[PATCH] aic7xxx_osm build fix
[cris-mirror.git] / drivers / isdn / hisax / st5481.h
blobe8177b017b1d7184f998177efd4706db7d91b6b0
1 /*
2 * Driver for ST5481 USB ISDN modem
4 * Author Frode Isaksen
5 * Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
6 * 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
7 *
8 * This software may be used and distributed according to the terms
9 * of the GNU General Public License, incorporated herein by reference.
13 #ifndef _ST5481_H_
14 #define _ST5481_H_
16 #include <linux/config.h>
18 // USB IDs, the Product Id is in the range 0x4810-0x481F
20 #define ST_VENDOR_ID 0x0483
21 #define ST5481_PRODUCT_ID 0x4810
22 #define ST5481_PRODUCT_ID_MASK 0xFFF0
24 // ST5481 endpoints when using alternative setting 3 (2B+D).
25 // To get the endpoint address, OR with 0x80 for IN endpoints.
27 #define EP_CTRL 0x00U /* Control endpoint */
28 #define EP_INT 0x01U /* Interrupt endpoint */
29 #define EP_B1_OUT 0x02U /* B1 channel out */
30 #define EP_B1_IN 0x03U /* B1 channel in */
31 #define EP_B2_OUT 0x04U /* B2 channel out */
32 #define EP_B2_IN 0x05U /* B2 channel in */
33 #define EP_D_OUT 0x06U /* D channel out */
34 #define EP_D_IN 0x07U /* D channel in */
36 // Number of isochronous packets. With 20 packets we get
37 // 50 interrupts/sec for each endpoint.
39 #define NUM_ISO_PACKETS_D 20
40 #define NUM_ISO_PACKETS_B 20
42 // Size of each isochronous packet.
43 // In outgoing direction we need to match ISDN data rates:
44 // D: 2 bytes / msec -> 16 kbit / s
45 // B: 16 bytes / msec -> 64 kbit / s
46 #define SIZE_ISO_PACKETS_D_IN 16
47 #define SIZE_ISO_PACKETS_D_OUT 2
48 #define SIZE_ISO_PACKETS_B_IN 32
49 #define SIZE_ISO_PACKETS_B_OUT 8
51 // If we overrun/underrun, we send one packet with +/- 2 bytes
52 #define B_FLOW_ADJUST 2
54 // Registers that are written using vendor specific device request
55 // on endpoint 0.
57 #define LBA 0x02 /* S loopback */
58 #define SET_DEFAULT 0x06 /* Soft reset */
59 #define LBB 0x1D /* S maintenance loopback */
60 #define STT 0x1e /* S force transmission signals */
61 #define SDA_MIN 0x20 /* SDA-sin minimal value */
62 #define SDA_MAX 0x21 /* SDA-sin maximal value */
63 #define SDELAY_VALUE 0x22 /* Delay between Tx and Rx clock */
64 #define IN_D_COUNTER 0x36 /* D receive channel fifo counter */
65 #define OUT_D_COUNTER 0x37 /* D transmit channel fifo counter */
66 #define IN_B1_COUNTER 0x38 /* B1 receive channel fifo counter */
67 #define OUT_B1_COUNTER 0x39 /* B1 transmit channel fifo counter */
68 #define IN_B2_COUNTER 0x3a /* B2 receive channel fifo counter */
69 #define OUT_B2_COUNTER 0x3b /* B2 transmit channel fifo counter */
70 #define FFCTRL_IN_D 0x3C /* D receive channel fifo threshold low */
71 #define FFCTRH_IN_D 0x3D /* D receive channel fifo threshold high */
72 #define FFCTRL_OUT_D 0x3E /* D transmit channel fifo threshold low */
73 #define FFCTRH_OUT_D 0x3F /* D transmit channel fifo threshold high */
74 #define FFCTRL_IN_B1 0x40 /* B1 receive channel fifo threshold low */
75 #define FFCTRH_IN_B1 0x41 /* B1 receive channel fifo threshold high */
