2 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
3 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
5 * Permission to use, copy, modify, and distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 /********************************************\
20 Queue Control Unit, DCF Control Unit Functions
21 \********************************************/
23 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
28 #include <linux/log2.h>
31 * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions
33 * Here we setup parameters for the 12 available TX queues. Note that
34 * on the various registers we can usually only map the first 10 of them so
35 * basically we have 10 queues to play with. Each queue has a matching
36 * QCU that controls when the queue will get triggered and multiple QCUs
37 * can be mapped to a single DCU that controls the various DFS parameters
38 * for the various queues. In our setup we have a 1:1 mapping between QCUs
39 * and DCUs allowing us to have different DFS settings for each queue.
41 * When a frame goes into a TX queue, QCU decides when it'll trigger a
42 * transmission based on various criteria (such as how many data we have inside
43 * it's buffer or -if it's a beacon queue- if it's time to fire up the queue
44 * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler
45 * (arbitrator) decides the priority of each QCU based on it's configuration
46 * (e.g. beacons are always transmitted when they leave DCU bypassing all other
47 * frames from other queues waiting to be transmitted). After a frame leaves
48 * the DCU it goes to PCU for further processing and then to PHY for
49 * the actual transmission.
58 * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue
59 * @ah: The &struct ath5k_hw
60 * @queue: One of enum ath5k_tx_queue_id
63 ath5k_hw_num_tx_pending(struct ath5k_hw
*ah
, unsigned int queue
)
66 AR5K_ASSERT_ENTRY(queue
, ah
->ah_capabilities
.cap_queues
.q_tx_num
);
68 /* Return if queue is declared inactive */
69 if (ah
->ah_txq
[queue
].tqi_type
== AR5K_TX_QUEUE_INACTIVE
)
72 /* XXX: How about AR5K_CFG_TXCNT ? */
73 if (ah
->ah_version
== AR5K_AR5210
)
76 pending
= ath5k_hw_reg_read(ah
, AR5K_QUEUE_STATUS(queue
));
77 pending
&= AR5K_QCU_STS_FRMPENDCNT
;
79 /* It's possible to have no frames pending even if TXE
80 * is set. To indicate that q has not stopped return
82 if (!pending
&& AR5K_REG_READ_Q(ah
, AR5K_QCU_TXE
, queue
))
89 * ath5k_hw_release_tx_queue() - Set a transmit queue inactive
90 * @ah: The &struct ath5k_hw
91 * @queue: One of enum ath5k_tx_queue_id
94 ath5k_hw_release_tx_queue(struct ath5k_hw
*ah
, unsigned int queue
)
96 if (WARN_ON(queue
>= ah
->ah_capabilities
.cap_queues
.q_tx_num
))
99 /* This queue will be skipped in further operations */
100 ah
->ah_txq
[queue
].tqi_type
= AR5K_TX_QUEUE_INACTIVE
;
102 AR5K_Q_DISABLE_BITS(ah
->ah_txq_status
, queue
);
106 * ath5k_cw_validate() - Make sure the given cw is valid
107 * @cw_req: The contention window value to check
109 * Make sure cw is a power of 2 minus 1 and smaller than 1024
112 ath5k_cw_validate(u16 cw_req
)
114 cw_req
= min(cw_req
, (u16
)1023);
116 /* Check if cw_req + 1 a power of 2 */
117 if (is_power_of_2(cw_req
+ 1))
120 /* Check if cw_req is a power of 2 */
121 if (is_power_of_2(cw_req
))
124 /* If none of the above is correct
125 * find the closest power of 2 */
126 cw_req
= (u16
) roundup_pow_of_two(cw_req
) - 1;
132 * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue
133 * @ah: The &struct ath5k_hw
134 * @queue: One of enum ath5k_tx_queue_id
135 * @queue_info: The &struct ath5k_txq_info to fill
138 ath5k_hw_get_tx_queueprops(struct ath5k_hw
