?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / drivers / tty / serial / bcm63xx_uart.c
blobb7adc6127b3d97819f683c8a9f756d7dd57e69c8
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Derived from many drivers using generic_serial interface.
4 *
5 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
6 *
7 * Serial driver for BCM63xx integrated UART.
8 *
9 * Hardware flow control was _not_ tested since I only have RX/TX on
10 * my board.
11 */
12
13 #if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
14 #define SUPPORT_SYSRQ
15 #endif
16
17 #include <linux/kernel.h>
18 #include <linux/platform_device.h>
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <linux/module.h>
22 #include <linux/console.h>
23 #include <linux/clk.h>
24 #include <linux/tty.h>
25 #include <linux/tty_flip.h>
26 #include <linux/sysrq.h>
27 #include <linux/serial.h>
28 #include <linux/serial_core.h>
29 #include <linux/serial_bcm63xx.h>
30 #include <linux/io.h>
31 #include <linux/of.h>
32
33 #define BCM63XX_NR_UARTS 2
34
35 static struct uart_port ports[BCM63XX_NR_UARTS];
36
37 /*
38 * rx interrupt mask / stat
39 *
40 * mask:
41 * - rx fifo full
42 * - rx fifo above threshold
43 * - rx fifo not empty for too long
44 */
45 #define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
46 UART_IR_MASK(UART_IR_RXTHRESH) | \
47 UART_IR_MASK(UART_IR_RXTIMEOUT))
48
49 #define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
50 UART_IR_STAT(UART_IR_RXTHRESH) | \
51 UART_IR_STAT(UART_IR_RXTIMEOUT))
52
53 /*
54 * tx interrupt mask / stat
55 *
56 * mask:
57 * - tx fifo empty
58 * - tx fifo below threshold
59 */
60 #define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
61 UART_IR_MASK(UART_IR_TXTRESH))
62
63 #define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
64 UART_IR_STAT(UART_IR_TXTRESH))
65
66 /*
67 * external input interrupt
68 *
69 * mask: any edge on CTS, DCD
70 */
71 #define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
72 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
73
74 /*
75 * handy uart register accessor
76 */
77 static inline unsigned int bcm_uart_readl(struct uart_port *port,
78 unsigned int offset)
79 {
80 return __raw_readl(port->membase + offset);
81 }
82
83 static inline void bcm_uart_writel(struct uart_port *port,
84 unsigned int value, unsigned int offset)
85 {
86 __raw_writel(value, port->membase + offset);
87 }
88
89 /*
90 * serial core request to check if uart tx fifo is empty
91 */
92 static unsigned int bcm_uart_tx_empty(struct uart_port *port)
93 {
94 unsigned int val;
95
96 val = bcm_uart_readl(port, UART_IR_REG);
97 return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
98 }
99
100 /*
101 * serial core request to set RTS and DTR pin state and loopback mode
102 */
103 static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
104 {
105 unsigned int val;
106
107 val = bcm_uart_readl(port, UART_MCTL_REG);
108 val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
109 /* invert of written value is reflected on the pin */
110 if (!(mctrl & TIOCM_DTR))
111 val |= UART_MCTL_DTR_MASK;
112 if (!(mctrl & TIOCM_RTS))
113 val |= UART_MCTL_RTS_MASK;
114 bcm_uart_writel(port, val, UART_MCTL_REG);
115
116 val = bcm_uart_readl(port, UART_CTL_REG);
117 if (mctrl & TIOCM_LOOP)
118 val |= UART_CTL_LOOPBACK_MASK;
119 else
120 val &= ~UART_CTL_LOOPBACK_MASK;
121 bcm_uart_writel(port, val, UART_CTL_REG);
122 }
123
124 /*
125 * serial core request to return RI, CTS, DCD and DSR pin state
126 */
127 static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