76 #define FFCTRL_OUT_B1 0x42 /* B1 transmit channel fifo threshold low */
77 #define FFCTRH_OUT_B1 0x43 /* B1 transmit channel fifo threshold high */
78 #define FFCTRL_IN_B2 0x44 /* B2 receive channel fifo threshold low */
79 #define FFCTRH_IN_B2 0x45 /* B2 receive channel fifo threshold high */
80 #define FFCTRL_OUT_B2 0x46 /* B2 transmit channel fifo threshold low */
81 #define FFCTRH_OUT_B2 0x47 /* B2 transmit channel fifo threshold high */
82 #define MPMSK 0x4A /* Multi purpose interrupt MASK register */
83 #define FFMSK_D 0x4c /* D fifo interrupt MASK register */
84 #define FFMSK_B1 0x4e /* B1 fifo interrupt MASK register */
85 #define FFMSK_B2 0x50 /* B2 fifo interrupt MASK register */
86 #define GPIO_DIR 0x52 /* GPIO pins direction registers */
87 #define GPIO_OUT 0x53 /* GPIO pins output register */
88 #define GPIO_IN 0x54 /* GPIO pins input register */
89 #define TXCI 0x56 /* CI command to be transmitted */
92 // Format of the interrupt packet received on endpoint 1:
94 // +--------+--------+--------+--------+--------+--------+
95 // !MPINT !FFINT_D !FFINT_B1!FFINT_B2!CCIST !GPIO_INT!
96 // +--------+--------+--------+--------+--------+--------+
98 // Offsets in the interrupt packet
100 #define MPINT 0
101 #define FFINT_D 1
102 #define FFINT_B1 2
103 #define FFINT_B2 3
104 #define CCIST 4
105 #define GPIO_INT 5
106 #define INT_PKT_SIZE 6
108 // MPINT
109 #define LSD_INT 0x80 /* S line activity detected */
110 #define RXCI_INT 0x40 /* Indicate primitive arrived */
111 #define DEN_INT 0x20 /* Signal enabling data out of D Tx fifo */
112 #define DCOLL_INT 0x10 /* D channel collision */
113 #define AMIVN_INT 0x04 /* AMI violation number reached 2 */
114 #define INFOI_INT 0x04 /* INFOi changed */
115 #define DRXON_INT 0x02 /* Reception channel active */
116 #define GPCHG_INT 0x01 /* GPIO pin value changed */
118 // FFINT_x
119 #define IN_OVERRUN 0x80 /* In fifo overrun */
120 #define OUT_UNDERRUN 0x40 /* Out fifo underrun */
121 #define IN_UP 0x20 /* In fifo thresholdh up-crossed */
122 #define IN_DOWN 0x10 /* In fifo thresholdl down-crossed */
123 #define OUT_UP 0x08 /* Out fifo thresholdh up-crossed */
124 #define OUT_DOWN 0x04 /* Out fifo thresholdl down-crossed */
125 #define IN_COUNTER_ZEROED 0x02 /* In down-counter reached 0 */
126 #define OUT_COUNTER_ZEROED 0x01 /* Out down-counter reached 0 */
128 #define ANY_REC_INT (IN_OVERRUN+IN_UP+IN_DOWN+IN_COUNTER_ZEROED)
129 #define ANY_XMIT_INT (OUT_UNDERRUN+OUT_UP+OUT_DOWN+OUT_COUNTER_ZEROED)
132 // Level 1 commands that are sent using the TXCI device request
133 #define ST5481_CMD_DR 0x0 /* Deactivation Request */
134 #define ST5481_CMD_RES 0x1 /* state machine RESet */
135 #define ST5481_CMD_TM1 0x2 /* Test Mode 1 */
136 #define ST5481_CMD_TM2 0x3 /* Test Mode 2 */
137 #define ST5481_CMD_PUP 0x7 /* Power UP */
138 #define ST5481_CMD_AR8 0x8 /* Activation Request class 1 */
139 #define ST5481_CMD_AR10 0x9 /* Activation Request class 2 */
140 #define ST5481_CMD_ARL 0xA /* Activation Request Loopback */
141 #define ST5481_CMD_PDN 0xF /* Power DoWn */
143 // Turn on/off the LEDs using the GPIO device request.
