runtest.exp

   1 # runtest.exp -- Test framework driver
   2 # Copyright (C) 1992-2019, 2020 Free Software Foundation, Inc.
   3 #
   4 # This file is part of DejaGnu.
   5 #
   6 # DejaGnu is free software; you can redistribute it and/or modify it
   7 # under the terms of the GNU General Public License as published by
   8 # the Free Software Foundation; either version 3 of the License, or
   9 # (at your option) any later version.
  10 #
  11 # DejaGnu is distributed in the hope that it will be useful, but
  12 # WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14 # General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU General Public License
  17 # along with DejaGnu; if not, write to the Free Software Foundation,
  18 # Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  19
  20 # This file was written by Rob Savoye <rob@welcomehome.org>.
  21
  22 set frame_version       1.6.3-rc4
  23 if {![info exists argv0]} {
  24     send_error "Must use a version of Expect greater than 5.0\n"
  25     exit 1
  26 }
  27
  28 # trap some signals so we know whats happening. These definitions are only
  29 # temporary until we read in the library stuff
  30 #
  31 trap { send_user "\ninterrupted by user\n"; exit 130 } SIGINT
  32 trap { send_user "\nquit\n";                exit 131 } SIGQUIT
  33 trap { send_user "\nterminated\n";          exit 143 } SIGTERM
  34
  35 #
  36 # Initialize a few global variables used by all tests.
  37 # `reset_vars' resets several of these, we define them here to document their
  38 # existence.  In fact, it would be nice if all globals used by some interface
  39 # of dejagnu proper were documented here.
  40 #
  41 # Keep these all lowercase.  Interface variables used by the various
  42 # testsuites (eg: the gcc testsuite) should be in all capitals
  43 # (eg: TORTURE_OPTIONS).
  44 #
  45 set mail_logs   0               ;# flag for mailing of summary and diff logs
  46 set psum_file   "latest"        ;# file name of previous summary to diff against
  47
  48 set exit_status 0               ;# exit code returned by this program
  49
  50 set xfail_flag  0               ;# indicates that a failure is expected
  51 set xfail_prms  0               ;# GNATS prms id number for this expected failure
  52 set kfail_flag  0               ;# indicates that it is a known failure
  53 set kfail_prms  0               ;# bug id for the description of the known failure
  54 set sum_file    ""              ;# name of the file that contains the summary log
  55 set base_dir    ""              ;# the current working directory
  56 set xml_file    ""              ;# handle on the XML file if requested
  57 set xml         0               ;# flag for requesting xml
  58 set logname     ""              ;# the users login name
  59 set prms_id     0               ;# GNATS prms id number
  60 set bug_id      0               ;# optional bug id number
  61 set dir         ""              ;# temp variable for directory names
  62 set srcdir      "."             ;# source directory containing the test suite
  63 set ignoretests ""              ;# list of tests to not execute
  64 set objdir      "."             ;# directory where test case binaries live
  65 set reboot      0
  66 set multipass   ""              ;# list of passes and var settings
  67 set errno       "";             ;#
  68 set exit_error  1               ;# Toggle for whether to set the exit status
  69                                 ;# on Tcl bugs in test case drivers.
  70 #
  71 # These describe the host and target environments.
  72 #
  73 set build_triplet  ""           ;# type of architecture to run tests on
  74 set build_os       ""           ;# type of os the tests are running on
  75 set build_vendor   ""           ;# vendor name of the OS or workstation the test are running on
  76 set build_cpu      ""           ;# type of the cpu tests are running on
  77 set host_triplet   ""           ;# type of architecture to run tests on, sometimes remotely
  78 set host_os        ""           ;# type of os the tests are running on
  79 set host_vendor    ""           ;# vendor name of the OS or workstation the test are running on
  80 set host_cpu       ""           ;# type of the cpu tests are running on
  81 set target_triplet ""           ;# type of architecture to run tests on, final remote
  82 set target_os      ""           ;# type of os the tests are running on
  83 set target_vendor  ""           ;# vendor name of the OS or workstation the test are running on
  84 set target_cpu     ""           ;# type of the cpu tests are running on
  85 set target_alias   ""           ;# standard abbreviation of target
  86 set compiler_flags ""           ;# the flags used by the compiler
  87
  88 #
  89 # These set configuration file names and are local to this file.
  90 #
  91 set local_init_file     site.exp        ;# testsuite-local init file name
  92 set global_init_file    site.exp        ;# global init file name
  93
  94 #
  95 # These are used to locate parts of the testsuite.
  96 #
  97 set testsuitedir        "testsuite"     ;# top-level testsuite source directory
  98 set testbuilddir        "testsuite"     ;# top-level testsuite object directory
  99
 100 #
 101 # Collected errors
 102 #
 103 namespace eval ::dejagnu::error {
 104     # list of { file message errorCode errorInfo } lists
 105     variable list [list]
 106 }
 107
 108 # Various ccache versions provide incorrect debug info such as ignoring
 109 # different current directory, breaking GDB testsuite.
 110 set env(CCACHE_DISABLE) 1
 111 unset -nocomplain env(CCACHE_NODISABLE)
 112
 113 #
 114 # some convenience abbreviations
 115 #
 116 set hex "0x\[0-9A-Fa-f\]+"
 117 set decimal "\[0-9\]+"
 118
 119 #
 120 # set the base dir (current working directory)
 121 #
 122 set base_dir [pwd]
 123
 124 #
 125 # These are set here instead of the init module so they can be overridden
 126 # by command line options.
 127 #
 128 set all_flag    0
 129 set binpath     ""
 130 set debug       0
 131 set options     ""
 132 set outdir      "."
 133 set reboot      1
 134 set tracelevel  0
 135 set verbose     0
 136 set log_dialog  0
 137
 138 #
 139 # verbose [-n] [-log] [--] message [level]
 140 #
 141 # Print MESSAGE if the verbose level is >= LEVEL.
 142 # The default value of LEVEL is 1.
 143 # "-n" says to not print a trailing newline.
 144 # "-log" says to add the text to the log file even if it won't be printed.
 145 # Note that the apparent behaviour of `send_user' dictates that if the message
 146 # is printed it is also added to the log file.
 147 # Use "--" if MESSAGE begins with "-".
 148 #
 149 # This is defined here rather than in framework.exp so we can use it
 150 # while still loading in the support files.
 151 #
 152 proc verbose { args } {
 153     global verbose
 154     set newline 1
 155     set logfile 0
 156
 157     set i 0
 158     if { [string index [lindex $args 0] 0] eq "-" } {
 159         for { set i 0 } { $i < [llength $args] } { incr i } {
 160             if { [lindex $args $i] eq "--" } {
 161                 incr i
 162                 break
 163             } elseif { [lindex $args $i] eq "-n" } {
 164                 set newline 0
 165             } elseif { [lindex $args $i] eq "-log" } {
 166                 set logfile 1
 167             } elseif { [lindex $args $i] eq "-x" } {
 168                 set xml 1
 169             } elseif { [string index [lindex $args $i] 0] eq "-" } {
 170                 clone_output "ERROR: verbose: illegal argument: [lindex $args $i]"
 171                 return
 172             } else {
 173                 break
 174             }
 175         }
 176         if { [llength $args] == $i } {
 177             clone_output "ERROR: verbose: nothing to print"
 178             return
 179         }
 180     }
 181
 182     set level 1
 183     if { [llength $args] > $i + 1 } {
 184         set level [lindex $args [expr { $i + 1 }]]
 185     }
 186     set message [lindex $args $i]
 187
 188     if { $verbose >= $level } {
 189         # We assume send_user also sends the text to the log file (which
 190         # appears to be the case though the docs aren't clear on this).
 191         if { $newline } {
 192             send_user -- "$message\n"
 193         } else {
 194             send_user -- $message
 195         }
 196     } elseif { $logfile } {
 197         if { $newline } {
 198             send_log -- "$message\n"
 199         } else {
 200             send_log -- $message
 201         }
 202     }
 203 }
 204
 205 #
 206 # Transform a tool name to get the installed name.
 207 # target_triplet is the canonical target name.  target_alias is the
 208 # target name used when configure was run.
 209 #
 210 proc transform { name } {
 211     global target_triplet
 212     global target_alias
 213     global host_triplet
 214     global board
 215
 216     if { $target_triplet eq $host_triplet } {
 217         return $name
 218     }
 219     if { $target_triplet eq "native" } {
 220         return $name
 221     }
 222     if {[board_info host exists no_transform_name]} {
 223         return $name
 224     }
 225     if { $target_triplet eq "" } {
 226         return $name
 227     } else {
 228         if {[info exists board]} {
 229             if {[board_info $board exists target_install]} {
 230                 set target_install [board_info $board target_install]
 231             }
 232         }
 233         if {[target_info exists target_install]} {
 234             set target_install [target_info target_install]
 235         }
 236         if {[info exists target_alias]} {
 237             set tmp $target_alias-$name
 238         } elseif {[info exists target_install]} {
 239             if { [lsearch -exact $target_install $target_alias] >= 0 } {
 240                 set tmp $target_alias-$name
 241             } else {
 242                 set tmp "[lindex $target_install 0]-$name"
 243             }
 244         }
 245         verbose "Transforming $name to $tmp"
 246         return $tmp
 247     }
 248 }
 249
 250 #
 251 # findfile arg0 [arg1] [arg2]
 252 #
 253 # Find a file and see if it exists. If you only care about the false
 254 # condition, then you'll need to pass a null "" for arg1.
