drivers/tty/serial/lpc32xx_hs.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * High Speed Serial Ports on NXP LPC32xx SoC
   4  *
   5  * Authors: Kevin Wells <kevin.wells@nxp.com>
   6  *          Roland Stigge <stigge@antcom.de>
   7  *
   8  * Copyright (C) 2010 NXP Semiconductors
   9  * Copyright (C) 2012 Roland Stigge
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/ioport.h>
  14 #include <linux/init.h>
  15 #include <linux/console.h>
  16 #include <linux/sysrq.h>
  17 #include <linux/tty.h>
  18 #include <linux/tty_flip.h>
  19 #include <linux/serial_core.h>
  20 #include <linux/serial.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/delay.h>
  23 #include <linux/nmi.h>
  24 #include <linux/io.h>
  25 #include <linux/irq.h>
  26 #include <linux/gpio.h>
  27 #include <linux/of.h>
  28 #include <mach/platform.h>
  29 #include <mach/hardware.h>
  30
  31 /*
  32  * High Speed UART register offsets
  33  */
  34 #define LPC32XX_HSUART_FIFO(x)                  ((x) + 0x00)
  35 #define LPC32XX_HSUART_LEVEL(x)                 ((x) + 0x04)
  36 #define LPC32XX_HSUART_IIR(x)                   ((x) + 0x08)
  37 #define LPC32XX_HSUART_CTRL(x)                  ((x) + 0x0C)
  38 #define LPC32XX_HSUART_RATE(x)                  ((x) + 0x10)
  39
  40 #define LPC32XX_HSU_BREAK_DATA                  (1 << 10)
  41 #define LPC32XX_HSU_ERROR_DATA                  (1 << 9)
  42 #define LPC32XX_HSU_RX_EMPTY                    (1 << 8)
  43
  44 #define LPC32XX_HSU_TX_LEV(n)                   (((n) >> 8) & 0xFF)
  45 #define LPC32XX_HSU_RX_LEV(n)                   ((n) & 0xFF)
  46
  47 #define LPC32XX_HSU_TX_INT_SET                  (1 << 6)
  48 #define LPC32XX_HSU_RX_OE_INT                   (1 << 5)
  49 #define LPC32XX_HSU_BRK_INT                     (1 << 4)
  50 #define LPC32XX_HSU_FE_INT                      (1 << 3)
  51 #define LPC32XX_HSU_RX_TIMEOUT_INT              (1 << 2)
  52 #define LPC32XX_HSU_RX_TRIG_INT                 (1 << 1)
  53 #define LPC32XX_HSU_TX_INT                      (1 << 0)
  54
  55 #define LPC32XX_HSU_HRTS_INV                    (1 << 21)
  56 #define LPC32XX_HSU_HRTS_TRIG_8B                (0x0 << 19)
  57 #define LPC32XX_HSU_HRTS_TRIG_16B               (0x1 << 19)
  58 #define LPC32XX_HSU_HRTS_TRIG_32B               (0x2 << 19)
  59 #define LPC32XX_HSU_HRTS_TRIG_48B               (0x3 << 19)
  60 #define LPC32XX_HSU_HRTS_EN                     (1 << 18)
  61 #define LPC32XX_HSU_TMO_DISABLED                (0x0 << 16)
  62 #define LPC32XX_HSU_TMO_INACT_4B                (0x1 << 16)
  63 #define LPC32XX_HSU_TMO_INACT_8B                (0x2 << 16)
  64 #define LPC32XX_HSU_TMO_INACT_16B               (0x3 << 16)
  65 #define LPC32XX_HSU_HCTS_INV                    (1 << 15)
  66 #define LPC32XX_HSU_HCTS_EN                     (1 << 14)
  67 #define LPC32XX_HSU_OFFSET(n)                   ((n) << 9)
  68 #define LPC32XX_HSU_BREAK                       (1 << 8)
  69 #define LPC32XX_HSU_ERR_INT_EN                  (1 << 7)
  70 #define LPC32XX_HSU_RX_INT_EN                   (1 << 6)
  71 #define LPC32XX_HSU_TX_INT_EN                   (1 << 5)
  72 #define LPC32XX_HSU_RX_TL1B                     (0x0 << 2)
  73 #define LPC32XX_HSU_RX_TL4B                     (0x1 << 2)
  74 #define LPC32XX_HSU_RX_TL8B                     (0x2 << 2)
  75 #define LPC32XX_HSU_RX_TL16B                    (0x3 << 2)
  76 #define LPC32XX_HSU_RX_TL32B                    (0x4 << 2)
  77 #define LPC32XX_HSU_RX_TL48B                    (0x5 << 2)
  78 #define LPC32XX_HSU_TX_TLEMPTY                  (0x0 << 0)
  79 #define LPC32XX_HSU_TX_TL0B                     (0x0 << 0)
  80 #define LPC32XX_HSU_TX_TL4B                     (0x1 << 0)
  81 #define LPC32XX_HSU_TX_TL8B                     (0x2 << 0)
  82 #define LPC32XX_HSU_TX_TL16B                    (0x3 << 0)
  83
  84 #define MODNAME "lpc32xx_hsuart"
  85
  86 struct lpc32xx_hsuart_port {
  87         struct uart_port port;
  88 };
  89
  90 #define FIFO_READ_LIMIT 128
  91 #define MAX_PORTS 3
  92 #define LPC32XX_TTY_NAME "ttyTX"
  93 static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS];
  94
