Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[cris-mirror.git] / include / linux / printk.h
blobe9b603ee99532266a735555ffb784a939f18f5cf
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __KERNEL_PRINTK__
3 #define __KERNEL_PRINTK__
5 #include <stdarg.h>
6 #include <linux/init.h>
7 #include <linux/kern_levels.h>
8 #include <linux/linkage.h>
9 #include <linux/cache.h>
11 extern const char linux_banner[];
12 extern const char linux_proc_banner[];
14 #define PRINTK_MAX_SINGLE_HEADER_LEN 2
16 static inline int printk_get_level(const char *buffer)
18 if (buffer[0] == KERN_SOH_ASCII && buffer[1]) {
19 switch (buffer[1]) {
20 case '0' ... '7':
21 case 'd': /* KERN_DEFAULT */
22 case 'c': /* KERN_CONT */
23 return buffer[1];
26 return 0;
29 static inline const char *printk_skip_level(const char *buffer)
31 if (printk_get_level(buffer))
32 return buffer + 2;
34 return buffer;
37 static inline const char *printk_skip_headers(const char *buffer)
39 while (printk_get_level(buffer))
40 buffer = printk_skip_level(buffer);
42 return buffer;
45 #define CONSOLE_EXT_LOG_MAX 8192
47 /* printk's without a loglevel use this.. */
48 #define MESSAGE_LOGLEVEL_DEFAULT CONFIG_MESSAGE_LOGLEVEL_DEFAULT
50 /* We show everything that is MORE important than this.. */
51 #define CONSOLE_LOGLEVEL_SILENT 0 /* Mum's the word */
52 #define CONSOLE_LOGLEVEL_MIN 1 /* Minimum loglevel we let people use */
53 #define CONSOLE_LOGLEVEL_QUIET 4 /* Shhh ..., when booted with "quiet" */
54 #define CONSOLE_LOGLEVEL_DEBUG 10 /* issue debug messages */
55 #define CONSOLE_LOGLEVEL_MOTORMOUTH 15 /* You can't shut this one up */
58 * Default used to be hard-coded at 7, we're now allowing it to be set from
59 * kernel config.
61 #define CONSOLE_LOGLEVEL_DEFAULT CONFIG_CONSOLE_LOGLEVEL_DEFAULT
63 extern int console_printk[];
65 #define console_loglevel (console_printk[0])
66 #define default_message_loglevel (console_printk[1])
67 #define minimum_console_loglevel (console_printk[2])
68 #define default_console_loglevel (console_printk[3])
70 static inline void console_silent(void)
72 console_loglevel = CONSOLE_LOGLEVEL_SILENT;
75 static inline void console_verbose(void)
77 if (console_loglevel)
78 console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH;
81 /* strlen("ratelimit") + 1 */
82 #define DEVKMSG_STR_MAX_SIZE 10
83 extern char devkmsg_log_str[];
84 struct ctl_table;
86 struct va_format {
87 const char *fmt;
88 va_list *va;
92 * FW_BUG
93 * Add this to a message where you are sure the firmware is buggy or behaves
94 * really stupid or out of spec. Be aware that the responsible BIOS developer
95 * should be able to fix this issue or at least get a concrete idea of the
96 * problem by reading your message without the need of looking at the kernel
97 * code.
99 * Use it for definite and high priority BIOS bugs.
101 * FW_WARN
102 * Use it for not that clear (e.g. could the kernel messed up things already?)
103 * and medium priority BIOS bugs.
105 * FW_INFO
106 * Use this one if you want to tell the user or vendor about something
107 * suspicious, but generally harmless related to the firmware.
109 * Use it for information or very low priority BIOS bugs.
111 #define FW_BUG "[Firmware Bug]: "
112 #define FW_WARN "[Firmware Warn]: "
113 #define FW_INFO "[Firmware Info]: "
116 * HW_ERR
117 * Add this to a message for hardware errors, so that user can report
118 * it to hardware vendor instead of LKML or software vendor.