128 {
129 unsigned int val, mctrl;
130
131 mctrl = 0;
132 val = bcm_uart_readl(port, UART_EXTINP_REG);
133 if (val & UART_EXTINP_RI_MASK)
134 mctrl |= TIOCM_RI;
135 if (val & UART_EXTINP_CTS_MASK)
136 mctrl |= TIOCM_CTS;
137 if (val & UART_EXTINP_DCD_MASK)
138 mctrl |= TIOCM_CD;
139 if (val & UART_EXTINP_DSR_MASK)
140 mctrl |= TIOCM_DSR;
141 return mctrl;
142 }
143
144 /*
145 * serial core request to disable tx ASAP (used for flow control)
146 */
147 static void bcm_uart_stop_tx(struct uart_port *port)
148 {
149 unsigned int val;
150
151 val = bcm_uart_readl(port, UART_CTL_REG);
152 val &= ~(UART_CTL_TXEN_MASK);
153 bcm_uart_writel(port, val, UART_CTL_REG);
154
155 val = bcm_uart_readl(port, UART_IR_REG);
156 val &= ~UART_TX_INT_MASK;
157 bcm_uart_writel(port, val, UART_IR_REG);
158 }
159
160 /*
161 * serial core request to (re)enable tx
162 */
163 static void bcm_uart_start_tx(struct uart_port *port)
164 {
165 unsigned int val;
166
167 val = bcm_uart_readl(port, UART_IR_REG);
168 val |= UART_TX_INT_MASK;
169 bcm_uart_writel(port, val, UART_IR_REG);
170
171 val = bcm_uart_readl(port, UART_CTL_REG);
172 val |= UART_CTL_TXEN_MASK;
173 bcm_uart_writel(port, val, UART_CTL_REG);
174 }
175
176 /*
177 * serial core request to stop rx, called before port shutdown
178 */
179 static void bcm_uart_stop_rx(struct uart_port *port)
180 {
181 unsigned int val;
182
183 val = bcm_uart_readl(port, UART_IR_REG);
184 val &= ~UART_RX_INT_MASK;
185 bcm_uart_writel(port, val, UART_IR_REG);
186 }
187
188 /*
189 * serial core request to enable modem status interrupt reporting
190 */
191 static void bcm_uart_enable_ms(struct uart_port *port)
192 {
193 unsigned int val;
194
195 val = bcm_uart_readl(port, UART_IR_REG);
196 val |= UART_IR_MASK(UART_IR_EXTIP);
197 bcm_uart_writel(port, val, UART_IR_REG);
198 }
199
200 /*
201 * serial core request to start/stop emitting break char
202 */
203 static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
204 {
205 unsigned long flags;
206 unsigned int val;
207
208 spin_lock_irqsave(&port->lock, flags);
209
210 val = bcm_uart_readl(port, UART_CTL_REG);
211 if (ctl)
212 val |= UART_CTL_XMITBRK_MASK;
213 else
214 val &= ~UART_CTL_XMITBRK_MASK;
215 bcm_uart_writel(port, val, UART_CTL_REG);
216
217 spin_unlock_irqrestore(&port->lock, flags);
218 }
219
220 /*
221 * return port type in string format
222 */
223 static const char *bcm_uart_type(struct uart_port *port)
224 {
225 return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
226 }
227
228 /*
229 * read all chars in rx fifo and send them to core
230 */
231 static void bcm_uart_do_rx(struct uart_port *port)
232 {
233 struct tty_port *tty_port = &port->state->port;
234 unsigned int max_count;
235
236 /* limit number of char read in interrupt, should not be
237 * higher than fifo size anyway since we're much faster than
238 * serial port */
239 max_count = 32;
240 do {
241 unsigned int iestat, c, cstat;
242 char flag;
243
244 /* get overrun/fifo empty information from ier
245 * register */
246 iestat = bcm_uart_readl(port, UART_IR_REG);
247
248 if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
249 unsigned int val;
250
251 /* fifo reset is required to clear
252 * interrupt */
253 val = bcm_uart_readl(port, UART_CTL_REG);
254 val |= UART_CTL_RSTRXFIFO_MASK;
255 bcm_uart_writel(port, val, UART_CTL_REG);
256
257 port->icount.overrun++;
258 tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
259 }
260
261 if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
262 break;
263
