drivers/net/irda/ma600-sir.c

   1 /*********************************************************************
   2  *
   3  * Filename:      ma600.c
   4  * Version:       0.1
   5  * Description:   Implementation of the MA600 dongle
   6  * Status:        Experimental.
   7  * Author:        Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
   8  * Created at:    Sat Jun 10 20:02:35 2000
   9  * Modified at:   Sat Aug 16 09:34:13 2003
  10  * Modified by:   Martin Diehl <mad@mdiehl.de> (modified for new sir_dev)
  11  *
  12  * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
  13  *       information on the MA600 dongle
  14  *
  15  *     Copyright (c) 2000 Leung, All Rights Reserved.
  16  *
  17  *     This program is free software; you can redistribute it and/or
  18  *     modify it under the terms of the GNU General Public License as
  19  *     published by the Free Software Foundation; either version 2 of
  20  *     the License, or (at your option) any later version.
  21  *
  22  *     This program is distributed in the hope that it will be useful,
  23  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  24  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  25  *     GNU General Public License for more details.
  26  *
  27  *     You should have received a copy of the GNU General Public License
  28  *     along with this program; if not, write to the Free Software
  29  *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  30  *     MA 02111-1307 USA
  31  *
  32  ********************************************************************/
  33
  34 #include <linux/module.h>
  35 #include <linux/delay.h>
  36 #include <linux/init.h>
  37 #include <linux/sched.h>
  38
  39 #include <net/irda/irda.h>
  40
  41 #include "sir-dev.h"
  42
  43 static int ma600_open(struct sir_dev *);
  44 static int ma600_close(struct sir_dev *);
  45 static int ma600_change_speed(struct sir_dev *, unsigned);
  46 static int ma600_reset(struct sir_dev *);
  47
  48 /* control byte for MA600 */
  49 #define MA600_9600      0x00
  50 #define MA600_19200     0x01
  51 #define MA600_38400     0x02
  52 #define MA600_57600     0x03
  53 #define MA600_115200    0x04
  54 #define MA600_DEV_ID1   0x05
  55 #define MA600_DEV_ID2   0x06
  56 #define MA600_2400      0x08
  57
  58 static struct dongle_driver ma600 = {
  59         .owner          = THIS_MODULE,
  60         .driver_name    = "MA600",
  61         .type           = IRDA_MA600_DONGLE,
  62         .open           = ma600_open,
  63         .close          = ma600_close,
  64         .reset          = ma600_reset,
  65         .set_speed      = ma600_change_speed,
  66 };
  67
  68
  69 static int __init ma600_sir_init(void)
  70 {
  71         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
  72         return irda_register_dongle(&ma600);
  73 }
  74
  75 static void __exit ma600_sir_cleanup(void)
  76 {
  77         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
  78         irda_unregister_dongle(&ma600);
  79 }
  80
  81 /*
  82         Power on:
  83                 (0) Clear RTS and DTR for 1 second
  84                 (1) Set RTS and DTR for 1 second
  85                 (2) 9600 bps now
  86         Note: assume RTS, DTR are clear before
  87 */
  88 static int ma600_open(struct sir_dev *dev)
  89 {
  90         struct qos_info *qos = &dev->qos;
  91
  92         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
  93
  94         sirdev_set_dtr_rts(dev, TRUE, TRUE);
  95
  96         /* Explicitly set the speeds we can accept */
  97         qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
  98                                 |IR_57600|IR_115200;
  99         /* Hm, 0x01 means 10ms - for >= 1ms we would need 0x07 */
 100         qos->min_turn_time.bits = 0x01;         /* Needs at least 1 ms */
 101         irda_qos_bits_to_value(qos);
 102
 103         /* irda thread waits 50 msec for power settling */
 104
 105         return 0;
 106 }
 107
 108 static int ma600_close(struct sir_dev *dev)
 109 {
 110         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
 111
 112         /* Power off dongle */
 113         sirdev_set_dtr_rts(dev, FALSE, FALSE);
 114
 115         return 0;
 116 }
 117
 118 static __u8 get_control_byte(__u32 speed)
 119 {
 120         __u8 byte;
 121
 122         switch (speed) {
 123         default:
 124         case 115200:
 125                 byte = MA600_115200;
 126                 break;
 127         case 57600:
 128                 byte = MA600_57600;
 129                 break;
 130         case 38400:
 131                 byte = MA600_38400;
 132                 break;
 133         case 19200:
 134                 byte = MA600_19200;
 135                 break;
 136         case 9600:
 137                 byte = MA600_9600;
 138                 break;
 139         case 2400:
 140                 byte = MA600_2400;
 141                 break;
 142         }
 143
 144         return byte;
 145 }
 146
 147 /*
 148  * Function ma600_change_speed (dev, speed)
 149  *
 150  *    Set the speed for the MA600 type dongle.
