drivers/char/ec3104_keyb.c

   1 /*
   2  * linux/drivers/char/ec3104_keyb.c
   3  *
   4  * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
   5  *
   6  * based on linux/drivers/char/pc_keyb.c, which had the following comments:
   7  *
   8  * Separation of the PC low-level part by Geert Uytterhoeven, May 1997
   9  * See keyboard.c for the whole history.
  10  *
  11  * Major cleanup by Martin Mares, May 1997
  12  *
  13  * Combined the keyboard and PS/2 mouse handling into one file,
  14  * because they share the same hardware.
  15  * Johan Myreen <jem@iki.fi> 1998-10-08.
  16  *
  17  * Code fixes to handle mouse ACKs properly.
  18  * C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
  19  */
  20 /* EC3104 note:
  21  * This code was written without any documentation about the EC3104 chip.  While
  22  * I hope I got most of the basic functionality right, the register names I use
  23  * are most likely completely different from those in the chip documentation.
  24  *
  25  * If you have any further information about the EC3104, please tell me
  26  * (prumpf@tux.org).
  27  */
  28
  29 #include <linux/config.h>
  30
  31 #include <linux/spinlock.h>
  32 #include <linux/sched.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/tty.h>
  35 #include <linux/mm.h>
  36 #include <linux/signal.h>
  37 #include <linux/init.h>
  38 #include <linux/kbd_ll.h>
  39 #include <linux/delay.h>
  40 #include <linux/random.h>
  41 #include <linux/poll.h>
  42 #include <linux/miscdevice.h>
  43 #include <linux/slab.h>
  44 #include <linux/kbd_kern.h>
  45 #include <linux/smp_lock.h>
  46 #include <linux/bitops.h>
  47
  48 #include <asm/keyboard.h>
  49 #include <asm/uaccess.h>
  50 #include <asm/irq.h>
  51 #include <asm/system.h>
  52 #include <asm/ec3104.h>
  53
  54 #include <asm/io.h>
  55
  56 /* Some configuration switches are present in the include file... */
  57
  58 #include <linux/pc_keyb.h>
  59
  60 #define MSR_CTS 0x10
  61 #define MCR_RTS 0x02
  62 #define LSR_DR 0x01
  63 #define LSR_BOTH_EMPTY 0x60
  64
  65 static struct e5_struct {
  66         u8 packet[8];
  67         int pos;
  68         int length;
  69
  70         u8 cached_mcr;
  71         u8 last_msr;
  72 } ec3104_keyb;
  73
  74 /* Simple translation table for the SysRq keys */
  75
  76
  77 #ifdef CONFIG_MAGIC_SYSRQ
  78 unsigned char ec3104_kbd_sysrq_xlate[128] =
  79         "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
  80         "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
  81         "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
  82         "bnm,./\000*\000 \000\201\202\203\204\205"      /* 0x30 - 0x3f */
  83         "\206\207\210\211\212\000\000789-456+1"         /* 0x40 - 0x4f */
  84         "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
  85         "\r\000/";                                      /* 0x60 - 0x6f */
  86 #endif
  87
  88 static void kbd_write_command_w(int data);
  89 static void kbd_write_output_w(int data);
  90 #ifdef CONFIG_PSMOUSE
  91 static void aux_write_ack(int val);
  92 static void __aux_write_ack(int val);
  93 #endif
  94
  95 static DEFINE_SPINLOCK(kbd_controller_lock);
  96 static unsigned char handle_kbd_event(void);
  97
  98 /* used only by send_data - set by keyboard_interrupt */
  99 static volatile unsigned char reply_expected;
 100 static volatile unsigned char acknowledge;
 101 static volatile unsigned char resend;
 102
 103
 104 int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
 105 {
 106         return 0;
 107 }
 108
 109 int ec3104_kbd_getkeycode(unsigned int scancode)
 110 {
 111         return 0;
 112 }
 113
 114
 115 /* yes, it probably would be faster to use an array.  I don't care. */
 116
 117 static inline unsigned char ec3104_scan2key(unsigned char scancode)
 118 {
 119         switch (scancode) {
 120         case  1: /* '`' */
 121                 return 41;
 122
 123         case  2 ... 27:
 124                 return scancode;
 125
 126         case 28: /* '\\' */
 127                 return 43;
 128
 129         case 29 ... 39:
 130                 return scancode + 1;
 131
 132         case 40: /* '\r' */
 133                 return 28;
 134
 135         case 41 ... 50:
 136                 return scancode + 3;
 137
 138         case 51: /* ' ' */
 139                 return 57;
 140
 141         case 52: /* escape */
 142                 return 1;
 143
 144         case 54: /* insert/delete (labelled delete) */
 145                 /* this should arguably be 110, but I'd like to have ctrl-alt-del
 146                  * working with a standard keymap */