 255 #       arg0 is the filename to look for. If the only arg,
 256 #            then that's what gets returned. If this is the
 257 #            only arg, then if it exists, arg0 gets returned.
 258 #            if it doesn't exist, return only the prog name.
 259 #       arg1 is optional, and it's what gets returned if
 260 #            the file exists.
 261 #       arg2 is optional, and it's what gets returned if
 262 #            the file doesn't exist.
 263 #
 264 proc findfile { args } {
 265     # look for the file
 266     verbose "Seeing if [lindex $args 0] exists." 2
 267     if {[file exists [lindex $args 0]]} {
 268         if { [llength $args] > 1 } {
 269             verbose "Found file, returning [lindex $args 1]"
 270             return [lindex $args 1]
 271         } else {
 272             verbose "Found file, returning [lindex $args 0]"
 273             return [lindex $args 0]
 274         }
 275     } else {
 276         if { [llength $args] > 2 } {
 277             verbose "Didn't find file [lindex $args 0], returning [lindex $args 2]"
 278             return [lindex $args 2]
 279         } else {
 280             verbose "Didn't find file, returning [file tail [lindex $args 0]]"
 281             return [transform [file tail [lindex $args 0]]]
 282         }
 283     }
 284 }
 285
 286 #
 287 # load_file [-1] [--] file1 [ file2 ... ]
 288 #
 289 # Utility to source a file.  All are sourced in order unless the flag "-1"
 290 # is given in which case we stop after finding the first one.
 291 # The result is 1 if a file was found, 0 if not.
 292 # If a tcl error occurs while sourcing a file, we print an error message
 293 # and exit.
 294 #
 295 proc load_file { args } {
 296     set i 0
 297     set only_one 0
 298     if { [lindex $args $i] eq "-1" } {
 299         set only_one 1
 300         incr i
 301     }
 302     if { [lindex $args $i] eq "--" } {
 303         incr i
 304     }
 305
 306     set found 0
 307     foreach file [lrange $args $i end] {
 308         verbose "Looking for $file" 2
 309         # In Tcl, "file exists" fails if the filename looks like
 310         # ~/FILE and the environment variable HOME does not exist.
 311         if {! [catch {file exists $file} result] && $result} {
 312             set found 1
 313             verbose "Found $file"
 314             if { [catch "uplevel #0 source $file"] == 1 } {
 315                 send_error "ERROR: tcl error sourcing $file.\n"
 316                 global errorInfo
 317                 if {[info exists errorInfo]} {
 318                     send_error "$errorInfo\n"
 319                 }
 320                 exit 1
 321             }
 322             if { $only_one } {
 323                 break
 324             }
 325         }
 326     }
 327     return $found
 328 }
 329
 330 #
 331 # search_and_load_file -- search DIRLIST looking for FILELIST.
 332 # TYPE is used when displaying error and progress messages.
 333 #
 334 proc search_and_load_file { type filelist dirlist } {
 335     set found 0
 336
 337     foreach dir $dirlist {
 338         foreach initfile $filelist {
 339             set filename [file join $dir $initfile]
 340             verbose "Looking for $type $filename" 2
 341             if {[file exists $filename]} {
 342                 set found 1
 343                 set error ""
 344                 if { $type ne "library file" } {
 345                     send_user "Using $filename as $type.\n"
 346                 } else {
 347                     verbose "Loading $filename"
 348                 }
 349                 if {[catch "uplevel #0 source $filename" error] == 1} {
 350                     global errorInfo
 351                     send_error "ERROR: tcl error sourcing $type $filename.\n$error\n"
 352                     if {[info exists errorInfo]} {
 353                         send_error "$errorInfo\n"
 354                     }
 355                     exit 1
 356                 }
 357                 break
 358             }
 359         }
 360         if { $found } {
 361             break
 362         }
 363     }
 364     return $found
 365 }
 366
 367 #
 368 # Give a usage statement.
 369 #
 370 proc usage { } {
 371     global tool
 372
 373     send_user "USAGE: runtest \[options...\]\n"
 374     send_user "\t--all, -a\t\tPrint all test output to screen\n"
 375     send_user "\t--build \[triplet\]\tThe canonical triplet of the build machine\n"
 376     send_user "\t--debug\t\t\tSet expect debugging ON\n"
 377     send_user "\t--directory name\tRun only the tests in directory 'name'\n"
 378     send_user "\t--global_init \[name\]\tThe file to load for global configuration\n"
 379     send_user "\t--help\t\t\tPrint help text\n"
 380     send_user "\t--host \[triplet\]\tThe canonical triplet of the host machine\n"
 381     send_user "\t--host_board \[name\]\tThe host board to use\n"
 382     send_user "\t--ignore \[name(s)\]\tThe names of specific tests to ignore\n"
 383     send_user "\t--local_init \[name\]\tThe file to load for local configuration\n"
 384     send_user "\t--log_dialog\t\t\Emit Expect output on stdout\n"
 385     send_user "\t--mail \[name(s)\]\tWhom to mail the results to\n"
 386     send_user "\t--objdir \[name\]\t\tThe test suite binary directory\n"
 387     send_user "\t--outdir \[name\]\t\tThe directory to put logs in\n"
 388     send_user "\t--reboot\t\tReboot the target (if supported)\n"
 389     send_user "\t--srcdir \[name\]\t\tThe test suite source code directory\n"
 390     send_user "\t--status\t\tSet the exit status to fail on Tcl errors\n"
 391     send_user "\t--strace \[number\]\tTurn on Expect tracing\n"
 392     send_user "\t--target \[triplet\]\tThe canonical triplet of the target board\n"
 393     send_user "\t--target_board \[name(s)\] The list of target boards to run tests on\n"
 394     send_user "\t--tool \[name(s)\]\tRun tests on these tools\n"
 395     send_user "\t--tool_exec \[name\]\tThe path to the tool executable to test\n"
 396     send_user "\t--tool_opts \[options\]\tA list of additional options to pass to the tool\n"
 397     send_user "\t--verbose, -v\t\tProduce verbose output\n"
 398     send_user "\t--version, -V\t\tPrint all relevant version numbers\n"
 399     send_user "\t--xml, -x\t\tWrite out an XML results file\n"
 400     send_user "\t--D\[0-1\]\t\tTcl debugger\n"
 401     send_user "\tscript.exp\[=arg(s)\]\tRun these tests only\n"
 402     if { [info exists tool] } {
 403         if { [info procs ${tool}_option_help] ne "" } {
 404             ${tool}_option_help
 405         }
 406     }
 407 }
 408
 409 #
 410 # Parse the arguments the first time looking for these.  We will ultimately
 411 # parse them twice.  Things are complicated because:
 412 # - we want to parse --verbose early on
 413 # - we don't want config files to override command line arguments
 414 #   (eg: $base_dir/$local_init_file vs --host/--target)
 415 # - we need some command line arguments before we can process some config files
 416 #   (eg: --objdir before $objdir/$local_init_file, --host/--target before $DEJAGNU)
 417 # The use of `arg_host_triplet' and `arg_target_triplet' lets us avoid parsing
 418 # the arguments three times.
