Linux 2.6.33-rc6
[cris-mirror.git] / drivers / gpu / drm / i915 / i915_gem_tiling.c
blobdf278b2685bff16c4da8b1a26eb6982149fce4e1
1 /*
2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21 * IN THE SOFTWARE.
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
28 #include <linux/acpi.h>
29 #include <linux/pnp.h>
30 #include "linux/string.h"
31 #include "linux/bitops.h"
32 #include "drmP.h"
33 #include "drm.h"
34 #include "i915_drm.h"
35 #include "i915_drv.h"
37 /** @file i915_gem_tiling.c
39 * Support for managing tiling state of buffer objects.
41 * The idea behind tiling is to increase cache hit rates by rearranging
42 * pixel data so that a group of pixel accesses are in the same cacheline.
43 * Performance improvement from doing this on the back/depth buffer are on
44 * the order of 30%.
46 * Intel architectures make this somewhat more complicated, though, by
47 * adjustments made to addressing of data when the memory is in interleaved
48 * mode (matched pairs of DIMMS) to improve memory bandwidth.
49 * For interleaved memory, the CPU sends every sequential 64 bytes
50 * to an alternate memory channel so it can get the bandwidth from both.
52 * The GPU also rearranges its accesses for increased bandwidth to interleaved
53 * memory, and it matches what the CPU does for non-tiled. However, when tiled
54 * it does it a little differently, since one walks addresses not just in the
55 * X direction but also Y. So, along with alternating channels when bit
56 * 6 of the address flips, it also alternates when other bits flip -- Bits 9
57 * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
58 * are common to both the 915 and 965-class hardware.
60 * The CPU also sometimes XORs in higher bits as well, to improve
61 * bandwidth doing strided access like we do so frequently in graphics. This
62 * is called "Channel XOR Randomization" in the MCH documentation. The result
63 * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
64 * decode.
66 * All of this bit 6 XORing has an effect on our memory management,
67 * as we need to make sure that the 3d driver can correctly address object
68 * contents.
70 * If we don't have interleaved memory, all tiling is safe and no swizzling is
71 * required.
73 * When bit 17 is XORed in, we simply refuse to tile at all. Bit
74 * 17 is not just a page offset, so as we page an objet out and back in,
75 * individual pages in it will have different bit 17 addresses, resulting in
76 * each 64 bytes being swapped with its neighbor!
78 * Otherwise, if interleaved, we have to tell the 3d driver what the address
79 * swizzling it needs to do is, since it's writing with the CPU to the pages
80 * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
81 * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
82 * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
83 * to match what the GPU expects.
86 #define MCHBAR_I915 0x44
87 #define MCHBAR_I965 0x48
88 #define MCHBAR_SIZE (4*4096)
90 #define DEVEN_REG 0x54
91 #define DEVEN_MCHBAR_EN (1 << 28)
93 /* Allocate space for the MCH regs if needed, return nonzero on error */
94 static int
95 intel_alloc_mchbar_resource(struct drm_device *dev)
97 drm_i915_private_t *dev_priv = dev->dev_private;
98 int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
99 u32 temp_lo, temp_hi = 0;
100 u64 mchbar_addr;
101 int ret = 0;
103 if (IS_I965G(dev))
104 pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
105 pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
106 mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
108 /* If ACPI doesn't have it, assume we need to allocate it ourselves */
109 #ifdef CONFIG_PNP
110 if (mchbar_addr &&
111 pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
112 ret = 0;
113 goto out;
115 #endif
117 /* Get some space for it */
118 ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, &dev_priv->mch_res,
119 MCHBAR_SIZE, MCHBAR_SIZE,
120 PCIBIOS_MIN_MEM,
121 0, pcibios_align_resource,
122 dev_priv->bridge_dev);
123 if (ret) {
124 DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
125 dev_priv->mch_res.start = 0;
126 goto out;
129 if (IS_I965G(dev))
130 pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
131 upper_32_bits(dev_priv->mch_res.start));
133 pci_write_config_dword(dev_priv->bridge_dev, reg,
134 lower_32_bits(dev_priv->mch_res.start));
135 out:
136 return ret;
139 /* Setup MCHBAR if possible, return true if we should disable it again */
140 static bool
141 intel_setup_mchbar(struct drm_device *dev)
143 drm_i915_private_t *dev_priv = dev->dev_private;
144 int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
145 u32 temp;
146 bool need_disable = false, enabled;
148 if (IS_I915G(dev) || IS_I915GM(dev)) {
149 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
150 enabled = !!(temp & DEVEN_MCHBAR_EN);
151 } else {
152 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
153 enabled = temp & 1;
156 /* If it's already enabled, don't have to do anything */
157 if (enabled)
158 goto out;
160 if (intel_alloc_mchbar_resource(dev))
161 goto out;
163 need_disable = true;
165 /* Space is allocated or reserved, so enable it. */
166 if (IS_I915G(dev) || IS_I915GM(dev)) {
167 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
168 temp | DEVEN_MCHBAR_EN);
169 } else {
170 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
171 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
173 out:
174 return need_disable;
177 static void
178 intel_teardown_mchbar(struct drm_device *dev, bool disable)
180 drm_i915_private_t *dev_priv = dev->dev_private;
181 int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
182 u32 temp;
184 if (disable) {
185 if (IS_I915G(dev) || IS_I915GM(dev)) {
186 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
187 temp &= ~DEVEN_MCHBAR_EN;
188 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
189 } else {
190 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
191 temp &= ~1;
192 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
196 if (dev_priv->mch_res.start)
197 release_resource(&dev_priv->mch_res);
201 * Detects bit 6 swizzling of address lookup between IGD access and CPU
202 * access through main memory.
