2 * PPP async serial channel driver for Linux.
4 * Copyright 1999 Paul Mackerras.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * This driver provides the encapsulation and framing for sending
12 * and receiving PPP frames over async serial lines. It relies on
13 * the generic PPP layer to give it frames to send and to process
14 * received frames. It implements the PPP line discipline.
16 * Part of the code in this driver was inspired by the old async-only
17 * PPP driver, written by Michael Callahan and Al Longyear, and
18 * subsequently hacked by Paul Mackerras.
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/skbuff.h>
24 #include <linux/tty.h>
25 #include <linux/netdevice.h>
26 #include <linux/poll.h>
27 #include <linux/crc-ccitt.h>
28 #include <linux/ppp_defs.h>
29 #include <linux/if_ppp.h>
30 #include <linux/ppp_channel.h>
31 #include <linux/spinlock.h>
32 #include <linux/init.h>
33 #include <asm/uaccess.h>
35 #define PPP_VERSION "2.4.2"
39 /* Structure for storing local state. */
41 struct tty_struct
*tty
;
48 unsigned long xmit_flags
;
51 unsigned int bytes_sent
;
52 unsigned int bytes_rcvd
;
59 unsigned long last_xmit
;
63 struct sk_buff_head rqueue
;
65 struct tasklet_struct tsk
;
68 struct semaphore dead_sem
;
69 struct ppp_channel chan
; /* interface to generic ppp layer */
70 unsigned char obuf
[OBUFSIZE
];
73 /* Bit numbers in xmit_flags */
81 #define SC_PREV_ERROR 4
84 #define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
86 static int flag_time
= HZ
;
87 module_param(flag_time
, int, 0);
88 MODULE_PARM_DESC(flag_time
, "ppp_async: interval between flagged packets (in clock ticks)");
89 MODULE_LICENSE("GPL");
90 MODULE_ALIAS_LDISC(N_PPP
);
95 static int ppp_async_encode(struct asyncppp
*ap
);
96 static int ppp_async_send(struct ppp_channel
*chan
, struct sk_buff
*skb
);
97 static int ppp_async_push(struct asyncppp
*ap
);
98 static void ppp_async_flush_output(struct asyncppp
*ap
);
99 static void ppp_async_input(struct asyncppp
*ap
, const unsigned char *buf
,
100 char *flags
, int count
);
101 static int ppp_async_ioctl(struct ppp_channel
*chan
, unsigned int cmd
,
103 static void ppp_async_process(unsigned long arg
);
105 static void async_lcp_peek(struct asyncppp
*ap
, unsigned char *data
,
106 int len
, int inbound
);
108 static struct ppp_channel_ops async_ops
= {
114 * Routines implementing the PPP line discipline.
118 * We have a potential race on dereferencing tty->disc_data,
119 * because the tty layer provides no locking at all - thus one
120 * cpu could be running ppp_asynctty_receive while another
121 * calls ppp_asynctty_close, which zeroes tty->disc_data and
122 * frees the memory that ppp_asynctty_receive is using. The best
123 * way to fix this is to use a rwlock in the tty struct, but for now
124 * we use a single global rwlock for all ttys in ppp line discipline.
126 * FIXME: this is no longer true. The _close path for the ldisc is
127 * now guaranteed to be sane.
129 static DEFINE_RWLOCK(disc_data_lock
);
131 static struct asyncppp
*ap_get(struct tty_struct
*tty
)
135 read_lock(&disc_data_lock
);
138 atomic_inc(&ap
->refcnt
);
139 read_unlock(&disc_data_lock
);
143 static void ap_put(struct asyncppp
*ap
)
145 if (atomic_dec_and_test(&ap
->refcnt
))
150 * Called when a tty is put into PPP line discipline. Called in process
154 ppp_asynctty_open(struct tty_struct
*tty
)
160 ap
= kmalloc(sizeof(*ap
), GFP_KERNEL
);
164 /* initialize the asyncppp structure */
165 memset(ap
, 0, sizeof(*ap
));
168 spin_lock_init(&ap
->xmit_lock
);
169 spin_lock_init(&ap
->recv_lock
);
171 ap
->xaccm
[3] = 0x60000000U
;
177 skb_queue_head_init(&ap
->rqueue
);
178 tasklet_init(&ap
->tsk
, ppp_async_process
, (unsigned long) ap
);
180 atomic_set(&ap
->refcnt
, 1);
181 init_MUTEX_LOCKED(&ap
->dead_sem
);
183 ap
->chan
.private = ap
;
184 ap
->chan
.ops
= &async_ops
;
185 ap
->chan
.mtu
= PPP_MRU
;
186 err
= ppp_register_channel(&ap
->chan
);
201 * Called when the tty is put into another line discipline
202 * or it hangs up. We have to wait for any cpu currently
203 * executing in any of the other ppp_asynctty_* routines to
204 * finish before we can call ppp_unregister_channel and free
205 * the asyncppp struct. This routine must be called from
206 * process context, not interrupt or softirq context.