  95 #ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE
  96 static void wait_for_xmit_empty(struct uart_port *port)
  97 {
  98         unsigned int timeout = 10000;
  99
 100         do {
 101                 if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
 102                                                         port->membase))) == 0)
 103                         break;
 104                 if (--timeout == 0)
 105                         break;
 106                 udelay(1);
 107         } while (1);
 108 }
 109
 110 static void wait_for_xmit_ready(struct uart_port *port)
 111 {
 112         unsigned int timeout = 10000;
 113
 114         while (1) {
 115                 if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
 116                                                         port->membase))) < 32)
 117                         break;
 118                 if (--timeout == 0)
 119                         break;
 120                 udelay(1);
 121         }
 122 }
 123
 124 static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch)
 125 {
 126         wait_for_xmit_ready(port);
 127         writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase));
 128 }
 129
 130 static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
 131                                          unsigned int count)
 132 {
 133         struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index];
 134         unsigned long flags;
 135         int locked = 1;
 136
 137         touch_nmi_watchdog();
 138         local_irq_save(flags);
 139         if (up->port.sysrq)
 140                 locked = 0;
 141         else if (oops_in_progress)
 142                 locked = spin_trylock(&up->port.lock);
 143         else
 144                 spin_lock(&up->port.lock);
 145
 146         uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
 147         wait_for_xmit_empty(&up->port);
 148
 149         if (locked)
 150                 spin_unlock(&up->port.lock);
 151         local_irq_restore(flags);
 152 }
 153
 154 static int __init lpc32xx_hsuart_console_setup(struct console *co,
 155                                                char *options)
 156 {
 157         struct uart_port *port;
 158         int baud = 115200;
 159         int bits = 8;
 160         int parity = 'n';
 161         int flow = 'n';
 162
 163         if (co->index >= MAX_PORTS)
 164                 co->index = 0;
 165
 166         port = &lpc32xx_hs_ports[co->index].port;
 167         if (!port->membase)
 168                 return -ENODEV;
 169
 170         if (options)
 171                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 172
 173         return uart_set_options(port, co, baud, parity, bits, flow);
 174 }
 175
 176 static struct uart_driver lpc32xx_hsuart_reg;
 177 static struct console lpc32xx_hsuart_console = {
 178         .name           = LPC32XX_TTY_NAME,
 179         .write          = lpc32xx_hsuart_console_write,
 180         .device         = uart_console_device,
 181         .setup          = lpc32xx_hsuart_console_setup,
 182         .flags          = CON_PRINTBUFFER,
 183         .index          = -1,
 184         .data           = &lpc32xx_hsuart_reg,
 185 };
 186
 187 static int __init lpc32xx_hsuart_console_init(void)
 188 {
 189         register_console(&lpc32xx_hsuart_console);
 190         return 0;
 191 }
 192 console_initcall(lpc32xx_hsuart_console_init);
 193
 194 #define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console)
 195 #else
 196 #define LPC32XX_HSUART_CONSOLE NULL
 197 #endif
 198
 199 static struct uart_driver lpc32xx_hs_reg = {
 200         .owner          = THIS_MODULE,
 201         .driver_name    = MODNAME,
 202         .dev_name       = LPC32XX_TTY_NAME,
 203         .nr             = MAX_PORTS,
 204         .cons           = LPC32XX_HSUART_CONSOLE,
 205 };
 206 static int uarts_registered;
 207
 208 static unsigned int __serial_get_clock_div(unsigned long uartclk,
 209                                            unsigned long rate)
 210 {
 211         u32 div, goodrate, hsu_rate, l_hsu_rate, comprate;
 212         u32 rate_diff;
 213