264 cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
265 port->icount.rx++;
266 flag = TTY_NORMAL;
267 c &= 0xff;
268
269 if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
270 /* do stats first */
271 if (cstat & UART_FIFO_BRKDET_MASK) {
272 port->icount.brk++;
273 if (uart_handle_break(port))
274 continue;
275 }
276
277 if (cstat & UART_FIFO_PARERR_MASK)
278 port->icount.parity++;
279 if (cstat & UART_FIFO_FRAMEERR_MASK)
280 port->icount.frame++;
281
282 /* update flag wrt read_status_mask */
283 cstat &= port->read_status_mask;
284 if (cstat & UART_FIFO_BRKDET_MASK)
285 flag = TTY_BREAK;
286 if (cstat & UART_FIFO_FRAMEERR_MASK)
287 flag = TTY_FRAME;
288 if (cstat & UART_FIFO_PARERR_MASK)
289 flag = TTY_PARITY;
290 }
291
292 if (uart_handle_sysrq_char(port, c))
293 continue;
294
295
296 if ((cstat & port->ignore_status_mask) == 0)
297 tty_insert_flip_char(tty_port, c, flag);
298
299 } while (--max_count);
300
301 spin_unlock(&port->lock);
302 tty_flip_buffer_push(tty_port);
303 spin_lock(&port->lock);
304 }
305
306 /*
307 * fill tx fifo with chars to send, stop when fifo is about to be full
308 * or when all chars have been sent.
309 */
310 static void bcm_uart_do_tx(struct uart_port *port)
311 {
312 struct circ_buf *xmit;
313 unsigned int val, max_count;
314
315 if (port->x_char) {
316 bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
317 port->icount.tx++;
318 port->x_char = 0;
319 return;
320 }
321
322 if (uart_tx_stopped(port)) {
323 bcm_uart_stop_tx(port);
324 return;
325 }
326
327 xmit = &port->state->xmit;
328 if (uart_circ_empty(xmit))
329 goto txq_empty;
330
331 val = bcm_uart_readl(port, UART_MCTL_REG);
332 val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
333 max_count = port->fifosize - val;
334
335 while (max_count--) {
336 unsigned int c;
337
338 c = xmit->buf[xmit->tail];
339 bcm_uart_writel(port, c, UART_FIFO_REG);
340 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
341 port->icount.tx++;
342 if (uart_circ_empty(xmit))
343 break;
344 }
345
346 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
347 uart_write_wakeup(port);
348
349 if (uart_circ_empty(xmit))
350 goto txq_empty;
351 return;
352
353 txq_empty:
354 /* nothing to send, disable transmit interrupt */
355 val = bcm_uart_readl(port, UART_IR_REG);
356 val &= ~UART_TX_INT_MASK;
357 bcm_uart_writel(port, val, UART_IR_REG);
358 return;
359 }
360
361 /*
362 * process uart interrupt
363 */
364 static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
365 {
366 struct uart_port *port;
367 unsigned int irqstat;
368
369 port = dev_id;
370 spin_lock(&port->lock);
371
372 irqstat = bcm_uart_readl(port, UART_IR_REG);
373 if (irqstat & UART_RX_INT_STAT)
374 bcm_uart_do_rx(port);
375
376 if (irqstat & UART_TX_INT_STAT)
377 bcm_uart_do_tx(port);
378
379 if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
380 unsigned int estat;
381
382 estat = bcm_uart_readl(port, UART_EXTINP_REG);
383 if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
384 uart_handle_cts_change(port,
385 estat & UART_EXTINP_CTS_MASK);
386 if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
387 uart_handle_dcd_change(port,
388 estat & UART_EXTINP_DCD_MASK);
389 }
390
391 spin_unlock(&port->lock);
392 return IRQ_HANDLED;
393 }
394
395 /*
396 * enable rx & tx operation on uart
397 */
398 static void bcm_uart_enable(struct uart_port *port)
399 {
400 unsigned int val;
401
402 val = bcm_uart_readl(port, UART_CTL_REG);
403 val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
404 bcm_uart_writel(port, val, UART_CTL_REG);
