Documentation/devicetree/bindings/phy/berlin-sata-phy.txt

   1 Berlin SATA PHY
   2 ---------------
   3
   4 Required properties:
   5 - compatible: should be one of
   6     "marvell,berlin2-sata-phy"
   7     "marvell,berlin2q-sata-phy"
   8 - address-cells: should be 1
   9 - size-cells: should be 0
  10 - phy-cells: from the generic PHY bindings, must be 1
  11 - reg: address and length of the register
  12 - clocks: reference to the clock entry
  13
  14 Sub-nodes:
  15 Each PHY should be represented as a sub-node.
  16
  17 Sub-nodes required properties:
  18 - reg: the PHY number
  19
  20 Example:
  21         sata_phy: phy@f7e900a0 {
  22                 compatible = "marvell,berlin2q-sata-phy";
  23                 reg = <0xf7e900a0 0x200>;
  24                 clocks = <&chip CLKID_SATA>;
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 #phy-cells = <1>;
  28
  29                 sata-phy@0 {
  30                         reg = <0>;
  31                 };
  32
  33                 sata-phy@1 {
  34                         reg = <1>;
  35                 };
  36         };