209 ppp_asynctty_close(struct tty_struct
*tty
)
213 write_lock_irq(&disc_data_lock
);
215 tty
->disc_data
= NULL
;
216 write_unlock_irq(&disc_data_lock
);
221 * We have now ensured that nobody can start using ap from now
222 * on, but we have to wait for all existing users to finish.
223 * Note that ppp_unregister_channel ensures that no calls to
224 * our channel ops (i.e. ppp_async_send/ioctl) are in progress
225 * by the time it returns.
227 if (!atomic_dec_and_test(&ap
->refcnt
))
229 tasklet_kill(&ap
->tsk
);
231 ppp_unregister_channel(&ap
->chan
);
234 skb_queue_purge(&ap
->rqueue
);
241 * Called on tty hangup in process context.
243 * Wait for I/O to driver to complete and unregister PPP channel.
244 * This is already done by the close routine, so just call that.
246 static int ppp_asynctty_hangup(struct tty_struct
*tty
)
248 ppp_asynctty_close(tty
);
253 * Read does nothing - no data is ever available this way.
254 * Pppd reads and writes packets via /dev/ppp instead.
257 ppp_asynctty_read(struct tty_struct
*tty
, struct file
*file
,
258 unsigned char __user
*buf
, size_t count
)
264 * Write on the tty does nothing, the packets all come in
265 * from the ppp generic stuff.
268 ppp_asynctty_write(struct tty_struct
*tty
, struct file
*file
,
269 const unsigned char *buf
, size_t count
)
275 * Called in process context only. May be re-entered by multiple
276 * ioctl calling threads.
280 ppp_asynctty_ioctl(struct tty_struct
*tty
, struct file
*file
,
281 unsigned int cmd
, unsigned long arg
)
283 struct asyncppp
*ap
= ap_get(tty
);
285 int __user
*p
= (int __user
*)arg
;
296 if (put_user(ppp_channel_index(&ap
->chan
), p
))
306 if (put_user(ppp_unit_number(&ap
->chan
), p
))
313 err
= n_tty_ioctl(tty
, file
, cmd
, arg
);
317 /* flush our buffers and the serial port's buffer */
318 if (arg
== TCIOFLUSH
|| arg
== TCOFLUSH
)
319 ppp_async_flush_output(ap
);
320 err
= n_tty_ioctl(tty
, file
, cmd
, arg
);
325 if (put_user(val
, p
))
338 /* No kernel lock - fine */
340 ppp_asynctty_poll(struct tty_struct
*tty
, struct file
*file
, poll_table
*wait
)
346 ppp_asynctty_room(struct tty_struct
*tty
)
352 * This can now be called from hard interrupt level as well
353 * as soft interrupt level or mainline.