 419 #
 420
 421 namespace eval ::dejagnu::command_line {
 422     variable cmd_var_list [list]
 423
 424     proc save_cmd_var {name} {
 425         variable cmd_var_list
 426
 427         upvar 1 $name target_var
 428         lappend cmd_var_list $name $target_var
 429     }
 430
 431     proc restore_cmd_vars {} {
 432         variable cmd_var_list
 433
 434         foreach {name value} $cmd_var_list {
 435             uplevel 1 set $name $value
 436         }
 437         verbose "Variables set by command line arguments restored." 4
 438     }
 439
 440     proc dump_cmd_vars {} {
 441         variable cmd_var_list
 442
 443         verbose "Variables set by command line arguments:" 4
 444         foreach {name value} $cmd_var_list {
 445             verbose "  $name -> $value" 4
 446         }
 447     }
 448 }
 449
 450 set arg_host_triplet ""
 451 set arg_target_triplet ""
 452 set arg_build_triplet ""
 453 set argc [ llength $argv ]
 454 for { set i 0 } { $i < $argc } { incr i } {
 455     set option [lindex $argv $i]
 456
 457     # make all options have two hyphens
 458     switch -glob -- $option {
 459         "--*" {
 460         }
 461         "-*" {
 462             set option "-$option"
 463         }
 464     }
 465
 466     # split out the argument for options that take them
 467     switch -glob -- $option {
 468         "--*=*" {
 469             regexp {^[^=]*=(.*)$} $option nil optarg
 470         }
 471         "--bu*" -
 472         "--g*" -
 473         "--ho*" -
 474         "--ig*"  -
 475         "--loc*" -
 476         "--m*"  -
 477         "--ob*" -
 478         "--ou*" -
 479         "--sr*" -
 480         "--str*" -
 481         "--ta*" -
 482         "--di*" -
 483         "--to*" {
 484             incr i
 485             set optarg [lindex $argv $i]
 486         }
 487     }
 488
 489     switch -glob -- $option {
 490         "--V*" -
 491         "--vers*" {                     # (--version) version numbers
 492             send_user "DejaGnu version\t$frame_version\n"
 493             send_user "Expect version\t[exp_version]\n"
 494             send_user "Tcl version\t[ info tclversion ]\n"
 495             exit 0
 496         }
 497
 498         "--bu*" {                       # (--build) the build host configuration
 499             set arg_build_triplet $optarg
 500             ::dejagnu::command_line::save_cmd_var arg_build_triplet
 501             continue
 502         }
 503
 504         "--g*" {                        # (--global_init) the global init file name
 505             set global_init_file $optarg
 506             ::dejagnu::command_line::save_cmd_var global_init_file
 507             continue
 508         }
 509
 510         "--host_bo*" {
 511             set host_board $optarg
 512             ::dejagnu::command_line::save_cmd_var host_board
 513             continue
 514         }
 515
 516         "--ho*" {                       # (--host) the host configuration
 517             set arg_host_triplet $optarg
 518             ::dejagnu::command_line::save_cmd_var arg_host_triplet
 519             continue
 520         }
 521
 522         "--loc*" {                      # (--local_init) the local init file name
 523             set local_init_file $optarg
 524             ::dejagnu::command_line::save_cmd_var local_init_file
 525             continue
 526         }
 527
 528         "--ob*" {                       # (--objdir) where the test case object code lives
 529             set objdir $optarg
 530             ::dejagnu::command_line::save_cmd_var objdir
 531             continue
 532         }
 533
 534         "--sr*" {                       # (--srcdir) where the testsuite source code lives
 535             set srcdir $optarg
 536             ::dejagnu::command_line::save_cmd_var srcdir
 537             continue
 538         }
 539
 540         "--target_bo*" {
 541             set target_list $optarg
 542             ::dejagnu::command_line::save_cmd_var target_list
 543             continue
 544         }
 545
 546         "--ta*" {                       # (--target) the target configuration
 547             set arg_target_triplet $optarg
 548             ::dejagnu::command_line::save_cmd_var arg_target_triplet
 549             continue
 550         }
 551
 552         "--tool_opt*" {
 553             set TOOL_OPTIONS $optarg
 554             ::dejagnu::command_line::save_cmd_var TOOL_OPTIONS
 555             continue
 556         }
 557
 558         "--tool_exec*" {
 559             set TOOL_EXECUTABLE $optarg
 560             ::dejagnu::command_line::save_cmd_var TOOL_EXECUTABLE
 561             continue
 562         }
 563
 564         "--to*" {                       # (--tool) specify tool name
 565             set tool $optarg
 566             set comm_line_tool $optarg
 567             ::dejagnu::command_line::save_cmd_var tool
 568             ::dejagnu::command_line::save_cmd_var comm_line_tool
 569             continue
 570         }
 571
 572         "--di*" {
 573             set cmdline_dir_to_run $optarg
 574             ::dejagnu::command_line::save_cmd_var cmdline_dir_to_run
 575             continue
 576         }
 577
 578         "--v" -
 579         "--verb*" {                     # (--verbose) verbose output
 580             incr verbose
 581             continue
 582         }
 583
 584         "[A-Z0-9_-.]*=*" { # process makefile style args like CC=gcc, etc...
 585             if {[regexp "^(\[A-Z0-9_-\]+)=(.*)$" $option junk var val]} {
 586                 set $var $val
 587                 verbose "$var is now $val"
 588                 append makevars "set $var $val;" ;# FIXME: Used anywhere?
 589                 unset junk var val
 590             } else {
 591                 send_error "Illegal variable specification:\n"
 592                 send_error "$option\n"
 593             }
 594             continue
 595         }
 596
 597     }
 598 }
 599 verbose "Verbose level is $verbose"
 600
 601 verbose [concat "Initial working directory is" [pwd]]
 602
 603 ::dejagnu::command_line::dump_cmd_vars
 604
 605 #
 606 # get the users login name
 607 #
 608 if { $logname eq "" } {
 609     if {[info exists env(USER)]} {
 610         set logname $env(USER)
 611     } else {
 612         if {[info exists env(LOGNAME)]} {
 613             set logname $env(LOGNAME)
 614         } else {
 615             # try getting it with whoami
 616             catch "set logname [exec whoami]" tmp
 617             if {[string match "*couldn't find*to execute*" $tmp]} {
 618                 # try getting it with who am i
 619                 unset tmp
 620                 catch "set logname [exec who am i]" tmp
 621                 if {[string match "*Command not found*" $tmp]} {
 622                     send_user "ERROR: couldn't get the users login name\n"
 623                     set logname "Unknown"
 624                 } else {
 625                     set logname [lindex [split $logname " !"] 1]
 626                 }
 627             }
 628         }
 629     }
 630 }
 631
 632 verbose "Login name is $logname"
 633
 634 #
 635 # lookfor_file -- try to find a file by searching up multiple directory levels
 636 #
 637 proc lookfor_file { dir name } {
 638     foreach x [list . .. ../.. ../../.. ../../../..] {
 639         verbose $dir/$x/$name 2
 640         if {[file exists [file join $dir $name]]} {
 641             return [file join $dir $name]
 642         }
 643         set dir [remote_file build dirname $dir]
 644     }
 645     return ""
 646 }
 647
 648 #
 649 # load_lib -- load a library by sourcing it
 650 #
 651 # If there a multiple files with the same name, stop after the first one found.
 652 # The order is first look in the install dir, then in a parallel dir in the
 653 # source tree (up one or two levels), then in the current dir.
 654 #
 655 proc load_lib { file } {
 656     global verbose execpath tool
 657     global libdir libdirs srcdir testsuitedir base_dir
 658     global loaded_libs
 659
 660     if {[info exists loaded_libs($file)]} {
 661         return
 662     }
 663
 664     set loaded_libs($file) ""
 665     set search_dirs [list ../lib $libdir $libdir/lib]
 666     lappend search_dirs [file dirname [file dirname $srcdir]]/dejagnu/lib
 667     lappend search_dirs $testsuitedir/lib
 668     lappend search_dirs $execpath/lib "."
 669     lappend search_dirs [file dirname [file dirname [file dirname $srcdir]]]/dejagnu/lib
 670     if {[info exists libdirs]} {
 671         lappend search_dirs $libdirs
 672     }
 673     if { [search_and_load_file "library file" $file $search_dirs ] == 0 } {
 674         send_error "ERROR: Couldn't find library file $file.\n"
 675         exit 1
 676     }
 677 }
 678
 679 #
 680 # Begin sourcing the config files.
 681 # All are sourced in order.
 682 #
 683 # Search order:
 684 #    (local)    $base_dir/$local_init_file -> $objdir/$local_init_file ->
 685 #    (global)   installed($global_init_file) -> $DEJAGNU -> $HOME/.dejagnurc
 686 #
 687 # For the normal case, we expect $base_dir/$local_init_file to set
 688 # host_triplet and target_triplet.
 689 #
 690
 691 load_file [file join $base_dir $local_init_file]
 692
 693 # Ensure that command line parameters override testsuite init files.
 694 ::dejagnu::command_line::restore_cmd_vars
 695
 696 #
 697 # If objdir didn't get set in $base_dir/$local_init_file, set it to
 698 # $base_dir.  Make sure we source $objdir/$local_init_file in case
 699 # $base_dir/$local_init_file doesn't exist and objdir was given on the
 700 # command line.
 701 #
 702
 703 if { $objdir eq "." || $objdir eq $srcdir } {
 704     set objdir $base_dir
 705 } else {
 706     load_file [file join $objdir $local_init_file]
 707 }
 708
 709 # Ensure that command line parameters override testsuite init files.
 710 ::dejagnu::command_line::restore_cmd_vars
 711
 712 #
 713 # Find the testsuite.
 714 #
 715
 716 # The DejaGnu manual has always stated that a testsuite must be in a
 717 # testsuite/ subdirectory.