405 }
406
407 /*
408 * disable rx & tx operation on uart
409 */
410 static void bcm_uart_disable(struct uart_port *port)
411 {
412 unsigned int val;
413
414 val = bcm_uart_readl(port, UART_CTL_REG);
415 val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
416 UART_CTL_RXEN_MASK);
417 bcm_uart_writel(port, val, UART_CTL_REG);
418 }
419
420 /*
421 * clear all unread data in rx fifo and unsent data in tx fifo
422 */
423 static void bcm_uart_flush(struct uart_port *port)
424 {
425 unsigned int val;
426
427 /* empty rx and tx fifo */
428 val = bcm_uart_readl(port, UART_CTL_REG);
429 val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
430 bcm_uart_writel(port, val, UART_CTL_REG);
431
432 /* read any pending char to make sure all irq status are
433 * cleared */
434 (void)bcm_uart_readl(port, UART_FIFO_REG);
435 }
436
437 /*
438 * serial core request to initialize uart and start rx operation
439 */
440 static int bcm_uart_startup(struct uart_port *port)
441 {
442 unsigned int val;
443 int ret;
444
445 /* mask all irq and flush port */
446 bcm_uart_disable(port);
447 bcm_uart_writel(port, 0, UART_IR_REG);
448 bcm_uart_flush(port);
449
450 /* clear any pending external input interrupt */
451 (void)bcm_uart_readl(port, UART_EXTINP_REG);
452
453 /* set rx/tx fifo thresh to fifo half size */
454 val = bcm_uart_readl(port, UART_MCTL_REG);
455 val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
456 val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
457 val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
458 bcm_uart_writel(port, val, UART_MCTL_REG);
459
460 /* set rx fifo timeout to 1 char time */
461 val = bcm_uart_readl(port, UART_CTL_REG);
462 val &= ~UART_CTL_RXTMOUTCNT_MASK;
463 val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
464 bcm_uart_writel(port, val, UART_CTL_REG);
465
466 /* report any edge on dcd and cts */
467 val = UART_EXTINP_INT_MASK;
468 val |= UART_EXTINP_DCD_NOSENSE_MASK;
469 val |= UART_EXTINP_CTS_NOSENSE_MASK;
470 bcm_uart_writel(port, val, UART_EXTINP_REG);
471
472 /* register irq and enable rx interrupts */
473 ret = request_irq(port->irq, bcm_uart_interrupt, 0,
474 dev_name(port->dev), port);
475 if (ret)
476 return ret;
477 bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
478 bcm_uart_enable(port);
479 return 0;
480 }
481
482 /*
483 * serial core request to flush & disable uart
484 */
485 static void bcm_uart_shutdown(struct uart_port *port)
486 {
487 unsigned long flags;
488
489 spin_lock_irqsave(&port->lock, flags);
490 bcm_uart_writel(port, 0, UART_IR_REG);
491 spin_unlock_irqrestore(&port->lock, flags);
492
493 bcm_uart_disable(port);
494 bcm_uart_flush(port);
495 free_irq(port->irq, port);
496 }
497
498 /*
499 * serial core request to change current uart setting
500 */
501 static void bcm_uart_set_termios(struct uart_port *port,
502 struct ktermios *new,
503 struct ktermios *old)
504 {
505 unsigned int ctl, baud, quot, ier;
506 unsigned long flags;
507 int tries;
508
509 spin_lock_irqsave(&port->lock, flags);
510
511 /* Drain the hot tub fully before we power it off for the winter. */
512 for (tries = 3; !bcm_uart_tx_empty(port) && tries; tries--)
513 mdelay(10);
514
515 /* disable uart while changing speed */
516 bcm_uart_disable(port);
517 bcm_uart_flush(port);
518
519 /* update Control register */
520 ctl = bcm_uart_readl(port, UART_CTL_REG);
521 ctl &= ~UART_CTL_BITSPERSYM_MASK;
522
523 switch (new->c_cflag & CSIZE) {
524 case CS5:
525 ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
