arch/arc/boot/dts/hsdk.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
   4  */
   5
   6 /*
   7  * Device Tree for ARC HS Development Kit
   8  */
   9 /dts-v1/;
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/reset/snps,hsdk-reset.h>
  13
  14 / {
  15         model = "snps,hsdk";
  16         compatible = "snps,hsdk";
  17
  18         #address-cells = <2>;
  19         #size-cells = <2>;
  20
  21         chosen {
  22                 bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
  23         };
  24
  25         aliases {
  26                 ethernet = &gmac;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 cpu@0 {
  34                         device_type = "cpu";
  35                         compatible = "snps,archs38";
  36                         reg = <0>;
  37                         clocks = <&core_clk>;
  38                 };
  39
  40                 cpu@1 {
  41                         device_type = "cpu";
  42                         compatible = "snps,archs38";
  43                         reg = <1>;
  44                         clocks = <&core_clk>;
  45                 };
  46
  47                 cpu@2 {
  48                         device_type = "cpu";
  49                         compatible = "snps,archs38";
  50                         reg = <2>;
  51                         clocks = <&core_clk>;
  52                 };
  53
  54                 cpu@3 {
  55                         device_type = "cpu";
  56                         compatible = "snps,archs38";
  57                         reg = <3>;
  58                         clocks = <&core_clk>;
  59                 };
  60         };
  61
  62         input_clk: input-clk {
  63                 #clock-cells = <0>;
  64                 compatible = "fixed-clock";
  65                 clock-frequency = <33333333>;
  66         };
  67
  68         reg_5v0: regulator-5v0 {
  69                 compatible = "regulator-fixed";
  70
  71                 regulator-name = "5v0-supply";
  72                 regulator-min-microvolt = <5000000>;
  73                 regulator-max-microvolt = <5000000>;
  74         };
  75
  76         cpu_intc: cpu-interrupt-controller {
  77                 compatible = "snps,archs-intc";
  78                 interrupt-controller;
  79                 #interrupt-cells = <1>;
  80         };
  81
  82         idu_intc: idu-interrupt-controller {
  83                 compatible = "snps,archs-idu-intc";
  84                 interrupt-controller;
  85                 #interrupt-cells = <1>;
  86                 interrupt-parent = <&cpu_intc>;
  87         };
  88
  89         arcpct: pct {
  90                 compatible = "snps,archs-pct";
  91                 interrupt-parent = <&cpu_intc>;
  92                 interrupts = <20>;
  93         };
  94
  95         /* TIMER0 with interrupt for clockevent */
  96         timer {
  97                 compatible = "snps,arc-timer";
  98                 interrupts = <16>;
  99                 interrupt-parent = <&cpu_intc>;
 100                 clocks = <&core_clk>;
 101         };
 102
 103         /* 64-bit Global Free Running Counter */
 104         gfrc {
 105                 compatible = "snps,archs-timer-gfrc";
 106                 clocks = <&core_clk>;
 107         };
 108
 109         soc {
 110                 compatible = "simple-bus";
 111                 #address-cells = <1>;
 112                 #size-cells = <1>;
 113                 interrupt-parent = <&idu_intc>;
 114
 115                 ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 116
 117                 cgu_rst: reset-controller@8a0 {
 118                         compatible = "snps,hsdk-reset";
 119                         #reset-cells = <1>;
 120                         reg = <0x8a0 0x4>, <0xff0 0x4>;
 121                 };
 122
 123                 core_clk: core-clk@0 {
 124                         compatible = "snps,hsdk-core-pll-clock";
 125                         reg = <0x00 0x10>, <0x14b8 0x4>;
 126                         #clock-cells = <0>;
 127                         clocks = <&input_clk>;
 128
 129                         /*
 130                          * Set initial core pll output frequency to 1GHz.
 131                          * It will be applied at the core pll driver probing
 132                          * on early boot.
 133                          */
 134                         assigned-clocks = <&core_clk>;
 135                         assigned-clock-rates = <1000000000>;
 136                 };
 137
 138                 serial: serial@5000 {
 139                         compatible = "snps,dw-apb-uart";
 140                         reg = <0x5000 0x100>;
 141                         clock-frequency = <33330000>;
 142                         interrupts = <6>;
 143                         baud = <115200>;
 144                         reg-shift = <2>;
 145                         reg-io-width = <4>;
 146                 };
 147
 148                 gmacclk: gmacclk {
 149                         compatible = "fixed-clock";
 150                         clock-frequency = <400000000>;
 151                         #clock-cells = <0>;
 152                 };
 153
 154                 mmcclk_ciu: mmcclk-ciu {
 155                         compatible = "fixed-clock";
 156                         /*
 157                          * DW sdio controller has external ciu clock divider
 158                          * controlled via register in SDIO IP. Due to its
 159                          * unexpected default value (it should divide by 1
 160                          * but it divides by 8) SDIO IP uses wrong clock and
 161                          * works unstable (see STAR 9001204800)
 162                          * We switched to the minimum possible value of the
 163                          * divisor (div-by-2) in HSDK platform code.