 718
 719 verbose "Finding testsuite ..." 3
 720 verbose "\$base_dir -> $base_dir" 3
 721 verbose "\$srcdir -> $srcdir" 3
 722 verbose "\$objdir -> $objdir" 3
 723 verbose [concat "file tail \$srcdir -> " [file tail $srcdir]] 3
 724 verbose [concat "file join \$srcdir testsuite -> " \
 725              [file join $srcdir testsuite]] 3
 726 verbose [concat "file isdirectory [file join \$srcdir testsuite] -> " \
 727              [file isdirectory [file join $srcdir testsuite]]] 3
 728 verbose [concat "file tail \$base_dir -> " [file tail $base_dir]] 3
 729
 730 if { [file tail $srcdir] eq "testsuite" } {
 731     # Subdirectory case -- $srcdir includes testsuite/
 732     set testsuitedir $srcdir
 733     set testbuilddir $objdir
 734 } elseif { [file tail $srcdir] ne "testsuite"
 735            && [file isdirectory [file join $srcdir testsuite]] } {
 736     # Top-level case -- testsuite in $srcdir/testsuite/
 737     set testsuitedir [file join $srcdir testsuite]
 738     set testbuilddir [file join $objdir testsuite]
 739 } elseif { $srcdir eq "." && [file tail $base_dir] eq "testsuite" } {
 740     # Development scaffold case -- testsuite in ".", but "." is "testsuite"
 741     set testsuitedir $base_dir
 742     set testbuilddir $base_dir
 743 } else {
 744     if { $testsuitedir eq "testsuite" && $srcdir eq "." && $objdir eq "." } {
 745         # Broken legacy case -- testsuite not actually in testsuite/
 746         # Produce a warning, but continue.
 747         send_error "WARNING: testsuite is not in a testsuite/ directory.\n"
 748         set testsuitedir $srcdir
 749         set testbuilddir $objdir
 750     } else {
 751         # Custom case -- all variables are assumed to have been set correctly
 752     }
 753 }
 754
 755 verbose "Finding testsuite ... done" 3
 756
 757 # Well, this just demonstrates the real problem...
 758 if {![info exists tool_root_dir]} {
 759     set tool_root_dir [file dirname $objdir]
 760     if {[file exists [file join $tool_root_dir testsuite]]} {
 761         set tool_root_dir [file dirname $tool_root_dir]
 762     }
 763 }
 764
 765 verbose "Using test sources in $srcdir"
 766 verbose "Using test binaries in $objdir"
 767 verbose "Testsuite root is $testsuitedir"
 768 verbose "Tool root directory is $tool_root_dir"
 769
 770 set execpath [file dirname $argv0]
 771
 772 # The runtest.exp file is installed directly in libdir.
 773 # Conveniently, the source tree layout is the same as the installed libdir.
 774 set libdir [file dirname $argv0]
 775 if {[info exists env(DEJAGNULIBS)]} {
 776     set libdir $env(DEJAGNULIBS)
 777 }
 778 # list of extra search directories used by load_lib to look for libs
 779 set libdirs {}
 780
 781 verbose "Using $libdir to find libraries"
 782
 783 #
 784 # If the host or target was given on the command line, override the above
 785 # config files.  We allow $DEJAGNU to massage them though in case it would
 786 # ever want to do such a thing.
 787 #
 788 if { $arg_host_triplet ne "" } {
 789     set host_triplet $arg_host_triplet
 790 }
 791 if { $arg_build_triplet ne "" } {
 792     set build_triplet $arg_build_triplet
 793 }
 794
 795 # If we only specify --host, then that must be the build machine too,
 796 # and we're stuck using the old functionality of a simple cross test.
 797 if {[expr { $build_triplet eq ""  &&  $host_triplet ne "" } ]} {
 798     set build_triplet $host_triplet
 799 }
 800 # If we only specify --build, then we'll use that as the host too.
 801 if {[expr { $build_triplet ne "" && $host_triplet eq "" } ]} {
 802     set host_triplet $build_triplet
 803 }
 804 unset arg_host_triplet arg_build_triplet
 805
 806 #
 807 # If the build machine type hasn't been specified by now, use config.guess.
 808 #
 809
 810 if {[expr {$build_triplet eq "" && $host_triplet eq ""}]} {
 811     # find config.guess
 812     foreach dir [list $libdir $libdir/libexec $libdir/.. $execpath $srcdir $srcdir/.. $srcdir/../..] {
 813         verbose "Looking for $dir/config.guess" 2
 814         if {[file exists [file join $dir config.guess]]} {
 815             set config_guess [file join $dir config.guess]
 816             verbose "Found [file join $dir config.guess]"
 817             break
 818         }
 819     }
 820
 821     # get the canonical triplet
 822     if {![info exists config_guess]} {
 823         send_error "ERROR: Couldn't find config.guess program.\n"
 824         exit 1
 825     }
 826     if { [info exists ::env(CONFIG_SHELL)] } {
 827         if { [catch {exec $::env(CONFIG_SHELL) $config_guess} build_triplet] } {
 828             if { [lindex $::errorCode 0] eq "CHILDSTATUS" } {
 829                 send_error "ERROR: Running config.guess with\
 830                                         CONFIG_SHELL=$::env(CONFIG_SHELL)\
 831                                         exited on code\
 832                                         [lindex $::errorCode 2].\n"
 833             } else {
 834                 send_error "ERROR: Running config.guess with\
 835                                         CONFIG_SHELL=$::env(CONFIG_SHELL)\
 836                                         produced error:\n"
 837                 send_error "        $::errorCode\n"
 838             }
 839         }
 840     } elseif { [info exists ::env(SHELL)] } {
 841         if { [catch {exec $::env(SHELL) $config_guess} build_triplet] } {
 842             if { [lindex $::errorCode 0] eq "CHILDSTATUS" } {
 843                 send_error "ERROR: Running config.guess with\
 844                                         SHELL=$::env(SHELL)\
 845                                         exited on code\
 846                                         [lindex $::errorCode 2].\n"
 847             } else {
 848                 send_error "ERROR: Running config.guess with\
 849                                         SHELL=$::env(SHELL)\
 850                                         produced error:\n"
 851                 send_error "        $::errorCode\n"
 852             }
 853         }
 854     } else {
 855         if { [catch {exec $config_guess} build_triplet] } {
 856             if { [lindex $::errorCode 0] eq "CHILDSTATUS" } {
 857                 send_error "ERROR: Running config.guess exited on code\
 858                                         [lindex $::errorCode 2].\n"
 859             } else {
 860                 send_error "ERROR: Running config.guess produced error:\n"
 861                 send_error "        $::errorCode\n"
 862             }
 863         }
 864     }
 865     if { ![regexp -- {^[[:alnum:]_.]+(-[[:alnum:]_.]+)+$} $build_triplet] } {
 866         send_error "ERROR: Running config.guess produced bogus build triplet:\n"
 867         send_error "        $build_triplet\n"
 868         send_error "       (Perhaps you need to set CONFIG_SHELL or\
 869                                 SHELL in your environment\n"
 870         send_error "        to the absolute file name of a POSIX shell?)\n"
 871         exit 1
 872     }
 873     verbose "Assuming build host is $build_triplet"
 874     if { $host_triplet eq "" } {
 875         set host_triplet $build_triplet
 876     }
 877 }
 878
 879 #
 880 # Figure out the target. If the target hasn't been specified, then we have to
 881 # assume we are native.
 882 #
 883 if { $arg_target_triplet ne "" } {
 884     set target_triplet $arg_target_triplet
 885 } elseif { $target_triplet eq "" } {
 886     set target_triplet $build_triplet
 887     verbose "Assuming native target is $target_triplet" 2
 888 }
 889 unset arg_target_triplet
 890 #
 891 # Default target_alias to target_triplet.
 892 #
 893 if {![info exists target_alias]} {
 894     set target_alias $target_triplet
 895 }
 896
 897 proc get_local_hostname { } {
 898     if {[catch "info hostname" hb]} {
 899         set hb ""
 900     } else {
 901         regsub "\\..*$" $hb "" hb
 902     }
 903     verbose "hostname=$hb" 3
 904     return $hb
 905 }
 906
 907 #
 908 # We put these here so that they can be overridden later by site.exp or
 909 # friends.
 910 #
 911 # Set up the target as machine NAME. We also load base-config.exp as a
 912 # default configuration. The config files are sourced with the global
 913 # variable $board set to the name of the current target being defined.
 914 #
 915 proc setup_target_hook { whole_name name } {
 916     global board
 917     global host_board
 918
 919     if {[info exists host_board]} {
 920         set hb $host_board
 921     } else {
 922         set hb [get_local_hostname]
 923     }
 924
 925     set board $whole_name
 926
 927     global board_type
 928     set board_type "target"
 929
 930     load_config base-config.exp
 931     if {![load_board_description $name $whole_name $hb]} {
 932         if { $name ne "unix" } {
 933             perror "couldn't load description file for $name"
 934             exit 1
 935         } else {
 936             load_generic_config "unix"
 937         }
 938     }
 939
 940     if {[board_info $board exists generic_name]} {
 941         load_tool_target_config [board_info $board generic_name]
 942     }
 943
 944     unset board
 945     unset board_type
 946
 947     push_target $whole_name
 948
 949     if { [info procs ${whole_name}_init] ne "" } {
 950         ${whole_name}_init $whole_name
 951     }
 952
 953     if { ![isnative] && ![isremote target] } {
 954         global env build_triplet target_triplet
 955         if { (![info exists env(DEJAGNU)]) && ($build_triplet ne $target_triplet) } {
 956             warning "Assuming target board is the local machine (which is probably wrong).\nYou may need to set your DEJAGNU environment variable."