 147                 return 111;
 148
 149         case 55: /* left */
 150                 return 105;
 151         case 56: /* home */
 152                 return 102;
 153         case 57: /* end */
 154                 return 107;
 155         case 58: /* up */
 156                 return 103;
 157         case 59: /* down */
 158                 return 108;
 159         case 60: /* pgup */
 160                 return 104;
 161         case 61: /* pgdown */
 162                 return 109;
 163         case 62: /* right */
 164                 return 106;
 165
 166         case 79 ... 88: /* f1 - f10 */
 167                 return scancode - 20;
 168
 169         case 89 ... 90: /* f11 - f12 */
 170                 return scancode - 2;
 171
 172         case 91: /* left shift */
 173                 return 42;
 174
 175         case 92: /* right shift */
 176                 return 54;
 177
 178         case 93: /* left alt */
 179                 return 56;
 180         case 94: /* right alt */
 181                 return 100;
 182         case 95: /* left ctrl */
 183                 return 29;
 184         case 96: /* right ctrl */
 185                 return 97;
 186
 187         case 97: /* caps lock */
 188                 return 58;
 189         case 102: /* left windows */
 190                 return 125;
 191         case 103: /* right windows */
 192                 return 126;
 193
 194         case 106: /* Fn */
 195                 /* this is wrong. */
 196                 return 84;
 197
 198         default:
 199                 return 0;
 200         }
 201 }
 202
 203 int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
 204                     char raw_mode)
 205 {
 206         scancode &= 0x7f;
 207
 208         *keycode = ec3104_scan2key(scancode);
 209
 210         return 1;
 211 }
 212
 213 char ec3104_kbd_unexpected_up(unsigned char keycode)
 214 {
 215         return 0200;
 216 }
 217
 218 static inline void handle_keyboard_event(unsigned char scancode)
 219 {
 220 #ifdef CONFIG_VT
 221         handle_scancode(scancode, !(scancode & 0x80));
 222 #endif
 223         tasklet_schedule(&keyboard_tasklet);
 224 }
 225
 226 void ec3104_kbd_leds(unsigned char leds)
 227 {
 228 }
 229
 230 static u8 e5_checksum(u8 *packet, int count)
 231 {
 232         int i;
 233         u8 sum = 0;
 234
 235         for (i=0; i<count; i++)
 236                 sum ^= packet[i];
 237
 238         if (sum & 0x80)
 239                 sum ^= 0xc0;
 240
 241         return sum;
 242 }
 243
 244 static void e5_wait_for_cts(struct e5_struct *k)
 245 {
 246         u8 msr;
 247
 248         do {
 249                 msr = ctrl_inb(EC3104_SER4_MSR);
 250         } while (!(msr & MSR_CTS));
 251 }
 252
 253
 254 static void e5_send_byte(u8 byte, struct e5_struct *k)
 255 {
 256         u8 status;
 257
 258         do {
 259                 status = ctrl_inb(EC3104_SER4_LSR);
 260         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 261
 262         printk("<%02x>", byte);
 263
 264         ctrl_outb(byte, EC3104_SER4_DATA);
 265
 266         do {
 267                 status = ctrl_inb(EC3104_SER4_LSR);
 268         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 269
 270 }
 271
 272 static int e5_send_packet(u8 *packet, int count, struct e5_struct *k)
 273 {
 274         int i;
 275
 276         disable_irq(EC3104_IRQ_SER4);
 277
 278         if (k->cached_mcr & MCR_RTS) {
 279                 printk("e5_send_packet: too slow\n");
 280                 enable_irq(EC3104_IRQ_SER4);
 281                 return -EAGAIN;
 282         }
 283
 284         k->cached_mcr |= MCR_RTS;
 285         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 286
 287         e5_wait_for_cts(k);
 288
 289         printk("p: ");
 290
 291         for(i=0; i<count; i++)
 292                 e5_send_byte(packet[i], k);
 293
 294         e5_send_byte(e5_checksum(packet, count), k);
 295
 296         printk("\n");
 297
 298         udelay(1500);
 299
 300         k->cached_mcr &= ~MCR_RTS;
 301         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 302
 303         set_current_state(TASK_UNINTERRUPTIBLE);
 304
 305
 306
 307         enable_irq(EC3104_IRQ_SER4);
 308
 309
 310
 311         return 0;
 312 }
 313
 314 /*
 315  * E5 packets we know about:
 316  * E5->host 0x80 0x05 <checksum> - resend packet
 317  * host->E5 0x83 0x43 <contrast> - set LCD contrast
 318  * host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
 319  * E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2
 320  * E5->host 0x88 <scancode> <checksum> - key press
 321  */
 322
 323 static void e5_receive(struct e5_struct *k)