 214         /* Find the closest divider to get the desired clock rate */
 215         div = uartclk / rate;
 216         goodrate = hsu_rate = (div / 14) - 1;
 217         if (hsu_rate != 0)
 218                 hsu_rate--;
 219
 220         /* Tweak divider */
 221         l_hsu_rate = hsu_rate + 3;
 222         rate_diff = 0xFFFFFFFF;
 223
 224         while (hsu_rate < l_hsu_rate) {
 225                 comprate = uartclk / ((hsu_rate + 1) * 14);
 226                 if (abs(comprate - rate) < rate_diff) {
 227                         goodrate = hsu_rate;
 228                         rate_diff = abs(comprate - rate);
 229                 }
 230
 231                 hsu_rate++;
 232         }
 233         if (hsu_rate > 0xFF)
 234                 hsu_rate = 0xFF;
 235
 236         return goodrate;
 237 }
 238
 239 static void __serial_uart_flush(struct uart_port *port)
 240 {
 241         u32 tmp;
 242         int cnt = 0;
 243
 244         while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
 245                (cnt++ < FIFO_READ_LIMIT))
 246                 tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
 247 }
 248
 249 static void __serial_lpc32xx_rx(struct uart_port *port)
 250 {
 251         struct tty_port *tport = &port->state->port;
 252         unsigned int tmp, flag;
 253
 254         /* Read data from FIFO and push into terminal */
 255         tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
 256         while (!(tmp & LPC32XX_HSU_RX_EMPTY)) {
 257                 flag = TTY_NORMAL;
 258                 port->icount.rx++;
 259
 260                 if (tmp & LPC32XX_HSU_ERROR_DATA) {
 261                         /* Framing error */
 262                         writel(LPC32XX_HSU_FE_INT,
 263                                LPC32XX_HSUART_IIR(port->membase));
 264                         port->icount.frame++;
 265                         flag = TTY_FRAME;
 266                         tty_insert_flip_char(tport, 0, TTY_FRAME);
 267                 }
 268
 269                 tty_insert_flip_char(tport, (tmp & 0xFF), flag);
 270
 271                 tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
 272         }
 273
 274         spin_unlock(&port->lock);
 275         tty_flip_buffer_push(tport);
 276         spin_lock(&port->lock);
 277 }
 278
 279 static void __serial_lpc32xx_tx(struct uart_port *port)
 280 {
 281         struct circ_buf *xmit = &port->state->xmit;
 282         unsigned int tmp;
 283
 284         if (port->x_char) {
 285                 writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
 286                 port->icount.tx++;
 287                 port->x_char = 0;
 288                 return;
 289         }
 290
 291         if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 292                 goto exit_tx;
 293
 294         /* Transfer data */
 295         while (LPC32XX_HSU_TX_LEV(readl(
 296                 LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
 297                 writel((u32) xmit->buf[xmit->tail],
 298                        LPC32XX_HSUART_FIFO(port->membase));
 299                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 300                 port->icount.tx++;
 301                 if (uart_circ_empty(xmit))
 302                         break;
 303         }
 304
 305         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 306                 uart_write_wakeup(port);
 307
 308 exit_tx:
 309         if (uart_circ_empty(xmit)) {
 310                 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 311                 tmp &= ~LPC32XX_HSU_TX_INT_EN;
 312                 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 313         }
 314 }
 315
 316 static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
 317 {
 318         struct uart_port *port = dev_id;
 319         struct tty_port *tport = &port->state->port;
 320         u32 status;
 321
 322         spin_lock(&port->lock);
 323
 324         /* Read UART status and clear latched interrupts */
 325         status = readl(LPC32XX_HSUART_IIR(port->membase));
 326
 327         if (status & LPC32XX_HSU_BRK_INT) {
 328                 /* Break received */
