1 I2C for R-Car platforms
5 "renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
6 "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
7 "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
8 "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
9 "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
10 "renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
11 "renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
12 "renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
13 "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
14 "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
15 "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
16 "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
17 "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
18 "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
20 "renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device.
21 "renesas,i2c-rcar" (deprecated)
23 When compatible with the generic version, nodes must list the
24 SoC-specific version corresponding to the platform first followed
25 by the generic version.
27 - reg: physical base address of the controller and length of memory mapped
29 - interrupts: interrupt specifier.
32 - clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
33 property indicates the default frequency 100 kHz.
34 - clocks: clock specifier.
35 - dmas: Must contain a list of two references to DMA specifiers, one for
36 transmission, and one for reception.
37 - dma-names: Must contain a list of two DMA names, "tx" and "rx".
39 - i2c-scl-falling-time-ns: see i2c.txt
40 - i2c-scl-internal-delay-ns: see i2c.txt
41 - i2c-scl-rising-time-ns: see i2c.txt
48 compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
49 reg = <0 0xe6508000 0 0x40>;
50 interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
51 clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
52 clock-frequency = <400000>;