356 ppp_asynctty_receive(struct tty_struct
*tty
, const unsigned char *buf
,
357 char *cflags
, int count
)
359 struct asyncppp
*ap
= ap_get(tty
);
364 spin_lock_irqsave(&ap
->recv_lock
, flags
);
365 ppp_async_input(ap
, buf
, cflags
, count
);
366 spin_unlock_irqrestore(&ap
->recv_lock
, flags
);
367 if (skb_queue_len(&ap
->rqueue
))
368 tasklet_schedule(&ap
->tsk
);
370 if (test_and_clear_bit(TTY_THROTTLED
, &tty
->flags
)
371 && tty
->driver
->unthrottle
)
372 tty
->driver
->unthrottle(tty
);
376 ppp_asynctty_wakeup(struct tty_struct
*tty
)
378 struct asyncppp
*ap
= ap_get(tty
);
380 clear_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
383 set_bit(XMIT_WAKEUP
, &ap
->xmit_flags
);
384 tasklet_schedule(&ap
->tsk
);
389 static struct tty_ldisc ppp_ldisc
= {
390 .owner
= THIS_MODULE
,
391 .magic
= TTY_LDISC_MAGIC
,
393 .open
= ppp_asynctty_open
,
394 .close
= ppp_asynctty_close
,
395 .hangup
= ppp_asynctty_hangup
,
396 .read
= ppp_asynctty_read
,
397 .write
= ppp_asynctty_write
,
398 .ioctl
= ppp_asynctty_ioctl
,
399 .poll
= ppp_asynctty_poll
,
400 .receive_room
= ppp_asynctty_room
,
401 .receive_buf
= ppp_asynctty_receive
,
402 .write_wakeup
= ppp_asynctty_wakeup
,
410 err
= tty_register_ldisc(N_PPP
, &ppp_ldisc
);
412 printk(KERN_ERR
"PPP_async: error %d registering line disc.\n",
418 * The following routines provide the PPP channel interface.
421 ppp_async_ioctl(struct ppp_channel
*chan
, unsigned int cmd
, unsigned long arg
)
423 struct asyncppp
*ap
= chan
->private;
424 void __user
*argp
= (void __user
*)arg
;
425 int __user
*p
= argp
;
432 val
= ap
->flags
| ap
->rbits
;
433 if (put_user(val
, p
))
438 if (get_user(val
, p
))
440 ap
->flags
= val
& ~SC_RCV_BITS
;
441 spin_lock_irq(&ap
->recv_lock
);
442 ap
->rbits
= val
& SC_RCV_BITS
;
443 spin_unlock_irq(&ap
->recv_lock
);
447 case PPPIOCGASYNCMAP
:
448 if (put_user(ap
->xaccm
[0], (u32 __user
*)argp
))
452 case PPPIOCSASYNCMAP
:
453 if (get_user(ap
->xaccm
[0], (u32 __user
*)argp
))
458 case PPPIOCGRASYNCMAP
:
459 if (put_user(ap
->raccm
, (u32 __user
*)argp
))
463 case PPPIOCSRASYNCMAP
:
464 if (get_user(ap
->raccm
, (u32 __user
*)argp
))
469 case PPPIOCGXASYNCMAP
:
470 if (copy_to_user(argp
, ap
->xaccm
, sizeof(ap
->xaccm
)))
474 case PPPIOCSXASYNCMAP
:
475 if (copy_from_user(accm
, argp
, sizeof(accm
)))
477 accm
[2] &= ~0x40000000U
; /* can't escape 0x5e */
478 accm
[3] |= 0x60000000U
; /* must escape 0x7d, 0x7e */
479 memcpy(ap
->xaccm
, accm
, sizeof(ap
->xaccm
));
484 if (put_user(ap
->mru
, p
))
489 if (get_user(val
, p
))
505 * This is called at softirq level to deliver received packets
506 * to the ppp_generic code, and to tell the ppp_generic code
507 * if we can accept more output now.
509 static void ppp_async_process(unsigned long arg
)
511 struct asyncppp
*ap
= (struct asyncppp
*) arg
;
514 /* process received packets */
515 while ((skb
= skb_dequeue(&ap
->rqueue
)) != NULL
) {
517 ppp_input_error(&ap
->chan
, 0);
518 ppp_input(&ap
->chan
, skb
);
521 /* try to push more stuff out */
522 if (test_bit(XMIT_WAKEUP
, &ap
->xmit_flags
) && ppp_async_push(ap
))
523 ppp_output_wakeup(&ap
->chan
);
527 * Procedures for encapsulation and framing.
531 * Procedure to encode the data for async serial transmission.
532 * Does octet stuffing (escaping), puts the address/control bytes
533 * on if A/C compression is disabled, and does protocol compression.
534 * Assumes ap->tpkt != 0 on entry.
535 * Returns 1 if we finished the current frame, 0 otherwise.