 329                 writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase));
 330                 port->icount.brk++;
 331                 uart_handle_break(port);
 332         }
 333
 334         /* Framing error */
 335         if (status & LPC32XX_HSU_FE_INT)
 336                 writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase));
 337
 338         if (status & LPC32XX_HSU_RX_OE_INT) {
 339                 /* Receive FIFO overrun */
 340                 writel(LPC32XX_HSU_RX_OE_INT,
 341                        LPC32XX_HSUART_IIR(port->membase));
 342                 port->icount.overrun++;
 343                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 344                 tty_schedule_flip(tport);
 345         }
 346
 347         /* Data received? */
 348         if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT))
 349                 __serial_lpc32xx_rx(port);
 350
 351         /* Transmit data request? */
 352         if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) {
 353                 writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase));
 354                 __serial_lpc32xx_tx(port);
 355         }
 356
 357         spin_unlock(&port->lock);
 358
 359         return IRQ_HANDLED;
 360 }
 361
 362 /* port->lock is not held.  */
 363 static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port)
 364 {
 365         unsigned int ret = 0;
 366
 367         if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0)
 368                 ret = TIOCSER_TEMT;
 369
 370         return ret;
 371 }
 372
 373 /* port->lock held by caller.  */
 374 static void serial_lpc32xx_set_mctrl(struct uart_port *port,
 375                                      unsigned int mctrl)
 376 {
 377         /* No signals are supported on HS UARTs */
 378 }
 379
 380 /* port->lock is held by caller and interrupts are disabled.  */
 381 static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port)
 382 {
 383         /* No signals are supported on HS UARTs */
 384         return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 385 }
 386
 387 /* port->lock held by caller.  */
 388 static void serial_lpc32xx_stop_tx(struct uart_port *port)
 389 {
 390         u32 tmp;
 391
 392         tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 393         tmp &= ~LPC32XX_HSU_TX_INT_EN;
 394         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 395 }
 396
 397 /* port->lock held by caller.  */
 398 static void serial_lpc32xx_start_tx(struct uart_port *port)
 399 {
 400         u32 tmp;
 401
 402         __serial_lpc32xx_tx(port);
 403         tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 404         tmp |= LPC32XX_HSU_TX_INT_EN;
 405         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 406 }
 407
 408 /* port->lock held by caller.  */
 409 static void serial_lpc32xx_stop_rx(struct uart_port *port)
 410 {
 411         u32 tmp;
 412
 413         tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 414         tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
 415         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 416
 417         writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT |
 418                 LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase));
 419 }
 420
 421 /* port->lock is not held.  */
 422 static void serial_lpc32xx_break_ctl(struct uart_port *port,
 423                                      int break_state)
 424 {
 425         unsigned long flags;
 426         u32 tmp;
 427
 428         spin_lock_irqsave(&port->lock, flags);
 429         tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 430         if (break_state != 0)
 431                 tmp |= LPC32XX_HSU_BREAK;
 432         else
 433                 tmp &= ~LPC32XX_HSU_BREAK;
 434         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 435         spin_unlock_irqrestore(&port->lock, flags);
 436 }
 437
 438 /* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
 439 static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
 440 {
 441         int bit;
 442         u32 tmp;
 443
 444         switch (mapbase) {
