2 * T1040 Silicon/SoC Device Tree Source (post include)
4 * Copyright 2013 - 2014 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #include <dt-bindings/thermal/thermal.h>
38 compatible = "fsl,bman-fbpr";
39 alloc-ranges = <0 0 0x10000 0>;
43 compatible = "fsl,qman-fqd";
44 alloc-ranges = <0 0 0x10000 0>;
48 compatible = "fsl,qman-pfdr";
49 alloc-ranges = <0 0 0x10000 0>;
55 compatible = "fsl,ifc", "simple-bus";
56 interrupts = <25 2 0 0>;
60 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
64 bus-range = <0x0 0xff>;
65 interrupts = <20 2 0 0>;
66 fsl,iommu-parent = <&pamu0>;
69 #interrupt-cells = <1>;
73 interrupts = <20 2 0 0>;
74 interrupt-map-mask = <0xf800 0 0 7>;
77 0000 0 0 1 &mpic 40 1 0 0
78 0000 0 0 2 &mpic 1 1 0 0
79 0000 0 0 3 &mpic 2 1 0 0
80 0000 0 0 4 &mpic 3 1 0 0
86 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
91 interrupts = <21 2 0 0>;
92 fsl,iommu-parent = <&pamu0>;
95 #interrupt-cells = <1>;
99 interrupts = <21 2 0 0>;
100 interrupt-map-mask = <0xf800 0 0 7>;
103 0000 0 0 1 &mpic 41 1 0 0
104 0000 0 0 2 &mpic 5 1 0 0
105 0000 0 0 3 &mpic 6 1 0 0
106 0000 0 0 4 &mpic 7 1 0 0
112 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
115 #address-cells = <3>;
116 bus-range = <0x0 0xff>;
117 interrupts = <22 2 0 0>;
118 fsl,iommu-parent = <&pamu0>;
121 #interrupt-cells = <1>;
123 #address-cells = <3>;
125 interrupts = <22 2 0 0>;
126 interrupt-map-mask = <0xf800 0 0 7>;
129 0000 0 0 1 &mpic 42 1 0 0
130 0000 0 0 2 &mpic 9 1 0 0
131 0000 0 0 3 &mpic 10 1 0 0
132 0000 0 0 4 &mpic 11 1 0 0
138 compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
141 #address-cells = <3>;
142 bus-range = <0x0 0xff>;
143 interrupts = <23 2 0 0>;
144 fsl,iommu-parent = <&pamu0>;
147 #interrupt-cells = <1>;
149 #address-cells = <3>;
151 interrupts = <23 2 0 0>;
152 interrupt-map-mask = <0xf800 0 0 7>;
155 0000 0 0 1 &mpic 43 1 0 0
156 0000 0 0 2 &mpic 0 1 0 0
157 0000 0 0 3 &mpic 4 1 0 0
158 0000 0 0 4 &mpic 8 1 0 0
164 #address-cells = <1>;
166 compatible = "fsl,dcsr", "simple-bus";
169 compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
170 interrupts = <52 2 0 0
176 compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
177 reg = <0x1000 0x1000 0x1002000 0x10000>;
180 compatible = "fsl,dcsr-nxc";
181 reg = <0x2000 0x1000>;
184 compatible = "fsl,dcsr-corenet";
185 reg = <0x8000 0x1000 0x1A000 0x1000>;
188 compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
189 reg = <0x9000 0x1000>;
192 compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
193 reg = <0x11000 0x1000>;
196 compatible = "fsl,dcsr-ddr";
197 dev-handle = <&ddr1>;
198 reg = <0x12000 0x1000>;
201 compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
202 reg = <0x18000 0x1000>;
205 compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
206 reg = <0x22000 0x1000>;
209 compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
210 reg = <0x30000 0x1000 0x1022000 0x10000>;
213 compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
214 reg = <0x31000 0x1000 0x1042000 0x10000>;
216 dcsr-cpu-sb-proxy@100000 {
217 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
218 cpu-handle = <&cpu0>;
219 reg = <0x100000 0x1000 0x101000 0x1000>;
221 dcsr-cpu-sb-proxy@108000 {