 324 {
 325         k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);
 326
 327         if (k->pos == 1) {
 328                 switch(k->packet[0]) {
 329                 case 0x80:
 330                         k->length = 3;
 331                         break;
 332
 333                 case 0x87: /* PS2 ext */
 334                         k->length = 6;
 335                         break;
 336
 337                 case 0x88: /* keyboard */
 338                         k->length = 3;
 339                         break;
 340
 341                 default:
 342                         k->length = 1;
 343                         printk(KERN_WARNING "unknown E5 packet %02x\n",
 344                                k->packet[0]);
 345                 }
 346         }
 347
 348         if (k->pos == k->length) {
 349                 int i;
 350
 351                 if (e5_checksum(k->packet, k->length) != 0)
 352                         printk(KERN_WARNING "E5: wrong checksum\n");
 353
 354 #if 0
 355                 printk("E5 packet [");
 356                 for(i=0; i<k->length; i++) {
 357                         printk("%02x ", k->packet[i]);
 358                 }
 359
 360                 printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
 361 #endif
 362
 363                 switch(k->packet[0]) {
 364                 case 0x80:
 365                 case 0x88:
 366                         handle_keyboard_event(k->packet[1]);
 367                         break;
 368                 }
 369
 370                 k->pos = k->length = 0;
 371         }
 372 }
 373
 374 static void ec3104_keyb_interrupt(int irq, void *data, struct pt_regs *regs)
 375 {
 376         struct e5_struct *k = &ec3104_keyb;
 377         u8 msr, lsr;
 378
 379         msr = ctrl_inb(EC3104_SER4_MSR);
 380
 381         if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 382                 if (k->cached_mcr & MCR_RTS)
 383                         printk("confused: RTS already high\n");
 384                 /* CTS went high.  Send RTS. */
 385                 k->cached_mcr |= MCR_RTS;
 386
 387                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 388         } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 389                 /* CTS went low. */
 390                 if (!(k->cached_mcr & MCR_RTS))
 391                         printk("confused: RTS already low\n");
 392
 393                 k->cached_mcr &= ~MCR_RTS;
 394
 395                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 396         }
 397
 398         k->last_msr = msr;
 399
 400         lsr = ctrl_inb(EC3104_SER4_LSR);
 401
 402         if (lsr & LSR_DR)
 403                 e5_receive(k);
 404 }
 405
 406 static void ec3104_keyb_clear_state(void)
 407 {
 408         struct e5_struct *k = &ec3104_keyb;
 409         u8 msr, lsr;
 410
 411         /* we want CTS to be low */
 412         k->last_msr = 0;
 413
 414         for (;;) {
 415                 msleep(100);
 416
 417                 msr = ctrl_inb(EC3104_SER4_MSR);
 418
 419                 lsr = ctrl_inb(EC3104_SER4_LSR);
 420
 421                 if (lsr & LSR_DR) {
 422                         e5_receive(k);
 423                         continue;
 424                 }
 425
 426                 if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 427                         if (k->cached_mcr & MCR_RTS)
 428                                 printk("confused: RTS already high\n");
 429                         /* CTS went high.  Send RTS. */
 430                         k->cached_mcr |= MCR_RTS;
 431
 432                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 433                 } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 434                         /* CTS went low. */
 435                         if (!(k->cached_mcr & MCR_RTS))
 436                                 printk("confused: RTS already low\n");
 437
 438                         k->cached_mcr &= ~MCR_RTS;
 439
 440                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 441                 } else
 442                         break;
 443
 444                 k->last_msr = msr;
 445
 446                 continue;
 447         }
 448 }
 449
 450 void __init ec3104_kbd_init_hw(void)
 451 {
 452         ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
 453         ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);
 454
 455         ec3104_keyb_clear_state();
 456
 457         /* Ok, finally allocate the IRQ, and off we go.. */
 458         request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
 459 }