 445         case LPC32XX_HS_UART1_BASE:
 446                 bit = 0;
 447                 break;
 448         case LPC32XX_HS_UART2_BASE:
 449                 bit = 1;
 450                 break;
 451         case LPC32XX_HS_UART7_BASE:
 452                 bit = 6;
 453                 break;
 454         default:
 455                 WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
 456                 return;
 457         }
 458
 459         tmp = readl(LPC32XX_UARTCTL_CLOOP);
 460         if (state)
 461                 tmp |= (1 << bit);
 462         else
 463                 tmp &= ~(1 << bit);
 464         writel(tmp, LPC32XX_UARTCTL_CLOOP);
 465 }
 466
 467 /* port->lock is not held.  */
 468 static int serial_lpc32xx_startup(struct uart_port *port)
 469 {
 470         int retval;
 471         unsigned long flags;
 472         u32 tmp;
 473
 474         spin_lock_irqsave(&port->lock, flags);
 475
 476         __serial_uart_flush(port);
 477
 478         writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
 479                 LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
 480                LPC32XX_HSUART_IIR(port->membase));
 481
 482         writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
 483
 484         /*
 485          * Set receiver timeout, HSU offset of 20, no break, no interrupts,
 486          * and default FIFO trigger levels
 487          */
 488         tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
 489                 LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
 490         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 491
 492         lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
 493
 494         spin_unlock_irqrestore(&port->lock, flags);
 495
 496         retval = request_irq(port->irq, serial_lpc32xx_interrupt,
 497                              0, MODNAME, port);
 498         if (!retval)
 499                 writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN),
 500                        LPC32XX_HSUART_CTRL(port->membase));
 501
 502         return retval;
 503 }
 504
 505 /* port->lock is not held.  */
 506 static void serial_lpc32xx_shutdown(struct uart_port *port)
 507 {
 508         u32 tmp;
 509         unsigned long flags;
 510
 511         spin_lock_irqsave(&port->lock, flags);
 512
 513         tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
 514                 LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
 515         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 516
 517         lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */
 518
 519         spin_unlock_irqrestore(&port->lock, flags);
 520
 521         free_irq(port->irq, port);
 522 }
 523
 524 /* port->lock is not held.  */
 525 static void serial_lpc32xx_set_termios(struct uart_port *port,
 526                                        struct ktermios *termios,
 527                                        struct ktermios *old)
 528 {
 529         unsigned long flags;
 530         unsigned int baud, quot;
 531         u32 tmp;
 532
 533         /* Always 8-bit, no parity, 1 stop bit */
 534         termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
 535         termios->c_cflag |= CS8;
 536
 537         termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS);
 538
 539         baud = uart_get_baud_rate(port, termios, old, 0,
 540                                   port->uartclk / 14);
 541
 542         quot = __serial_get_clock_div(port->uartclk, baud);
 543
 544         spin_lock_irqsave(&port->lock, flags);
 545
 546         /* Ignore characters? */
 547         tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
 548         if ((termios->c_cflag & CREAD) == 0)
 549                 tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
 550         else
 551                 tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN;
 552         writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
 553
 554         writel(quot, LPC32XX_HSUART_RATE(port->membase));
 555
 556         uart_update_timeout(port, termios->c_cflag, baud);
 557