222 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
223 cpu-handle = <&cpu1>;
224 reg = <0x108000 0x1000 0x109000 0x1000>;
226 dcsr-cpu-sb-proxy@110000 {
227 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
228 cpu-handle = <&cpu2>;
229 reg = <0x110000 0x1000 0x111000 0x1000>;
231 dcsr-cpu-sb-proxy@118000 {
232 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
233 cpu-handle = <&cpu3>;
234 reg = <0x118000 0x1000 0x119000 0x1000>;
239 #address-cells = <0x1>;
241 compatible = "simple-bus";
244 compatible = "fsl,bman-portal";
245 reg = <0x0 0x4000>, <0x1000000 0x1000>;
246 interrupts = <105 2 0 0>;
249 compatible = "fsl,bman-portal";
250 reg = <0x4000 0x4000>, <0x1001000 0x1000>;
251 interrupts = <107 2 0 0>;
254 compatible = "fsl,bman-portal";
255 reg = <0x8000 0x4000>, <0x1002000 0x1000>;
256 interrupts = <109 2 0 0>;
259 compatible = "fsl,bman-portal";
260 reg = <0xc000 0x4000>, <0x1003000 0x1000>;
261 interrupts = <111 2 0 0>;
264 compatible = "fsl,bman-portal";
265 reg = <0x10000 0x4000>, <0x1004000 0x1000>;
266 interrupts = <113 2 0 0>;
269 compatible = "fsl,bman-portal";
270 reg = <0x14000 0x4000>, <0x1005000 0x1000>;
271 interrupts = <115 2 0 0>;
274 compatible = "fsl,bman-portal";
275 reg = <0x18000 0x4000>, <0x1006000 0x1000>;
276 interrupts = <117 2 0 0>;
279 compatible = "fsl,bman-portal";
280 reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
281 interrupts = <119 2 0 0>;
284 compatible = "fsl,bman-portal";
285 reg = <0x20000 0x4000>, <0x1008000 0x1000>;
286 interrupts = <121 2 0 0>;
289 compatible = "fsl,bman-portal";
290 reg = <0x24000 0x4000>, <0x1009000 0x1000>;
291 interrupts = <123 2 0 0>;
296 #address-cells = <0x1>;
298 compatible = "simple-bus";
300 qportal0: qman-portal@0 {
301 compatible = "fsl,qman-portal";
302 reg = <0x0 0x4000>, <0x1000000 0x1000>;
303 interrupts = <104 0x2 0 0>;
306 qportal1: qman-portal@4000 {
307 compatible = "fsl,qman-portal";
308 reg = <0x4000 0x4000>, <0x1001000 0x1000>;
309 interrupts = <106 0x2 0 0>;
312 qportal2: qman-portal@8000 {
313 compatible = "fsl,qman-portal";
314 reg = <0x8000 0x4000>, <0x1002000 0x1000>;
315 interrupts = <108 0x2 0 0>;
318 qportal3: qman-portal@c000 {
319 compatible = "fsl,qman-portal";
320 reg = <0xc000 0x4000>, <0x1003000 0x1000>;
321 interrupts = <110 0x2 0 0>;
324 qportal4: qman-portal@10000 {
325 compatible = "fsl,qman-portal";
326 reg = <0x10000 0x4000>, <0x1004000 0x1000>;
327 interrupts = <112 0x2 0 0>;
330 qportal5: qman-portal@14000 {
331 compatible = "fsl,qman-portal";
332 reg = <0x14000 0x4000>, <0x1005000 0x1000>;
333 interrupts = <114 0x2 0 0>;
336 qportal6: qman-portal@18000 {
337 compatible = "fsl,qman-portal";
338 reg = <0x18000 0x4000>, <0x1006000 0x1000>;
339 interrupts = <116 0x2 0 0>;
342 qportal7: qman-portal@1c000 {
343 compatible = "fsl,qman-portal";
344 reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
345 interrupts = <118 0x2 0 0>;
348 qportal8: qman-portal@20000 {
349 compatible = "fsl,qman-portal";
350 reg = <0x20000 0x4000>, <0x1008000 0x1000>;
351 interrupts = <120 0x2 0 0>;
354 qportal9: qman-portal@24000 {
355 compatible = "fsl,qman-portal";
356 reg = <0x24000 0x4000>, <0x1009000 0x1000>;
357 interrupts = <122 0x2 0 0>;
