Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / drivers / net / wireless / intel / iwlegacy / csr.h
blob9138e15004faa38ded8865c0b66fe276930c406e
1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
6 * GPL LICENSE SUMMARY
8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22 * USA
24 * The full GNU General Public License is included in this distribution
25 * in the file called LICENSE.GPL.
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
31 * BSD LICENSE
33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34 * All rights reserved.
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
38 * are met:
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
45 * distribution.
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62 *****************************************************************************/
63 #ifndef __il_csr_h__
64 #define __il_csr_h__
66 * CSR (control and status registers)
68 * CSR registers are mapped directly into PCI bus space, and are accessible
69 * whenever platform supplies power to device, even when device is in
70 * low power states due to driver-invoked device resets
71 * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
73 * Use _il_wr() and _il_rd() family to access these registers;
74 * these provide simple PCI bus access, without waking up the MAC.
75 * Do not use il_wr() family for these registers;
76 * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
77 * The MAC (uCode processor, etc.) does not need to be powered up for accessing
78 * the CSR registers.
80 * NOTE: Device does need to be awake in order to read this memory
81 * via CSR_EEPROM register
83 #define CSR_BASE (0x000)
85 #define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
86 #define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
87 #define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
88 #define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
89 #define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack */
90 #define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */
91 #define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc */
92 #define CSR_GP_CNTRL (CSR_BASE+0x024)
94 /* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */
95 #define CSR_INT_PERIODIC_REG (CSR_BASE+0x005)
98 * Hardware revision info
99 * Bit fields:
100 * 31-8: Reserved
101 * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions
102 * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
103 * 1-0: "Dash" (-) value, as in A-1, etc.
105 * NOTE: Revision step affects calculation of CCK txpower for 4965.
106 * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
108 #define CSR_HW_REV (CSR_BASE+0x028)
111 * EEPROM memory reads
113 * NOTE: Device must be awake, initialized via apm_ops.init(),
114 * in order to read.
116 #define CSR_EEPROM_REG (CSR_BASE+0x02c)
117 #define CSR_EEPROM_GP (CSR_BASE+0x030)
119 #define CSR_GIO_REG (CSR_BASE+0x03C)
120 #define CSR_GP_UCODE_REG (CSR_BASE+0x048)
121 #define CSR_GP_DRIVER_REG (CSR_BASE+0x050)
124 * UCODE-DRIVER GP (general purpose) mailbox registers.
125 * SET/CLR registers set/clear bit(s) if "1" is written.
127 #define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
128 #define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
129 #define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
130 #define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
132 #define CSR_LED_REG (CSR_BASE+0x094)
133 #define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0)
135 /* GIO Chicken Bits (PCI Express bus link power management) */
136 #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
138 /* Analog phase-lock-loop configuration */
139 #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
142 * CSR Hardware Revision Workaround Register. Indicates hardware rev;
143 * "step" determines CCK backoff for txpower calculation. Used for 4965 only.
144 * See also CSR_HW_REV register.
145 * Bit fields:
146 * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
147 * 1-0: "Dash" (-) value, as in C-1, etc.
149 #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C)
151 #define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240)
152 #define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
154 /* Bits for CSR_HW_IF_CONFIG_REG */
155 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010)
156 #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
157 #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
158 #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
160 #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100)
161 #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200)
162 #define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400)
163 #define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800)
164 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000)
165 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000)
167 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
168 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
169 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
170 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
171 #define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
173 #define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int */
174 #define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec */
176 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
177 * acknowledged (reset) by host writing "1" to flagged bits. */
178 #define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
179 #define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
180 #define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */
181 #define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
182 #define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
183 #define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
184 #define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
185 #define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
186 #define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */
187 #define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
188 #define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
190 #define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \
191 CSR_INT_BIT_HW_ERR | \
192 CSR_INT_BIT_FH_TX | \
193 CSR_INT_BIT_SW_ERR | \
194 CSR_INT_BIT_RF_KILL | \
195 CSR_INT_BIT_SW_RX | \
196 CSR_INT_BIT_WAKEUP | \
197 CSR_INT_BIT_ALIVE)
199 /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
200 #define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
201 #define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
202 #define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */
203 #define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
204 #define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
205 #define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */
206 #define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
207 #define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
209 #define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
210 CSR39_FH_INT_BIT_RX_CHNL2 | \
211 CSR_FH_INT_BIT_RX_CHNL1 | \
212 CSR_FH_INT_BIT_RX_CHNL0)
214 #define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \
215 CSR_FH_INT_BIT_TX_CHNL1 | \
216 CSR_FH_INT_BIT_TX_CHNL0)
218 #define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \
219 CSR_FH_INT_BIT_RX_CHNL1 | \
220 CSR_FH_INT_BIT_RX_CHNL0)
222 #define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \
223 CSR_FH_INT_BIT_TX_CHNL0)
225 /* GPIO */
226 #define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
227 #define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000)
228 #define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200)
230 /* RESET */
231 #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
232 #define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
233 #define CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
234 #define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
235 #define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
236 #define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
239 * GP (general purpose) CONTROL REGISTER
240 * Bit fields:
241 * 27: HW_RF_KILL_SW
242 * Indicates state of (platform's) hardware RF-Kill switch
243 * 26-24: POWER_SAVE_TYPE
244 * Indicates current power-saving mode:
245 * 000 -- No power saving
246 * 001 -- MAC power-down
247 * 010 -- PHY (radio) power-down
248 * 011 -- Error
249 * 9-6: SYS_CONFIG
250 * Indicates current system configuration, reflecting pins on chip
251 * as forced high/low by device circuit board.
