| blob | 97cbf2f91cd73c5752b1b2c3a76478ec53902690 |
1 #
2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
3 #
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
6 #
7 # $DragonFly: src/sys/config/GENERIC,v 1.52 2007/06/09 17:56:27 swildner Exp $
9 platform pc32
10 machine i386
11 machine_arch i386
12 cpu I386_CPU
13 cpu I486_CPU
14 cpu I586_CPU
15 cpu I686_CPU
16 ident GENERIC
17 maxusers 0
19 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
21 options MATH_EMULATE #Support for x87 emulation
22 options INET #InterNETworking
23 options INET6 #IPv6 communications protocols
24 options FFS #Berkeley Fast Filesystem
25 options FFS_ROOT #FFS usable as root device [keep this!]
26 options SOFTUPDATES #Enable FFS soft updates support
27 options UFS_DIRHASH #Improve performance on big directories
28 options MFS #Memory Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
56 # To make an SMP kernel both SMP and APIC_IO are usually
57 # specified. SMP boxes with severely broken BIOSes which
58 # boot fine for non-SMP builds *might* work in SMP mode
59 # if you define SMP and leave APIC_IO turned off.
60 #
61 #options SMP # Symmetric MultiProcessor Kernel
62 #options APIC_IO # Symmetric (APIC) I/O
64 # Debugging for Development
65 options DDB
66 options DDB_TRACE
67 options INVARIANTS
69 # ACPI options
70 #options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
72 device isa
73 device eisa
74 device pci
76 # Floppy drives
77 device fdc0 at isa? port IO_FD1 irq 6 drq 2
78 device fd0 at fdc0 drive 0
79 device fd1 at fdc0 drive 1
80 #
81 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
82 # don't use the above line for fdc0 but the following one:
83 #device fdc0
85 # NEW-ATA (NATA) and ATAPI devices
86 #
87 device nata
88 device natadisk # ATA disk drives
89 device natapicd # ATAPI CDROM drives
90 device natapifd # ATAPI floppy drives
91 device natapist # ATAPI tape drives
92 device natapicam # Emulate ATAPI devices as SCSI
93 device nataraid # support for ATA software RAID
94 # controllers
95 device natausb # ATA-over-USB support
96 options ATA_STATIC_ID # Static device numbering
97 options PCI_MAP_FIXUP # Needed for NATA
99 # LEGACY ATA and ATAPI devices
100 #device ata0 at isa? port IO_WD1 irq 14
101 #device ata1 at isa? port IO_WD2 irq 15
102 #device ata
103 #device atadisk # ATA disk drives
104 #device atapicd # ATAPI CDROM drives
105 #device atapifd # ATAPI floppy drives
106 #device atapist # ATAPI tape drives
107 #device atapicam # Emulate ATAPI devices as SCSI via CAM
108 #options ATA_STATIC_ID #Static device numbering
110 # SCSI Controllers
111 device ahb # EISA AHA1742 family
112 device ahc # AHA2940 and onboard AIC7xxx devices
113 device ahd # AHA39320/29320 and onboard AIC79xx devices
114 device amd # AMD 53C974 (Tekram DC-390(T))
115 device isp # Qlogic family
116 device mpt # LSI-Logic MPT/Fusion
117 device ncr # NCR/Symbios Logic
118 device sym # NCR/Symbios Logic (newer chipsets)
119 options SYM_SETUP_LP_PROBE_MAP=0x40
120 # Allow ncr to attach legacy NCR devices when
121 # both sym and ncr are configured
123 device adv0 at isa?
124 device adw
125 device bt0 at isa?
126 device aha0 at isa?
127 device aic0 at isa?
129 device ncv # NCR 53C500
130 device nsp # Workbit Ninja SCSI-3
131 device stg # TMC 18C30/18C50
133 # SCSI peripherals
134 device scbus # SCSI bus (required)
135 device da # Direct Access (disks)
136 device sa # Sequential Access (tape etc)
137 device cd # CD
138 device pass # Passthrough device (direct SCSI access)
140 # RAID controllers interfaced to the SCSI subsystem
141 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
142 device dpt # DPT Smartcache - See LINT for options!
143 device iir # Intel Integrated RAID
144 device mly # Mylex AcceleRAID/eXtremeRAID
145 device ciss # Compaq SmartRAID 5* series
147 # RAID controllers
148 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
149 #device aacp # SCSI passthrough for aac (requires CAM)
150 device ida # Compaq Smart RAID
151 device ips # IBM ServeRAID
152 device amr # AMI MegaRAID
153 device mlx # Mylex DAC960 family
154 device twe # 3ware Escalade 7000/8000's
155 device twa # 3ware Escalade 9000's
156 device pst # Promise Supertrack
158 # atkbdc0 controls both the keyboard and the PS/2 mouse
159 device atkbdc0 at isa? port IO_KBD
160 device atkbd0 at atkbdc? irq 1 flags 0x1
161 device psm0 at atkbdc? irq 12
163 device vga0 at isa?
165 # splash screen/screen saver
166 pseudo-device splash
168 # syscons is the default console driver, resembling an SCO console
169 device sc0 at isa? flags 0x100
170 options SC_PIXEL_MODE # add support for the raster text mode
172 device agp # support several AGP chipsets
174 # Floating point support - do not disable.
