silence warnings

[dfdiff.git] / usr.sbin / newsyslog / ptimes.c

/*-
 * ------+---------+---------+---------+---------+---------+---------+---------*
 * Initial version of parse8601 was originally added to newsyslog.c in
 *     FreeBSD on Jan 22, 1999 by Garrett Wollman <wollman@FreeBSD.org>.
 * Initial version of parseDWM was originally added to newsyslog.c in
 *     FreeBSD on Apr  4, 2000 by Hellmuth Michaelis <hm@FreeBSD.org>.
 *
 * Copyright (c) 2003  - Garance Alistair Drosehn <gad@FreeBSD.org>.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *   1. Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in the
 *      documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * The views and conclusions contained in the software and documentation
 * are those of the authors and should not be interpreted as representing
 * official policies, either expressed or implied, of the FreeBSD Project.
 *
 * ------+---------+---------+---------+---------+---------+---------+---------*
 * This is intended to be a set of general-purpose routines to process times.
 * Right now it probably still has a number of assumptions in it, such that
 * it works fine for newsyslog but might not work for other uses.
 * ------+---------+---------+---------+---------+---------+---------+---------*
 *
 * $FreeBSD: src/usr.sbin/newsyslog/ptimes.c,v 1.5 2004/06/07 21:53:27 gad Exp $
 * $DragonFly: src/usr.sbin/newsyslog/ptimes.c,v 1.1 2007/05/12 08:52:00 swildner Exp $
 */

#include <ctype.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>

#include "extern.h"

#define SECS_PER_HOUR   3600

/*
 * Bit-values which indicate which components of time were specified
 * by the string given to parse8601 or parseDWM.  These are needed to
 * calculate what time-in-the-future will match that string.
 */
#define TSPEC_YEAR              0x0001
#define TSPEC_MONTHOFYEAR       0x0002
#define TSPEC_LDAYOFMONTH       0x0004
#define TSPEC_DAYOFMONTH        0x0008
#define TSPEC_DAYOFWEEK         0x0010
#define TSPEC_HOUROFDAY         0x0020

#define TNYET_ADJ4DST           -10     /* DST has "not yet" been adjusted */

struct ptime_data {
        time_t           basesecs;      /* Base point for relative times */
        time_t           tsecs;         /* Time in seconds */
        struct tm        basetm;        /* Base Time expanded into fields */
        struct tm        tm;            /* Time expanded into fields */
        int              did_adj4dst;   /* Track calls to ptime_adjust4dst */
        int              parseopts;     /* Options given for parsing */
        int              tmspec;        /* Indicates which time fields had
                                         * been specified by the user */
};

static int       days_pmonth(int month, int year);
static int       parse8601(struct ptime_data *ptime, const char *str);
static int       parseDWM(struct ptime_data *ptime, const char *str);

/*
 * Simple routine to calculate the number of days in a given month.
 */
static int
days_pmonth(int month, int year)
{
        static const int mtab[] = {31, 28, 31, 30, 31, 30, 31, 31,
            30, 31, 30, 31};
        int ndays;

        ndays = mtab[month];

        if (month == 1) {
                /*
                 * We are usually called with a 'tm-year' value
                 * (ie, the value = the number of years past 1900).
                 */
                if (year < 1900)
                        year += 1900;
                if (year % 4 == 0) {
                        /*
                         * This is a leap year, as long as it is not a
                         * multiple of 100, or if it is a multiple of
                         * both 100 and 400.
                         */
                        if (year % 100 != 0)
                                ndays++;        /* not multiple of 100 */
                        else if (year % 400 == 0)
                                ndays++;        /* is multiple of 100 and 400 */
                }
        }
        return (ndays);
}

/*-
 * Parse a limited subset of ISO 8601. The specific format is as follows:
 *
 * [CC[YY[MM[DD]]]][THH[MM[SS]]]        (where `T' is the literal letter)
 *
 * We don't accept a timezone specification; missing fields (including timezone)
 * are defaulted to the current date but time zero.
 */
static int
parse8601(struct ptime_data *ptime, const char *s)
{
        char *t;
        long l;
        struct tm tm;

        l = strtol(s, &t, 10);
        if (l < 0 || l >= INT_MAX || (*t != '\0' && *t != 'T'))
                return (-1);

        /*
         * Now t points either to the end of the string (if no time was
         * provided) or to the letter `T' which separates date and time in
         * ISO 8601.  The pointer arithmetic is the same for either case.
         */
        tm = ptime->tm;
        ptime->tmspec = TSPEC_HOUROFDAY;
        switch (t - s) {
        case 8:
                tm.tm_year = ((l / 1000000) - 19) * 100;
                l = l % 1000000;
        case 6:
                ptime->tmspec |= TSPEC_YEAR;
                tm.tm_year -= tm.tm_year % 100;
                tm.tm_year += l / 10000;
                l = l % 10000;
        case 4:
                ptime->tmspec |= TSPEC_MONTHOFYEAR;
                tm.tm_mon = (l / 100) - 1;
                l = l % 100;
        case 2:
                ptime->tmspec |= TSPEC_DAYOFMONTH;
                tm.tm_mday = l;
        case 0:
                break;
        default:
                return (-1);
        }