120 #define HW_ERR "[Hardware Error]: "
123 * DEPRECATED
124 * Add this to a message whenever you want to warn user space about the use
125 * of a deprecated aspect of an API so they can stop using it
127 #define DEPRECATED "[Deprecated]: "
130 * Dummy printk for disabled debugging statements to use whilst maintaining
131 * gcc's format checking.
133 #define no_printk(fmt, ...) \
134 ({ \
135 if (0) \
136 printk(fmt, ##__VA_ARGS__); \
137 0; \
140 #ifdef CONFIG_EARLY_PRINTK
141 extern asmlinkage __printf(1, 2)
142 void early_printk(const char *fmt, ...);
143 #else
144 static inline __printf(1, 2) __cold
145 void early_printk(const char *s, ...) { }
146 #endif
148 #ifdef CONFIG_PRINTK_NMI
149 extern void printk_nmi_enter(void);
150 extern void printk_nmi_exit(void);
151 #else
152 static inline void printk_nmi_enter(void) { }
153 static inline void printk_nmi_exit(void) { }
154 #endif /* PRINTK_NMI */
156 #ifdef CONFIG_PRINTK
157 asmlinkage __printf(5, 0)
158 int vprintk_emit(int facility, int level,
159 const char *dict, size_t dictlen,
160 const char *fmt, va_list args);
162 asmlinkage __printf(1, 0)
163 int vprintk(const char *fmt, va_list args);
165 asmlinkage __printf(5, 6) __cold
166 int printk_emit(int facility, int level,
167 const char *dict, size_t dictlen,
168 const char *fmt, ...);
170 asmlinkage __printf(1, 2) __cold
171 int printk(const char *fmt, ...);
174 * Special printk facility for scheduler/timekeeping use only, _DO_NOT_USE_ !
176 __printf(1, 2) __cold int printk_deferred(const char *fmt, ...);
179 * Please don't use printk_ratelimit(), because it shares ratelimiting state
180 * with all other unrelated printk_ratelimit() callsites. Instead use
181 * printk_ratelimited() or plain old __ratelimit().
183 extern int __printk_ratelimit(const char *func);
184 #define printk_ratelimit() __printk_ratelimit(__func__)
185 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
186 unsigned int interval_msec);
188 extern int printk_delay_msec;
189 extern int dmesg_restrict;
191 extern int
192 devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, void __user *buf,
193 size_t *lenp, loff_t *ppos);
195 extern void wake_up_klogd(void);
197 char *log_buf_addr_get(void);
198 u32 log_buf_len_get(void);
199 void log_buf_vmcoreinfo_setup(void);
200 void __init setup_log_buf(int early);
201 __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
202 void dump_stack_print_info(const char *log_lvl);
203 void show_regs_print_info(const char *log_lvl);
204 extern void printk_safe_init(void);
205 extern void printk_safe_flush(void);
206 extern void printk_safe_flush_on_panic(void);
207 #else
208 static inline __printf(1, 0)
209 int vprintk(const char *s, va_list args)
211 return 0;
213 static inline __printf(1, 2) __cold
214 int printk(const char *s, ...)
216 return 0;
218 static inline __printf(1, 2) __cold
219 int printk_deferred(const char *s, ...)
221 return 0;
223 static inline int printk_ratelimit(void)
225 return 0;
227 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
228 unsigned int interval_msec)
230 return false;
233 static inline void wake_up_klogd(void)
237 static inline char *log_buf_addr_get(void)
239 return NULL;
242 static inline u32 log_buf_len_get(void)
244 return 0;
247 static inline void log_buf_vmcoreinfo_setup(void)
251 static inline void setup_log_buf(int early)
255 static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
259 static inline void dump_stack_print_info(const char *log_lvl)
263 static inline void show_regs_print_info(const char *log_lvl)
267 static inline void printk_safe_init(void)
271 static inline void printk_safe_flush(void)
275 static inline void printk_safe_flush_on_panic(void)
278 #endif
280 extern int kptr_restrict;
282 extern asmlinkage void dump_stack(void) __cold;
284 #ifndef pr_fmt
285 #define pr_fmt(fmt) fmt
286 #endif
289 * These can be used to print at the various log levels.