144 // To use the B LEDs, number_of_leds must be set to 4
145 #define B1_LED 0x10U
146 #define B2_LED 0x20U
147 #define GREEN_LED 0x40U
148 #define RED_LED 0x80U
150 // D channel out states
151 enum {
152 ST_DOUT_NONE,
154 ST_DOUT_SHORT_INIT,
155 ST_DOUT_SHORT_WAIT_DEN,
157 ST_DOUT_LONG_INIT,
158 ST_DOUT_LONG_WAIT_DEN,
159 ST_DOUT_NORMAL,
161 ST_DOUT_WAIT_FOR_UNDERRUN,
162 ST_DOUT_WAIT_FOR_NOT_BUSY,
163 ST_DOUT_WAIT_FOR_STOP,
164 ST_DOUT_WAIT_FOR_RESET,
167 #define DOUT_STATE_COUNT (ST_DOUT_WAIT_FOR_RESET + 1)
169 // D channel out events
170 enum {
171 EV_DOUT_START_XMIT,
172 EV_DOUT_COMPLETE,
173 EV_DOUT_DEN,
174 EV_DOUT_RESETED,
175 EV_DOUT_STOPPED,
176 EV_DOUT_COLL,
177 EV_DOUT_UNDERRUN,
180 #define DOUT_EVENT_COUNT (EV_DOUT_UNDERRUN + 1)
182 // ----------------------------------------------------------------------
184 enum {
185 ST_L1_F3,
186 ST_L1_F4,
187 ST_L1_F6,
188 ST_L1_F7,
189 ST_L1_F8,
192 #define L1_STATE_COUNT (ST_L1_F8+1)
194 // The first 16 entries match the Level 1 indications that
195 // are found at offset 4 (CCIST) in the interrupt packet
197 enum {
198 EV_IND_DP, // 0000 Deactivation Pending
199 EV_IND_1, // 0001
200 EV_IND_2, // 0010
201 EV_IND_3, // 0011
202 EV_IND_RSY, // 0100 ReSYnchronizing
203 EV_IND_5, // 0101
204 EV_IND_6, // 0110
205 EV_IND_7, // 0111
206 EV_IND_AP, // 1000 Activation Pending
207 EV_IND_9, // 1001
208 EV_IND_10, // 1010
209 EV_IND_11, // 1011
210 EV_IND_AI8, // 1100 Activation Indication class 8
211 EV_IND_AI10,// 1101 Activation Indication class 10
212 EV_IND_AIL, // 1110 Activation Indication Loopback
213 EV_IND_DI, // 1111 Deactivation Indication
214 EV_PH_ACTIVATE_REQ,
215 EV_PH_DEACTIVATE_REQ,
216 EV_TIMER3,
219 #define L1_EVENT_COUNT (EV_TIMER3 + 1)
221 #define ERR(format, arg...) \
222 printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __FUNCTION__ , ## arg)
224 #define WARN(format, arg...) \
225 printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__, __FUNCTION__ , ## arg)
227 #define INFO(format, arg...) \
228 printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __FUNCTION__ , ## arg)
230 #include "isdnhdlc.h"
231 #include "fsm.h"
232 #include "hisax_if.h"
233 #include <linux/skbuff.h>
235 /* ======================================================================
236 * FIFO handling
239 /* Generic FIFO structure */
240 struct fifo {
241 u_char r,w,count,size;
242 spinlock_t lock;
246 * Init an FIFO
248 static inline void fifo_init(struct fifo *fifo, int size)
250 fifo->r = fifo->w = fifo->count = 0;
251 fifo->size = size;
252 spin_lock_init(&fifo->lock);
256 * Add an entry to the FIFO
258 static inline int fifo_add(struct fifo *fifo)
260 unsigned long flags;
261 int index;
263 if (!fifo) {
264 return -1;
267 spin_lock_irqsave(&fifo->lock, flags);
268 if (fifo->count == fifo->size) {
269 // FIFO full
270 index = -1;
271 } else {
272 // Return index where to get the next data to add to the FIFO
273 index = fifo->w++ & (fifo->size-1);
274 fifo->count++;
276 spin_unlock_irqrestore(&fifo->lock, flags);
277 return index;
281 * Remove an entry from the FIFO with the index returned.