204 void
205 i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
207 drm_i915_private_t *dev_priv = dev->dev_private;
208 uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
209 uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
210 bool need_disable;
212 if (IS_IRONLAKE(dev)) {
213 /* On Ironlake whatever DRAM config, GPU always do
214 * same swizzling setup.
216 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
217 swizzle_y = I915_BIT_6_SWIZZLE_9;
218 } else if (!IS_I9XX(dev)) {
219 /* As far as we know, the 865 doesn't have these bit 6
220 * swizzling issues.
222 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
223 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
224 } else if (IS_MOBILE(dev)) {
225 uint32_t dcc;
227 /* Try to make sure MCHBAR is enabled before poking at it */
228 need_disable = intel_setup_mchbar(dev);
230 /* On mobile 9xx chipsets, channel interleave by the CPU is
231 * determined by DCC. For single-channel, neither the CPU
232 * nor the GPU do swizzling. For dual channel interleaved,
233 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
234 * 9 for Y tiled. The CPU's interleave is independent, and
235 * can be based on either bit 11 (haven't seen this yet) or
236 * bit 17 (common).
238 dcc = I915_READ(DCC);
239 switch (dcc & DCC_ADDRESSING_MODE_MASK) {
240 case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
241 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
242 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
243 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
244 break;
245 case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
246 if (dcc & DCC_CHANNEL_XOR_DISABLE) {
247 /* This is the base swizzling by the GPU for
248 * tiled buffers.
250 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
251 swizzle_y = I915_BIT_6_SWIZZLE_9;
252 } else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
253 /* Bit 11 swizzling by the CPU in addition. */
254 swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
255 swizzle_y = I915_BIT_6_SWIZZLE_9_11;
256 } else {
257 /* Bit 17 swizzling by the CPU in addition. */
258 swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
259 swizzle_y = I915_BIT_6_SWIZZLE_9_17;
261 break;
263 if (dcc == 0xffffffff) {
264 DRM_ERROR("Couldn't read from MCHBAR. "
265 "Disabling tiling.\n");
266 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
267 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
270 intel_teardown_mchbar(dev, need_disable);
271 } else {
272 /* The 965, G33, and newer, have a very flexible memory
273 * configuration. It will enable dual-channel mode
274 * (interleaving) on as much memory as it can, and the GPU
275 * will additionally sometimes enable different bit 6
276 * swizzling for tiled objects from the CPU.
278 * Here's what I found on the G965:
279 * slot fill memory size swizzling
280 * 0A 0B 1A 1B 1-ch 2-ch
281 * 512 0 0 0 512 0 O
282 * 512 0 512 0 16 1008 X
283 * 512 0 0 512 16 1008 X
284 * 0 512 0 512 16 1008 X
285 * 1024 1024 1024 0 2048 1024 O
287 * We could probably detect this based on either the DRB
288 * matching, which was the case for the swizzling required in
289 * the table above, or from the 1-ch value being less than
290 * the minimum size of a rank.
292 if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
293 swizzle_x = I915_BIT_6_SWIZZLE_NONE;
294 swizzle_y = I915_BIT_6_SWIZZLE_NONE;
295 } else {
296 swizzle_x = I915_BIT_6_SWIZZLE_9_10;
297 swizzle_y = I915_BIT_6_SWIZZLE_9;
301 dev_priv->mm.bit_6_swizzle_x = swizzle_x;
302 dev_priv->mm.bit_6_swizzle_y = swizzle_y;
307 * Returns whether an object is currently fenceable. If not, it may need
308 * to be unbound and have its pitch adjusted.