290 * All of these will print unconditionally, although note that pr_debug()
291 * and other debug macros are compiled out unless either DEBUG is defined
292 * or CONFIG_DYNAMIC_DEBUG is set.
294 #define pr_emerg(fmt, ...) \
295 printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
296 #define pr_alert(fmt, ...) \
297 printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
298 #define pr_crit(fmt, ...) \
299 printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
300 #define pr_err(fmt, ...) \
301 printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
302 #define pr_warning(fmt, ...) \
303 printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
304 #define pr_warn pr_warning
305 #define pr_notice(fmt, ...) \
306 printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
307 #define pr_info(fmt, ...) \
308 printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
310 * Like KERN_CONT, pr_cont() should only be used when continuing
311 * a line with no newline ('\n') enclosed. Otherwise it defaults
312 * back to KERN_DEFAULT.
314 #define pr_cont(fmt, ...) \
315 printk(KERN_CONT fmt, ##__VA_ARGS__)
317 /* pr_devel() should produce zero code unless DEBUG is defined */
318 #ifdef DEBUG
319 #define pr_devel(fmt, ...) \
320 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
321 #else
322 #define pr_devel(fmt, ...) \
323 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
324 #endif
327 /* If you are writing a driver, please use dev_dbg instead */
328 #if defined(CONFIG_DYNAMIC_DEBUG)
329 #include <linux/dynamic_debug.h>
331 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
332 #define pr_debug(fmt, ...) \
333 dynamic_pr_debug(fmt, ##__VA_ARGS__)
334 #elif defined(DEBUG)
335 #define pr_debug(fmt, ...) \
336 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
337 #else
338 #define pr_debug(fmt, ...) \
339 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
340 #endif
343 * Print a one-time message (analogous to WARN_ONCE() et al):
346 #ifdef CONFIG_PRINTK
347 #define printk_once(fmt, ...) \
348 ({ \
349 static bool __print_once __read_mostly; \
350 bool __ret_print_once = !__print_once; \
352 if (!__print_once) { \
353 __print_once = true; \
354 printk(fmt, ##__VA_ARGS__); \
356 unlikely(__ret_print_once); \
358 #define printk_deferred_once(fmt, ...) \
359 ({ \
360 static bool __print_once __read_mostly; \
361 bool __ret_print_once = !__print_once; \
363 if (!__print_once) { \
364 __print_once = true; \
365 printk_deferred(fmt, ##__VA_ARGS__); \
367 unlikely(__ret_print_once); \
369 #else
370 #define printk_once(fmt, ...) \
371 no_printk(fmt, ##__VA_ARGS__)
372 #define printk_deferred_once(fmt, ...) \
373 no_printk(fmt, ##__VA_ARGS__)
374 #endif
376 #define pr_emerg_once(fmt, ...) \
377 printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
378 #define pr_alert_once(fmt, ...) \
379 printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
380 #define pr_crit_once(fmt, ...) \
381 printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
382 #define pr_err_once(fmt, ...) \
383 printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
384 #define pr_warn_once(fmt, ...) \
385 printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
386 #define pr_notice_once(fmt, ...) \
387 printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
388 #define pr_info_once(fmt, ...) \
389 printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
390 #define pr_cont_once(fmt, ...) \
391 printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
393 #if defined(DEBUG)
394 #define pr_devel_once(fmt, ...) \
395 printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
396 #else
397 #define pr_devel_once(fmt, ...) \
398 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
399 #endif
401 /* If you are writing a driver, please use dev_dbg instead */
402 #if defined(DEBUG)
403 #define pr_debug_once(fmt, ...) \
404 printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
405 #else
406 #define pr_debug_once(fmt, ...) \
407 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
408 #endif