 957         }
 958     }
 959 }
 960
 961 #
 962 # Clean things up afterwards.
 963 #
 964 proc cleanup_target_hook { name } {
 965     global tool
 966     # Clean up the target board.
 967     if { [info procs ${name}_exit] ne "" } {
 968         ${name}_exit
 969     }
 970     # We also call the tool exit routine here.
 971     if {[info exists tool]} {
 972         if { [info procs ${tool}_exit] ne "" } {
 973             ${tool}_exit
 974         }
 975     }
 976     remote_close target
 977     pop_target
 978 }
 979
 980 proc setup_host_hook { name } {
 981     global board
 982     global board_info
 983     global board_type
 984
 985     set board $name
 986     set board_type "host"
 987
 988     load_board_description $name
 989     unset board
 990     unset board_type
 991     push_host $name
 992     if { [info procs ${name}_init] ne "" } {
 993         ${name}_init $name
 994     }
 995 }
 996
 997 proc setup_build_hook { name } {
 998     global board
 999     global board_info
1000     global board_type
1001
1002     set board $name
1003     set board_type "build"
1004
1005     load_board_description $name
1006     unset board
1007     unset board_type
1008     push_build $name
1009     if { [info procs ${name}_init] ne "" } {
1010         ${name}_init $name
1011     }
1012 }
1013
1014 #
1015 # Find and load the global config file if it exists.
1016 # The global config file is used to set the connect mode and other
1017 # parameters specific to each particular target.
1018 # These files assume the host and target have been set.
1019 #
1020
1021 if { [load_file -- [file join $libdir $global_init_file]] == 0 } {
1022     # If $DEJAGNU isn't set either then there isn't any global config file.
1023     # Warn the user as there really should be one.
1024     if { ! [info exists env(DEJAGNU)] } {
1025         send_error "WARNING: Couldn't find the global config file.\n"
1026     }
1027 }
1028
1029 if {[info exists env(DEJAGNU)]} {
1030     if { [load_file -- $env(DEJAGNU)] == 0 } {
1031         # It may seem odd to only issue a warning if there isn't a global
1032         # config file, but issue an error if $DEJAGNU is erroneously defined.
1033         # Since $DEJAGNU is set there is *supposed* to be a global config file,
1034         # so the current behaviour seems reasonable.
1035         send_error "ERROR: global config file $env(DEJAGNU) not found.\n"
1036         exit 1
1037     }
1038     if {![info exists boards_dir]} {
1039         set boards_dir "[file dirname $env(DEJAGNU)]/boards"
1040     }
1041 }
1042
1043 # Load user .dejagnurc file last as the ultimate override.
1044 load_file ~/.dejagnurc
1045
1046 if {![info exists boards_dir]} {
1047     set boards_dir ""
1048 }
1049
1050 #
1051 # parse out the config parts of the triplet name
1052 #
1053
1054 # build values
1055 if { $build_cpu eq "" } {
1056     regsub -- "-.*-.*" $build_triplet "" build_cpu
1057 }
1058 if { $build_vendor eq "" } {
1059     regsub -- "^\[a-z0-9\]*-" $build_triplet "" build_vendor
1060     regsub -- "-.*" $build_vendor "" build_vendor
1061 }
1062 if { $build_os eq "" } {
1063     regsub -- ".*-.*-" $build_triplet "" build_os
1064 }
1065
1066 # host values
1067 if { $host_cpu eq "" } {
1068     regsub -- "-.*-.*" $host_triplet "" host_cpu
1069 }
1070 if { $host_vendor eq "" } {
1071     regsub -- "^\[a-z0-9\]*-" $host_triplet "" host_vendor
1072     regsub -- "-.*" $host_vendor "" host_vendor
1073 }
1074 if { $host_os eq "" } {
1075     regsub -- ".*-.*-" $host_triplet "" host_os
1076 }
1077
1078 # target values
1079 if { $target_cpu eq "" } {
1080     regsub -- "-.*-.*" $target_triplet "" target_cpu
1081 }
1082 if { $target_vendor eq "" } {
1083     regsub -- "^\[a-z0-9\]*-" $target_triplet "" target_vendor
1084     regsub -- "-.*" $target_vendor "" target_vendor
1085 }
1086 if { $target_os eq "" } {
1087     regsub -- ".*-.*-" $target_triplet "" target_os
1088 }
1089
1090 #
1091 # Load the primary tool initialization file.
1092 #
1093
1094 proc load_tool_init { file } {
1095     global srcdir testsuitedir
1096     global loaded_libs
1097
1098     if {[info exists loaded_libs(tool/$file)]} {
1099         return
1100     }
1101
1102     set loaded_libs(tool/$file) ""
1103
1104     lappend searchpath [file join $testsuitedir lib tool]
1105     lappend searchpath [file join $testsuitedir lib]
1106     # for legacy testsuites that might have files in lib/ instead of
1107     # testsuite/lib/ in the package source tree; deprecated
1108     lappend searchpath [file join $srcdir lib]
1109
1110     if { ![search_and_load_file "tool init file" [list $file] $searchpath] } {
1111         warning "Couldn't find tool init file"
1112     }
1113 }
1114
1115 #
1116 # load the testing framework libraries
1117 #
1118 load_lib utils.exp
1119 load_lib framework.exp
1120 load_lib debugger.exp
1121 load_lib remote.exp
1122 load_lib target.exp
1123 load_lib targetdb.exp
1124 load_lib libgloss.exp
1125
1126 # Initialize the test counters and reset them to 0.
1127 init_testcounts
1128 reset_vars
1129
1130 #
1131 # Parse the command line arguments.
1132 #
1133
1134 # Load the tool initialization file. Allow the --tool option to override
1135 # what's set in the site.exp file.
1136 if {[info exists comm_line_tool]} {
1137     set tool $comm_line_tool
1138 }
1139
1140 if {[info exists tool]} {
1141     load_tool_init ${tool}.exp
1142 }
1143
1144 set argc [ llength $argv ]
1145 for { set i 0 } { $i < $argc } { incr i } {
1146     set option [ lindex $argv $i ]
1147
1148     # make all options have two hyphens
1149     switch -glob -- $option {
1150         "--*" {
1151         }
1152         "-*" {
1153             set option "-$option"
1154         }
1155     }
1156
1157     # split out the argument for options that take them
1158     switch -glob -- $option {
1159         "--*=*" {
1160             regexp {^[^=]*=(.*)$} $option nil optarg
1161         }
1162         "--bu*" -
1163         "--g*" -
1164         "--ho*" -
1165         "--ig*"  -
1166         "--loc*" -
1167         "--m*"  -
1168         "--ob*" -
1169         "--ou*" -
1170         "--sr*" -
1171         "--str*" -
1172         "--ta*" -
1173         "--di*" -
1174         "--to*" {
1175             incr i
1176             set optarg [lindex $argv $i]
1177         }
1178     }
1179
1180     switch -glob -- $option {
1181         "--v*" {                        # (--verbose) verbose output
1182             # Already parsed.
1183             continue
1184         }
1185
1186         "--g*" {                        # (--global_init) the global init file name
1187             # Already parsed (and no longer useful).  The file has been loaded.
1188             continue
1189         }
1190
1191         "--loc*" {                      # (--local_init) the local init file name
1192             # Already parsed (and no longer useful).  The file has been loaded.
1193             continue
1194         }
1195
1196         "--bu*" {                       # (--build) the build host configuration
1197             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1198             continue
1199         }
1200
1201         "--ho*" {                       # (--host) the host configuration
1202             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1203             continue
1204         }
1205
1206         "--target_bo*" {
1207             # Set it again, father knows best.
1208             set target_list $optarg
1209             continue
1210         }
1211
1212         "--ta*" {                       # (--target) the target configuration
1213             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1214             continue
1215         }
1216
1217         "--a*" {                        # (--all) print all test output to screen
1218             set all_flag 1
1219             verbose "Print all test output to screen"
1220             continue
1221         }
1222
1223         "--di*" {
1224             # Already parsed (and don't set again).  Let $DEJAGNU rename it.
1225             continue
1226         }
1227
1228
1229         "--de*" {                       # (--debug) expect internal debugging
1230             if {[file exists ./dbg.log]} {
1231                 catch [file delete -force -- dbg.log]
1232             }
1233             if { $verbose > 2 } {
1234                 exp_internal -f dbg.log 1
1235             } else {
1236                 exp_internal -f dbg.log 0
1237             }
1238             verbose "Expect Debugging is ON"
1239             continue
1240         }
1241
1242         "--D[01]" {                     # (-Debug) turn on Tcl debugger
1243             # The runtest shell script handles this option, but it
1244             # still appears in the options in the Tcl code.