        /* sanity check */
        if (tm.tm_year < 70 || tm.tm_mon < 0 || tm.tm_mon > 12
            || tm.tm_mday < 1 || tm.tm_mday > 31)
                return (-1);

        if (*t != '\0') {
                s = ++t;
                l = strtol(s, &t, 10);
                if (l < 0 || l >= INT_MAX || (*t != '\0' && !isspace(*t)))
                        return (-1);

                switch (t - s) {
                case 6:
                        tm.tm_sec = l % 100;
                        l /= 100;
                case 4:
                        tm.tm_min = l % 100;
                        l /= 100;
                case 2:
                        ptime->tmspec |= TSPEC_HOUROFDAY;
                        tm.tm_hour = l;
                case 0:
                        break;
                default:
                        return (-1);
                }

                /* sanity check */
                if (tm.tm_sec < 0 || tm.tm_sec > 60 || tm.tm_min < 0
                    || tm.tm_min > 59 || tm.tm_hour < 0 || tm.tm_hour > 23)
                        return (-1);
        }

        ptime->tm = tm;
        return (0);
}

/*-
 * Parse a cyclic time specification, the format is as follows:
 *
 *      [Dhh] or [Wd[Dhh]] or [Mdd[Dhh]]
 *
 * to rotate a logfile cyclic at
 *
 *      - every day (D) within a specific hour (hh)     (hh = 0...23)
 *      - once a week (W) at a specific day (d)     OR  (d = 0..6, 0 = Sunday)
 *      - once a month (M) at a specific day (d)        (d = 1..31,l|L)
 *
 * We don't accept a timezone specification; missing fields
 * are defaulted to the current date but time zero.
 */
static int
parseDWM(struct ptime_data *ptime, const char *s)
{
        int daysmon, Dseen, WMseen;
        const char *endval;
        char *tmp;
        long l;
        struct tm tm;

        /* Save away the number of days in this month */
        tm = ptime->tm;
        daysmon = days_pmonth(tm.tm_mon, tm.tm_year);

        WMseen = Dseen = 0;
        ptime->tmspec = TSPEC_HOUROFDAY;
        for (;;) {
                endval = NULL;
                switch (*s) {
                case 'D':
                        if (Dseen)
                                return (-1);
                        Dseen++;
                        ptime->tmspec |= TSPEC_HOUROFDAY;
                        s++;
                        l = strtol(s, &tmp, 10);
                        if (l < 0 || l > 23)
                                return (-1);
                        endval = tmp;
                        tm.tm_hour = l;
                        break;

                case 'W':
                        if (WMseen)
                                return (-1);
                        WMseen++;
                        ptime->tmspec |= TSPEC_DAYOFWEEK;
                        s++;
                        l = strtol(s, &tmp, 10);
                        if (l < 0 || l > 6)
                                return (-1);
                        endval = tmp;
                        if (l != tm.tm_wday) {
                                int save;

                                if (l < tm.tm_wday) {
                                        save = 6 - tm.tm_wday;
                                        save += (l + 1);
                                } else {
                                        save = l - tm.tm_wday;
                                }

                                tm.tm_mday += save;

                                if (tm.tm_mday > daysmon) {
                                        tm.tm_mon++;
                                        tm.tm_mday = tm.tm_mday - daysmon;
                                }
                        }
                        break;

                case 'M':
                        if (WMseen)
                                return (-1);
                        WMseen++;
                        ptime->tmspec |= TSPEC_DAYOFMONTH;
                        s++;
                        if (tolower(*s) == 'l') {
                                /* User wants the last day of the month. */
                                ptime->tmspec |= TSPEC_LDAYOFMONTH;
                                tm.tm_mday = daysmon;
                                endval = s + 1;
                        } else {
                                l = strtol(s, &tmp, 10);
                                if (l < 1 || l > 31)
                                        return (-1);

