include/linux/wm97xx.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2
   3 /*
   4  * Register bits and API for Wolfson WM97xx series of codecs
   5  */
   6
   7 #ifndef _LINUX_WM97XX_H
   8 #define _LINUX_WM97XX_H
   9
  10 #include <sound/core.h>
  11 #include <sound/pcm.h>
  12 #include <sound/ac97_codec.h>
  13 #include <sound/initval.h>
  14 #include <linux/types.h>
  15 #include <linux/list.h>
  16 #include <linux/input.h>        /* Input device layer */
  17 #include <linux/platform_device.h>
  18
  19 /*
  20  * WM97xx variants
  21  */
  22 #define WM97xx_GENERIC                  0x0000
  23 #define WM97xx_WM1613                   0x1613
  24
  25 /*
  26  * WM97xx AC97 Touchscreen registers
  27  */
  28 #define AC97_WM97XX_DIGITISER1          0x76
  29 #define AC97_WM97XX_DIGITISER2          0x78
  30 #define AC97_WM97XX_DIGITISER_RD        0x7a
  31 #define AC97_WM9713_DIG1                0x74
  32 #define AC97_WM9713_DIG2                AC97_WM97XX_DIGITISER1
  33 #define AC97_WM9713_DIG3                AC97_WM97XX_DIGITISER2
  34
  35 /*
  36  * WM97xx register bits
  37  */
  38 #define WM97XX_POLL             0x8000  /* initiate a polling measurement */
  39 #define WM97XX_ADCSEL_X         0x1000  /* x coord measurement */
  40 #define WM97XX_ADCSEL_Y         0x2000  /* y coord measurement */
  41 #define WM97XX_ADCSEL_PRES      0x3000  /* pressure measurement */
  42 #define WM97XX_AUX_ID1          0x4000
  43 #define WM97XX_AUX_ID2          0x5000
  44 #define WM97XX_AUX_ID3          0x6000
  45 #define WM97XX_AUX_ID4          0x7000
  46 #define WM97XX_ADCSEL_MASK      0x7000  /* ADC selection mask */
  47 #define WM97XX_COO              0x0800  /* enable coordinate mode */
  48 #define WM97XX_CTC              0x0400  /* enable continuous mode */
  49 #define WM97XX_CM_RATE_93       0x0000  /* 93.75Hz continuous rate */
  50 #define WM97XX_CM_RATE_187      0x0100  /* 187.5Hz continuous rate */
  51 #define WM97XX_CM_RATE_375      0x0200  /* 375Hz continuous rate */
  52 #define WM97XX_CM_RATE_750      0x0300  /* 750Hz continuous rate */
  53 #define WM97XX_CM_RATE_8K       0x00f0  /* 8kHz continuous rate */
  54 #define WM97XX_CM_RATE_12K      0x01f0  /* 12kHz continuous rate */
  55 #define WM97XX_CM_RATE_24K      0x02f0  /* 24kHz continuous rate */
  56 #define WM97XX_CM_RATE_48K      0x03f0  /* 48kHz continuous rate */
  57 #define WM97XX_CM_RATE_MASK     0x03f0
  58 #define WM97XX_RATE(i)          (((i & 3) << 8) | ((i & 4) ? 0xf0 : 0))
  59 #define WM97XX_DELAY(i)         ((i << 4) & 0x00f0)     /* sample delay times */
  60 #define WM97XX_DELAY_MASK       0x00f0
  61 #define WM97XX_SLEN             0x0008  /* slot read back enable */
  62 #define WM97XX_SLT(i)           ((i - 5) & 0x7) /* panel slot (5-11) */
  63 #define WM97XX_SLT_MASK         0x0007
  64 #define WM97XX_PRP_DETW         0x4000  /* detect on, digitise off, wake */
  65 #define WM97XX_PRP_DET          0x8000  /* detect on, digitise off, no wake */
  66 #define WM97XX_PRP_DET_DIG      0xc000  /* setect on, digitise on */
  67 #define WM97XX_RPR              0x2000  /* wake up on pen down */
  68 #define WM97XX_PEN_DOWN         0x8000  /* pen is down */
  69
  70 /* WM9712 Bits */
  71 #define WM9712_45W              0x1000  /* set for 5-wire touchscreen */
  72 #define WM9712_PDEN             0x0800  /* measure only when pen down */
  73 #define WM9712_WAIT             0x0200  /* wait until adc is read before next sample */
  74 #define WM9712_PIL              0x0100  /* current used for pressure measurement. set 400uA else 200uA */
