Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / drivers / tty / serial / bfin_sport_uart.h
blob4b12f45d6580e82a1471e434bca9857d0e015511
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Blackfin On-Chip Sport Emulated UART Driver
5 * Copyright 2006-2008 Analog Devices Inc.
7 * Enter bugs at http://blackfin.uclinux.org/
8 */
11 * This driver and the hardware supported are in term of EE-191 of ADI.
12 * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
13 * This application note describe how to implement a UART on a Sharc DSP,
14 * but this driver is implemented on Blackfin Processor.
15 * Transmit Frame Sync is not used by this driver to transfer data out.
18 #ifndef _BFIN_SPORT_UART_H
19 #define _BFIN_SPORT_UART_H
21 #define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */
22 #define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */
23 #define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */
24 #define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */
25 #define OFFSET_TX 0x10 /* Transmit Data Register */
26 #define OFFSET_RX 0x18 /* Receive Data Register */
27 #define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */
28 #define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */
29 #define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */
30 #define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */
31 #define OFFSET_STAT 0x30 /* Status Register */
33 #define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1))
34 #define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2))
35 #define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV))
36 #define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
37 #define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX))
38 #define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX))
40 * If another interrupt fires while doing a 32-bit read from RX FIFO,
41 * a fake RX underflow error will be generated. So disable interrupts
42 * to prevent interruption while reading the FIFO.
44 #define SPORT_GET_RX32(sport) \
45 ({ \
46 unsigned int __ret; \
47 unsigned long flags; \
48 if (ANOMALY_05000473) \
49 local_irq_save(flags); \
50 __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
51 if (ANOMALY_05000473) \
52 local_irq_restore(flags); \
53 __ret; \
55 #define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1))
56 #define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2))
57 #define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
58 #define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV))
59 #define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT))
61 #define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v)
62 #define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v)
63 #define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v)
64 #define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v)
65 #define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v)
66 #define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v)
67 #define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v)
68 #define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v)
69 #define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
70 #define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
71 #define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
73 #define SPORT_TX_FIFO_SIZE 8
75 #define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin)
76 #define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
77 #define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
79 #if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \
80 || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \
81 || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \
82 || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS)
83 # define CONFIG_SERIAL_BFIN_SPORT_CTSRTS
84 #endif
86 #endif /* _BFIN_SPORT_UART_H */