538 #define PUT_BYTE(ap, buf, c, islcp) do { \
539 if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
540 *buf++ = PPP_ESCAPE; \
547 ppp_async_encode(struct asyncppp
*ap
)
549 int fcs
, i
, count
, c
, proto
;
550 unsigned char *buf
, *buflim
;
558 data
= ap
->tpkt
->data
;
559 count
= ap
->tpkt
->len
;
561 proto
= (data
[0] << 8) + data
[1];
564 * LCP packets with code values between 1 (configure-reqest)
565 * and 7 (code-reject) must be sent as though no options
566 * had been negotiated.
568 islcp
= proto
== PPP_LCP
&& 1 <= data
[2] && data
[2] <= 7;
572 async_lcp_peek(ap
, data
, count
, 0);
575 * Start of a new packet - insert the leading FLAG
576 * character if necessary.
578 if (islcp
|| flag_time
== 0
579 || jiffies
- ap
->last_xmit
>= flag_time
)
581 ap
->last_xmit
= jiffies
;
585 * Put in the address/control bytes if necessary
587 if ((ap
->flags
& SC_COMP_AC
) == 0 || islcp
) {
588 PUT_BYTE(ap
, buf
, 0xff, islcp
);
589 fcs
= PPP_FCS(fcs
, 0xff);
590 PUT_BYTE(ap
, buf
, 0x03, islcp
);
591 fcs
= PPP_FCS(fcs
, 0x03);
596 * Once we put in the last byte, we need to put in the FCS
597 * and closing flag, so make sure there is at least 7 bytes
598 * of free space in the output buffer.
600 buflim
= ap
->obuf
+ OBUFSIZE
- 6;
601 while (i
< count
&& buf
< buflim
) {
603 if (i
== 1 && c
== 0 && (ap
->flags
& SC_COMP_PROT
))
604 continue; /* compress protocol field */
605 fcs
= PPP_FCS(fcs
, c
);
606 PUT_BYTE(ap
, buf
, c
, islcp
);
611 * Remember where we are up to in this packet.
620 * We have finished the packet. Add the FCS and flag.
624 PUT_BYTE(ap
, buf
, c
, islcp
);
625 c
= (fcs
>> 8) & 0xff;
626 PUT_BYTE(ap
, buf
, c
, islcp
);
636 * Transmit-side routines.
640 * Send a packet to the peer over an async tty line.
641 * Returns 1 iff the packet was accepted.
642 * If the packet was not accepted, we will call ppp_output_wakeup
643 * at some later time.
646 ppp_async_send(struct ppp_channel
*chan
, struct sk_buff
*skb
)
648 struct asyncppp
*ap
= chan
->private;
652 if (test_and_set_bit(XMIT_FULL
, &ap
->xmit_flags
))
653 return 0; /* already full */
662 * Push as much data as possible out to the tty.
665 ppp_async_push(struct asyncppp
*ap
)
667 int avail
, sent
, done
= 0;
668 struct tty_struct
*tty
= ap
->tty
;
672 * We can get called recursively here if the tty write
673 * function calls our wakeup function. This can happen
674 * for example on a pty with both the master and slave
675 * set to PPP line discipline.
676 * We use the XMIT_BUSY bit to detect this and get out,
677 * leaving the XMIT_WAKEUP bit set to tell the other
678 * instance that it may now be able to write more now.
680 if (test_and_set_bit(XMIT_BUSY
, &ap
->xmit_flags
))
682 spin_lock_bh(&ap
->xmit_lock
);
684 if (test_and_clear_bit(XMIT_WAKEUP
, &ap
->xmit_flags
))
686 if (!tty_stuffed
&& ap
->optr
< ap
->olim
) {
687 avail
= ap
->olim
- ap
->optr
;
688 set_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
689 sent
= tty
->driver
->write(tty
, ap
->optr
, avail
);
691 goto flush
; /* error, e.g. loss of CD */
697 if (ap
->optr
>= ap
->olim
&& ap
->tpkt
!= 0) {
698 if (ppp_async_encode(ap
)) {
699 /* finished processing ap->tpkt */
700 clear_bit(XMIT_FULL
, &ap
->xmit_flags
);
706 * We haven't made any progress this time around.