363 #address-cells = <1>;
366 compatible = "simple-bus";
369 compatible = "fsl,soc-sram-error";
370 interrupts = <16 2 1 29>;
374 compatible = "fsl,corenet-law";
379 ddr1: memory-controller@8000 {
380 compatible = "fsl,qoriq-memory-controller-v5.0",
381 "fsl,qoriq-memory-controller";
382 reg = <0x8000 0x1000>;
383 interrupts = <16 2 1 23>;
386 cpc: l3-cache-controller@10000 {
387 compatible = "fsl,t1040-l3-cache-controller", "cache";
388 reg = <0x10000 0x1000>;
389 interrupts = <16 2 1 27>;
393 compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
394 reg = <0x18000 0x1000>;
395 interrupts = <16 2 1 31>;
396 fsl,ccf-num-csdids = <32>;
397 fsl,ccf-num-snoopids = <32>;
401 compatible = "fsl,pamu-v1.0", "fsl,pamu";
402 reg = <0x20000 0x1000>;
403 ranges = <0 0x20000 0x1000>;
404 #address-cells = <1>;
411 fsl,primary-cache-geometry = <128 1>;
412 fsl,secondary-cache-geometry = <16 2>;
416 /include/ "qoriq-mpic.dtsi"
418 guts: global-utilities@e0000 {
419 compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
420 reg = <0xe0000 0xe00>;
422 fsl,liodn-bits = <12>;
425 /include/ "qoriq-clockgen2.dtsi"
426 global-utilities@e1000 {
427 compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
432 compatible = "fsl,qoriq-core-mux-2.0";
433 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
434 <&pll1 0>, <&pll1 1>, <&pll1 2>;
435 clock-names = "pll0", "pll0-div2", "pll1-div4",
436 "pll1", "pll1-div2", "pll1-div4";
437 clock-output-names = "cmux0";
443 compatible = "fsl,qoriq-core-mux-2.0";
444 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
445 <&pll1 0>, <&pll1 1>, <&pll1 2>;
446 clock-names = "pll0", "pll0-div2", "pll1-div4",
447 "pll1", "pll1-div2", "pll1-div4";
448 clock-output-names = "cmux1";
454 compatible = "fsl,qoriq-core-mux-2.0";
455 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
456 <&pll1 0>, <&pll1 1>, <&pll1 2>;
457 clock-names = "pll0", "pll0-div2", "pll1-div4",
458 "pll1", "pll1-div2", "pll1-div4";
459 clock-output-names = "cmux2";
465 compatible = "fsl,qoriq-core-mux-2.0";
466 clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
467 <&pll1 0>, <&pll1 1>, <&pll1 2>;
468 clock-names = "pll0_0", "pll0_1", "pll0_2",
469 "pll1_0", "pll1_1", "pll1_2";
470 clock-output-names = "cmux3";
474 rcpm: global-utilities@e2000 {
475 compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
476 reg = <0xe2000 0x1000>;
480 compatible = "fsl,t1040-sfp";
481 reg = <0xe8000 0x1000>;
484 serdes: serdes@ea000 {
485 compatible = "fsl,t1040-serdes";
486 reg = <0xea000 0x4000>;
490 compatible = "fsl,qoriq-tmu";
491 reg = <0xf0000 0x1000>;
492 interrupts = <18 2 0 0>;
493 fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
494 fsl,tmu-calibration = <0x00000000 0x00000025
495 0x00000001 0x00000028
496 0x00000002 0x0000002d
497 0x00000003 0x00000031
498 0x00000004 0x00000036
499 0x00000005 0x0000003a
500 0x00000006 0x00000040
501 0x00000007 0x00000044
502 0x00000008 0x0000004a
503 0x00000009 0x0000004f
504 0x0000000a 0x00000054
506 0x00010000 0x0000000d
507 0x00010001 0x00000013
508 0x00010002 0x00000019
509 0x00010003 0x0000001f
510 0x00010004 0x00000025
511 0x00010005 0x0000002d
512 0x00010006 0x00000033
513 0x00010007 0x00000043