1245             verbose "Tcl debugger is ON"
1246             continue
1247         }
1248
1249         "--m*" {                        # (--mail) mail the output
1250             set mailing_list $optarg
1251             set mail_logs 1
1252             verbose "Mail results to $mailing_list"
1253             continue
1254         }
1255
1256         "--r*" {                        # (--reboot) reboot the target
1257             set reboot 1
1258             verbose "Will reboot the target (if supported)"
1259             continue
1260         }
1261
1262         "--ob*" {                       # (--objdir) where the test case object code lives
1263             # Already parsed, but parse again to make sure command line
1264             # options override any config file.
1265             set objdir $optarg
1266             verbose "Using test binaries in $objdir"
1267             continue
1268         }
1269
1270         "--ou*" {                       # (--outdir) where to put the output files
1271             set outdir $optarg
1272             verbose "Test output put in $outdir"
1273             continue
1274         }
1275
1276         "--log_dialog*" {
1277             incr log_dialog
1278             continue
1279         }
1280
1281         "*.exp" {                       #  specify test names to run
1282             set all_runtests($option) ""
1283             verbose "Running only tests $option"
1284             continue
1285         }
1286
1287         "*.exp=*" {                     #  specify test names to run
1288             set tmp [split $option "="]
1289             set all_runtests([lindex $tmp 0]) [lindex $tmp 1]
1290             verbose "Running only tests $option"
1291             unset tmp
1292             continue
1293         }
1294
1295         "--ig*" {                       #  (--ignore) specify test names to exclude
1296             set ignoretests $optarg
1297             verbose "Ignoring test $ignoretests"
1298             continue
1299         }
1300
1301         "--sr*" {                       # (--srcdir) where the testsuite source code lives
1302             # Already parsed, but parse again to make sure command line
1303             # options override any config file.
1304
1305             set srcdir $optarg
1306             continue
1307         }
1308
1309         "--str*" {                      # (--strace) expect trace level
1310             set tracelevel $optarg
1311             strace $tracelevel
1312             verbose "Source Trace level is now $tracelevel"
1313             continue
1314         }
1315
1316         "--sta*" {                      # (--status) exit status flag
1317             # preserved for compatability, do nothing
1318             continue
1319         }
1320
1321         "--tool_opt*" {
1322             continue
1323         }
1324
1325         "--tool_exec*" {
1326             set TOOL_EXECUTABLE $optarg
1327             continue
1328         }
1329
1330         "--to*" {                       # (--tool) specify tool name
1331             set tool $optarg
1332             verbose "Testing $tool"
1333             continue
1334         }
1335
1336         "--x*" {
1337             set xml 1
1338             verbose "XML logging turned on"
1339             continue
1340         }
1341
1342         "--he*" {                       # (--help) help text
1343             usage
1344             exit 0
1345         }
1346
1347         "[A-Z0-9_-.]*=*" { # skip makefile style args like CC=gcc, etc... (processed in first pass)
1348             continue
1349         }
1350
1351         default {
1352             if {[info exists tool]} {
1353                 if { [info procs ${tool}_option_proc] ne "" } {
1354                     if {[${tool}_option_proc $option]} {
1355                         continue
1356                     }
1357                 }
1358             }
1359             send_error "\nIllegal Argument \"$option\"\n"
1360             send_error "try \"runtest --help\" for option list\n"
1361             exit 1
1362         }
1363     }
1364 }
1365
1366 #
1367 # check for a few crucial variables
1368 #
1369 if {![info exists tool]} {
1370     send_error "WARNING: No tool specified\n"
1371     set tool ""
1372 }
1373
1374 #
1375 # initialize a few Tcl variables to something other than their default
1376 #
1377 if { $verbose > 2 || $log_dialog } {
1378     log_user 1
1379 } else {
1380     log_user 0
1381 }
1382
1383 set timeout 10
1384
1385
1386
1387 #
1388 # open log files
1389 #
1390 open_logs
1391
1392 # print the config info
1393 clone_output "Test run by $logname on [timestamp -format %c]"
1394 if {[is3way]} {
1395     clone_output "Target is $target_triplet"
1396     clone_output "Host   is $host_triplet"
1397     clone_output "Build  is $build_triplet"
1398 } else {
1399     if {[isnative]} {
1400         clone_output "Native configuration is $target_triplet"
1401     } else {
1402         clone_output "Target is $target_triplet"
1403         clone_output "Host   is $host_triplet"
1404     }
1405 }
1406
1407 clone_output "\n\t\t=== $tool tests ===\n"
1408
1409 #
1410 # Look for the generic board configuration file. It searches in several
1411 # places: $libdir/config, $libdir/../config, and $boards_dir.
1412 #
1413
1414 proc load_generic_config { name } {
1415     global libdir
1416     global board
1417     global board_info
1418     global boards_dir
1419     global board_type
1420
1421     if {[info exists board]} {
1422         if {![info exists board_info($board,generic_name)]} {
1423             set board_info($board,generic_name) $name
1424         }
1425     }
1426
1427     if {[info exists board_type]} {
1428         set type "for $board_type"
1429     } else {
1430         set type ""
1431     }
1432
1433     set dirlist [concat $libdir/config [file dirname $libdir]/config $boards_dir]
1434     set result [search_and_load_file "generic interface file $type" $name.exp $dirlist]
1435
1436     return $result
1437 }
1438
1439 #
1440 # Load the tool-specific target description.
1441 #
1442 proc load_config { args } {
1443     global testsuitedir
1444
1445     set found 0
1446
1447     return [search_and_load_file "tool-and-target-specific interface file" $args [list $testsuitedir/config $testsuitedir/../config $testsuitedir/../../config $testsuitedir/../../../config]]
1448 }
1449
1450 #
1451 # Find the files that set up the configuration for the target. There
1452 # are assumed to be two of them; one defines a basic set of
1453 # functionality for the target that can be used by all tool
1454 # testsuites, and the other defines any necessary tool-specific
1455 # functionality. These files are loaded via load_config.
1456 #
1457 # These used to all be named $target_abbrev-$tool.exp, but as the
1458 # $tool variable goes away, it's now just $target_abbrev.exp.  First
1459 # we look for a file named with both the abbrev and the tool names.
1460 # Then we look for one named with just the abbrev name. Finally, we
1461 # look for a file called default, which is the default actions, as
1462 # some tools could be purely host based. Unknown is mostly for error
1463 # trapping.
1464 #
1465
1466 proc load_tool_target_config { name } {
1467     global target_os libdir testsuitedir
1468
1469     set found [load_config $name.exp $target_os.exp "default.exp" "unknown.exp"]
1470
1471     if { $found == 0 } {
1472         send_error "WARNING: Couldn't find tool config file for $name, using default.\n"
1473         # If we can't load the tool init file, this must be a simple natively hosted
1474         # test suite, so we use the default procs for Unix.
1475         if { [search_and_load_file "library file" default.exp [list $libdir $libdir/config [file dirname [file dirname $testsuitedir]]/dejagnu/config $testsuitedir/config . [file dirname [file dirname [file dirname $testsuitedir]]]/dejagnu/config]] == 0 } {
1476             send_error "ERROR: Couldn't find default tool init file.\n"
1477             exit 1
1478         }
1479     }
1480 }
1481
1482 #
1483 # Find the file that describes the machine specified by board_name.
1484 #
1485
1486 proc load_board_description { board_name args } {
1487     global libdir
1488     global board
1489     global board_info
1490     global boards_dir
1491     global board_type
1492
1493     set dejagnu ""
1494
1495     if { [llength $args] > 0 } {
1496         set whole_name [lindex $args 0]
1497     } else {
1498         set whole_name $board_name
1499     }
1500
1501     set board_info($whole_name,name) $whole_name
1502     if {![info exists board]} {
1503         set board $whole_name
1504         set board_set 1
1505     } else {
1506         set board_set 0
1507     }
1508
1509     set dirlist {}
1510     if { [llength $args] > 1 } {
1511         set suffix [lindex $args 1]
1512         if { $suffix ne "" } {
1513             foreach x $boards_dir {
1514                 lappend dirlist $x/$suffix
1515             }
1516             lappend dirlist $libdir/baseboards/$suffix
1517         }
1518     }
1519     set dirlist [concat $dirlist $boards_dir]
1520     lappend dirlist $libdir/baseboards
1521     verbose "dirlist is $dirlist"
1522     if {[info exists board_type]} {
1523         set type "for $board_type"
1524     } else {
1525         set type ""
1526     }
1527     if {![info exists board_info($whole_name,isremote)]} {
1528         set board_info($whole_name,isremote) 1
1529         if {[info exists board_type]} {
1530             if { $board_type eq "build" } {
1531                 set board_info($whole_name,isremote) 0
1532             }
1533         }
1534         if { $board_name eq [get_local_hostname] } {
1535             set board_info($whole_name,isremote) 0
1536         }
1537     }
1538     search_and_load_file "standard board description file $type" standard.exp $dirlist
1539     set found [search_and_load_file "board description file $type" $board_name.exp $dirlist]
1540     if { $board_set != 0 } {
1541         unset board
1542     }
1543
1544     return $found
1545 }
1546
1547 #
1548 # Find the base-level file that describes the machine specified by args. We
1549 # only look in one directory, $libdir/baseboards.