526 break;
527 case CS6:
528 ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
529 break;
530 case CS7:
531 ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
532 break;
533 default:
534 ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
535 break;
536 }
537
538 ctl &= ~UART_CTL_STOPBITS_MASK;
539 if (new->c_cflag & CSTOPB)
540 ctl |= UART_CTL_STOPBITS_2;
541 else
542 ctl |= UART_CTL_STOPBITS_1;
543
544 ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
545 if (new->c_cflag & PARENB)
546 ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
547 ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
548 if (new->c_cflag & PARODD)
549 ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
550 bcm_uart_writel(port, ctl, UART_CTL_REG);
551
552 /* update Baudword register */
553 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
554 quot = uart_get_divisor(port, baud) - 1;
555 bcm_uart_writel(port, quot, UART_BAUD_REG);
556
557 /* update Interrupt register */
558 ier = bcm_uart_readl(port, UART_IR_REG);
559
560 ier &= ~UART_IR_MASK(UART_IR_EXTIP);
561 if (UART_ENABLE_MS(port, new->c_cflag))
562 ier |= UART_IR_MASK(UART_IR_EXTIP);
563
564 bcm_uart_writel(port, ier, UART_IR_REG);
565
566 /* update read/ignore mask */
567 port->read_status_mask = UART_FIFO_VALID_MASK;
568 if (new->c_iflag & INPCK) {
569 port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
570 port->read_status_mask |= UART_FIFO_PARERR_MASK;
571 }
572 if (new->c_iflag & (IGNBRK | BRKINT))
573 port->read_status_mask |= UART_FIFO_BRKDET_MASK;
574
575 port->ignore_status_mask = 0;
576 if (new->c_iflag & IGNPAR)
577 port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
578 if (new->c_iflag & IGNBRK)
579 port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
580 if (!(new->c_cflag & CREAD))
581 port->ignore_status_mask |= UART_FIFO_VALID_MASK;
582
583 uart_update_timeout(port, new->c_cflag, baud);
584 bcm_uart_enable(port);
585 spin_unlock_irqrestore(&port->lock, flags);
586 }
587
588 /*
589 * serial core request to claim uart iomem
590 */
591 static int bcm_uart_request_port(struct uart_port *port)
592 {
593 /* UARTs always present */
594 return 0;
595 }
596
597 /*
598 * serial core request to release uart iomem
599 */
600 static void bcm_uart_release_port(struct uart_port *port)
601 {
602 /* Nothing to release ... */
603 }
604
605 /*
606 * serial core request to do any port required autoconfiguration
607 */
608 static void bcm_uart_config_port(struct uart_port *port, int flags)
609 {
610 if (flags & UART_CONFIG_TYPE) {
611 if (bcm_uart_request_port(port))
612 return;
613 port->type = PORT_BCM63XX;
614 }
615 }
616
617 /*
618 * serial core request to check that port information in serinfo are
619 * suitable
620 */
621 static int bcm_uart_verify_port(struct uart_port *port,
622 struct serial_struct *serinfo)
623 {
624 if (port->type != PORT_BCM63XX)
625 return -EINVAL;
626 if (port->irq != serinfo->irq)
627 return -EINVAL;
628 if (port->iotype != serinfo->io_type)
629 return -EINVAL;
630 if (port->mapbase != (unsigned long)serinfo->iomem_base)
631 return -EINVAL;
632 return 0;
633 }
634
635 /* serial core callbacks */
636 static const struct uart_ops bcm_uart_ops = {
637 .tx_empty = bcm_uart_tx_empty,
638 .get_mctrl = bcm_uart_get_mctrl,
639 .set_mctrl = bcm_uart_set_mctrl,
640 .start_tx = bcm_uart_start_tx,
641 .stop_tx = bcm_uart_stop_tx,
642 .stop_rx = bcm_uart_stop_rx,
643 .enable_ms = bcm_uart_enable_ms,
644 .break_ctl = bcm_uart_break_ctl,
645 .startup = bcm_uart_startup,