283 static inline int fifo_remove(struct fifo *fifo)
285 unsigned long flags;
286 int index;
288 if (!fifo) {
289 return -1;
292 spin_lock_irqsave(&fifo->lock, flags);
293 if (!fifo->count) {
294 // FIFO empty
295 index = -1;
296 } else {
297 // Return index where to get the next data from the FIFO
298 index = fifo->r++ & (fifo->size-1);
299 fifo->count--;
301 spin_unlock_irqrestore(&fifo->lock, flags);
303 return index;
306 /* ======================================================================
307 * control pipe
309 typedef void (*ctrl_complete_t)(void *);
311 typedef struct ctrl_msg {
312 struct usb_ctrlrequest dr;
313 ctrl_complete_t complete;
314 void *context;
315 } ctrl_msg;
317 /* FIFO of ctrl messages waiting to be sent */
318 #define MAX_EP0_MSG 16
319 struct ctrl_msg_fifo {
320 struct fifo f;
321 struct ctrl_msg data[MAX_EP0_MSG];
324 #define MAX_DFRAME_LEN_L1 300
325 #define HSCX_BUFMAX 4096
327 struct st5481_ctrl {
328 struct ctrl_msg_fifo msg_fifo;
329 unsigned long busy;
330 struct urb *urb;
333 struct st5481_intr {
334 // struct evt_fifo evt_fifo;
335 struct urb *urb;
338 struct st5481_d_out {
339 struct isdnhdlc_vars hdlc_state;
340 struct urb *urb[2]; /* double buffering */
341 unsigned long busy;
342 struct sk_buff *tx_skb;
343 struct FsmInst fsm;
346 struct st5481_b_out {
347 struct isdnhdlc_vars hdlc_state;
348 struct urb *urb[2]; /* double buffering */
349 u_char flow_event;
350 u_long busy;
351 struct sk_buff *tx_skb;
354 struct st5481_in {
355 struct isdnhdlc_vars hdlc_state;
356 struct urb *urb[2]; /* double buffering */
357 int mode;
358 int bufsize;
359 unsigned int num_packets;
360 unsigned int packet_size;
361 unsigned char ep, counter;
362 unsigned char *rcvbuf;
363 struct st5481_adapter *adapter;
364 struct hisax_if *hisax_if;
367 int st5481_setup_in(struct st5481_in *in);
368 void st5481_release_in(struct st5481_in *in);
369 void st5481_in_mode(struct st5481_in *in, int mode);
371 struct st5481_bcs {
372 struct hisax_b_if b_if;
373 struct st5481_adapter *adapter;
374 struct st5481_in b_in;
375 struct st5481_b_out b_out;
376 int channel;
377 int mode;
380 struct st5481_adapter {
381 struct list_head list;
382 int number_of_leds;
383 struct usb_device *usb_dev;
384 struct hisax_d_if hisax_d_if;
386 struct st5481_ctrl ctrl;
387 struct st5481_intr intr;
388 struct st5481_in d_in;
389 struct st5481_d_out d_out;
391 unsigned char leds;
392 unsigned int led_counter;
394 unsigned long event;
396 struct FsmInst l1m;
397 struct FsmTimer timer;
399 struct st5481_bcs bcs[2];
402 #define TIMER3_VALUE 7000
404 /* ======================================================================
409 * Submit an URB with error reporting. This is a macro so
410 * the __FUNCTION__ returns the caller function name.