707 * Clear XMIT_BUSY to let other callers in, but
708 * after doing so we have to check if anyone set
709 * XMIT_WAKEUP since we last checked it. If they
710 * did, we should try again to set XMIT_BUSY and go
711 * around again in case XMIT_BUSY was still set when
712 * the other caller tried.
714 clear_bit(XMIT_BUSY
, &ap
->xmit_flags
);
715 /* any more work to do? if not, exit the loop */
716 if (!(test_bit(XMIT_WAKEUP
, &ap
->xmit_flags
)
717 || (!tty_stuffed
&& ap
->tpkt
!= 0)))
719 /* more work to do, see if we can do it now */
720 if (test_and_set_bit(XMIT_BUSY
, &ap
->xmit_flags
))
723 spin_unlock_bh(&ap
->xmit_lock
);
727 clear_bit(XMIT_BUSY
, &ap
->xmit_flags
);
731 clear_bit(XMIT_FULL
, &ap
->xmit_flags
);
735 spin_unlock_bh(&ap
->xmit_lock
);
740 * Flush output from our internal buffers.
741 * Called for the TCFLSH ioctl. Can be entered in parallel
742 * but this is covered by the xmit_lock.
745 ppp_async_flush_output(struct asyncppp
*ap
)
749 spin_lock_bh(&ap
->xmit_lock
);
751 if (ap
->tpkt
!= NULL
) {
754 clear_bit(XMIT_FULL
, &ap
->xmit_flags
);
757 spin_unlock_bh(&ap
->xmit_lock
);
759 ppp_output_wakeup(&ap
->chan
);
763 * Receive-side routines.
766 /* see how many ordinary chars there are at the start of buf */
768 scan_ordinary(struct asyncppp
*ap
, const unsigned char *buf
, int count
)
772 for (i
= 0; i
< count
; ++i
) {
774 if (c
== PPP_ESCAPE
|| c
== PPP_FLAG
775 || (c
< 0x20 && (ap
->raccm
& (1 << c
)) != 0))
781 /* called when a flag is seen - do end-of-packet processing */
783 process_input_packet(struct asyncppp
*ap
)
787 unsigned int len
, fcs
, proto
;
790 if (ap
->state
& (SC_TOSS
| SC_ESCAPE
))
794 return; /* 0-length packet */
800 goto err
; /* too short */
802 for (; len
> 0; --len
)
803 fcs
= PPP_FCS(fcs
, *p
++);
804 if (fcs
!= PPP_GOODFCS
)
805 goto err
; /* bad FCS */
806 skb_trim(skb
, skb
->len
- 2);
808 /* check for address/control and protocol compression */
810 if (p
[0] == PPP_ALLSTATIONS
&& p
[1] == PPP_UI
) {
811 /* chop off address/control */
814 p
= skb_pull(skb
, 2);
818 /* protocol is compressed */
819 skb_push(skb
, 1)[0] = 0;
823 proto
= (proto
<< 8) + p
[1];
824 if (proto
== PPP_LCP
)
825 async_lcp_peek(ap
, p
, skb
->len
, 1);
828 /* queue the frame to be processed */
829 skb
->cb
[0] = ap
->state
;
830 skb_queue_tail(&ap
->rqueue
, skb
);
836 /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
837 ap
->state
= SC_PREV_ERROR
;
842 /* Called when the tty driver has data for us. Runs parallel with the
843 other ldisc functions but will not be re-entered */
846 ppp_async_input(struct asyncppp
*ap
, const unsigned char *buf
,
847 char *flags
, int count
)
850 int c
, i
, j
, n
, s
, f
;
853 /* update bits used for 8-bit cleanness detection */
854 if (~ap
->rbits
& SC_RCV_BITS
) {
856 for (i
= 0; i
< count
; ++i
) {
858 if (flags
!= 0 && flags
[i
] != 0)
860 s
|= (c
& 0x80)? SC_RCV_B7_1
: SC_RCV_B7_0
;
861 c
= ((c
>> 4) ^ c
) & 0xf;
862 s
|= (0x6996 & (1 << c
))? SC_RCV_ODDP
: SC_RCV_EVNP
;
868 /* scan through and see how many chars we can do in bulk */
869 if ((ap
->state
& SC_ESCAPE
) && buf
[0] == PPP_ESCAPE
)
872 n
= scan_ordinary(ap
