
 503                 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 504
 505         netif_stop_queue(dev);
 506         sl->rcount = 0;
 507         sl->xleft  = 0;
 508         spin_unlock(&sl->lock);
 509         return 0;
 510 }
 511
 512 /*
 513  * Handle the 'receiver data ready' interrupt.
 514  * This function is called by the 'tty_io' module in the kernel when
 515  * a block of X.25 data has been received, which can now be decapsulated
 516  * and sent on to some IP layer for further processing.
 517  */
 518
 519 static void x25_asy_receive_buf(struct tty_struct *tty,
 520                                 const unsigned char *cp, char *fp, int count)
 521 {
 522         struct x25_asy *sl = tty->disc_data;
 523
 524         if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev))
 525                 return;
 526
 527
 528         /* Read the characters out of the buffer */
 529         while (count--) {
 530                 if (fp && *fp++) {
 531                         if (!test_and_set_bit(SLF_ERROR, &sl->flags))
 532                                 sl->dev->stats.rx_errors++;
 533                         cp++;
 534                         continue;
 535                 }
 536                 x25_asy_unesc(sl, *cp++);
 537         }
 538 }
 539
 540 /*
 541  * Open the high-level part of the X.25 channel.
 542  * This function is called by the TTY module when the
 543  * X.25 line discipline is called for.  Because we are
 544  * sure the tty line exists, we only have to link it to
 545  * a free X.25 channel...
 546  */
 547
 548 static int x25_asy_open_tty(struct tty_struct *tty)
 549 {
 550         struct x25_asy *sl;
 551         int err;
 552
 553         if (tty->ops->write == NULL)
 554                 return -EOPNOTSUPP;
 555
 556         /* OK.  Find a free X.25 channel to use. */
 557         sl = x25_asy_alloc();
 558         if (sl == NULL)
 559                 return -ENFILE;
 560
 561         sl->tty = tty;
 562         tty->disc_data = sl;
 563         tty->receive_room = 65536;
 564         tty_driver_flush_buffer(tty);
 565         tty_ldisc_flush(tty);
 566
 567         /* Restore default settings */
 568         sl->dev->type = ARPHRD_X25;
 569
 570         /* Perform the low-level X.25 async init */
 571         err = x25_asy_open(sl->dev);
 572         if (err) {
 573                 x25_asy_free(sl);
 574                 return err;
 575         }
 576         /* Done.  We have linked the TTY line to a channel. */
 577         return 0;
 578 }
 579
 580
 581 /*
 582  * Close down an X.25 channel.
 583  * This means flushing out any pending queues, and then restoring the
 584  * TTY line discipline to what it was before it got hooked to X.25
 585  * (which usually is TTY again).
 586  */
 587 static void x25_asy_close_tty(struct tty_struct *tty)
 588 {
 589         struct x25_asy *sl = tty->disc_data;
 590         int err;
 591
 592         /* First make sure we're connected. */
 593         if (!sl || sl->magic != X25_ASY_MAGIC)
 594                 return;
 595
 596         rtnl_lock();
 597         if (sl->dev->flags & IFF_UP)
 598                 dev_close(sl->dev);
 599         rtnl_unlock();
 600
 601         err = lapb_unregister(sl->dev);
 602         if (err != LAPB_OK)
 603                 pr_err("x25_asy_close: lapb_unregister error: %d\n",
 604                        err);
 605
 606         tty->disc_data = NULL;
 607         sl->tty = NULL;
 608         x25_asy_free(sl);
 609 }
 610
 611  /************************************************************************
 612   *                     STANDARD X.25 ENCAPSULATION                      *
 613   ************************************************************************/
 614
 615 static int x25_asy_esc(unsigned char *s, unsigned char *d, int len)
 616 {
 617         unsigned char *ptr = d;
 618         unsigned char c;
 619
 620         /*
 621          * Send an initial END character to flush out any
 622          * data that may have accumulated in the receiver
 623          * due to line noise.
 624          */
 625
 626         *ptr++ = X25_END;       /* Send 10111110 bit seq */
 627
 628         /*
 629          * For each byte in the packet, send the appropriate
 630          * character sequence, according to the X.25 protocol.