                                if (l > daysmon)
                                        return (-1);
                                endval = tmp;
                                tm.tm_mday = l;
                        }
                        break;

                default:
                        return (-1);
                        break;
                }

                if (endval == NULL)
                        return (-1);
                else if (*endval == '\0' || isspace(*endval))
                        break;
                else
                        s = endval;
        }

        ptime->tm = tm;
        return (0);
}

/*
 * Initialize a new ptime-related data area.
 */
struct ptime_data *
ptime_init(const struct ptime_data *optsrc)
{
        struct ptime_data *newdata;

        newdata = malloc(sizeof(struct ptime_data));
        if (optsrc != NULL) {
                memcpy(newdata, optsrc, sizeof(struct ptime_data));
        } else {
                memset(newdata, '\0', sizeof(struct ptime_data));
                newdata->did_adj4dst = TNYET_ADJ4DST;
        }

        return (newdata);
}

/*
 * Adjust a given time if that time is in a different timezone than
 * some other time.
 */
int
ptime_adjust4dst(struct ptime_data *ptime, const struct ptime_data *dstsrc)
{
        struct ptime_data adjtim;

        if (ptime == NULL)
                return (-1);

        /*
         * Changes are not made to the given time until after all
         * of the calculations have been successful.
         */
        adjtim = *ptime;

        /* Check to see if this adjustment was already made */
        if ((adjtim.did_adj4dst != TNYET_ADJ4DST) &&
            (adjtim.did_adj4dst == dstsrc->tm.tm_isdst))
                return (0);             /* yes, so don't make it twice */

        /* See if daylight-saving has changed between the two times. */
        if (dstsrc->tm.tm_isdst != adjtim.tm.tm_isdst) {
                if (adjtim.tm.tm_isdst == 1)
                        adjtim.tsecs -= SECS_PER_HOUR;
                else if (adjtim.tm.tm_isdst == 0)
                        adjtim.tsecs += SECS_PER_HOUR;
                adjtim.tm = *(localtime(&adjtim.tsecs));
                /* Remember that this adjustment has been made */
                adjtim.did_adj4dst = dstsrc->tm.tm_isdst;
                /*
                 * XXX - Should probably check to see if changing the
                 *      hour also changed the value of is_dst.  What
                 *      should we do in that case?
                 */
        }

        *ptime = adjtim;
        return (0);
}

int
ptime_relparse(struct ptime_data *ptime, int parseopts, time_t basetime,
    const char *str)
{
        int dpm, pres;
        struct tm temp_tm;

        ptime->parseopts = parseopts;
        ptime->basesecs = basetime;
        ptime->basetm = *(localtime(&ptime->basesecs));
        ptime->tm = ptime->basetm;
        ptime->tm.tm_hour = ptime->tm.tm_min = ptime->tm.tm_sec = 0;

        /*
         * Call a routine which sets ptime.tm and ptime.tspecs based
         * on the given string and parsing-options.  Note that the
         * routine should not call mktime to set ptime.tsecs.
         */
        if (parseopts & PTM_PARSE_DWM)
                pres = parseDWM(ptime, str);
        else
                pres = parse8601(ptime, str);
        if (pres < 0) {
                ptime->tsecs = (time_t)pres;
                return (pres);
        }

        /*
         * Before calling mktime, check to see if we ended up with a
         * "day-of-month" that does not exist in the selected month.
         * If we did call mktime with that info, then mktime will
         * make it look like the user specifically requested a day
         * in the following month (eg: Feb 31 turns into Mar 3rd).
         */
        dpm = days_pmonth(ptime->tm.tm_mon, ptime->tm.tm_year);
        if ((parseopts & PTM_PARSE_MATCHDOM) &&
            (ptime->tmspec & TSPEC_DAYOFMONTH) &&
            (ptime->tm.tm_mday> dpm)) {
                /*
                 * ptime_nxtime() will want a ptime->tsecs value,
                 * but we need to avoid mktime resetting all the
                 * ptime->tm values.
                 */
                if (verbose && dbg_at_times > 1)
                        fprintf(stderr,
                            "\t-- dom fixed: %4d/%02d/%02d %02d:%02d (%02d)",
                            ptime->tm.tm_year, ptime->tm.tm_mon,
                            ptime->tm.tm_mday, ptime->tm.tm_hour,
                            ptime->tm.tm_min, dpm);
                temp_tm = ptime->tm;
                ptime->tsecs = mktime(&temp_tm);
                if (ptime->tsecs > (time_t)-1)
                        ptimeset_nxtime(ptime);
                if (verbose && dbg_at_times > 1)
                        fprintf(stderr,
                            " to: %4d/%02d/%02d %02d:%02d\n",
                            ptime->tm.tm_year, ptime->tm.tm_mon,
                            ptime->tm.tm_mday, ptime->tm.tm_hour,
                            ptime->tm.tm_min);
        }

