2 * Freecale 85xx and 86xx Global Utilties register set
5 * Timur Tabi <timur@freescale.com>
7 * Copyright 2004,2007,2012 Freescale Semiconductor, Inc
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
15 #ifndef __FSL_GUTS_H__
16 #define __FSL_GUTS_H__
18 #include <linux/types.h>
21 * Global Utility Registers.
23 * Not all registers defined in this structure are available on all chips, so
24 * you are expected to know whether a given register actually exists on your
25 * chip before you access it.
27 * Also, some registers are similar on different chips but have slightly
28 * different names. In these cases, one name is chosen to avoid extraneous
32 u32 porpllsr
; /* 0x.0000 - POR PLL Ratio Status Register */
33 u32 porbmsr
; /* 0x.0004 - POR Boot Mode Status Register */
34 u32 porimpscr
; /* 0x.0008 - POR I/O Impedance Status and
37 u32 pordevsr
; /* 0x.000c - POR I/O Device Status Register */
38 u32 pordbgmsr
; /* 0x.0010 - POR Debug Mode Status Register */
39 u32 pordevsr2
; /* 0x.0014 - POR device status register 2 */
40 u8 res018
[0x20 - 0x18];
41 u32 porcir
; /* 0x.0020 - POR Configuration Information
44 u8 res024
[0x30 - 0x24];
45 u32 gpiocr
; /* 0x.0030 - GPIO Control Register */
46 u8 res034
[0x40 - 0x34];
47 u32 gpoutdr
; /* 0x.0040 - General-Purpose Output Data
50 u8 res044
[0x50 - 0x44];
51 u32 gpindr
; /* 0x.0050 - General-Purpose Input Data
54 u8 res054
[0x60 - 0x54];
55 u32 pmuxcr
; /* 0x.0060 - Alternate Function Signal
58 u32 pmuxcr2
; /* 0x.0064 - Alternate function signal
61 u32 dmuxcr
; /* 0x.0068 - DMA Mux Control Register */
62 u8 res06c
[0x70 - 0x6c];
63 u32 devdisr
; /* 0x.0070 - Device Disable Control */
64 #define CCSR_GUTS_DEVDISR_TB1 0x00001000
65 #define CCSR_GUTS_DEVDISR_TB0 0x00004000
66 u32 devdisr2
; /* 0x.0074 - Device Disable Control 2 */
67 u8 res078
[0x7c - 0x78];
68 u32 pmjcr
; /* 0x.007c - 4 Power Management Jog Control
71 u32 powmgtcsr
; /* 0x.0080 - Power Management Status and
74 u32 pmrccr
; /* 0x.0084 - Power Management Reset Counter
75 * Configuration Register
77 u32 pmpdccr
; /* 0x.0088 - Power Management Power Down Counter
78 * Configuration Register
80 u32 pmcdr
; /* 0x.008c - 4Power management clock disable
83 u32 mcpsumr
; /* 0x.0090 - Machine Check Summary Register */
84 u32 rstrscr
; /* 0x.0094 - Reset Request Status and
87 u32 ectrstcr
; /* 0x.0098 - Exception reset control register */
88 u32 autorstsr
; /* 0x.009c - Automatic reset status register */
89 u32 pvr
; /* 0x.00a0 - Processor Version Register */
90 u32 svr
; /* 0x.00a4 - System Version Register */
91 u8 res0a8
[0xb0 - 0xa8];
92 u32 rstcr
; /* 0x.00b0 - Reset Control Register */
93 u8 res0b4
[0xc0 - 0xb4];
94 u32 iovselsr
; /* 0x.00c0 - I/O voltage select status register
95 Called 'elbcvselcr' on 86xx SOCs */
96 u8 res0c4
[0x100 - 0xc4];
97 u32 rcwsr
[16]; /* 0x.0100 - Reset Control Word Status registers
98 There are 16 registers */
99 u8 res140
[0x224 - 0x140];
100 u32 iodelay1
; /* 0x.0224 - IO delay control register 1 */
101 u32 iodelay2
; /* 0x.0228 - IO delay control register 2 */
102 u8 res22c
[0x604 - 0x22c];
103 u32 pamubypenr
; /* 0x.604 - PAMU bypass enable register */
104 u8 res608
[0x800 - 0x608];
105 u32 clkdvdr
; /* 0x.0800 - Clock Divide Register */
106 u8 res804
[0x900 - 0x804];
107 u32 ircr
; /* 0x.0900 - Infrared Control Register */
108 u8 res904
[0x908 - 0x904];
109 u32 dmacr
; /* 0x.0908 - DMA Control Register */
110 u8 res90c
[0x914 - 0x90c];
111 u32 elbccr
; /* 0x.0914 - eLBC Control Register */
112 u8 res918
[0xb20 - 0x918];
113 u32 ddr1clkdr
; /* 0x.0b20 - DDR1 Clock Disable Register */
114 u32 ddr2clkdr
; /* 0x.0b24 - DDR2 Clock Disable Register */
115 u32 ddrclkdr
; /* 0x.0b28 - DDR Clock Disable Register */
116 u8 resb2c
[0xe00 - 0xb2c];
117 u32 clkocr
; /* 0x.0e00 - Clock Out Select Register */
118 u8 rese04
[0xe10 - 0xe04];
119 u32 ddrdllcr
; /* 0x.0e10 - DDR DLL Control Register */
120 u8 rese14
[0xe20 - 0xe14];
121 u32 lbcdllcr
; /* 0x.0e20 - LBC DLL Control Register */
122 u32 cpfor
; /* 0x.0e24 - L2 charge pump fuse override