*ah
, int queue
,
139 struct ath5k_txq_info
*queue_info
)
141 memcpy(queue_info
, &ah
->ah_txq
[queue
], sizeof(struct ath5k_txq_info
));
146 * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue
147 * @ah: The &struct ath5k_hw
148 * @queue: One of enum ath5k_tx_queue_id
149 * @qinfo: The &struct ath5k_txq_info to use
151 * Returns 0 on success or -EIO if queue is inactive
154 ath5k_hw_set_tx_queueprops(struct ath5k_hw
*ah
, int queue
,
155 const struct ath5k_txq_info
*qinfo
)
157 struct ath5k_txq_info
*qi
;
159 AR5K_ASSERT_ENTRY(queue
, ah
->ah_capabilities
.cap_queues
.q_tx_num
);
161 qi
= &ah
->ah_txq
[queue
];
163 if (qi
->tqi_type
== AR5K_TX_QUEUE_INACTIVE
)
166 /* copy and validate values */
167 qi
->tqi_type
= qinfo
->tqi_type
;
168 qi
->tqi_subtype
= qinfo
->tqi_subtype
;
169 qi
->tqi_flags
= qinfo
->tqi_flags
;
171 * According to the docs: Although the AIFS field is 8 bit wide,
172 * the maximum supported value is 0xFC. Setting it higher than that
173 * will cause the DCU to hang.
175 qi
->tqi_aifs
= min(qinfo
->tqi_aifs
, (u8
)0xFC);
176 qi
->tqi_cw_min
= ath5k_cw_validate(qinfo
->tqi_cw_min
);
177 qi
->tqi_cw_max
= ath5k_cw_validate(qinfo
->tqi_cw_max
);
178 qi
->tqi_cbr_period
= qinfo
->tqi_cbr_period
;
179 qi
->tqi_cbr_overflow_limit
= qinfo
->tqi_cbr_overflow_limit
;
180 qi
->tqi_burst_time
= qinfo
->tqi_burst_time
;
181 qi
->tqi_ready_time
= qinfo
->tqi_ready_time
;
183 /*XXX: Is this supported on 5210 ?*/
184 /*XXX: Is this correct for AR5K_WME_AC_VI,VO ???*/
185 if ((qinfo
->tqi_type
== AR5K_TX_QUEUE_DATA
&&
186 ((qinfo
->tqi_subtype
== AR5K_WME_AC_VI
) ||
187 (qinfo
->tqi_subtype
== AR5K_WME_AC_VO
))) ||
188 qinfo
->tqi_type
== AR5K_TX_QUEUE_UAPSD
)
189 qi
->tqi_flags
|= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS
;
195 * ath5k_hw_setup_tx_queue() - Initialize a transmit queue
196 * @ah: The &struct ath5k_hw
197 * @queue_type: One of enum ath5k_tx_queue
198 * @queue_info: The &struct ath5k_txq_info to use
200 * Returns 0 on success, -EINVAL on invalid arguments
203 ath5k_hw_setup_tx_queue(struct ath5k_hw
*ah
, enum ath5k_tx_queue queue_type
,
204 struct ath5k_txq_info
*queue_info
)
212 /* 5210 only has 2 queues */
213 if (ah
->ah_capabilities
.cap_queues
.q_tx_num
== 2) {
214 switch (queue_type
) {
215 case AR5K_TX_QUEUE_DATA
:
216 queue
= AR5K_TX_QUEUE_ID_NOQCU_DATA
;
218 case AR5K_TX_QUEUE_BEACON
:
219 case AR5K_TX_QUEUE_CAB
:
220 queue
= AR5K_TX_QUEUE_ID_NOQCU_BEACON
;
226 switch (queue_type
) {
227 case AR5K_TX_QUEUE_DATA
:
228 queue
= queue_info
->tqi_subtype
;
230 case AR5K_TX_QUEUE_UAPSD
:
231 queue
= AR5K_TX_QUEUE_ID_UAPSD
;
233 case AR5K_TX_QUEUE_BEACON
:
234 queue
= AR5K_TX_QUEUE_ID_BEACON
;
236 case AR5K_TX_QUEUE_CAB
:
237 queue
= AR5K_TX_QUEUE_ID_CAB
;
245 * Setup internal queue structure
247 memset(&ah
->ah_txq
[queue
], 0, sizeof(struct ath5k_txq_info
));
248 ah
->ah_txq
[queue
].tqi_type
= queue_type
;
250 if (queue_info
!= NULL
) {
251 queue_info
->tqi_type
= queue_type
;
252 ret
= ath5k_hw_set_tx_queueprops(ah
, queue
, queue_info
);
258 * We use ah_txq_status to hold a temp value for
259 * the Secondary interrupt mask registers on 5211+
260 * check out ath5k_hw_reset_tx_queue
262 AR5K_Q_ENABLE_BITS(ah
->ah_txq_status
, queue
);
268 /*******************************\
269 * Single QCU/DCU initialization *
270 \*******************************/
273 * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU
274 * @ah: The &struct ath5k_hw
275 * @queue: One of enum ath5k_tx_queue_id
277 * This function is used when initializing a queue, to set
278 * retry limits based on ah->ah_retry_* and the chipset used.