514 0x00010008 0x0000004b
515 0x00010009 0x00000053
517 0x00020000 0x00000010
518 0x00020001 0x00000017
519 0x00020002 0x0000001f
520 0x00020003 0x00000029
521 0x00020004 0x00000031
522 0x00020005 0x0000003c
523 0x00020006 0x00000042
524 0x00020007 0x0000004d
525 0x00020008 0x00000056
527 0x00030000 0x00000012
528 0x00030001 0x0000001d>;
529 #thermal-sensor-cells = <1>;
533 cpu_thermal: cpu-thermal {
534 polling-delay-passive = <1000>;
535 polling-delay = <5000>;
537 thermal-sensors = <&tmu 2>;
540 cpu_alert: cpu-alert {
541 temperature = <85000>;
546 temperature = <95000>;
556 <&cpu0 THERMAL_NO_LIMIT
562 <&cpu1 THERMAL_NO_LIMIT
568 <&cpu2 THERMAL_NO_LIMIT
574 <&cpu3 THERMAL_NO_LIMIT
581 scfg: global-utilities@fc000 {
582 compatible = "fsl,t1040-scfg";
583 reg = <0xfc000 0x1000>;
586 /include/ "elo3-dma-0.dtsi"
587 /include/ "elo3-dma-1.dtsi"
588 /include/ "qoriq-espi-0.dtsi"
590 fsl,espi-num-chipselects = <4>;
593 /include/ "qoriq-esdhc-0.dtsi"
595 compatible = "fsl,t1040-esdhc", "fsl,esdhc";
596 fsl,iommu-parent = <&pamu0>;
597 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
600 /include/ "qoriq-i2c-0.dtsi"
601 /include/ "qoriq-i2c-1.dtsi"
602 /include/ "qoriq-duart-0.dtsi"
603 /include/ "qoriq-duart-1.dtsi"
604 /include/ "qoriq-gpio-0.dtsi"
605 /include/ "qoriq-gpio-1.dtsi"
606 /include/ "qoriq-gpio-2.dtsi"
607 /include/ "qoriq-gpio-3.dtsi"
608 /include/ "qoriq-usb2-mph-0.dtsi"
610 compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
611 fsl,iommu-parent = <&pamu0>;
612 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
616 /include/ "qoriq-usb2-dr-0.dtsi"
618 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
619 fsl,iommu-parent = <&pamu0>;
620 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
626 compatible = "fsl,t1040-diu", "fsl,diu";
627 reg = <0x180000 1000>;
628 interrupts = <74 2 0 0>;
631 /include/ "qoriq-sata2-0.dtsi"
633 fsl,iommu-parent = <&pamu0>;
634 fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
636 /include/ "qoriq-sata2-1.dtsi"
638 fsl,iommu-parent = <&pamu0>;
639 fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
641 /include/ "qoriq-sec5.0-0.dtsi"
642 /include/ "qoriq-qman3.dtsi"
643 /include/ "qoriq-bman1.dtsi"
645 /include/ "qoriq-fman3l-0.dtsi"
646 /include/ "qoriq-fman3-0-1g-0.dtsi"
647 /include/ "qoriq-fman3-0-1g-1.dtsi"
648 /include/ "qoriq-fman3-0-1g-2.dtsi"
649 /include/ "qoriq-fman3-0-1g-3.dtsi"
650 /include/ "qoriq-fman3-0-1g-4.dtsi"
652 enet0: ethernet@e0000 {
655 enet1: ethernet@e2000 {
658 enet2: ethernet@e4000 {
661 enet3: ethernet@e6000 {
664 enet4: ethernet@e8000 {
668 interrupts = <100 1 0 0>;
678 #address-cells = <1>;
681 compatible = "fsl,qe";
682 fsl,qe-num-riscs = <1>;
683 fsl,qe-num-snums = <28>;
685 qeic: interrupt-controller@80 {
686 interrupt-controller;
687 compatible = "fsl,qe-ic";
688 #address-cells = <0>;
689 #interrupt-cells = <1>;
691 interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
696 reg = <0x2000 0x200>;
698 interrupt-parent = <&qeic>;
703 reg = <0x2200 0x200>;
705 interrupt-parent = <&qeic>;
709 #address-cells = <1>;
711 compatible = "fsl,qe-muram", "fsl,cpm-muram";
712 ranges = <0x0 0x10000 0x6000>;
715 compatible = "fsl,qe-muram-data",
716 "fsl,cpm-muram-data";