Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[cris-mirror.git] / drivers / gpu / drm / arm / malidp_hw.h
blobb0690ebb356523781bfaf5a6fbbb4a38d39cb5e2
1 /*
3 * (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
5 * This program is free software and is provided to you under the terms of the
6 * GNU General Public License version 2 as published by the Free Software
7 * Foundation, and any use by you of this program is subject to the terms
8 * of such GNU licence.
10 * ARM Mali DP hardware manipulation routines.
13 #ifndef __MALIDP_HW_H__
14 #define __MALIDP_HW_H__
16 #include <linux/bitops.h>
17 #include "malidp_regs.h"
19 struct videomode;
20 struct clk;
22 /* Mali DP IP blocks */
23 enum {
24 MALIDP_DE_BLOCK = 0,
25 MALIDP_SE_BLOCK,
26 MALIDP_DC_BLOCK
29 /* Mali DP layer IDs */
30 enum {
31 DE_VIDEO1 = BIT(0),
32 DE_GRAPHICS1 = BIT(1),
33 DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
34 DE_VIDEO2 = BIT(3),
35 DE_SMART = BIT(4),
38 struct malidp_format_id {
39 u32 format; /* DRM fourcc */
40 u8 layer; /* bitmask of layers supporting it */
41 u8 id; /* used internally */
44 #define MALIDP_INVALID_FORMAT_ID 0xff
47 * hide the differences between register maps
48 * by using a common structure to hold the
49 * base register offsets
52 struct malidp_irq_map {
53 u32 irq_mask; /* mask of IRQs that can be enabled in the block */
54 u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */
57 struct malidp_layer {
58 u16 id; /* layer ID */
59 u16 base; /* address offset for the register bank */
60 u16 ptr; /* address offset for the pointer register */
61 u16 stride_offset; /* Offset to the first stride register. */
64 enum malidp_scaling_coeff_set {
65 MALIDP_UPSCALING_COEFFS = 1,
66 MALIDP_DOWNSCALING_1_5_COEFFS = 2,
67 MALIDP_DOWNSCALING_2_COEFFS = 3,
68 MALIDP_DOWNSCALING_2_75_COEFFS = 4,
69 MALIDP_DOWNSCALING_4_COEFFS = 5,
72 struct malidp_se_config {
73 u8 scale_enable : 1;
74 u8 enhancer_enable : 1;
75 u8 hcoeff : 3;
76 u8 vcoeff : 3;
77 u8 plane_src_id;
78 u16 input_w, input_h;
79 u16 output_w, output_h;
80 u32 h_init_phase, h_delta_phase;
81 u32 v_init_phase, v_delta_phase;
84 /* regmap features */
85 #define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0)
87 struct malidp_hw_regmap {
88 /* address offset of the DE register bank */
89 /* is always 0x0000 */
90 /* address offset of the DE coefficients registers */
91 const u16 coeffs_base;
92 /* address offset of the SE registers bank */
93 const u16 se_base;
94 /* address offset of the DC registers bank */
95 const u16 dc_base;
97 /* address offset for the output depth register */
98 const u16 out_depth_base;
100 /* bitmap with register map features */
101 const u8 features;
103 /* list of supported layers */
104 const u8 n_layers;
105 const struct malidp_layer *layers;
107 const struct malidp_irq_map de_irq_map;
108 const struct malidp_irq_map se_irq_map;
109 const struct malidp_irq_map dc_irq_map;
111 /* list of supported pixel formats for each layer */
112 const struct malidp_format_id *pixel_formats;
113 const u8 n_pixel_formats;
115 /* pitch alignment requirement in bytes */
116 const u8 bus_align_bytes;
119 /* device features */
120 /* Unlike DP550/650, DP500 has 3 stride registers in its video layer. */
121 #define MALIDP_DEVICE_LV_HAS_3_STRIDES BIT(0)
123 struct malidp_hw_device;
126 * Static structure containing hardware specific data and pointers to
127 * functions that behave differently between various versions of the IP.
129 struct malidp_hw {
130 const struct malidp_hw_regmap map;
133 * Validate the driver instance against the hardware bits
135 int (*query_hw)(struct malidp_hw_device *hwdev);
138 * Set the hardware into config mode, ready to accept mode changes
140 void (*enter_config_mode)(struct malidp_hw_device *hwdev);
143 * Tell hardware to exit configuration mode
145 void (*leave_config_mode)(struct malidp_hw_device *hwdev);
148 * Query if hardware is in configuration mode
150 bool (*in_config_mode)(struct malidp_hw_device *hwdev);
153 * Set configuration valid flag for hardware parameters that can
154 * be changed outside the configuration mode. Hardware will use
155 * the new settings when config valid is set after the end of the
156 * current buffer scanout
158 void (*set_config_valid)(struct malidp_hw_device *hwdev);
161 * Set a new mode in hardware. Requires the hardware to be in
162 * configuration mode before this function is called.
164 void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
167 * Calculate the required rotation memory given the active area
168 * and the buffer format.
170 int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
172 int (*se_set_scaling_coeffs)(struct malidp_hw_device *hwdev,
173 struct malidp_se_config *se_config,
174 struct malidp_se_config *old_config);
176 long (*se_calc_mclk)(struct malidp_hw_device *hwdev,
177 struct malidp_se_config *se_config,
178 struct videomode *vm);
180 u8 features;
183 /* Supported variants of the hardware */
184 enum {
185 MALIDP_500 = 0,
186 MALIDP_550,
187 MALIDP_650,
188 /* keep the next entry last */
189 MALIDP_MAX_DEVICES
192 extern const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES];
195 * Structure used by the driver during runtime operation.