 631          */
 632
 633         while (len-- > 0) {
 634                 switch (c = *s++) {
 635                 case X25_END:
 636                         *ptr++ = X25_ESC;
 637                         *ptr++ = X25_ESCAPE(X25_END);
 638                         break;
 639                 case X25_ESC:
 640                         *ptr++ = X25_ESC;
 641                         *ptr++ = X25_ESCAPE(X25_ESC);
 642                         break;
 643                 default:
 644                         *ptr++ = c;
 645                         break;
 646                 }
 647         }
 648         *ptr++ = X25_END;
 649         return ptr - d;
 650 }
 651
 652 static void x25_asy_unesc(struct x25_asy *sl, unsigned char s)
 653 {
 654
 655         switch (s) {
 656         case X25_END:
 657                 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
 658                     sl->rcount > 2)
 659                         x25_asy_bump(sl);
 660                 clear_bit(SLF_ESCAPE, &sl->flags);
 661                 sl->rcount = 0;
 662                 return;
 663         case X25_ESC:
 664                 set_bit(SLF_ESCAPE, &sl->flags);
 665                 return;
 666         case X25_ESCAPE(X25_ESC):
 667         case X25_ESCAPE(X25_END):
 668                 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
 669                         s = X25_UNESCAPE(s);
 670                 break;
 671         }
 672         if (!test_bit(SLF_ERROR, &sl->flags)) {
 673                 if (sl->rcount < sl->buffsize) {
 674                         sl->rbuff[sl->rcount++] = s;
 675                         return;
 676                 }
 677                 sl->dev->stats.rx_over_errors++;
 678                 set_bit(SLF_ERROR, &sl->flags);
 679         }
 680 }
 681
 682
 683 /* Perform I/O control on an active X.25 channel. */
 684 static int x25_asy_ioctl(struct tty_struct *tty, struct file *file,
 685                          unsigned int cmd,  unsigned long arg)
 686 {
 687         struct x25_asy *sl = tty->disc_data;
 688
 689         /* First make sure we're connected. */
 690         if (!sl || sl->magic != X25_ASY_MAGIC)
 691                 return -EINVAL;
 692
 693         switch (cmd) {
 694         case SIOCGIFNAME:
 695                 if (copy_to_user((void __user *)arg, sl->dev->name,
 696                                         strlen(sl->dev->name) + 1))
 697                         return -EFAULT;
 698                 return 0;
 699         case SIOCSIFHWADDR:
 700                 return -EINVAL;
 701         default:
 702                 return tty_mode_ioctl(tty, file, cmd, arg);
 703         }
 704 }
 705
 706 #ifdef CONFIG_COMPAT
 707 static long x25_asy_compat_ioctl(struct tty_struct *tty, struct file *file,
 708                          unsigned int cmd,  unsigned long arg)
 709 {
 710         switch (cmd) {
 711         case SIOCGIFNAME:
 712         case SIOCSIFHWADDR:
 713                 return x25_asy_ioctl(tty, file, cmd,
 714                                      (unsigned long)compat_ptr(arg));
 715         }
 716
 717         return -ENOIOCTLCMD;
 718 }
 719 #endif
 720
 721 static int x25_asy_open_dev(struct net_device *dev)
 722 {
 723         struct x25_asy *sl = netdev_priv(dev);
 724         if (sl->tty == NULL)
 725                 return -ENODEV;
 726         return 0;
 727 }
 728
 729 static const struct net_device_ops x25_asy_netdev_ops = {
 730         .ndo_open       = x25_asy_open_dev,
 731         .ndo_stop       = x25_asy_close,
 732         .ndo_start_xmit = x25_asy_xmit,
 733         .ndo_tx_timeout = x25_asy_timeout,
 734         .ndo_change_mtu = x25_asy_change_mtu,
 735 };
 736
 737 /* Initialise the X.25 driver.  Called by the device init code */
 738 static void x25_asy_setup(struct net_device *dev)
 739 {
 740         struct x25_asy *sl = netdev_priv(dev);
 741
 742         sl->magic  = X25_ASY_MAGIC;
 743         sl->dev    = dev;
 744         spin_lock_init(&sl->lock);
 745         set_bit(SLF_INUSE, &sl->flags);
 746
 747         /*
 748          *      Finish setting up the DEVICE info.
 749          */
 750
 751         dev->mtu                = SL_MTU;
 752         dev->min_mtu            = 0;
 753         dev->max_mtu            = 65534;
 754         dev->netdev_ops         = &x25_asy_netdev_ops;
 755         dev->watchdog_timeo     = HZ*20;
 756         dev->hard_header_len    = 0;
 757         dev->addr_len           = 0;
 758         dev->type               = ARPHRD_X25;
 759         dev->tx_queue_len       = 10;
 760
 761         /* New-style flags. */
 762         dev->flags              = IFF_NOARP;
 763 }
 764
 765 static struct tty_ldisc_ops x25_ldisc = {
 766         .owner          = THIS_MODULE,
 767         .magic          = TTY_LDISC_MAGIC,
 768         .name           = "X.25",
 769         .open           = x25_asy_open_tty,
 770         .close          = x25_asy_close_tty,
 771         .ioctl          = x25_asy_ioctl,
 772 #ifdef CONFIG_COMPAT
 773         .compat_ioctl   = x25_asy_compat_ioctl,
 774 #endif
 775         .receive_buf    = x25_asy_receive_buf,
 776         .write_wakeup   = x25_asy_write_wakeup,
 777 };
 778
 779 static int __init init_x25_asy(void)
 780 {
 781         if (x25_asy_maxdev < 4)
 782                 x25_asy_maxdev = 4; /* Sanity */
 783
 784         pr_info("X.25 async: version 0.00 ALPHA (dynamic channels, max=%d)\n",
 785                 x25_asy_maxdev);
 786
 787         x25_asy_devs = kcalloc(x25_asy_maxdev, sizeof(struct net_device *),
 788                                 GFP_KERNEL);
 789         if (!x25_asy_devs)
 790                 return -ENOMEM;
 791
 792         return tty_register_ldisc(N_X25, &x25_ldisc);
 793 }
 794
 795
 796 static void __exit exit_x25_asy(void)
 797 {
 798         struct net_device *dev;
 799         int i;
 800
 801         for (i = 0; i < x25_asy_maxdev; i++) {
 802                 dev = x25_asy_devs[i];
 803                 if (dev) {
 804                         struct x25_asy *sl = netdev_priv(dev);
 805
 806                         spin_lock_bh(&sl->lock);
 807                         if (sl->tty)
 808                                 tty_hangup(sl->tty);
 809
 810                         spin_unlock_bh(&sl->lock);
 811                         /*
 812                          * VSV = if dev->start==0, then device
 813                          * unregistered while close proc.
 814                          */
 815                         unregister_netdev(dev);
 816                         free_netdev(dev);
 817                 }
 818         }
 819
 820         kfree(x25_asy_devs);
 821         tty_unregister_ldisc(N_X25);
 822 }
 823
 824 module_init(init_x25_asy);
 825 module_exit(exit_x25_asy);