1550 #
1551
1552 proc load_base_board_description { board_name } {
1553     global libdir
1554     global board
1555     global board_info
1556     global board_type
1557
1558     set board_set 0
1559     set board_info($board_name,name) $board_name
1560     if {![info exists board]} {
1561         set board $board_name
1562         set board_set 1
1563     }
1564     if {[info exists board_type]} {
1565         set type "for $board_type"
1566     } else {
1567         set type ""
1568     }
1569     if {![info exists board_info($board_name,isremote)]} {
1570         set board_info($board_name,isremote) 1
1571         if {[info exists board_type]} {
1572             if { $board_type eq "build" } {
1573                 set board_info($board_name,isremote) 0
1574             }
1575         }
1576     }
1577
1578     if { $board_name eq [get_local_hostname] } {
1579         set board_info($board_name,isremote) 0
1580     }
1581     set found [search_and_load_file "board description file $type" $board_name.exp [list $libdir/baseboards]]
1582     if { $board_set != 0 } {
1583         unset board
1584     }
1585
1586     return $found
1587 }
1588
1589 #
1590 # Source the testcase in TEST_FILE_NAME.
1591 #
1592
1593 proc runtest { test_file_name } {
1594     global prms_id
1595     global bug_id
1596     global test_result
1597     global errcnt
1598     global errorCode
1599     global errorInfo
1600     global tool
1601     global testdir
1602
1603     clone_output "Running $test_file_name ..."
1604     set prms_id 0
1605     set bug_id  0
1606     set test_result ""
1607
1608     # set testdir so testsuite file -test has a starting point
1609     set testdir [file dirname $test_file_name]
1610
1611     if {[file exists $test_file_name]} {
1612         set timestart [timestamp]
1613
1614         if {[info exists tool]} {
1615             if { [info procs ${tool}_init] ne "" } {
1616                 ${tool}_init $test_file_name
1617             }
1618         }
1619
1620         if { [catch "uplevel #0 source $test_file_name" msg] == 1 } {
1621             # If we have a Tcl error, propagate the exit status so
1622             # that 'make' (if it invokes runtest) notices the error.
1623             global exit_status exit_error
1624             # exit error is set by the --status command line option
1625             if { $exit_status == 0 } {
1626                 set exit_status 2
1627             }
1628             set new_error [list $test_file_name $msg]
1629             # We can't call `perror' here, it resets `errorInfo'
1630             # before we want to look at it.  Also remember that perror
1631             # increments `errcnt'.  If we do call perror we'd have to
1632             # reset errcnt afterwards.
1633             clone_output "ERROR: tcl error sourcing $test_file_name."
1634             if {[info exists errorCode]} {
1635                 clone_output "ERROR: tcl error code $errorCode"
1636                 lappend new_error $errorCode
1637             } else {
1638                 lappend new_error [list]
1639             }
1640             if {[info exists errorInfo]} {
1641                 clone_output "ERROR: $errorInfo"
1642                 lappend new_error $errorInfo
1643                 unset errorInfo
1644             } else {
1645                 lappend new_error [list]
1646             }
1647             lappend ::dejagnu::error::list $new_error
1648             unresolved "testcase '$test_file_name' aborted due to Tcl error"
1649         }
1650
1651         if {[info exists tool]} {
1652             if { [info procs ${tool}_finish] ne "" } {
1653                 ${tool}_finish
1654             }
1655         }
1656         set timeend [timestamp]
1657         set timediff [expr {$timeend - $timestart}]
1658         verbose -log "testcase $test_file_name completed in $timediff seconds" 4
1659     } else {
1660         # This should never happen, but maybe if the file got removed
1661         # between the `find' above and here.
1662         perror "$test_file_name does not exist." 0
1663     }
1664 }
1665
1666 # Trap some signals so we know what's happening.  These replace the previous
1667 # ones because we've now loaded the library stuff.
1668 #
1669 if {![exp_debug]} {
1670     foreach sig {{SIGINT {interrupted by user} 130} \
1671                      {SIGQUIT {interrupted by user} 131} \
1672                      {SIGTERM {terminated} 143}} {
1673         set signal [lindex $sig 0]
1674         set str [lindex $sig 1]
1675         set code [lindex $sig 2]
1676         trap "send_error \"got a \[trap -name\] signal, $str \\n\"; set exit_status $code; log_and_exit;" $signal
1677         verbose "setting trap for $signal to $str" 1
1678     }
1679     unset signal str sig
1680 }
1681
1682 #
1683 # Given a list of targets, process any iterative lists.
1684 #
1685 proc process_target_variants { target_list } {
1686     set result {}
1687     foreach x $target_list {
1688         if {[regexp "\\(" $x]} {
1689             regsub {^.*\(([^()]*)\)$} $x {\1} variant_list
1690             regsub {\([^(]*$} $x "" x
1691             set list [process_target_variants $x]
1692             set result {}
1693             foreach x $list {
1694                 set result [concat $result [iterate_target_variants $x [split $variant_list ","]]]
1695             }
1696         } elseif {[regexp "\{" $x]} {
1697             regsub "^.*\{(\[^\{\}\]*)\}$" $x {\1} variant_list
1698             regsub "\{\[^\{\]*$" $x "" x
1699             set list [process_target_variants $x]
1700             foreach x $list {
1701                 foreach i [split $variant_list ","] {
1702                     set name $x
1703                     if { $i ne "" } {
1704                         append name "/" $i
1705                     }
1706                     lappend result $name
1707                 }
1708             }
1709         } else {
1710             lappend result $x
1711         }
1712     }
1713     return $result
1714 }
1715
1716 proc iterate_target_variants { target variants } {
1717     return [iterate_target_variants_two $target $target $variants]
1718 }
1719
1720 #
1721 # Given a list of variants, produce the list of all possible combinations.
1722 #
1723 proc iterate_target_variants_two { orig_target target variants } {
1724
1725     if { [llength $variants] == 0 } {
1726         return [list $target]
1727     } else {
1728         if { [llength $variants] > 1 } {
1729             set result [iterate_target_variants_two $orig_target $target [lrange $variants 1 end]]
1730         } else {
1731             if { $target ne $orig_target } {
1732                 set result [list $target]
1733             } else {
1734                 set result {}
1735             }
1736         }
1737         if { [lindex $variants 0] ne "" } {
1738             append target "/" [lindex $variants 0]
1739             return [concat $result [iterate_target_variants_two $orig_target $target [lrange $variants 1 end]]]
1740         } else {
1741             return [concat $result $target]
1742         }
1743     }
1744 }
1745
1746 setup_build_hook [get_local_hostname]
1747
1748 if {[info exists host_board]} {
1749     setup_host_hook $host_board
1750 } else {
1751     set hb [get_local_hostname]
1752     if { $hb ne "" } {
1753         setup_host_hook $hb
1754     }
1755 }
1756
1757 #
1758 # main test execution loop
1759 #
1760
1761 if {[info exists errorInfo]} {
1762     unset errorInfo
1763 }
1764
1765
1766 # make sure we have only single path delimiters
1767 regsub -all {([^/])//*} $srcdir {\1/} srcdir
1768 regsub -all {([^/])//*} $objdir {\1/} objdir
1769 regsub -all {([^/])//*} $testsuitedir {\1/} testsuitedir
1770 regsub -all {([^/])//*} $testbuilddir {\1/} testbuilddir
1771
1772 if {![info exists target_list]} {
1773     # Make sure there is at least one target machine. It's probably a Unix box,
1774     # but that's just a guess.
1775     set target_list { "unix" }
1776 } else {
1777     verbose "target list is $target_list"
1778 }
1779
1780 #
1781 # Iterate through the list of targets.
1782 #
1783 global current_target
1784
1785 set target_list [process_target_variants $target_list]
1786
1787 set target_count [llength $target_list]
1788
1789 clone_output "Schedule of variations:"
1790 foreach current_target $target_list {
1791     clone_output "    $current_target"
1792 }
1793 clone_output ""
1794
1795
1796 foreach current_target $target_list {
1797     verbose "target is $current_target"
1798     set current_target_name $current_target
1799     set tlist [split $current_target /]
1800     set current_target [lindex $tlist 0]
1801     set board_variant_list [lrange $tlist 1 end]
1802
1803     # Set the counts for this target to 0.
1804     reset_vars
1805     clone_output "Running target $current_target_name"
1806
1807     setup_target_hook $current_target_name $current_target
1808
1809     # If multiple passes requested, set them up.  Otherwise prepare just one.
1810     # The format of `MULTIPASS' is a list of elements containing
1811     # "{ name var1=value1 ... }" where `name' is a generic name for the pass and
1812     # currently has no other meaning.
1813
1814     global env
1815
1816     if { [info exists MULTIPASS] } {
1817         set multipass $MULTIPASS
1818     }
1819     if { $multipass eq "" } {
1820         set multipass { "" }
1821     }
1822
1823     # If PASS is specified, we want to run only the tests specified.