252 * 4: GOING_TO_SLEEP
253 * Indicates MAC is entering a power-saving sleep power-down.
254 * Not a good time to access device-internal resources.
255 * 3: MAC_ACCESS_REQ
256 * Host sets this to request and maintain MAC wakeup, to allow host
257 * access to device-internal resources. Host must wait for
258 * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
259 * device registers.
260 * 2: INIT_DONE
261 * Host sets this to put device into fully operational D0 power mode.
262 * Host resets this after SW_RESET to put device into low power mode.
263 * 0: MAC_CLOCK_READY
264 * Indicates MAC (ucode processor, etc.) is powered up and can run.
265 * Internal resources are accessible.
266 * NOTE: This does not indicate that the processor is actually running.
267 * NOTE: This does not indicate that 4965 or 3945 has completed
268 * init or post-power-down restore of internal SRAM memory.
269 * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
270 * SRAM is restored and uCode is in normal operation mode.
271 * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
272 * do not need to save/restore it.
273 * NOTE: After device reset, this bit remains "0" until host sets
274 * INIT_DONE
276 #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
277 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
278 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
279 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
281 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
283 #define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
284 #define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000)
285 #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
287 /* EEPROM REG */
288 #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001)
289 #define CSR_EEPROM_REG_BIT_CMD (0x00000002)
290 #define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC)
291 #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
293 /* EEPROM GP */
294 #define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */
295 #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
296 #define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002)
297 #define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004)
299 /* GP REG */
300 #define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */
301 #define CSR_GP_REG_NO_POWER_SAVE (0x00000000)
302 #define CSR_GP_REG_MAC_POWER_SAVE (0x01000000)
303 #define CSR_GP_REG_PHY_POWER_SAVE (0x02000000)
304 #define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000)
306 /* CSR GIO */
307 #define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
310 * UCODE-DRIVER GP (general purpose) mailbox register 1
311 * Host driver and uCode write and/or read this register to communicate with
312 * each other.
313 * Bit fields:
314 * 4: UCODE_DISABLE
315 * Host sets this to request permanent halt of uCode, same as
316 * sending CARD_STATE command with "halt" bit set.
317 * 3: CT_KILL_EXIT
318 * Host sets this to request exit from CT_KILL state, i.e. host thinks
319 * device temperature is low enough to continue normal operation.
320 * 2: CMD_BLOCKED
321 * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
322 * to release uCode to clear all Tx and command queues, enter
323 * unassociated mode, and power down.
324 * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit.
325 * 1: SW_BIT_RFKILL
326 * Host sets this when issuing CARD_STATE command to request
327 * device sleep.
328 * 0: MAC_SLEEP
329 * uCode sets this when preparing a power-saving power-down.
330 * uCode resets this when power-up is complete and SRAM is sane.
331 * NOTE: 3945/4965 saves internal SRAM data to host when powering down,
332 * and must restore this data after powering back up.
333 * MAC_SLEEP is the best indication that restore is complete.
334 * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
335 * do not need to save/restore it.
337 #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
338 #define CSR_UCODE_SW_BIT_RFKILL (0x00000002)
339 #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
340 #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
342 /* GIO Chicken Bits (PCI Express bus link power management) */
343 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
344 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
346 /* LED */
347 #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
348 #define CSR_LED_REG_TRUN_ON (0x78)
349 #define CSR_LED_REG_TRUN_OFF (0x38)
351 /* ANA_PLL */
352 #define CSR39_ANA_PLL_CFG_VAL (0x01000000)
354 /* HPET MEM debug */
355 #define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
357 /* DRAM INT TBL */
358 #define CSR_DRAM_INT_TBL_ENABLE (1 << 31)
359 #define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
362 * HBUS (Host-side Bus)
364 * HBUS registers are mapped directly into PCI bus space, but are used
365 * to indirectly access device's internal memory or registers that
366 * may be powered-down.
368 * Use il_wr()/il_rd() family
369 * for these registers;
370 * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
371 * to make sure the MAC (uCode processor, etc.) is powered up for accessing
372 * internal resources.
374 * Do not use _il_wr()/_il_rd() family to access these registers;
375 * these provide only simple PCI bus access, without waking up the MAC.
377 #define HBUS_BASE (0x400)
380 * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
381 * structures, error log, event log, verifying uCode load).
382 * First write to address register, then read from or write to data register
383 * to complete the job. Once the address register is set up, accesses to
384 * data registers auto-increment the address by one dword.
385 * Bit usage for address registers (read or write):
386 * 0-31: memory address within device
388 #define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c)
389 #define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010)
390 #define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018)
391 #define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c)
393 /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
394 #define HBUS_TARG_MBX_C (HBUS_BASE+0x030)
395 #define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004)
398 * Registers for accessing device's internal peripheral registers
399 * (e.g. SCD, BSM, etc.). First write to address register,
400 * then read from or write to data register to complete the job.
401 * Bit usage for address registers (read or write):
402 * 0-15: register address (offset) within device
403 * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
405 #define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044)
406 #define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048)
407 #define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c)
408 #define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050)
411 * Per-Tx-queue write pointer (idx, really!)
412 * Indicates idx to next TFD that driver will fill (1 past latest filled).
413 * Bit usage:
414 * 0-7: queue write idx
415 * 11-8: queue selector
417 #define HBUS_TARG_WRPTR (HBUS_BASE+0x060)
419 #endif /* !__il_csr_h__ */