412 #define SUBMIT_URB(urb, mem_flags) \
413 ({ \
414 int status; \
415 if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
416 WARN("usb_submit_urb failed,status=%d", status); \
418 status; \
422 * USB double buffering, return the URB index (0 or 1).
424 static inline int get_buf_nr(struct urb *urbs[], struct urb *urb)
426 return (urbs[0]==urb ? 0 : 1);
429 /* ---------------------------------------------------------------------- */
431 /* B Channel */
433 int st5481_setup_b(struct st5481_bcs *bcs);
434 void st5481_release_b(struct st5481_bcs *bcs);
435 void st5481_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg);
437 /* D Channel */
439 int st5481_setup_d(struct st5481_adapter *adapter);
440 void st5481_release_d(struct st5481_adapter *adapter);
441 void st5481_b_l2l1(struct hisax_if *b_if, int pr, void *arg);
442 int st5481_d_init(void);
443 void st5481_d_exit(void);
445 /* USB */
446 void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command);
447 int st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev,
448 unsigned int pipe, int num_packets,
449 int packet_size, int buf_size,
450 usb_complete_t complete, void *context);
451 void st5481_release_isocpipes(struct urb* urb[2]);
453 int st5481_isoc_flatten(struct urb *urb);
454 void st5481_usb_pipe_reset(struct st5481_adapter *adapter,
455 u_char pipe, ctrl_complete_t complete, void *context);
456 void st5481_usb_ctrl_msg(struct st5481_adapter *adapter,
457 u8 request, u8 requesttype, u16 value, u16 index,
458 ctrl_complete_t complete, void *context);
459 void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter,
460 u8 request, u16 value,
461 ctrl_complete_t complete, void *context);
462 int st5481_setup_usb(struct st5481_adapter *adapter);
463 void st5481_release_usb(struct st5481_adapter *adapter);
464 void st5481_start(struct st5481_adapter *adapter);
465 void st5481_stop(struct st5481_adapter *adapter);
467 // ----------------------------------------------------------------------
468 // debugging macros
470 #define __debug_variable st5481_debug
471 #include "hisax_debug.h"
473 #ifdef CONFIG_HISAX_DEBUG
475 extern int st5481_debug;
477 #define DBG_ISO_PACKET(level,urb) \
478 if (level & __debug_variable) dump_iso_packet(__FUNCTION__,urb)
480 static void __attribute__((unused))
481 dump_iso_packet(const char *name, struct urb *urb)
483 int i,j;
484 int len,ofs;
485 u_char *data;
487 printk(KERN_DEBUG "%s: packets=%d,errors=%d\n",
488 name,urb->number_of_packets,urb->error_count);
489 for (i = 0; i < urb->number_of_packets; ++i) {
490 if (urb->pipe & USB_DIR_IN) {
491 len = urb->iso_frame_desc[i].actual_length;
492 } else {
493 len = urb->iso_frame_desc[i].length;
495 ofs = urb->iso_frame_desc[i].offset;
496 printk(KERN_DEBUG "len=%.2d,ofs=%.3d ",len,ofs);
497 if (len) {
498 data = urb->transfer_buffer+ofs;
499 for (j=0; j < len; j++) {
500 printk ("%.2x", data[j]);
503 printk("\n");
507 static inline const char *ST5481_CMD_string(int evt)
509 static char s[16];
511 switch (evt) {
512 case ST5481_CMD_DR: return "DR";
513 case ST5481_CMD_RES: return "RES";
514 case ST5481_CMD_TM1: return "TM1";
515 case ST5481_CMD_TM2: return "TM2";
516 case ST5481_CMD_PUP: return "PUP";
517 case ST5481_CMD_AR8: return "AR8";
518 case ST5481_CMD_AR10: return "AR10";
519 case ST5481_CMD_ARL: return "ARL";
520 case ST5481_CMD_PDN: return "PDN";
523 sprintf(s,"0x%x",evt);
524 return s;
527 #else
529 #define DBG_ISO_PACKET(level,urb) do {} while (0)
531 #endif
535 #endif