 558         spin_unlock_irqrestore(&port->lock, flags);
 559
 560         /* Don't rewrite B0 */
 561         if (tty_termios_baud_rate(termios))
 562                 tty_termios_encode_baud_rate(termios, baud, baud);
 563 }
 564
 565 static const char *serial_lpc32xx_type(struct uart_port *port)
 566 {
 567         return MODNAME;
 568 }
 569
 570 static void serial_lpc32xx_release_port(struct uart_port *port)
 571 {
 572         if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
 573                 if (port->flags & UPF_IOREMAP) {
 574                         iounmap(port->membase);
 575                         port->membase = NULL;
 576                 }
 577
 578                 release_mem_region(port->mapbase, SZ_4K);
 579         }
 580 }
 581
 582 static int serial_lpc32xx_request_port(struct uart_port *port)
 583 {
 584         int ret = -ENODEV;
 585
 586         if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
 587                 ret = 0;
 588
 589                 if (!request_mem_region(port->mapbase, SZ_4K, MODNAME))
 590                         ret = -EBUSY;
 591                 else if (port->flags & UPF_IOREMAP) {
 592                         port->membase = ioremap(port->mapbase, SZ_4K);
 593                         if (!port->membase) {
 594                                 release_mem_region(port->mapbase, SZ_4K);
 595                                 ret = -ENOMEM;
 596                         }
 597                 }
 598         }
 599
 600         return ret;
 601 }
 602
 603 static void serial_lpc32xx_config_port(struct uart_port *port, int uflags)
 604 {
 605         int ret;
 606
 607         ret = serial_lpc32xx_request_port(port);
 608         if (ret < 0)
 609                 return;
 610         port->type = PORT_UART00;
 611         port->fifosize = 64;
 612
 613         __serial_uart_flush(port);
 614
 615         writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
 616                 LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
 617                LPC32XX_HSUART_IIR(port->membase));
 618
 619         writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
 620
 621         /* Set receiver timeout, HSU offset of 20, no break, no interrupts,
 622            and default FIFO trigger levels */
 623         writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
 624                LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B,
 625                LPC32XX_HSUART_CTRL(port->membase));
 626 }
 627
 628 static int serial_lpc32xx_verify_port(struct uart_port *port,
 629                                       struct serial_struct *ser)
 630 {
 631         int ret = 0;
 632
 633         if (ser->type != PORT_UART00)
 634                 ret = -EINVAL;
 635
 636         return ret;
 637 }
 638
 639 static const struct uart_ops serial_lpc32xx_pops = {
 640         .tx_empty       = serial_lpc32xx_tx_empty,
 641         .set_mctrl      = serial_lpc32xx_set_mctrl,
 642         .get_mctrl      = serial_lpc32xx_get_mctrl,
 643         .stop_tx        = serial_lpc32xx_stop_tx,
 644         .start_tx       = serial_lpc32xx_start_tx,
 645         .stop_rx        = serial_lpc32xx_stop_rx,
 646         .break_ctl      = serial_lpc32xx_break_ctl,
 647         .startup        = serial_lpc32xx_startup,
 648         .shutdown       = serial_lpc32xx_shutdown,
 649         .set_termios    = serial_lpc32xx_set_termios,
 650         .type           = serial_lpc32xx_type,
 651         .release_port   = serial_lpc32xx_release_port,
 652         .request_port   = serial_lpc32xx_request_port,
 653         .config_port    = serial_lpc32xx_config_port,
 654         .verify_port    = serial_lpc32xx_verify_port,
 655 };
 656
 657 /*
 658  * Register a set of serial devices attached to a platform device
 659  */
 660 static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
 661 {
 662         struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
 663         int ret = 0;
 664         struct resource *res;
 665
 666         if (uarts_registered >= MAX_PORTS) {
 667                 dev_err(&pdev->dev,
 668                         "Error: Number of possible ports exceeded (%d)!\n",