125 u8 rese28
[0xf04 - 0xe28];
126 u32 srds1cr0
; /* 0x.0f04 - SerDes1 Control Register 0 */
127 u32 srds1cr1
; /* 0x.0f08 - SerDes1 Control Register 0 */
128 u8 resf0c
[0xf2c - 0xf0c];
129 u32 itcr
; /* 0x.0f2c - Internal transaction control
132 u8 resf30
[0xf40 - 0xf30];
133 u32 srds2cr0
; /* 0x.0f40 - SerDes2 Control Register 0 */
134 u32 srds2cr1
; /* 0x.0f44 - SerDes2 Control Register 0 */
135 } __attribute__ ((packed
));
137 u32
fsl_guts_get_svr(void);
139 /* Alternate function signal multiplex control */
140 #define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
142 #ifdef CONFIG_PPC_86xx
144 #define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
145 #define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */
148 * Set the DMACR register in the GUTS
150 * The DMACR register determines the source of initiated transfers for each
151 * channel on each DMA controller. Rather than have a bunch of repetitive
152 * macros for the bit patterns, we just have a function that calculates
155 * guts: Pointer to GUTS structure
156 * co: The DMA controller (0 or 1)
157 * ch: The channel on the DMA controller (0, 1, 2, or 3)
158 * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
160 static inline void guts_set_dmacr(struct ccsr_guts __iomem
*guts
,
161 unsigned int co
, unsigned int ch
, unsigned int device
)
163 unsigned int shift
= 16 + (8 * (1 - co
) + 2 * (3 - ch
));
165 clrsetbits_be32(&guts
->dmacr
, 3 << shift
, device
<< shift
);
168 #define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000
169 #define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */
170 #define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */
171 #define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */
172 #define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */
173 #define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */
174 #define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */
175 #define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */
176 #define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */
177 #define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */
178 #define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */
179 #define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */
180 #define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008
181 #define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004
182 #define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002
183 #define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001
186 * Set the DMA external control bits in the GUTS
188 * The DMA external control bits in the PMUXCR are only meaningful for
189 * channels 0 and 3. Any other channels are ignored.
191 * guts: Pointer to GUTS structure
192 * co: The DMA controller (0 or 1)
193 * ch: The channel on the DMA controller (0, 1, 2, or 3)
194 * value: the new value for the bit (0 or 1)
196 static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem
*guts
,
197 unsigned int co
, unsigned int ch
, unsigned int value
)
199 if ((ch
== 0) || (ch
== 3)) {
200 unsigned int shift
= 2 * (co
+ 1) - (ch
& 1) - 1;
202 clrsetbits_be32(&guts
->pmuxcr
, 1 << shift
, value
<< shift
);
206 #define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000
207 #define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000
208 #define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000
209 #define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
210 #define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000
211 #define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
212 (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
213 #define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16
214 #define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000
215 #define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
216 #define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF
217 #define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
221 struct ccsr_rcpm_v1
{
223 __be32 cdozsr
