1 /******************************************************************************
3 * Copyright(c) 2009-2012 Realtek Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * The full GNU General Public License is included in this distribution in the
15 * file called LICENSE.
17 * Contact Information:
18 * wlanfae <wlanfae@realtek.com>
19 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
20 * Hsinchu 300, Taiwan.
22 *****************************************************************************/
27 #include <linux/skbuff.h>
29 #define RTL_RX_DESC_SIZE 24
31 #define RTL_USB_DEVICE(vend, prod, cfg) \
32 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
34 .idProduct = (prod), \
35 .driver_info = (kernel_ulong_t)&(cfg)
37 #define USB_HIGH_SPEED_BULK_SIZE 512
38 #define USB_FULL_SPEED_BULK_SIZE 64
41 #define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */
42 #define RTL_USB_MAX_EP_NUM 6 /* max ep number */
43 #define RTL_USB_MAX_TX_URBS_NUM 8
46 /* These definitions shall be consistent with value
47 * returned by skb_get_queue_mapping
48 *------------------------------------*/
53 /*------------------------------------*/
63 u32 ep_mapping
[__RTL_TXQ_NUM
];
67 struct rtl_usb
*rtlusb
;
71 static inline void _rtl_install_trx_info(struct rtl_usb
*rtlusb
,
75 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
76 info
->rate_driver_data
[0] = rtlusb
;
77 info
->rate_driver_data
[1] = (void *)(__kernel_size_t
)ep_num
;
81 /* Add suspend/resume later */
87 #define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state)
88 #define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state)
89 #define SET_USB_STOP(rtlusb_ptr) \
91 (rtlusb_ptr)->state = USB_STATE_STOP; \
94 #define SET_USB_START(rtlusb_ptr) \
96 (rtlusb_ptr)->state = USB_STATE_START; \
100 struct usb_device
*udev
;
101 struct usb_interface
*intf
;
102 enum rtl_usb_state state
;
104 /* Bcn control register setting */
105 u32 reg_bcn_ctrl_val
;
106 /* for 88/92cu card disable */
109 enum acm_method acm_method
;
110 /* irq . HIMR,HIMR_EX */
114 u16 (*usb_mq_to_hwq
)(__le16 fc
, u16 mac80211_queue_index
);
119 struct rtl_ep_map ep_map
;
121 u32 max_bulk_out_size
;
122 u32 tx_submitted_urbs
;
123 struct sk_buff_head tx_skb_queue
[RTL_USB_MAX_EP_NUM
];
125 struct usb_anchor tx_pending
[RTL_USB_MAX_EP_NUM
];
126 struct usb_anchor tx_submitted
;
128 struct sk_buff
*(*usb_tx_aggregate_hdl
)(struct ieee80211_hw
*,
129 struct sk_buff_head
*);
130 int (*usb_tx_post_hdl
)(struct ieee80211_hw
*,
131 struct urb
*, struct sk_buff
*);
132 void (*usb_tx_cleanup
)(struct ieee80211_hw
*, struct sk_buff
*);
136 u32 in_ep
; /* Bulk IN endpoint number */
137 u32 rx_max_size
; /* Bulk IN max buffer size */
138 u32 rx_urb_num
; /* How many Bulk INs are submitted to host. */
139 struct usb_anchor rx_submitted
;
140 struct usb_anchor rx_cleanup_urbs
;
141 struct tasklet_struct rx_work_tasklet
;
142 struct sk_buff_head rx_queue
;
143 void (*usb_rx_segregate_hdl
)(struct ieee80211_hw
*, struct sk_buff
*,
144 struct sk_buff_head
*);
145 void (*usb_rx_hdl
)(struct ieee80211_hw
*, struct sk_buff
*);
148 struct rtl_usb_priv
{
149 struct bt_coexist_info bt_coexist
;
153 #define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv))
154 #define rtl_usbdev(usbpriv) (&((usbpriv)->dev))
158 int rtl_usb_probe(struct usb_interface
*intf
,
159 const struct usb_device_id
*id
,
160 struct rtl_hal_cfg
*rtl92cu_hal_cfg
);
161 void rtl_usb_disconnect(struct usb_interface
*intf
);
162 int rtl_usb_suspend(struct usb_interface
*pusb_intf
, pm_message_t message
);
163 int rtl_usb_resume(struct usb_interface
*pusb_intf
);