646 .shutdown = bcm_uart_shutdown,
647 .set_termios = bcm_uart_set_termios,
648 .type = bcm_uart_type,
649 .release_port = bcm_uart_release_port,
650 .request_port = bcm_uart_request_port,
651 .config_port = bcm_uart_config_port,
652 .verify_port = bcm_uart_verify_port,
653 };
654
655
656
657 #ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
658 static void wait_for_xmitr(struct uart_port *port)
659 {
660 unsigned int tmout;
661
662 /* Wait up to 10ms for the character(s) to be sent. */
663 tmout = 10000;
664 while (--tmout) {
665 unsigned int val;
666
667 val = bcm_uart_readl(port, UART_IR_REG);
668 if (val & UART_IR_STAT(UART_IR_TXEMPTY))
669 break;
670 udelay(1);
671 }
672
673 /* Wait up to 1s for flow control if necessary */
674 if (port->flags & UPF_CONS_FLOW) {
675 tmout = 1000000;
676 while (--tmout) {
677 unsigned int val;
678
679 val = bcm_uart_readl(port, UART_EXTINP_REG);
680 if (val & UART_EXTINP_CTS_MASK)
681 break;
682 udelay(1);
683 }
684 }
685 }
686
687 /*
688 * output given char
689 */
690 static void bcm_console_putchar(struct uart_port *port, int ch)
691 {
692 wait_for_xmitr(port);
693 bcm_uart_writel(port, ch, UART_FIFO_REG);
694 }
695
696 /*
697 * console core request to output given string
698 */
699 static void bcm_console_write(struct console *co, const char *s,
700 unsigned int count)
701 {
702 struct uart_port *port;
703 unsigned long flags;
704 int locked;
705
706 port = &ports[co->index];
707
708 local_irq_save(flags);
709 if (port->sysrq) {
710 /* bcm_uart_interrupt() already took the lock */
711 locked = 0;
712 } else if (oops_in_progress) {
713 locked = spin_trylock(&port->lock);
714 } else {
715 spin_lock(&port->lock);
716 locked = 1;
717 }
718
719 /* call helper to deal with \r\n */
720 uart_console_write(port, s, count, bcm_console_putchar);
721
722 /* and wait for char to be transmitted */
723 wait_for_xmitr(port);
724
725 if (locked)
726 spin_unlock(&port->lock);
727 local_irq_restore(flags);
728 }
729
730 /*
731 * console core request to setup given console, find matching uart
732 * port and setup it.
733 */
734 static int bcm_console_setup(struct console *co, char *options)
735 {
736 struct uart_port *port;
737 int baud = 9600;
738 int bits = 8;
739 int parity = 'n';
740 int flow = 'n';
741
742 if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
743 return -EINVAL;
744 port = &ports[co->index];
745 if (!port->membase)
746 return -ENODEV;
747 if (options)
748 uart_parse_options(options, &baud, &parity, &bits, &flow);
749
750 return uart_set_options(port, co, baud, parity, bits, flow);
751 }
752
753 static struct uart_driver bcm_uart_driver;
754
755 static struct console bcm63xx_console = {
756 .name = "ttyS",
757 .write = bcm_console_write,
758 .device = uart_console_device,
759 .setup = bcm_console_setup,
760 .flags = CON_PRINTBUFFER,
761 .index = -1,
762 .data = &bcm_uart_driver,
763 };
764
765 static int __init bcm63xx_console_init(void)
766 {
767 register_console(&bcm63xx_console);
768 return 0;
769 }
770
771 console_initcall(bcm63xx_console_init);
772
773 static void bcm_early_write(struct console *con, const char *s, unsigned n)
774 {
775 struct earlycon_device *dev = con->data;
776
777 uart_console_write(&dev->port, s, n, bcm_console_putchar);
778 wait_for_xmitr(&dev->port);
779 }
780
781 static int __init bcm_early_console_setup(struct earlycon_device *device,
782 const char *opt)
783 {
784 if (!device->port.membase)
785 return -ENODEV;
786
787 device->con->write = bcm_early_write;
788 return 0;
789 }
790