175 device npx0 at nexus? port IO_NPX irq 13
177 # Power management support (see LINT for more options)
178 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
180 # PCCARD (PCMCIA) support
181 device pccard
182 device cardbus
183 device cbb
185 # Serial (COM) ports
186 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
187 device sio1 at isa? port IO_COM2 irq 3
188 device sio2 at isa? disable port IO_COM3 irq 5
189 device sio3 at isa? disable port IO_COM4 irq 9
191 # Parallel port
192 device ppc0 at isa? irq 7
193 device ppbus # Parallel port bus (required)
194 device lpt # Printer
195 device plip # TCP/IP over parallel
196 device ppi # Parallel port interface device
197 #device vpo # Requires scbus and da
200 # PCI Ethernet NICs.
201 device de # DEC/Intel DC21x4x (``Tulip'')
202 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
203 device txp # 3Com 3cR990 (``Typhoon'')
204 device vx # 3Com 3c590, 3c595 (``Vortex'')
206 # PCI Ethernet NICs that use the common MII bus controller code.
207 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
208 device miibus # MII bus support
209 device bce # Broadcom NetXtreme II Gigabit Ethernet
210 device bfe # Broadcom BCM440x 10/100 Ethernet
211 device dc # DEC/Intel 21143 and various workalikes
212 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
213 device pcn # AMD Am79C97x PCI 10/100 NICs
214 device rl # RealTek 8129/8139
215 device re # RealTek 8139C+/8169
216 device sf # Adaptec AIC-6915 (``Starfire'')
217 device sis # Silicon Integrated Systems SiS 900/SiS 7016
218 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
219 device ste # Sundance ST201 (D-Link DFE-550TX)
220 device tl # Texas Instruments ThunderLAN
221 device tx # SMC EtherPower II (83c170 ``EPIC'')
222 device vge # VIA 612x GigE
223 device vr # VIA Rhine, Rhine II
224 device wb # Winbond W89C840F
225 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
226 device bge # Broadcom BCM570x (``Tigon III'')
227 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
229 # ISA Ethernet NICs.
230 # 'device ed' requires 'device miibus'
231 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
232 device ex
233 device ep
234 device fe0 at isa? disable port 0x300
235 # Xircom Ethernet
236 device xe
238 # Wireless NIC cards
239 device wlan # 802.11 support
240 device wlan_ccmp # 802.11 CCMP support
241 device wlan_tkip # 802.11 TKIP support
242 device wlan_wep # 802.11 WEP support
243 # 802.11 TX rate control algorithms
244 #device wlan_ratectl_amrr # AMRR
245 device wlan_ratectl_onoe # Onoe
246 device wlan_ratectl_sample # Sample
248 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
249 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
250 # mode (the factory default). If you set the switches on your ISA
251 # card for a manually chosen I/O address and IRQ, you must specify
252 # those parameters here.
253 device an
254 device awi # PRISM I IEEE 802.11b wireless NIC
255 device ral # Ralink Technology 802.11 wireless NIC
256 # Requires wlan_ratectl_onoe and
257 # wlan_ratectl_sample
258 device rtw # RealTek 802.11 wireless NIC
259 # Requires wlan_ratectl_onoe and wlan_wep
260 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
261 # exists only as a PCMCIA device, so there is no ISA attachment needed
262 # and resources will always be dynamically assigned by the pccard code.
263 device wi
265 # The probe order of these is presently determined by i386/isa/isa_compat.c.
266 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
267 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
268 device lnc0 at isa? disable port 0x280 irq 10 drq 0
269 device cs0 at isa? disable port 0x300
270 device sn0 at isa? disable port 0x300 irq 10
272 # Pseudo devices - the number indicates how many units to allocate.
273 pseudo-device loop # Network loopback
274 pseudo-device ether # Ethernet support
275 pseudo-device sl 1 # Kernel SLIP
276 pseudo-device ppp 1 # Kernel PPP
277 pseudo-device tun # Packet tunnel.
278 pseudo-device pty # Pseudo-ttys (telnet etc)
279 pseudo-device md # Memory "disks"
280 pseudo-device gif # IPv6 and IPv4 tunneling
281 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
283 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
284 # Be aware of the administrative consequences of enabling this!
285 pseudo-device bpf #Berkeley packet filter
287 pseudo-device crypto # core crypto support, used by wlan
289 # USB support
290 device uhci # UHCI PCI->USB interface
291 device ohci # OHCI PCI->USB interface
292 device usb # USB Bus (required)
293 device ugen # Generic
294 device uhid # "Human Interface Devices"
295 device ukbd # Keyboard
296 device ulpt # Printer
297 device umass # Disks/Mass storage - Requires scbus and da
298 device ums # Mouse
299 device uscanner # Scanners
300 device urio # Diamond Rio MP3 Player
301 # USB Ethernet, requires mii
302 device aue # ADMtek USB ethernet
303 device axe # ASIX Electronics USB Ethernet
304 device cue # CATC USB ethernet
305 device kue # Kawasaki LSI USB ethernet
306 device rue # RealTek 8150 based USB ethernet
307 # USB wireless NICs, requires wlan, wlan_ratectl_onoe
308 device rum # Ralink Technology RT2501USB/RT2601USB
309 device ural # Ralink Technology RT2500USB
311 # FireWire support
312 device firewire # FireWire bus code
313 device sbp # SCSI over FireWire (Requires scbus and da)
314 device fwe # Ethernet over FireWire (non-standard!)