197 struct malidp_hw_device {
198 struct malidp_hw *hw;
199 void __iomem *regs;
201 /* APB clock */
202 struct clk *pclk;
203 /* AXI clock */
204 struct clk *aclk;
205 /* main clock for display core */
206 struct clk *mclk;
207 /* pixel clock for display core */
208 struct clk *pxlclk;
210 u8 min_line_size;
211 u16 max_line_size;
213 /* track the device PM state */
214 bool pm_suspended;
216 /* size of memory used for rotating layers, up to two banks available */
217 u32 rotation_memory[2];
220 static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
222 WARN_ON(hwdev->pm_suspended);
223 return readl(hwdev->regs + reg);
226 static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
227 u32 value, u32 reg)
229 WARN_ON(hwdev->pm_suspended);
230 writel(value, hwdev->regs + reg);
233 static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
234 u32 mask, u32 reg)
236 u32 data = malidp_hw_read(hwdev, reg);
238 data |= mask;
239 malidp_hw_write(hwdev, data, reg);
242 static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
243 u32 mask, u32 reg)
245 u32 data = malidp_hw_read(hwdev, reg);
247 data &= ~mask;
248 malidp_hw_write(hwdev, data, reg);
251 static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
252 u8 block)
254 switch (block) {
255 case MALIDP_SE_BLOCK:
256 return hwdev->hw->map.se_base;
257 case MALIDP_DC_BLOCK:
258 return hwdev->hw->map.dc_base;
261 return 0;
264 static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
265 u8 block, u32 irq)
267 u32 base = malidp_get_block_base(hwdev, block);
269 malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
272 static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
273 u8 block, u32 irq)
275 u32 base = malidp_get_block_base(hwdev, block);
277 malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
280 int malidp_de_irq_init(struct drm_device *drm, int irq);
281 void malidp_de_irq_fini(struct drm_device *drm);
282 int malidp_se_irq_init(struct drm_device *drm, int irq);
283 void malidp_se_irq_fini(struct drm_device *drm);
285 u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
286 u8 layer_id, u32 format);
288 static inline bool malidp_hw_pitch_valid(struct malidp_hw_device *hwdev,
289 unsigned int pitch)
291 return !(pitch & (hwdev->hw->map.bus_align_bytes - 1));
294 /* U16.16 */
295 #define FP_1_00000 0x00010000 /* 1.0 */
296 #define FP_0_66667 0x0000AAAA /* 0.6667 = 1/1.5 */
297 #define FP_0_50000 0x00008000 /* 0.5 = 1/2 */
298 #define FP_0_36363 0x00005D17 /* 0.36363 = 1/2.75 */
299 #define FP_0_25000 0x00004000 /* 0.25 = 1/4 */
301 static inline enum malidp_scaling_coeff_set
302 malidp_se_select_coeffs(u32 upscale_factor)
304 return (upscale_factor >= FP_1_00000) ? MALIDP_UPSCALING_COEFFS :
305 (upscale_factor >= FP_0_66667) ? MALIDP_DOWNSCALING_1_5_COEFFS :
306 (upscale_factor >= FP_0_50000) ? MALIDP_DOWNSCALING_2_COEFFS :
307 (upscale_factor >= FP_0_36363) ? MALIDP_DOWNSCALING_2_75_COEFFS :
308 MALIDP_DOWNSCALING_4_COEFFS;
311 #undef FP_0_25000
312 #undef FP_0_36363
313 #undef FP_0_50000
314 #undef FP_0_66667
315 #undef FP_1_00000
317 static inline void malidp_se_set_enh_coeffs(struct malidp_hw_device *hwdev)
319 static const s32 enhancer_coeffs[] = {
320 -8, -8, -8, -8, 128, -8, -8, -8, -8
322 u32 val = MALIDP_SE_SET_ENH_LIMIT_LOW(MALIDP_SE_ENH_LOW_LEVEL) |
323 MALIDP_SE_SET_ENH_LIMIT_HIGH(MALIDP_SE_ENH_HIGH_LEVEL);
324 u32 image_enh = hwdev->hw->map.se_base +
325 ((hwdev->hw->map.features & MALIDP_REGMAP_HAS_CLEARIRQ) ?
326 0x10 : 0xC) + MALIDP_SE_IMAGE_ENH;
327 u32 enh_coeffs = image_enh + MALIDP_SE_ENH_COEFF0;
328 int i;
330 malidp_hw_write(hwdev, val, image_enh);
331 for (i = 0; i < ARRAY_SIZE(enhancer_coeffs); ++i)
332 malidp_hw_write(hwdev, enhancer_coeffs[i], enh_coeffs + i * 4);
336 * background color components are defined as 12bits values,
337 * they will be shifted right when stored on hardware that
338 * supports only 8bits per channel
340 #define MALIDP_BGND_COLOR_R 0x000
341 #define MALIDP_BGND_COLOR_G 0x000
342 #define MALIDP_BGND_COLOR_B 0x000
344 #define MALIDP_COLORADJ_NUM_COEFFS 12
345 #define MALIDP_COEFFTAB_NUM_COEFFS 64
347 #define MALIDP_GAMMA_LUT_SIZE 4096
349 #endif /* __MALIDP_HW_H__ */