drivers/tty/serial/sh-sci.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #include <linux/bitops.h>
   3 #include <linux/serial_core.h>
   4 #include <linux/io.h>
   5 #include <linux/gpio.h>
   6
   7 #define SCI_MAJOR               204
   8 #define SCI_MINOR_START         8
   9
  10
  11 /*
  12  * SCI register subset common for all port types.
  13  * Not all registers will exist on all parts.
  14  */
  15 enum {
  16         SCSMR,                          /* Serial Mode Register */
  17         SCBRR,                          /* Bit Rate Register */
  18         SCSCR,                          /* Serial Control Register */
  19         SCxSR,                          /* Serial Status Register */
  20         SCFCR,                          /* FIFO Control Register */
  21         SCFDR,                          /* FIFO Data Count Register */
  22         SCxTDR,                         /* Transmit (FIFO) Data Register */
  23         SCxRDR,                         /* Receive (FIFO) Data Register */
  24         SCLSR,                          /* Line Status Register */
  25         SCTFDR,                         /* Transmit FIFO Data Count Register */
  26         SCRFDR,                         /* Receive FIFO Data Count Register */
  27         SCSPTR,                         /* Serial Port Register */
  28         HSSRR,                          /* Sampling Rate Register */
  29         SCPCR,                          /* Serial Port Control Register */
  30         SCPDR,                          /* Serial Port Data Register */
  31         SCDL,                           /* BRG Frequency Division Register */
  32         SCCKS,                          /* BRG Clock Select Register */
  33         HSRTRGR,                        /* Rx FIFO Data Count Trigger Register */
  34         HSTTRGR,                        /* Tx FIFO Data Count Trigger Register */
  35
  36         SCIx_NR_REGS,
  37 };
  38
  39
  40 /* SCSMR (Serial Mode Register) */
  41 #define SCSMR_C_A       BIT(7)  /* Communication Mode */
  42 #define SCSMR_CSYNC     BIT(7)  /*   - Clocked synchronous mode */
  43 #define SCSMR_ASYNC     0       /*   - Asynchronous mode */
  44 #define SCSMR_CHR       BIT(6)  /* 7-bit Character Length */
  45 #define SCSMR_PE        BIT(5)  /* Parity Enable */
  46 #define SCSMR_ODD       BIT(4)  /* Odd Parity */
  47 #define SCSMR_STOP      BIT(3)  /* Stop Bit Length */
  48 #define SCSMR_CKS       0x0003  /* Clock Select */
  49
  50 /* Serial Mode Register, SCIFA/SCIFB only bits */
  51 #define SCSMR_CKEDG     BIT(12) /* Transmit/Receive Clock Edge Select */
  52 #define SCSMR_SRC_MASK  0x0700  /* Sampling Control */
  53 #define SCSMR_SRC_16    0x0000  /* Sampling rate 1/16 */
  54 #define SCSMR_SRC_5     0x0100  /* Sampling rate 1/5 */
  55 #define SCSMR_SRC_7     0x0200  /* Sampling rate 1/7 */
  56 #define SCSMR_SRC_11    0x0300  /* Sampling rate 1/11 */
  57 #define SCSMR_SRC_13    0x0400  /* Sampling rate 1/13 */
  58 #define SCSMR_SRC_17    0x0500  /* Sampling rate 1/17 */
  59 #define SCSMR_SRC_19    0x0600  /* Sampling rate 1/19 */
  60 #define SCSMR_SRC_27    0x0700  /* Sampling rate 1/27 */
  61
  62 /* Serial Control Register, SCIFA/SCIFB only bits */
  63 #define SCSCR_TDRQE     BIT(15) /* Tx Data Transfer Request Enable */
  64 #define SCSCR_RDRQE     BIT(14) /* Rx Data Transfer Request Enable */
  65
  66 /* Serial Control Register, HSCIF-only bits */
  67 #define HSSCR_TOT_SHIFT 14
  68
  69 /* SCxSR (Serial Status Register) on SCI */
  70 #define SCI_TDRE        BIT(7)  /* Transmit Data Register Empty */
  71 #define SCI_RDRF        BIT(6)  /* Receive Data Register Full */
  72 #define SCI_ORER        BIT(5)  /* Overrun Error */
  73 #define SCI_FER         BIT(4)  /* Framing Error */
  74 #define SCI_PER         BIT(3)  /* Parity Error */
  75 #define SCI_TEND        BIT(2)  /* Transmit End */
  76 #define SCI_RESERVED    0x03    /* All reserved bits */
  77
  78 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
  79
  80 #define SCI_RDxF_CLEAR  (u32)(~(SCI_RESERVED | SCI_RDRF))
  81 #define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
  82 #define SCI_TDxE_CLEAR  (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE))
  83 #define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
  84
  85 /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
  86 #define SCIF_ER         BIT(7)  /* Receive Error */
  87 #define SCIF_TEND       BIT(6)  /* Transmission End */
  88 #define SCIF_TDFE       BIT(5)  /* Transmit FIFO Data Empty */
  89 #define SCIF_BRK        BIT(4)  /* Break Detect */