        /*
         * Convert the ptime.tm into standard time_t seconds.  Check
         * for invalid times, which includes things like the hour lost
         * when switching from "standard time" to "daylight saving".
         */
        ptime->tsecs = mktime(&ptime->tm);
        if (ptime->tsecs == (time_t)-1) {
                ptime->tsecs = (time_t)-2;
                return (-2);
        }

        return (0);
}

int
ptime_free(struct ptime_data *ptime)
{

        if (ptime == NULL)
                return (-1);

        free(ptime);
        return (0);
}

/*
 * Some trivial routines so ptime_data can remain a completely
 * opaque type.
 */
const char *
ptimeget_ctime(const struct ptime_data *ptime)
{

        if (ptime == NULL)
                return ("Null time in ptimeget_ctime()\n");

        return (ctime(&ptime->tsecs));
}

double
ptimeget_diff(const struct ptime_data *minuend, const struct
    ptime_data *subtrahend)
{

        /* Just like difftime(), we have no good error-return */
        if (minuend == NULL || subtrahend == NULL)
                return (0.0);

        return (difftime(minuend->tsecs, subtrahend->tsecs));
}

time_t
ptimeget_secs(const struct ptime_data *ptime)
{

        if (ptime == NULL)
                return (-1);

        return (ptime->tsecs);
}

/*
 * Generate an approximate timestamp for the next event, based on
 * what parts of time were specified by the original parameter to
 * ptime_relparse(). The result may be -1 if there is no obvious
 * "next time" which will work.
 */
int
ptimeset_nxtime(struct ptime_data *ptime)
{
        int moredays, tdpm, tmon, tyear;
        struct ptime_data nextmatch;

        if (ptime == NULL)
                return (-1);

        /*
         * Changes are not made to the given time until after all
         * of the calculations have been successful.
         */
        nextmatch = *ptime;
        /*
         * If the user specified a year and we're already past that
         * time, then there will never be another one!
         */
        if (ptime->tmspec & TSPEC_YEAR)
                return (-1);

        /*
         * The caller gave us a time in the past.  Calculate how much
         * time is needed to go from that valid rotate time to the
         * next valid rotate time.  We only need to get to the nearest
         * hour, because newsyslog is only run once per hour.
         */
        moredays = 0;
        if (ptime->tmspec & TSPEC_MONTHOFYEAR) {
                /* Special case: Feb 29th does not happen every year. */
                if (ptime->tm.tm_mon == 1 && ptime->tm.tm_mday == 29) {
                        nextmatch.tm.tm_year += 4;
                        if (days_pmonth(1, nextmatch.tm.tm_year) < 29)
                                nextmatch.tm.tm_year += 4;
                } else {
                        nextmatch.tm.tm_year += 1;
                }
                nextmatch.tm.tm_isdst = -1;
                nextmatch.tsecs = mktime(&nextmatch.tm);

        } else if (ptime->tmspec & TSPEC_LDAYOFMONTH) {
                /*
                 * Need to get to the last day of next month.  Origtm is
                 * already at the last day of this month, so just add to
                 * it number of days in the next month.
                 */
                if (ptime->tm.tm_mon < 11)
                        moredays = days_pmonth(ptime->tm.tm_mon + 1,
                            ptime->tm.tm_year);
                else
                        moredays = days_pmonth(0, ptime->tm.tm_year + 1);

        } else if (ptime->tmspec & TSPEC_DAYOFMONTH) {
                /* Jump to the same day in the next month */
                moredays = days_pmonth(ptime->tm.tm_mon, ptime->tm.tm_year);
                /*
                 * In some cases, the next month may not *have* the
                 * desired day-of-the-month.  If that happens, then
                 * move to the next month that does have enough days.
                 */
                tmon = ptime->tm.tm_mon;
                tyear = ptime->tm.tm_year;
                for (;;) {
                        if (tmon < 11)
                                tmon += 1;
                        else {
                                tmon = 0;
                                tyear += 1;
                        }
                        tdpm = days_pmonth(tmon, tyear);
                        if (tdpm >= ptime->tm.tm_mday)
                                break;
                        moredays += tdpm;
                }

        } else if (ptime->tmspec & TSPEC_DAYOFWEEK) {
                moredays = 7;
        } else if (ptime->tmspec & TSPEC_HOUROFDAY) {
                moredays = 1;
        }

        if (moredays != 0) {
                nextmatch.tsecs += SECS_PER_HOUR * 24 * moredays;
                nextmatch.tm = *(localtime(&nextmatch.tsecs));
        }

        /*
         * The new time will need to be adjusted if the setting of
         * daylight-saving has changed between the two times.
         */
        ptime_adjust4dst(&nextmatch, ptime);

        /* Everything worked.  Update the given time and return. */
        *ptime = nextmatch;
        return (0);
}

int
ptimeset_time(struct ptime_data *ptime, time_t secs)
{

        if (ptime == NULL)
                return (-1);

        ptime->tsecs = secs;
        ptime->tm = *(localtime(&ptime->tsecs));
        ptime->parseopts = 0;
        /* ptime->tmspec = ? */
        return (0);
}