310 bool
311 i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
313 struct drm_i915_gem_object *obj_priv = obj->driver_private;
315 if (IS_I965G(dev)) {
316 /* The 965 can have fences at any page boundary. */
317 if (obj->size & 4095)
318 return false;
319 return true;
320 } else if (IS_I9XX(dev)) {
321 if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
322 return false;
323 } else {
324 if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
325 return false;
328 /* Power of two sized... */
329 if (obj->size & (obj->size - 1))
330 return false;
332 /* Objects must be size aligned as well */
333 if (obj_priv->gtt_offset & (obj->size - 1))
334 return false;
335 return true;
338 /* Check pitch constriants for all chips & tiling formats */
339 bool
340 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
342 int tile_width;
344 /* Linear is always fine */
345 if (tiling_mode == I915_TILING_NONE)
346 return true;
348 if (!IS_I9XX(dev) ||
349 (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
350 tile_width = 128;
351 else
352 tile_width = 512;
354 /* check maximum stride & object size */
355 if (IS_I965G(dev)) {
356 /* i965 stores the end address of the gtt mapping in the fence
357 * reg, so dont bother to check the size */
358 if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
359 return false;
360 } else if (IS_I9XX(dev)) {
361 uint32_t pitch_val = ffs(stride / tile_width) - 1;
363 /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
364 * instead of 4 (2KB) on 945s.
366 if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
367 size > (I830_FENCE_MAX_SIZE_VAL << 20))
368 return false;
369 } else {
370 uint32_t pitch_val = ffs(stride / tile_width) - 1;
372 if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
373 size > (I830_FENCE_MAX_SIZE_VAL << 19))
374 return false;
377 /* 965+ just needs multiples of tile width */
378 if (IS_I965G(dev)) {
379 if (stride & (tile_width - 1))
380 return false;
381 return true;
384 /* Pre-965 needs power of two tile widths */
385 if (stride < tile_width)
386 return false;
388 if (stride & (stride - 1))
389 return false;
391 return true;
394 static bool
395 i915_gem_object_fence_offset_ok(struct drm_gem_object *obj, int tiling_mode)
397 struct drm_device *dev = obj->dev;
398 struct drm_i915_gem_object *obj_priv = obj->driver_private;
400 if (obj_priv->gtt_space == NULL)
401 return true;
403 if (tiling_mode == I915_TILING_NONE)
404 return true;
406 if (!IS_I965G(dev)) {
407 if (obj_priv->gtt_offset & (obj->size - 1))
408 return false;
409 if (IS_I9XX(dev)) {
410 if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
411 return false;
412 } else {
413 if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
414 return false;
418 return true;
422 * Sets the tiling mode of an object, returning the required swizzling of
423 * bit 6 of addresses in the object.
426 i915_gem_set_tiling(struct drm_device *dev, void *data,
427 struct drm_file *file_priv)
429 struct drm_i915_gem_set_tiling *args = data;
430 drm_i915_private_t *dev_priv = dev->dev_private;
431 struct drm_gem_object *obj;
432 struct drm_i915_gem_object *obj_priv;
433 int ret = 0;
435 obj = drm_gem_object_lookup(dev, file_priv, args->handle);
436 if (obj == NULL)
437 return -EINVAL;
438 obj_priv = obj->driver_private;
440 if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
441 mutex_lock(&dev->struct_mutex);
442 drm_gem_object_unreference(obj);
443 mutex_unlock(&dev->struct_mutex);
444 return -EINVAL;
447 if (args->tiling_mode == I915_TILING_NONE) {
448 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
449 args->stride = 0;
450 } else {
451 if (args->tiling_mode == I915_TILING_X)
452 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
453 else
454 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
456 /* Hide bit 17 swizzling from the user. This prevents old Mesa
457 * from aborting the application on sw fallbacks to bit 17,
458 * and we use the pread/pwrite bit17 paths to swizzle for it.
459 * If there was a user that was relying on the swizzle
460 * information for drm_intel_bo_map()ed reads/writes this would
461 * break it, but we don't have any of those.
463 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
464 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
465 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
466 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
468 /* If we can't handle the swizzling, make it untiled. */
469 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
470 args->tiling_mode = I915_TILING_NONE;
471 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
472 args->stride = 0;
476 mutex_lock(&dev->struct_mutex);
477 if (args->tiling_mode != obj_priv->tiling_mode ||
478 args->stride != obj_priv->stride) {
479 /* We need to rebind the object if its current allocation
480 * no longer meets the alignment restrictions for its new
481 * tiling mode. Otherwise we can just leave it alone, but
482 * need to ensure that any fence register is cleared.