281 ath5k_hw_set_tx_retry_limits(struct ath5k_hw
*ah
,
284 /* Single data queue on AR5210 */
285 if (ah
->ah_version
== AR5K_AR5210
) {
286 struct ath5k_txq_info
*tq
= &ah
->ah_txq
[queue
];
291 ath5k_hw_reg_write(ah
,
292 (tq
->tqi_cw_min
<< AR5K_NODCU_RETRY_LMT_CW_MIN_S
)
293 | AR5K_REG_SM(ah
->ah_retry_long
,
294 AR5K_NODCU_RETRY_LMT_SLG_RETRY
)
295 | AR5K_REG_SM(ah
->ah_retry_short
,
296 AR5K_NODCU_RETRY_LMT_SSH_RETRY
)
297 | AR5K_REG_SM(ah
->ah_retry_long
,
298 AR5K_NODCU_RETRY_LMT_LG_RETRY
)
299 | AR5K_REG_SM(ah
->ah_retry_short
,
300 AR5K_NODCU_RETRY_LMT_SH_RETRY
),
301 AR5K_NODCU_RETRY_LMT
);
304 ath5k_hw_reg_write(ah
,
305 AR5K_REG_SM(ah
->ah_retry_long
,
306 AR5K_DCU_RETRY_LMT_RTS
)
307 | AR5K_REG_SM(ah
->ah_retry_long
,
308 AR5K_DCU_RETRY_LMT_STA_RTS
)
309 | AR5K_REG_SM(max(ah
->ah_retry_long
, ah
->ah_retry_short
),
310 AR5K_DCU_RETRY_LMT_STA_DATA
),
311 AR5K_QUEUE_DFS_RETRY_LIMIT(queue
));
316 * ath5k_hw_reset_tx_queue() - Initialize a single hw queue
317 * @ah: The &struct ath5k_hw
318 * @queue: One of enum ath5k_tx_queue_id
320 * Set DCF properties for the given transmit queue on DCU
321 * and configures all queue-specific parameters.
324 ath5k_hw_reset_tx_queue(struct ath5k_hw
*ah
, unsigned int queue
)
326 struct ath5k_txq_info
*tq
= &ah
->ah_txq
[queue
];
328 AR5K_ASSERT_ENTRY(queue
, ah
->ah_capabilities
.cap_queues
.q_tx_num
);
330 tq
= &ah
->ah_txq
[queue
];
332 /* Skip if queue inactive or if we are on AR5210
333 * that doesn't have QCU/DCU */
334 if ((ah
->ah_version
== AR5K_AR5210
) ||
335 (tq
->tqi_type
== AR5K_TX_QUEUE_INACTIVE
))
339 * Set contention window (cw_min/cw_max)
340 * and arbitrated interframe space (aifs)...