, buf
, count
);
875 if (flags
!= 0 && (ap
->state
& SC_TOSS
) == 0) {
876 /* check the flags to see if any char had an error */
877 for (j
= 0; j
< n
; ++j
)
878 if ((f
= flags
[j
]) != 0)
883 ap
->state
|= SC_TOSS
;
885 } else if (n
> 0 && (ap
->state
& SC_TOSS
) == 0) {
886 /* stuff the chars in the skb */
889 skb
= dev_alloc_skb(ap
->mru
+ PPP_HDRLEN
+ 2);
892 /* Try to get the payload 4-byte aligned */
893 if (buf
[0] != PPP_ALLSTATIONS
)
894 skb_reserve(skb
, 2 + (buf
[0] & 1));
897 if (n
> skb_tailroom(skb
)) {
898 /* packet overflowed MRU */
899 ap
->state
|= SC_TOSS
;
901 sp
= skb_put(skb
, n
);
903 if (ap
->state
& SC_ESCAPE
) {
905 ap
->state
&= ~SC_ESCAPE
;
914 if (flags
!= NULL
&& flags
[n
] != 0) {
915 ap
->state
|= SC_TOSS
;
916 } else if (c
== PPP_FLAG
) {
917 process_input_packet(ap
);
918 } else if (c
== PPP_ESCAPE
) {
919 ap
->state
|= SC_ESCAPE
;
920 } else if (I_IXON(ap
->tty
)) {
921 if (c
== START_CHAR(ap
->tty
))
923 else if (c
== STOP_CHAR(ap
->tty
))
926 /* otherwise it's a char in the recv ACCM */
937 printk(KERN_ERR
"PPPasync: no memory (input pkt)\n");
938 ap
->state
|= SC_TOSS
;
942 * We look at LCP frames going past so that we can notice
943 * and react to the LCP configure-ack from the peer.
944 * In the situation where the peer has been sent a configure-ack
945 * already, LCP is up once it has sent its configure-ack
946 * so the immediately following packet can be sent with the
947 * configured LCP options. This allows us to process the following
948 * packet correctly without pppd needing to respond quickly.
950 * We only respond to the received configure-ack if we have just
951 * sent a configure-request, and the configure-ack contains the
952 * same data (this is checked using a 16-bit crc of the data).
954 #define CONFREQ 1 /* LCP code field values */
956 #define LCP_MRU 1 /* LCP option numbers */
957 #define LCP_ASYNCMAP 2
959 static void async_lcp_peek(struct asyncppp
*ap
, unsigned char *data
,
960 int len
, int inbound
)
962 int dlen
, fcs
, i
, code
;
965 data
+= 2; /* skip protocol bytes */
967 if (len
< 4) /* 4 = code, ID, length */
970 if (code
!= CONFACK
&& code
!= CONFREQ
)
972 dlen
= (data
[2] << 8) + data
[3];
974 return; /* packet got truncated or length is bogus */
976 if (code
== (inbound
? CONFACK
: CONFREQ
)) {
978 * sent confreq or received confack:
979 * calculate the crc of the data from the ID field on.
982 for (i
= 1; i
< dlen
; ++i
)
983 fcs
= PPP_FCS(fcs
, data
[i
]);
986 /* outbound confreq - remember the crc for later */
991 /* received confack, check the crc */
997 return; /* not interested in received confreq */
999 /* process the options in the confack */
1002 /* data[0] is code, data[1] is length */
1003 while (dlen
>= 2 && dlen
>= data
[1] && data
[1] >= 2) {
1006 val
= (data
[2] << 8) + data
[3];
1013 val
= (data
[2] << 24) + (data
[3] << 16)
1014 + (data
[4] << 8) + data
[5];
1026 static void __exit
ppp_async_cleanup(void)
1028 if (tty_register_ldisc(N_PPP
, NULL
) != 0)
1029 printk(KERN_ERR
"failed to unregister PPP line discipline\n");
1032 module_init(ppp_async_init
);
1033 module_exit(ppp_async_cleanup
);