 669                         uarts_registered + 1);
 670                 return -ENXIO;
 671         }
 672
 673         memset(p, 0, sizeof(*p));
 674
 675         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 676         if (!res) {
 677                 dev_err(&pdev->dev,
 678                         "Error getting mem resource for HS UART port %d\n",
 679                         uarts_registered);
 680                 return -ENXIO;
 681         }
 682         p->port.mapbase = res->start;
 683         p->port.membase = NULL;
 684
 685         ret = platform_get_irq(pdev, 0);
 686         if (ret < 0) {
 687                 dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
 688                         uarts_registered);
 689                 return ret;
 690         }
 691         p->port.irq = ret;
 692
 693         p->port.iotype = UPIO_MEM32;
 694         p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
 695         p->port.regshift = 2;
 696         p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
 697         p->port.dev = &pdev->dev;
 698         p->port.ops = &serial_lpc32xx_pops;
 699         p->port.line = uarts_registered++;
 700         spin_lock_init(&p->port.lock);
 701
 702         /* send port to loopback mode by default */
 703         lpc32xx_loopback_set(p->port.mapbase, 1);
 704
 705         ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port);
 706
 707         platform_set_drvdata(pdev, p);
 708
 709         return ret;
 710 }
 711
 712 /*
 713  * Remove serial ports registered against a platform device.
 714  */
 715 static int serial_hs_lpc32xx_remove(struct platform_device *pdev)
 716 {
 717         struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
 718
 719         uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
 720
 721         return 0;
 722 }
 723
 724
 725 #ifdef CONFIG_PM
 726 static int serial_hs_lpc32xx_suspend(struct platform_device *pdev,
 727                                      pm_message_t state)
 728 {
 729         struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
 730
 731         uart_suspend_port(&lpc32xx_hs_reg, &p->port);
 732
 733         return 0;
 734 }
 735
 736 static int serial_hs_lpc32xx_resume(struct platform_device *pdev)
 737 {
 738         struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
 739
 740         uart_resume_port(&lpc32xx_hs_reg, &p->port);
 741
 742         return 0;
 743 }
 744 #else
 745 #define serial_hs_lpc32xx_suspend       NULL
 746 #define serial_hs_lpc32xx_resume        NULL
 747 #endif
 748
 749 static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = {
 750         { .compatible = "nxp,lpc3220-hsuart" },
 751         { /* sentinel */ }
 752 };
 753
 754 MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
 755
 756 static struct platform_driver serial_hs_lpc32xx_driver = {
 757         .probe          = serial_hs_lpc32xx_probe,
 758         .remove         = serial_hs_lpc32xx_remove,
 759         .suspend        = serial_hs_lpc32xx_suspend,
 760         .resume         = serial_hs_lpc32xx_resume,
 761         .driver         = {
 762                 .name   = MODNAME,
 763                 .of_match_table = serial_hs_lpc32xx_dt_ids,
 764         },
 765 };
 766
 767 static int __init lpc32xx_hsuart_init(void)
 768 {
 769         int ret;
 770
 771         ret = uart_register_driver(&lpc32xx_hs_reg);
 772         if (ret)
 773                 return ret;
 774
 775         ret = platform_driver_register(&serial_hs_lpc32xx_driver);
 776         if (ret)
 777                 uart_unregister_driver(&lpc32xx_hs_reg);
 778
 779         return ret;
 780 }
 781
 782 static void __exit lpc32xx_hsuart_exit(void)
 783 {
 784         platform_driver_unregister(&serial_hs_lpc32xx_driver);
 785         uart_unregister_driver(&lpc32xx_hs_reg);
 786 }
 787
 788 module_init(lpc32xx_hsuart_init);
 789 module_exit(lpc32xx_hsuart_exit);
 790
 791 MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
 792 MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
 793 MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver");
 794 MODULE_LICENSE("GPL");