342 ath5k_hw_reg_write(ah
,
343 AR5K_REG_SM(tq
->tqi_cw_min
, AR5K_DCU_LCL_IFS_CW_MIN
) |
344 AR5K_REG_SM(tq
->tqi_cw_max
, AR5K_DCU_LCL_IFS_CW_MAX
) |
345 AR5K_REG_SM(tq
->tqi_aifs
, AR5K_DCU_LCL_IFS_AIFS
),
346 AR5K_QUEUE_DFS_LOCAL_IFS(queue
));
349 * Set tx retry limits for this queue
351 ath5k_hw_set_tx_retry_limits(ah
, queue
);
358 /* Enable DCU to wait for next fragment from QCU */
359 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_DFS_MISC(queue
),
360 AR5K_DCU_MISC_FRAG_WAIT
);
362 /* On Maui and Spirit use the global seqnum on DCU */
363 if (ah
->ah_mac_version
< AR5K_SREV_AR5211
)
364 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_DFS_MISC(queue
),
365 AR5K_DCU_MISC_SEQNUM_CTL
);
367 /* Constant bit rate period */
368 if (tq
->tqi_cbr_period
) {
369 ath5k_hw_reg_write(ah
, AR5K_REG_SM(tq
->tqi_cbr_period
,
370 AR5K_QCU_CBRCFG_INTVAL
) |
371 AR5K_REG_SM(tq
->tqi_cbr_overflow_limit
,
372 AR5K_QCU_CBRCFG_ORN_THRES
),
373 AR5K_QUEUE_CBRCFG(queue
));
375 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
376 AR5K_QCU_MISC_FRSHED_CBR
);
378 if (tq
->tqi_cbr_overflow_limit
)
379 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
380 AR5K_QCU_MISC_CBR_THRES_ENABLE
);
383 /* Ready time interval */
384 if (tq
->tqi_ready_time
&& (tq
->tqi_type
!= AR5K_TX_QUEUE_CAB
))
385 ath5k_hw_reg_write(ah
, AR5K_REG_SM(tq
->tqi_ready_time
,
386 AR5K_QCU_RDYTIMECFG_INTVAL
) |
387 AR5K_QCU_RDYTIMECFG_ENABLE
,
388 AR5K_QUEUE_RDYTIMECFG(queue
));
390 if (tq
->tqi_burst_time
) {
391 ath5k_hw_reg_write(ah
, AR5K_REG_SM(tq
->tqi_burst_time
,
392 AR5K_DCU_CHAN_TIME_DUR
) |
393 AR5K_DCU_CHAN_TIME_ENABLE
,
394 AR5K_QUEUE_DFS_CHANNEL_TIME(queue
));
396 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE
)
397 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
398 AR5K_QCU_MISC_RDY_VEOL_POLICY
);
401 /* Enable/disable Post frame backoff */
402 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_BACKOFF_DISABLE
)
403 ath5k_hw_reg_write(ah
, AR5K_DCU_MISC_POST_FR_BKOFF_DIS
,
404 AR5K_QUEUE_DFS_MISC(queue
));
406 /* Enable/disable fragmentation burst backoff */
407 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE
)
408 ath5k_hw_reg_write(ah
, AR5K_DCU_MISC_BACKOFF_FRAG
,
409 AR5K_QUEUE_DFS_MISC(queue
));
412 * Set registers by queue type
414 switch (tq
->tqi_type
) {
415 case AR5K_TX_QUEUE_BEACON
:
416 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
417 AR5K_QCU_MISC_FRSHED_DBA_GT
|
418 AR5K_QCU_MISC_CBREXP_BCN_DIS
|
419 AR5K_QCU_MISC_BCN_ENABLE
);
421 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_DFS_MISC(queue
),
422 (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL
<<
423 AR5K_DCU_MISC_ARBLOCK_CTL_S
) |
424 AR5K_DCU_MISC_ARBLOCK_IGNORE
|
425 AR5K_DCU_MISC_POST_FR_BKOFF_DIS
|
426 AR5K_DCU_MISC_BCN_ENABLE
);
429 case AR5K_TX_QUEUE_CAB