791 OF_EARLYCON_DECLARE(bcm63xx_uart, "brcm,bcm6345-uart", bcm_early_console_setup);
792
793 #define BCM63XX_CONSOLE (&bcm63xx_console)
794 #else
795 #define BCM63XX_CONSOLE NULL
796 #endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
797
798 static struct uart_driver bcm_uart_driver = {
799 .owner = THIS_MODULE,
800 .driver_name = "bcm63xx_uart",
801 .dev_name = "ttyS",
802 .major = TTY_MAJOR,
803 .minor = 64,
804 .nr = BCM63XX_NR_UARTS,
805 .cons = BCM63XX_CONSOLE,
806 };
807
808 /*
809 * platform driver probe/remove callback
810 */
811 static int bcm_uart_probe(struct platform_device *pdev)
812 {
813 struct resource *res_mem, *res_irq;
814 struct uart_port *port;
815 struct clk *clk;
816 int ret;
817
818 if (pdev->dev.of_node) {
819 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
820
821 if (pdev->id < 0)
822 pdev->id = of_alias_get_id(pdev->dev.of_node, "uart");
823 }
824
825 if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
826 return -EINVAL;
827
828 port = &ports[pdev->id];
829 if (port->membase)
830 return -EBUSY;
831 memset(port, 0, sizeof(*port));
832
833 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
834 if (!res_mem)
835 return -ENODEV;
836
837 port->mapbase = res_mem->start;
838 port->membase = devm_ioremap_resource(&pdev->dev, res_mem);
839 if (IS_ERR(port->membase))
840 return PTR_ERR(port->membase);
841
842 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
843 if (!res_irq)
844 return -ENODEV;
845
846 clk = clk_get(&pdev->dev, "refclk");
847 if (IS_ERR(clk) && pdev->dev.of_node)
848 clk = of_clk_get(pdev->dev.of_node, 0);
849
850 if (IS_ERR(clk))
851 return -ENODEV;
852
853 port->iotype = UPIO_MEM;
854 port->irq = res_irq->start;
855 port->ops = &bcm_uart_ops;
856 port->flags = UPF_BOOT_AUTOCONF;
857 port->dev = &pdev->dev;
858 port->fifosize = 16;
859 port->uartclk = clk_get_rate(clk) / 2;
860 port->line = pdev->id;
861 clk_put(clk);
862
863 ret = uart_add_one_port(&bcm_uart_driver, port);
864 if (ret) {
865 ports[pdev->id].membase = NULL;
866 return ret;
867 }
868 platform_set_drvdata(pdev, port);
869 return 0;
870 }
871
872 static int bcm_uart_remove(struct platform_device *pdev)
873 {
874 struct uart_port *port;
875
876 port = platform_get_drvdata(pdev);
877 uart_remove_one_port(&bcm_uart_driver, port);
878 /* mark port as free */
879 ports[pdev->id].membase = NULL;
880 return 0;
881 }
882
883 static const struct of_device_id bcm63xx_of_match[] = {
884 { .compatible = "brcm,bcm6345-uart" },
885 { /* sentinel */ }
886 };
887 MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
888
889 /*
890 * platform driver stuff
891 */
892 static struct platform_driver bcm_uart_platform_driver = {
893 .probe = bcm_uart_probe,
894 .remove = bcm_uart_remove,
895 .driver = {
896 .name = "bcm63xx_uart",
897 .of_match_table = bcm63xx_of_match,
898 },
899 };
900
901 static int __init bcm_uart_init(void)
902 {
903 int ret;
904
905 ret = uart_register_driver(&bcm_uart_driver);
906 if (ret)
907 return ret;
908
909 ret = platform_driver_register(&bcm_uart_platform_driver);
910 if (ret)
911 uart_unregister_driver(&bcm_uart_driver);
912
913 return ret;
914 }
915
916 static void __exit bcm_uart_exit(void)
917 {
918 platform_driver_unregister(&bcm_uart_platform_driver);
919 uart_unregister_driver(&bcm_uart_driver);
920 }
921
922 module_init(bcm_uart_init);
923 module_exit(bcm_uart_exit);
924
925 MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
926 MODULE_DESCRIPTION("Broadcom 63xx integrated uart driver");
927 MODULE_LICENSE("GPL");
CRIS linux kernel tree