  75 #define WM9712_MASK_HI          0x0040  /* hi on mask pin (47) stops conversions */
  76 #define WM9712_MASK_EDGE        0x0080  /* rising/falling edge on pin delays sample */
  77 #define WM9712_MASK_SYNC        0x00c0  /* rising/falling edge on mask initiates sample */
  78 #define WM9712_RPU(i)           (i&0x3f)        /* internal pull up on pen detect (64k / rpu) */
  79 #define WM9712_PD(i)            (0x1 << i)      /* power management */
  80
  81 /* WM9712 Registers */
  82 #define AC97_WM9712_POWER       0x24
  83 #define AC97_WM9712_REV         0x58
  84
  85 /* WM9705 Bits */
  86 #define WM9705_PDEN             0x1000  /* measure only when pen is down */
  87 #define WM9705_PINV             0x0800  /* inverts sense of pen down output */
  88 #define WM9705_BSEN             0x0400  /* BUSY flag enable, pin47 is 1 when busy */
  89 #define WM9705_BINV             0x0200  /* invert BUSY (pin47) output */
  90 #define WM9705_WAIT             0x0100  /* wait until adc is read before next sample */
  91 #define WM9705_PIL              0x0080  /* current used for pressure measurement. set 400uA else 200uA */
  92 #define WM9705_PHIZ             0x0040  /* set PHONE and PCBEEP inputs to high impedance */
  93 #define WM9705_MASK_HI          0x0010  /* hi on mask stops conversions */
  94 #define WM9705_MASK_EDGE        0x0020  /* rising/falling edge on pin delays sample */
  95 #define WM9705_MASK_SYNC        0x0030  /* rising/falling edge on mask initiates sample */
  96 #define WM9705_PDD(i)           (i & 0x000f)    /* pen detect comparator threshold */
  97
  98
  99 /* WM9713 Bits */
 100 #define WM9713_PDPOL            0x0400  /* Pen down polarity */
 101 #define WM9713_POLL             0x0200  /* initiate a polling measurement */
 102 #define WM9713_CTC              0x0100  /* enable continuous mode */
 103 #define WM9713_ADCSEL_X         0x0002  /* X measurement */
 104 #define WM9713_ADCSEL_Y         0x0004  /* Y measurement */
 105 #define WM9713_ADCSEL_PRES      0x0008  /* Pressure measurement */
 106 #define WM9713_COO              0x0001  /* enable coordinate mode */
 107 #define WM9713_45W              0x1000  /* set for 5 wire panel */
 108 #define WM9713_PDEN             0x0800  /* measure only when pen down */
 109 #define WM9713_ADCSEL_MASK      0x00fe  /* ADC selection mask */
 110 #define WM9713_WAIT             0x0200  /* coordinate wait */
 111
 112 /* AUX ADC ID's */
 113 #define TS_COMP1                0x0
 114 #define TS_COMP2                0x1
 115 #define TS_BMON                 0x2
 116 #define TS_WIPER                0x3
 117
 118 /* ID numbers */
 119 #define WM97XX_ID1              0x574d
 120 #define WM9712_ID2              0x4c12
 121 #define WM9705_ID2              0x4c05
 122 #define WM9713_ID2              0x4c13
 123
 124 /* Codec GPIO's */
 125 #define WM97XX_MAX_GPIO         16
 126 #define WM97XX_GPIO_1           (1 << 1)
 127 #define WM97XX_GPIO_2           (1 << 2)
 128 #define WM97XX_GPIO_3           (1 << 3)
 129 #define WM97XX_GPIO_4           (1 << 4)
 130 #define WM97XX_GPIO_5           (1 << 5)
 131 #define WM97XX_GPIO_6           (1 << 6)
 132 #define WM97XX_GPIO_7           (1 << 7)
 133 #define WM97XX_GPIO_8           (1 << 8)
 134 #define WM97XX_GPIO_9           (1 << 9)
 135 #define WM97XX_GPIO_10          (1 << 10)
 136 #define WM97XX_GPIO_11          (1 << 11)
 137 #define WM97XX_GPIO_12          (1 << 12)
 138 #define WM97XX_GPIO_13          (1 << 13)
 139 #define WM97XX_GPIO_14          (1 << 14)