:
430 /* XXX: use BCN_SENT_GT, if we can figure out how */
431 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
432 AR5K_QCU_MISC_FRSHED_DBA_GT
|
433 AR5K_QCU_MISC_CBREXP_DIS
|
434 AR5K_QCU_MISC_CBREXP_BCN_DIS
);
436 ath5k_hw_reg_write(ah
, ((tq
->tqi_ready_time
-
437 (AR5K_TUNE_SW_BEACON_RESP
-
438 AR5K_TUNE_DMA_BEACON_RESP
) -
439 AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF
) * 1024) |
440 AR5K_QCU_RDYTIMECFG_ENABLE
,
441 AR5K_QUEUE_RDYTIMECFG(queue
));
443 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_DFS_MISC(queue
),
444 (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL
<<
445 AR5K_DCU_MISC_ARBLOCK_CTL_S
));
448 case AR5K_TX_QUEUE_UAPSD
:
449 AR5K_REG_ENABLE_BITS(ah
, AR5K_QUEUE_MISC(queue
),
450 AR5K_QCU_MISC_CBREXP_DIS
);
453 case AR5K_TX_QUEUE_DATA
:
458 /* TODO: Handle frame compression */
461 * Enable interrupts for this tx queue
462 * in the secondary interrupt mask registers
464 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXOKINT_ENABLE
)
465 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_txok
, queue
);
467 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXERRINT_ENABLE
)
468 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_txerr
, queue
);
470 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXURNINT_ENABLE
)
471 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_txurn
, queue
);
473 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXDESCINT_ENABLE
)
474 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_txdesc
, queue
);
476 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXEOLINT_ENABLE
)
477 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_txeol
, queue
);
479 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_CBRORNINT_ENABLE
)
480 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_cbrorn
, queue
);
482 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_CBRURNINT_ENABLE
)
483 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_cbrurn
, queue
);
485 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_QTRIGINT_ENABLE
)
486 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_qtrig
, queue
);
488 if (tq
->tqi_flags
& AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE
)
489 AR5K_Q_ENABLE_BITS(ah
->ah_txq_imr_nofrm
, queue
);
491 /* Update secondary interrupt mask registers */
493 /* Filter out inactive queues */
494 ah
->ah_txq_imr_txok
&= ah
->ah_txq_status
;
495 ah
->ah_txq_imr_txerr
&= ah
->ah_txq_status
;
496 ah
->ah_txq_imr_txurn
&= ah
->ah_txq_status
;
497 ah
->ah_txq_imr_txdesc
&= ah
->ah_txq_status
;
498 ah
->ah_txq_imr_txeol
&= ah
->ah_txq_status
;
499 ah
->ah_txq_imr_cbrorn
&= ah
->ah_txq_status
;
500 ah
->ah_txq_imr_cbrurn
&= ah
->ah_txq_status
;
501 ah
->ah_txq_imr_qtrig
&= ah
->ah_txq_status
;
502 ah
->ah_txq_imr_nofrm