; /* 0x0004 Core Doze Status Register */
225 __be32 cdozcr
; /* 0x000c Core Doze Control Register */
227 __be32 cnapsr
; /* 0x0014 Core Nap Status Register */
229 __be32 cnapcr
; /* 0x001c Core Nap Control Register */
231 __be32 cdozpsr
; /* 0x0024 Core Doze Previous Status Register */
233 __be32 cnappsr
; /* 0x002c Core Nap Previous Status Register */
235 __be32 cwaitsr
; /* 0x0034 Core Wait Status Register */
237 __be32 cwdtdsr
; /* 0x003c Core Watchdog Detect Status Register */
238 __be32 powmgtcsr
; /* 0x0040 PM Control&Status Register */
239 #define RCPM_POWMGTCSR_SLP 0x00020000
241 __be32 ippdexpcr
; /* 0x0050 IP Powerdown Exception Control Register */
243 __be32 cpmimr
; /* 0x0064 Core PM IRQ Mask Register */
245 __be32 cpmcimr
; /* 0x006c Core PM Critical IRQ Mask Register */
247 __be32 cpmmcmr
; /* 0x0074 Core PM Machine Check Mask Register */
249 __be32 cpmnmimr
; /* 0x007c Core PM NMI Mask Register */
251 __be32 ctbenr
; /* 0x0084 Core Time Base Enable Register */
253 __be32 ctbckselr
; /* 0x008c Core Time Base Clock Select Register */
255 __be32 ctbhltcr
; /* 0x0094 Core Time Base Halt Control Register */
257 __be32 cmcpmaskcr
; /* 0x00a4 Core Machine Check Mask Register */
260 struct ccsr_rcpm_v2
{
262 __be32 tph10sr0
; /* Thread PH10 Status Register */
264 __be32 tph10setr0
; /* Thread PH10 Set Control Register */
266 __be32 tph10clrr0
; /* Thread PH10 Clear Control Register */
268 __be32 tph10psr0
; /* Thread PH10 Previous Status Register */
270 __be32 twaitsr0
; /* Thread Wait Status Register */
272 __be32 pcph15sr
; /* Physical Core PH15 Status Register */
273 __be32 pcph15setr
; /* Physical Core PH15 Set Control Register */
274 __be32 pcph15clrr
; /* Physical Core PH15 Clear Control Register */
275 __be32 pcph15psr
; /* Physical Core PH15 Prev Status Register */
277 __be32 pcph20sr
; /* Physical Core PH20 Status Register */
278 __be32 pcph20setr
; /* Physical Core PH20 Set Control Register */
279 __be32 pcph20clrr
; /* Physical Core PH20 Clear Control Register */
280 __be32 pcph20psr
; /* Physical Core PH20 Prev Status Register */
281 __be32 pcpw20sr
; /* Physical Core PW20 Status Register */
283 __be32 pcph30sr
; /* Physical Core PH30 Status Register */
284 __be32 pcph30setr
; /* Physical Core PH30 Set Control Register */
285 __be32 pcph30clrr
; /* Physical Core PH30 Clear Control Register */
286 __be32 pcph30psr
; /* Physical Core PH30 Prev Status Register */
288 __be32 ippwrgatecr
; /* IP Power Gating Control Register */
290 __be32 powmgtcsr
; /* Power Management Control & Status Reg */
291 #define RCPM_POWMGTCSR_LPM20_RQ 0x00100000
292 #define RCPM_POWMGTCSR_LPM20_ST 0x00000200
293 #define RCPM_POWMGTCSR_P_LPM20_ST 0x00000100
295 __be32 ippdexpcr
[4]; /* IP Powerdown Exception Control Reg */
297 __be32 tpmimr0
; /* Thread PM Interrupt Mask Reg */
299 __be32 tpmcimr0
; /* Thread PM Crit Interrupt Mask Reg */
301 __be32 tpmmcmr0
; /* Thread PM Machine Check Interrupt Mask Reg */
303 __be32 tpmnmimr0
; /* Thread PM NMI Mask Reg */
305 __be32 tmcpmaskcr0
; /* Thread Machine Check Mask Control Reg */
306 __be32 pctbenr
; /* Physical Core Time Base Enable Reg */
307 __be32 pctbclkselr
; /* Physical Core Time Base Clock Select */
308 __be32 tbclkdivr
; /* Time Base Clock Divider Register */
310 __be32 ttbhltcr
[4]; /* Thread Time Base Halt Control Register */
311 __be32 clpcl10sr
; /* Cluster PCL10 Status Register */
312 __be32 clpcl10setr
; /* Cluster PCL30 Set Control Register */
313 __be32 clpcl10clrr
; /* Cluster PCL30 Clear Control Register */
314 __be32 clpcl10psr
; /* Cluster PCL30 Prev Status Register */
315 __be32 cddslpsetr
; /* Core Domain Deep Sleep Set Register */
316 __be32 cddslpclrr
; /* Core Domain Deep Sleep Clear Register */
317 __be32 cdpwroksetr
; /* Core Domain Power OK Set Register */
318 __be32 cdpwrokclrr
; /* Core Domain Power OK Clear Register */
319 __be32 cdpwrensr
; /* Core Domain Power Enable Status Register */
320 __be32 cddslsr
; /* Core Domain Deep Sleep Status Register */
322 __be32 dslpcntcr
[8]; /* Deep Sleep Counter Cfg Register */