 151  *
 152  *    The dongle has already been reset to a known state (dongle default)
 153  *    We cycle through speeds by pulsing RTS low and then high.
 154  */
 155
 156 /*
 157  * Function ma600_change_speed (dev, speed)
 158  *
 159  *    Set the speed for the MA600 type dongle.
 160  *
 161  *    Algorithm
 162  *    1. Reset (already done by irda thread state machine)
 163  *    2. clear RTS, set DTR and wait for 1ms
 164  *    3. send Control Byte to the MA600 through TXD to set new baud rate
 165  *       wait until the stop bit of Control Byte is sent (for 9600 baud rate,
 166  *       it takes about 10 msec)
 167  *    4. set RTS, set DTR (return to NORMAL Operation)
 168  *    5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
 169  *       after
 170  */
 171
 172 /* total delays are only about 20ms - let's just sleep for now to
 173  * avoid the state machine complexity before we get things working
 174  */
 175
 176 static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
 177 {
 178         u8      byte;
 179
 180         IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
 181                 speed, dev->speed);
 182
 183         /* dongle already reset, dongle and port at default speed (9600) */
 184
 185         /* Set RTS low for 1 ms */
 186         sirdev_set_dtr_rts(dev, TRUE, FALSE);
 187         mdelay(1);
 188
 189         /* Write control byte */
 190         byte = get_control_byte(speed);
 191         sirdev_raw_write(dev, &byte, sizeof(byte));
 192
 193         /* Wait at least 10ms: fake wait_until_sent - 10 bits at 9600 baud*/
 194         msleep(15);                                     /* old ma600 uses 15ms */
 195
 196 #if 1
 197         /* read-back of the control byte. ma600 is the first dongle driver
 198          * which uses this so there might be some unidentified issues.
 199          * Disable this in case of problems with readback.
 200          */
 201
 202         sirdev_raw_read(dev, &byte, sizeof(byte));
 203         if (byte != get_control_byte(speed))  {
 204                 IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
 205                              __FUNCTION__, (unsigned) byte,
 206                              (unsigned) get_control_byte(speed));
 207                 return -1;
 208         }
 209         else
 210                 IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
 211 #endif
 212
 213         /* Set DTR, Set RTS */
 214         sirdev_set_dtr_rts(dev, TRUE, TRUE);
 215
 216         /* Wait at least 10ms */
 217         msleep(10);
 218
 219         /* dongle is now switched to the new speed */
 220         dev->speed = speed;
 221
 222         return 0;
 223 }
 224
 225 /*
 226  * Function ma600_reset (dev)
 227  *
 228  *      This function resets the ma600 dongle.
 229  *
 230  *      Algorithm:
 231  *        0. DTR=0, RTS=1 and wait 10 ms
 232  *        1. DTR=1, RTS=1 and wait 10 ms
 233  *        2. 9600 bps now
 234  */
 235
 236 /* total delays are only about 20ms - let's just sleep for now to
 237  * avoid the state machine complexity before we get things working
 238  */
 239
 240 int ma600_reset(struct sir_dev *dev)
 241 {
 242         IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
 243
 244         /* Reset the dongle : set DTR low for 10 ms */
 245         sirdev_set_dtr_rts(dev, FALSE, TRUE);
 246         msleep(10);
 247
 248         /* Go back to normal mode */
 249         sirdev_set_dtr_rts(dev, TRUE, TRUE);
 250         msleep(10);
 251
 252         dev->speed = 9600;      /* That's the dongle-default */
 253
 254         return 0;
 255 }
 256
 257 MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
 258 MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
 259 MODULE_LICENSE("GPL");
 260 MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
 261
 262 module_init(ma600_sir_init);
 263 module_exit(ma600_sir_cleanup);
 264