&= ah
->ah_txq_status
;
504 ath5k_hw_reg_write(ah
, AR5K_REG_SM(ah
->ah_txq_imr_txok
,
505 AR5K_SIMR0_QCU_TXOK
) |
506 AR5K_REG_SM(ah
->ah_txq_imr_txdesc
,
507 AR5K_SIMR0_QCU_TXDESC
),
510 ath5k_hw_reg_write(ah
, AR5K_REG_SM(ah
->ah_txq_imr_txerr
,
511 AR5K_SIMR1_QCU_TXERR
) |
512 AR5K_REG_SM(ah
->ah_txq_imr_txeol
,
513 AR5K_SIMR1_QCU_TXEOL
),
516 /* Update SIMR2 but don't overwrite rest simr2 settings */
517 AR5K_REG_DISABLE_BITS(ah
, AR5K_SIMR2
, AR5K_SIMR2_QCU_TXURN
);
518 AR5K_REG_ENABLE_BITS(ah
, AR5K_SIMR2
,
519 AR5K_REG_SM(ah
->ah_txq_imr_txurn
,
520 AR5K_SIMR2_QCU_TXURN
));
522 ath5k_hw_reg_write(ah
, AR5K_REG_SM(ah
->ah_txq_imr_cbrorn
,
523 AR5K_SIMR3_QCBRORN
) |
524 AR5K_REG_SM(ah
->ah_txq_imr_cbrurn
,
528 ath5k_hw_reg_write(ah
, AR5K_REG_SM(ah
->ah_txq_imr_qtrig
,
529 AR5K_SIMR4_QTRIG
), AR5K_SIMR4
);
531 /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */
532 ath5k_hw_reg_write(ah
, AR5K_REG_SM(ah
->ah_txq_imr_nofrm
,
533 AR5K_TXNOFRM_QCU
), AR5K_TXNOFRM
);
535 /* No queue has TXNOFRM enabled, disable the interrupt
536 * by setting AR5K_TXNOFRM to zero */
537 if (ah
->ah_txq_imr_nofrm
== 0)
538 ath5k_hw_reg_write(ah
, 0, AR5K_TXNOFRM
);
540 /* Set QCU mask for this DCU to save power */
541 AR5K_REG_WRITE_Q(ah
, AR5K_QUEUE_QCUMASK(queue
), queue
);
547 /**************************\
548 * Global QCU/DCU functions *
549 \**************************/
552 * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU
553 * @ah: The &struct ath5k_hw
554 * @slot_time: Slot time in us
556 * Sets the global IFS intervals on DCU (also works on AR5210) for
557 * the given slot time and the current bwmode.
559 int ath5k_hw_set_ifs_intervals(struct ath5k_hw
*ah
, unsigned int slot_time
)
561 struct ieee80211_channel
*channel
= ah
->ah_current_channel
;
562 enum nl80211_band band
;
563 struct ieee80211_supported_band
*sband
;
564 struct ieee80211_rate
*rate
;
565 u32 ack_tx_time
, eifs
, eifs_clock
, sifs
, sifs_clock
;
566 u32 slot_time_clock
= ath5k_hw_htoclock(ah
, slot_time
);
569 if (slot_time
< 6 || slot_time_clock
> AR5K_SLOT_TIME_MAX
)
572 sifs
= ath5k_hw_get_default_sifs(ah
);
573 sifs_clock
= ath5k_hw_htoclock(ah
, sifs
- 2);
576 * Txtime of ack at lowest rate + SIFS + DIFS
577 * (DIFS = SIFS + 2 * Slot time)
579 * Note: HAL has some predefined values for EIFS
580 * Turbo: (37 + 2 * 6)
581 * Default: (74 + 2 * 9)
582 * Half: (149 + 2 * 13)
583 * Quarter: (298 + 2 * 21)
585 * (74 + 2 * 6) for AR5210 default and turbo !
587 * According to the formula we have
588 * ack_tx_time = 25 for turbo and
589 * ack_tx_time = 42.5 * clock multiplier
590 * for default/half/quarter.
592 * This can't be right, 42 is what we would get
593 * from ath5k_hw_get_frame_dur_for_bwmode or
594 * ieee80211_generic_frame_duration for zero frame
595 * length and without SIFS !