 140 #define WM97XX_GPIO_15          (1 << 15)
 141
 142
 143 #define AC97_LINK_FRAME         21      /* time in uS for AC97 link frame */
 144
 145
 146 /*---------------- Return codes from sample reading functions ---------------*/
 147
 148 /* More data is available; call the sample gathering function again */
 149 #define RC_AGAIN                        0x00000001
 150 /* The returned sample is valid */
 151 #define RC_VALID                        0x00000002
 152 /* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */
 153 #define RC_PENUP                        0x00000004
 154 /* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful
 155    to tell the handler that the pen is down but we don't know yet his coords,
 156    so the handler should not sleep or wait for pendown irq) */
 157 #define RC_PENDOWN                      0x00000008
 158
 159 /*
 160  * The wm97xx driver provides a private API for writing platform-specific
 161  * drivers.
 162  */
 163
 164 /* The structure used to return arch specific sampled data into */
 165 struct wm97xx_data {
 166     int x;
 167     int y;
 168     int p;
 169 };
 170
 171 /*
 172  * Codec GPIO status
 173  */
 174 enum wm97xx_gpio_status {
 175     WM97XX_GPIO_HIGH,
 176     WM97XX_GPIO_LOW
 177 };
 178
 179 /*
 180  * Codec GPIO direction
 181  */
 182 enum wm97xx_gpio_dir {
 183     WM97XX_GPIO_IN,
 184     WM97XX_GPIO_OUT
 185 };
 186
 187 /*
 188  * Codec GPIO polarity
 189  */
 190 enum wm97xx_gpio_pol {
 191     WM97XX_GPIO_POL_HIGH,
 192     WM97XX_GPIO_POL_LOW
 193 };
 194
 195 /*
 196  * Codec GPIO sticky
 197  */
 198 enum wm97xx_gpio_sticky {
 199     WM97XX_GPIO_STICKY,
 200     WM97XX_GPIO_NOTSTICKY
 201 };
 202
 203 /*
 204  * Codec GPIO wake
 205  */
 206 enum wm97xx_gpio_wake {
 207     WM97XX_GPIO_WAKE,
 208     WM97XX_GPIO_NOWAKE
 209 };
 210
 211 /*
 212  * Digitiser ioctl commands
 213  */
 214 #define WM97XX_DIG_START        0x1
 215 #define WM97XX_DIG_STOP         0x2
 216 #define WM97XX_PHY_INIT         0x3
 217 #define WM97XX_AUX_PREPARE      0x4
 218 #define WM97XX_DIG_RESTORE      0x5
 219
 220 struct wm97xx;
 221
 222 extern struct wm97xx_codec_drv wm9705_codec;
 223 extern struct wm97xx_codec_drv wm9712_codec;
 224 extern struct wm97xx_codec_drv wm9713_codec;
 225
 226 /*
 227  * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
 228  */
 229 struct wm97xx_codec_drv {
 230         u16 id;
 231         char *name;
 232
 233         /* read 1 sample */
 234         int (*poll_sample) (struct wm97xx *, int adcsel, int *sample);
 235
 236         /* read X,Y,[P] in poll */
 237         int (*poll_touch) (struct wm97xx *, struct wm97xx_data *);
 238
 239         int (*acc_enable) (struct wm97xx *, int enable);
 240         void (*phy_init) (struct wm97xx *);
 241         void (*dig_enable) (struct wm97xx *, int enable);
 242         void (*dig_restore) (struct wm97xx *);
 243         void (*aux_prepare) (struct wm97xx *);
 244 };
 245
 246
 247 /* Machine specific and accelerated touch operations */
 248 struct wm97xx_mach_ops {
 249
 250         /* accelerated touch readback - coords are transmited on AC97 link */
 251         int acc_enabled;
 252         void (*acc_pen_up) (struct wm97xx *);
 253         int (*acc_pen_down) (struct wm97xx *);
 254         int (*acc_startup) (struct wm97xx *);
 255         void (*acc_shutdown) (struct wm97xx *);
 256
 257         /* interrupt mask control - required for accelerated operation */
 258         void (*irq_enable) (struct wm97xx *, int enable);
 259