411 * ratelimited messages with local ratelimit_state,
412 * no local ratelimit_state used in the !PRINTK case
414 #ifdef CONFIG_PRINTK
415 #define printk_ratelimited(fmt, ...) \
416 ({ \
417 static DEFINE_RATELIMIT_STATE(_rs, \
418 DEFAULT_RATELIMIT_INTERVAL, \
419 DEFAULT_RATELIMIT_BURST); \
421 if (__ratelimit(&_rs)) \
422 printk(fmt, ##__VA_ARGS__); \
424 #else
425 #define printk_ratelimited(fmt, ...) \
426 no_printk(fmt, ##__VA_ARGS__)
427 #endif
429 #define pr_emerg_ratelimited(fmt, ...) \
430 printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
431 #define pr_alert_ratelimited(fmt, ...) \
432 printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
433 #define pr_crit_ratelimited(fmt, ...) \
434 printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
435 #define pr_err_ratelimited(fmt, ...) \
436 printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
437 #define pr_warn_ratelimited(fmt, ...) \
438 printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
439 #define pr_notice_ratelimited(fmt, ...) \
440 printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
441 #define pr_info_ratelimited(fmt, ...) \
442 printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
443 /* no pr_cont_ratelimited, don't do that... */
445 #if defined(DEBUG)
446 #define pr_devel_ratelimited(fmt, ...) \
447 printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
448 #else
449 #define pr_devel_ratelimited(fmt, ...) \
450 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
451 #endif
453 /* If you are writing a driver, please use dev_dbg instead */
454 #if defined(CONFIG_DYNAMIC_DEBUG)
455 /* descriptor check is first to prevent flooding with "callbacks suppressed" */
456 #define pr_debug_ratelimited(fmt, ...) \
457 do { \
458 static DEFINE_RATELIMIT_STATE(_rs, \
459 DEFAULT_RATELIMIT_INTERVAL, \
460 DEFAULT_RATELIMIT_BURST); \
461 DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, pr_fmt(fmt)); \
462 if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \
463 __ratelimit(&_rs)) \
464 __dynamic_pr_debug(&descriptor, pr_fmt(fmt), ##__VA_ARGS__); \
465 } while (0)
466 #elif defined(DEBUG)
467 #define pr_debug_ratelimited(fmt, ...) \
468 printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
469 #else
470 #define pr_debug_ratelimited(fmt, ...) \
471 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
472 #endif
474 extern const struct file_operations kmsg_fops;
476 enum {
477 DUMP_PREFIX_NONE,
478 DUMP_PREFIX_ADDRESS,
479 DUMP_PREFIX_OFFSET
481 extern int hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
482 int groupsize, char *linebuf, size_t linebuflen,
483 bool ascii);
484 #ifdef CONFIG_PRINTK
485 extern void print_hex_dump(const char *level, const char *prefix_str,
486 int prefix_type, int rowsize, int groupsize,
487 const void *buf, size_t len, bool ascii);
488 #if defined(CONFIG_DYNAMIC_DEBUG)
489 #define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
490 dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
491 #else
492 extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
493 const void *buf, size_t len);
494 #endif /* defined(CONFIG_DYNAMIC_DEBUG) */
495 #else
496 static inline void print_hex_dump(const char *level, const char *prefix_str,
497 int prefix_type, int rowsize, int groupsize,
498 const void *buf, size_t len, bool ascii)
501 static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
502 const void *buf, size_t len)
506 #endif
508 #if defined(CONFIG_DYNAMIC_DEBUG)
509 #define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
510 groupsize, buf, len, ascii) \
511 dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
512 groupsize, buf, len, ascii)
513 #elif defined(DEBUG)
514 #define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
515 groupsize, buf, len, ascii) \
516 print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
517 groupsize, buf, len, ascii)
518 #else
519 static inline void print_hex_dump_debug(const char *prefix_str, int prefix_type,
520 int rowsize, int groupsize,
521 const void *buf, size_t len, bool ascii)
524 #endif
526 #endif