597 * Also we have different lowest rate for 802.11a
599 if (channel
->band
== NL80211_BAND_5GHZ
)
600 band
= NL80211_BAND_5GHZ
;
602 band
= NL80211_BAND_2GHZ
;
604 switch (ah
->ah_bwmode
) {
605 case AR5K_BWMODE_5MHZ
:
606 rate_flags
= IEEE80211_RATE_SUPPORTS_5MHZ
;
608 case AR5K_BWMODE_10MHZ
:
609 rate_flags
= IEEE80211_RATE_SUPPORTS_10MHZ
;
615 sband
= &ah
->sbands
[band
];
617 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
618 if ((rate_flags
& sband
->bitrates
[i
].flags
) != rate_flags
)
620 rate
= &sband
->bitrates
[i
];
626 ack_tx_time
= ath5k_hw_get_frame_duration(ah
, band
, 10, rate
, false);
628 /* ack_tx_time includes an SIFS already */
629 eifs
= ack_tx_time
+ sifs
+ 2 * slot_time
;
630 eifs_clock
= ath5k_hw_htoclock(ah
, eifs
);
632 /* Set IFS settings on AR5210 */
633 if (ah
->ah_version
== AR5K_AR5210
) {
634 u32 pifs
, pifs_clock
, difs
, difs_clock
;
637 ath5k_hw_reg_write(ah
, slot_time_clock
, AR5K_SLOT_TIME
);
640 eifs_clock
= AR5K_REG_SM(eifs_clock
, AR5K_IFS1_EIFS
);
642 /* PIFS = Slot time + SIFS */
643 pifs
= slot_time
+ sifs
;
644 pifs_clock
= ath5k_hw_htoclock(ah
, pifs
);
645 pifs_clock
= AR5K_REG_SM(pifs_clock
, AR5K_IFS1_PIFS
);
647 /* DIFS = SIFS + 2 * Slot time */
648 difs
= sifs
+ 2 * slot_time
;
649 difs_clock
= ath5k_hw_htoclock(ah
, difs
);
652 ath5k_hw_reg_write(ah
, (difs_clock
<<
653 AR5K_IFS0_DIFS_S
) | sifs_clock
,
656 /* Set PIFS/EIFS and preserve AR5K_INIT_CARR_SENSE_EN */
657 ath5k_hw_reg_write(ah
, pifs_clock
| eifs_clock
|
658 (AR5K_INIT_CARR_SENSE_EN
<< AR5K_IFS1_CS_EN_S
),
664 /* Set IFS slot time */
665 ath5k_hw_reg_write(ah
, slot_time_clock
, AR5K_DCU_GBL_IFS_SLOT
);
667 /* Set EIFS interval */
668 ath5k_hw_reg_write(ah
, eifs_clock
, AR5K_DCU_GBL_IFS_EIFS
);
670 /* Set SIFS interval in usecs */
671 AR5K_REG_WRITE_BITS(ah
, AR5K_DCU_GBL_IFS_MISC
,
672 AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC
,
675 /* Set SIFS interval in clock cycles */
676 ath5k_hw_reg_write(ah
, sifs_clock
, AR5K_DCU_GBL_IFS_SIFS
);
683 * ath5k_hw_init_queues() - Initialize tx queues
684 * @ah: The &struct ath5k_hw
686 * Initializes all tx queues based on information on
687 * ah->ah_txq* set by the driver
690 ath5k_hw_init_queues(struct ath5k_hw
*ah
)
694 /* TODO: HW Compression support for data queues */
695 /* TODO: Burst prefetch for data queues */
698 * Reset queues and start beacon timers at the end of the reset routine
699 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
700 * Note: If we want we can assign multiple qcus on one dcu.
702 if (ah
->ah_version
!= AR5K_AR5210
)
703 for (i
= 0; i
< ah
->ah_capabilities
.cap_queues
.q_tx_num
; i
++) {
704 ret
= ath5k_hw_reset_tx_queue(ah
, i
);
707 "failed to reset TX queue #%d\n", i
);
712 /* No QCU/DCU on AR5210, just set tx
713 * retry limits. We set IFS parameters
714 * on ath5k_hw_set_ifs_intervals */
715 ath5k_hw_set_tx_retry_limits(ah
, 0);
717 /* Set the turbo flag when operating on 40MHz */
718 if (ah
->ah_bwmode
== AR5K_BWMODE_40MHZ
)
719 AR5K_REG_ENABLE_BITS(ah
, AR5K_DCU_GBL_IFS_MISC
,
720 AR5K_DCU_GBL_IFS_MISC_TURBO_MODE
);
722 /* If we didn't set IFS timings through
723 * ath5k_hw_set_coverage_class make sure
724 * we set them here */
725 if (!ah
->ah_coverage_class
) {
726 unsigned int slot_time
= ath5k_hw_get_default_slottime(ah
);
727 ath5k_hw_set_ifs_intervals(ah
, slot_time
);