1824     # Its value should be a number or a list of numbers that specify
1825     # the passes that we want to run.
1826     if {[info exists PASS]} {
1827         set pass $PASS
1828     } else {
1829         set pass ""
1830     }
1831
1832     if {$pass ne ""} {
1833         set passes [list]
1834         foreach p $pass {
1835             foreach multipass_elem $multipass {
1836                 set multipass_name [lindex $multipass_elem 0]
1837                 if {$p == $multipass_name} {
1838                     lappend passes $multipass_elem
1839                     break
1840                 }
1841             }
1842         }
1843         set multipass $passes
1844     }
1845
1846     foreach pass $multipass {
1847
1848         # multipass_name is set for `record_test' to use (see framework.exp).
1849         if { [lindex $pass 0] ne "" } {
1850             set multipass_name [lindex $pass 0]
1851             clone_output "Running pass `$multipass_name' ..."
1852         } else {
1853             set multipass_name ""
1854         }
1855         set restore ""
1856         foreach varval [lrange $pass 1 end] {
1857             set tmp [string first "=" $varval]
1858             set var [string range $varval 0 [expr {$tmp - 1}]]
1859             # Save previous value.
1860             if {[info exists $var]} {
1861                 lappend restore "$var [list [eval concat \$$var]]"
1862             } else {
1863                 lappend restore $var
1864             }
1865             # Handle "CFLAGS=$CFLAGS foo".
1866             eval set $var \[string range \"$varval\" [expr {$tmp + 1}] end\]
1867             verbose "$var is now [eval concat \$$var]"
1868             unset tmp var
1869         }
1870
1871         # look for the top level testsuites. if $tool doesn't
1872         # exist and there are no subdirectories in $testsuitedir, then
1873         # we print a warning and default to srcdir.
1874         set test_top_dirs [lsort [getdirs -all $testsuitedir $tool*]]
1875         if { $test_top_dirs eq "" } {
1876             send_error "WARNING: could not find testsuite; trying $srcdir.\n"
1877             set test_top_dirs [list $srcdir]
1878         } else {
1879             # JYG:
1880             # DejaGNU's notion of test tree and test files is very
1881             # general:
1882             # given $testsuitedir and $tool, any subdirectory (at any
1883             # level deep) with the "$tool" prefix starts a test tree
1884             # given a test tree, any *.exp file underneath (at any
1885             # level deep) is a test file.
1886             #
1887             # For test tree layouts with $tool prefix on
1888             # both a parent and a child directory, we need to eliminate
1889             # the child directory entry from test_top_dirs list.
1890             # e.g. gdb.hp/gdb.base-hp/ would result in two entries
1891             # in the list: gdb.hp, gdb.hp/gdb.base-hp.
1892             # If the latter not eliminated, test files under
1893             # gdb.hp/gdb.base-hp would be run twice (since test files
1894             # are gathered from all sub-directories underneath a
1895             # directory).
1896             #
1897             # Since $tool may be g++, etc. which could confuse
1898             # regexp, we cannot do the simpler test:
1899             #     ...
1900             #     if [regexp "$testsuitedir/.*$tool.*/.*$tool.*" $dir]
1901             #     ...
1902             # instead, we rely on the fact that test_top_dirs is
1903             # a sorted list of entries, and any entry that contains
1904             # the previous valid test top dir entry in its own pathname
1905             # must be excluded.
1906
1907             set temp_top_dirs [list]
1908             set prev_dir ""
1909             foreach dir $test_top_dirs {
1910                 if { $prev_dir eq ""
1911                      || [string first $prev_dir/ $dir] == -1 } {
1912                     # the first top dir entry, or an entry that
1913                     # does not share the previous entry's entire
1914                     # pathname, record it as a valid top dir entry.
1915                     #
1916                     lappend temp_top_dirs $dir
1917                     set prev_dir $dir
1918                 }
1919             }
1920             set test_top_dirs $temp_top_dirs
1921         }
1922         verbose "Top level testsuite dirs are $test_top_dirs" 2
1923         set testlist ""
1924         if {[array exists all_runtests]} {
1925             foreach x [array names all_runtests] {
1926                 verbose "trying to glob $testsuitedir/$x" 2
1927                 set s [glob -nocomplain $testsuitedir/$x]
1928                 if { $s ne "" } {
1929                     set testlist [concat $testlist $s]
1930                 }
1931             }
1932         }
1933         #
1934         # If we have a list of tests, run all of them.
1935         #
1936         if { $testlist ne "" } {
1937             foreach test_name $testlist {
1938                 if { $ignoretests ne "" } {
1939                     if { 0 <= [lsearch $ignoretests [file tail $test_name]]} {
1940                         continue
1941                     }
1942                 }
1943
1944                 # set subdir to the tail of the dirname after $srcdir,
1945                 # for the driver files that want it.  XXX this is silly.
1946                 # drivers should get a single var, not $srcdir/$subdir
1947                 set subdir [relative_filename $srcdir \
1948                                 [file dirname $test_name]]
1949
1950                 # XXX not the right thing to do.
1951                 set runtests [list [file tail $test_name] ""]
1952
1953                 runtest $test_name
1954             }
1955         } else {
1956             #
1957             # Go digging for tests.
1958             #
1959             foreach dir $test_top_dirs {
1960                 if { $dir ne $testsuitedir } {
1961                     # Ignore this directory if is a directory to be
1962                     # ignored.
1963                     if {[info exists ignoredirs] && $ignoredirs ne ""} {
1964                         set found 0
1965                         foreach directory $ignoredirs {
1966                             if {[string match *$directory* $dir]} {
1967                                 set found 1
1968                                 break
1969                             }
1970                         }
1971                         if { $found } {
1972                             continue
1973                         }
1974                     }
1975
1976                     # Run the test if dir_to_run was specified as a
1977                     # value (for example in MULTIPASS) and the test
1978                     # directory matches that directory.
1979                     if {[info exists dir_to_run] && $dir_to_run ne ""} {
1980                         # JYG: dir_to_run might be a space delimited list
1981                         # of directories.  Look for match on each item.
1982                         set found 0
1983                         foreach directory $dir_to_run {
1984                             if {[string match *$directory* $dir]} {
1985                                 set found 1
1986                                 break
1987                             }
1988                         }
1989                         if {!$found} {
1990                             continue
1991                         }
1992                     }
1993
1994                     # Run the test if cmdline_dir_to_run was specified
1995                     # by the user using --directory and the test
1996                     # directory matches that directory
1997                     if {[info exists cmdline_dir_to_run] \
1998                             && $cmdline_dir_to_run ne ""} {
1999                         # JYG: cmdline_dir_to_run might be a space delimited
2000                         # list of directories.  Look for match on each item.
2001                         set found 0
2002                         foreach directory $cmdline_dir_to_run {
2003                             # Look for a directory that ends with the
2004                             # provided --directory name.
2005                             if {[string match $directory $dir]
2006                                 || [string match "*/$directory" $dir]} {
2007                                 set found 1
2008                                 break
2009                             }
2010                         }
2011                         if {!$found} {
2012                             continue
2013                         }
2014                     }
2015
2016                     foreach test_name [lsort [find $dir *.exp]] {
2017                         if { $test_name eq "" } {
2018                             continue
2019                         }
2020                         # Ignore this one if asked to.
2021                         if { $ignoretests ne "" } {
2022                             if { 0 <= [lsearch $ignoretests [file tail $test_name]]} {
2023                                 continue
2024                             }
2025                         }
2026
2027                         # Get the path after the $srcdir so we know
2028                         # the subdir we're in.
2029                         set subdir [relative_filename $srcdir \
2030                                         [file dirname $test_name]]
2031                         # Check to see if the range of tests is limited,
2032                         # set `runtests' to a list of two elements: the script name
2033                         # and any arguments ("" if none).
2034                         if {[array exists all_runtests]} {
2035                             verbose "searching for $test_name in [array names all_runtests]" 2
2036                             if { 0 > [lsearch [array names all_runtests] [file tail $test_name]]} {
2037                                 if { 0 > [lsearch [array names all_runtests] $test_name] } {
2038                                     continue
2039                                 }
2040                             }
2041                             set runtests [list [file tail $test_name] $all_runtests([file tail $test_name])]
2042                         } else {
2043                             set runtests [list [file tail $test_name] ""]
2044                         }
2045                         runtest $test_name
2046                     }
2047                 }
2048             }
2049         }
2050
2051         # Restore the variables set by this pass.
2052         foreach varval $restore {
2053             if { [llength $varval] > 1 } {
2054                 verbose "Restoring [lindex $varval 0] to [lindex $varval 1]" 4
2055                 set [lindex $varval 0] [lindex $varval 1]
2056             } else {
2057                 verbose "Restoring [lindex $varval 0] to `unset'" 4
2058                 unset -- [lindex $varval 0]
2059             }
2060         }
2061     }
2062     cleanup_target_hook $current_target
2063     if { $target_count > 1 } {
2064         log_summary
2065     }
2066 }
2067
2068 log_and_exit