 260         /* GPIO pin used for accelerated operation */
 261         int irq_gpio;
 262
 263         /* pre and post sample - can be used to minimise any analog noise */
 264         void (*pre_sample) (int);  /* function to run before sampling */
 265         void (*post_sample) (int);  /* function to run after sampling */
 266 };
 267
 268 struct wm97xx {
 269         u16 dig[3], id, gpio[6], misc;  /* Cached codec registers */
 270         u16 dig_save[3];                /* saved during aux reading */
 271         struct wm97xx_codec_drv *codec; /* attached codec driver*/
 272         struct input_dev *input_dev;    /* touchscreen input device */
 273         struct snd_ac97 *ac97;          /* ALSA codec access */
 274         struct device *dev;             /* ALSA device */
 275         struct platform_device *battery_dev;
 276         struct platform_device *touch_dev;
 277         struct wm97xx_mach_ops *mach_ops;
 278         struct mutex codec_mutex;
 279         struct delayed_work ts_reader;  /* Used to poll touchscreen */
 280         unsigned long ts_reader_interval; /* Current interval for timer */
 281         unsigned long ts_reader_min_interval; /* Minimum interval */
 282         unsigned int pen_irq;           /* Pen IRQ number in use */
 283         struct workqueue_struct *ts_workq;
 284         struct work_struct pen_event_work;
 285         u16 acc_slot;                   /* AC97 slot used for acc touch data */
 286         u16 acc_rate;                   /* acc touch data rate */
 287         unsigned pen_is_down:1;         /* Pen is down */
 288         unsigned aux_waiting:1;         /* aux measurement waiting */
 289         unsigned pen_probably_down:1;   /* used in polling mode */
 290         u16 variant;                    /* WM97xx chip variant */
 291         u16 suspend_mode;               /* PRP in suspend mode */
 292 };
 293
 294 struct wm97xx_batt_pdata {
 295         int     batt_aux;
 296         int     temp_aux;
 297         int     charge_gpio;
 298         int     min_voltage;
 299         int     max_voltage;
 300         int     batt_div;
 301         int     batt_mult;
 302         int     temp_div;
 303         int     temp_mult;
 304         int     batt_tech;
 305         char    *batt_name;
 306 };
 307
 308 struct wm97xx_pdata {
 309         struct wm97xx_batt_pdata        *batt_pdata;    /* battery data */
 310 };
 311
 312 /*
 313  * Codec GPIO access (not supported on WM9705)
 314  * This can be used to set/get codec GPIO and Virtual GPIO status.
 315  */
 316 enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio);
 317 void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
 318                           enum wm97xx_gpio_status status);
 319 void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
 320                                      enum wm97xx_gpio_dir dir,
 321                                      enum wm97xx_gpio_pol pol,
 322                                      enum wm97xx_gpio_sticky sticky,
 323                                      enum wm97xx_gpio_wake wake);
 324
 325 void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode);
 326
 327 /* codec AC97 IO access */
 328 int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
 329 void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);
 330
 331 /* aux adc readback */
 332 int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel);
 333
 334 /* machine ops */
 335 int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *);
 336 void wm97xx_unregister_mach_ops(struct wm97xx *);
 337
 338 #endif