  90 #define SCIF_FER        BIT(3)  /* Framing Error */
  91 #define SCIF_PER        BIT(2)  /* Parity Error */
  92 #define SCIF_RDF        BIT(1)  /* Receive FIFO Data Full */
  93 #define SCIF_DR         BIT(0)  /* Receive Data Ready */
  94 /* SCIF only (optional) */
  95 #define SCIF_PERC       0xf000  /* Number of Parity Errors */
  96 #define SCIF_FERC       0x0f00  /* Number of Framing Errors */
  97 /*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
  98 #define SCIFA_ORER      BIT(9)  /* Overrun Error */
  99
 100 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
 101
 102 #define SCIF_RDxF_CLEAR         (u32)(~(SCIF_DR | SCIF_RDF))
 103 #define SCIF_ERROR_CLEAR        (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
 104 #define SCIF_TDxE_CLEAR         (u32)(~(SCIF_TDFE))
 105 #define SCIF_BREAK_CLEAR        (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
 106
 107 /* SCFCR (FIFO Control Register) */
 108 #define SCFCR_RTRG1     BIT(7)  /* Receive FIFO Data Count Trigger */
 109 #define SCFCR_RTRG0     BIT(6)
 110 #define SCFCR_TTRG1     BIT(5)  /* Transmit FIFO Data Count Trigger */
 111 #define SCFCR_TTRG0     BIT(4)
 112 #define SCFCR_MCE       BIT(3)  /* Modem Control Enable */
 113 #define SCFCR_TFRST     BIT(2)  /* Transmit FIFO Data Register Reset */
 114 #define SCFCR_RFRST     BIT(1)  /* Receive FIFO Data Register Reset */
 115 #define SCFCR_LOOP      BIT(0)  /* Loopback Test */
 116
 117 /* SCLSR (Line Status Register) on (H)SCIF */
 118 #define SCLSR_TO        BIT(2)  /* Timeout */
 119 #define SCLSR_ORER      BIT(0)  /* Overrun Error */
 120
 121 /* SCSPTR (Serial Port Register), optional */
 122 #define SCSPTR_RTSIO    BIT(7)  /* Serial Port RTS# Pin Input/Output */
 123 #define SCSPTR_RTSDT    BIT(6)  /* Serial Port RTS# Pin Data */
 124 #define SCSPTR_CTSIO    BIT(5)  /* Serial Port CTS# Pin Input/Output */
 125 #define SCSPTR_CTSDT    BIT(4)  /* Serial Port CTS# Pin Data */
 126 #define SCSPTR_SCKIO    BIT(3)  /* Serial Port Clock Pin Input/Output */
 127 #define SCSPTR_SCKDT    BIT(2)  /* Serial Port Clock Pin Data */
 128 #define SCSPTR_SPB2IO   BIT(1)  /* Serial Port Break Input/Output */
 129 #define SCSPTR_SPB2DT   BIT(0)  /* Serial Port Break Data */
 130
 131 /* HSSRR HSCIF */
 132 #define HSCIF_SRE       BIT(15) /* Sampling Rate Register Enable */
 133
 134 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
 135 #define SCPCR_RTSC      BIT(4)  /* Serial Port RTS# Pin / Output Pin */
 136 #define SCPCR_CTSC      BIT(3)  /* Serial Port CTS# Pin / Input Pin */
 137 #define SCPCR_SCKC      BIT(2)  /* Serial Port SCK Pin / Output Pin */
 138 #define SCPCR_RXDC      BIT(1)  /* Serial Port RXD Pin / Input Pin */
 139 #define SCPCR_TXDC      BIT(0)  /* Serial Port TXD Pin / Output Pin */
 140
 141 /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
 142 #define SCPDR_RTSD      BIT(4)  /* Serial Port RTS# Output Pin Data */
 143 #define SCPDR_CTSD      BIT(3)  /* Serial Port CTS# Input Pin Data */
 144 #define SCPDR_SCKD      BIT(2)  /* Serial Port SCK Output Pin Data */
 145 #define SCPDR_RXDD      BIT(1)  /* Serial Port RXD Input Pin Data */
 146 #define SCPDR_TXDD      BIT(0)  /* Serial Port TXD Output Pin Data */
 147
 148 /*
 149  * BRG Clock Select Register (Some SCIF and HSCIF)
 150  * The Baud Rate Generator for external clock can provide a clock source for
 151  * the sampling clock. It outputs either its frequency divided clock, or the
 152  * (undivided) (H)SCK external clock.
 153  */
 154 #define SCCKS_CKS       BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */
 155 #define SCCKS_XIN       BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */
 156
 157 #define SCxSR_TEND(port)        (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 158 #define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_DR | SCIF_RDF)
 159 #define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
 160 #define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
 161 #define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 162 #define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 163
 164 #define SCxSR_ERRORS(port)      (to_sci_port(port)->params->error_mask)
 165
 166 #define SCxSR_RDxF_CLEAR(port) \
 167         (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
 168 #define SCxSR_ERROR_CLEAR(port) \
 169         (to_sci_port(port)->params->error_clear)
 170 #define SCxSR_TDxE_CLEAR(port) \
 171         (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
 172 #define SCxSR_BREAK_CLEAR(port) \
 173         (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)