484 if (!i915_gem_object_fence_offset_ok(obj, args->tiling_mode))
485 ret = i915_gem_object_unbind(obj);
486 else
487 ret = i915_gem_object_put_fence_reg(obj);
488 if (ret != 0) {
489 WARN(ret != -ERESTARTSYS,
490 "failed to reset object for tiling switch");
491 args->tiling_mode = obj_priv->tiling_mode;
492 args->stride = obj_priv->stride;
493 goto err;
496 /* If we've changed tiling, GTT-mappings of the object
497 * need to re-fault to ensure that the correct fence register
498 * setup is in place.
500 i915_gem_release_mmap(obj);
502 obj_priv->tiling_mode = args->tiling_mode;
503 obj_priv->stride = args->stride;
505 err:
506 drm_gem_object_unreference(obj);
507 mutex_unlock(&dev->struct_mutex);
509 return ret;
513 * Returns the current tiling mode and required bit 6 swizzling for the object.
516 i915_gem_get_tiling(struct drm_device *dev, void *data,
517 struct drm_file *file_priv)
519 struct drm_i915_gem_get_tiling *args = data;
520 drm_i915_private_t *dev_priv = dev->dev_private;
521 struct drm_gem_object *obj;
522 struct drm_i915_gem_object *obj_priv;
524 obj = drm_gem_object_lookup(dev, file_priv, args->handle);
525 if (obj == NULL)
526 return -EINVAL;
527 obj_priv = obj->driver_private;
529 mutex_lock(&dev->struct_mutex);
531 args->tiling_mode = obj_priv->tiling_mode;
532 switch (obj_priv->tiling_mode) {
533 case I915_TILING_X:
534 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
535 break;
536 case I915_TILING_Y:
537 args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
538 break;
539 case I915_TILING_NONE:
540 args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
541 break;
542 default:
543 DRM_ERROR("unknown tiling mode\n");
546 /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
547 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
548 args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
549 if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
550 args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
552 drm_gem_object_unreference(obj);
553 mutex_unlock(&dev->struct_mutex);
555 return 0;
559 * Swap every 64 bytes of this page around, to account for it having a new
560 * bit 17 of its physical address and therefore being interpreted differently
561 * by the GPU.
563 static int
564 i915_gem_swizzle_page(struct page *page)
566 char *vaddr;
567 int i;
568 char temp[64];
570 vaddr = kmap(page);
571 if (vaddr == NULL)
572 return -ENOMEM;
574 for (i = 0; i < PAGE_SIZE; i += 128) {
575 memcpy(temp, &vaddr[i], 64);
576 memcpy(&vaddr[i], &vaddr[i + 64], 64);
577 memcpy(&vaddr[i + 64], temp, 64);
580 kunmap(page);
582 return 0;
585 void
586 i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
588 struct drm_device *dev = obj->dev;
589 drm_i915_private_t *dev_priv = dev->dev_private;
590 struct drm_i915_gem_object *obj_priv = obj->driver_private;
591 int page_count = obj->size >> PAGE_SHIFT;
592 int i;
594 if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
595 return;
597 if (obj_priv->bit_17 == NULL)
598 return;
600 for (i = 0; i < page_count; i++) {
601 char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
602 if ((new_bit_17 & 0x1) !=
603 (test_bit(i, obj_priv->bit_17) != 0)) {
604 int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
605 if (ret != 0) {
606 DRM_ERROR("Failed to swizzle page\n");
607 return;
609 set_page_dirty(obj_priv->pages[i]);
614 void
615 i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
617 struct drm_device *dev = obj->dev;
618 drm_i915_private_t *dev_priv = dev->dev_private;
619 struct drm_i915_gem_object *obj_priv = obj->driver_private;
620 int page_count = obj->size >> PAGE_SHIFT;
621 int i;
623 if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
624 return;
626 if (obj_priv->bit_17 == NULL) {
627 obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
628 sizeof(long), GFP_KERNEL);
629 if (obj_priv->bit_17 == NULL) {
630 DRM_ERROR("Failed to allocate memory for bit 17 "
631 "record\n");
632 return;
636 for (i = 0; i < page_count; i++) {
637 if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
638 __set_bit(i, obj_priv->bit_17);
639 else
640 __clear_bit(i, obj_priv->bit_17);