 164                          * So add temporary fix and change clock frequency
 165                          * to 50000000 Hz until we fix dw sdio driver itself.
 166                          */
 167                         clock-frequency = <50000000>;
 168                         #clock-cells = <0>;
 169                 };
 170
 171                 mmcclk_biu: mmcclk-biu {
 172                         compatible = "fixed-clock";
 173                         clock-frequency = <400000000>;
 174                         #clock-cells = <0>;
 175                 };
 176
 177                 gpu_core_clk: gpu-core-clk {
 178                         compatible = "fixed-clock";
 179                         clock-frequency = <400000000>;
 180                         #clock-cells = <0>;
 181                 };
 182
 183                 gpu_dma_clk: gpu-dma-clk {
 184                         compatible = "fixed-clock";
 185                         clock-frequency = <400000000>;
 186                         #clock-cells = <0>;
 187                 };
 188
 189                 gpu_cfg_clk: gpu-cfg-clk {
 190                         compatible = "fixed-clock";
 191                         clock-frequency = <200000000>;
 192                         #clock-cells = <0>;
 193                 };
 194
 195                 dmac_core_clk: dmac-core-clk {
 196                         compatible = "fixed-clock";
 197                         clock-frequency = <400000000>;
 198                         #clock-cells = <0>;
 199                 };
 200
 201                 dmac_cfg_clk: dmac-gpu-cfg-clk {
 202                         compatible = "fixed-clock";
 203                         clock-frequency = <200000000>;
 204                         #clock-cells = <0>;
 205                 };
 206
 207                 gmac: ethernet@8000 {
 208                         compatible = "snps,dwmac";
 209                         reg = <0x8000 0x2000>;
 210                         interrupts = <10>;
 211                         interrupt-names = "macirq";
 212                         phy-mode = "rgmii-id";
 213                         snps,pbl = <32>;
 214                         snps,multicast-filter-bins = <256>;
 215                         clocks = <&gmacclk>;
 216                         clock-names = "stmmaceth";
 217                         phy-handle = <&phy0>;
 218                         resets = <&cgu_rst HSDK_ETH_RESET>;
 219                         reset-names = "stmmaceth";
 220                         mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 221                         dma-coherent;
 222
 223                         tx-fifo-depth = <4096>;
 224                         rx-fifo-depth = <4096>;
 225
 226                         mdio {
 227                                 #address-cells = <1>;
 228                                 #size-cells = <0>;
 229                                 compatible = "snps,dwmac-mdio";
 230                                 phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 231                                         reg = <0>;
 232                                 };
 233                         };
 234                 };
 235
 236                 usb@60000 {
 237                         compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 238                         reg = <0x60000 0x100>;
 239                         interrupts = <15>;
 240                         resets = <&cgu_rst HSDK_USB_RESET>;
 241                         dma-coherent;
 242                 };
 243
 244                 usb@40000 {
 245                         compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 246                         reg = <0x40000 0x100>;
 247                         interrupts = <15>;
 248                         resets = <&cgu_rst HSDK_USB_RESET>;
 249                         dma-coherent;
 250                 };
 251
 252                 mmc@a000 {
 253                         compatible = "altr,socfpga-dw-mshc";
 254                         reg = <0xa000 0x400>;
 255                         num-slots = <1>;
 256                         fifo-depth = <16>;
 257                         card-detect-delay = <200>;
 258                         clocks = <&mmcclk_biu>, <&mmcclk_ciu>;
 259                         clock-names = "biu", "ciu";
 260                         interrupts = <12>;
 261                         bus-width = <4>;
 262                         dma-coherent;
 263                 };
 264
 265                 spi0: spi@20000 {
 266                         compatible = "snps,dw-apb-ssi";
 267                         reg = <0x20000 0x100>;
 268                         #address-cells = <1>;
 269                         #size-cells = <0>;
 270                         interrupts = <16>;
 271                         num-cs = <2>;
 272                         reg-io-width = <4>;
 273                         clocks = <&input_clk>;
 274                         cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
 275                                    <&creg_gpio 1 GPIO_ACTIVE_LOW>;
 276
 277                         flash@0 {
 278                                 compatible = "sst26wf016b", "jedec,spi-nor";
 279                                 reg = <0>;
 280                                 #address-cells = <1>;
 281                                 #size-cells = <1>;
 282                                 spi-max-frequency = <4000000>;
 283                         };
 284
 285                         adc@1 {
 286                                 compatible = "ti,adc108s102";
 287                                 reg = <1>;
 288                                 vref-supply = <&reg_5v0>;
 289                                 spi-max-frequency = <1000000>;
 290                         };
 291                 };
 292
 293                 creg_gpio: gpio@14b0 {
 294                         compatible = "snps,creg-gpio-hsdk";
 295                         reg = <0x14b0 0x4>;
 296                         gpio-controller;
 297                         #gpio-cells = <2>;
 298                         ngpios = <2>;
 299                 };
 300
 301                 gpio: gpio@3000 {
 302                         compatible = "snps,dw-apb-gpio";
 303                         reg = <0x3000 0x20>;
 304                         #address-cells = <1>;
 305                         #size-cells = <0>;
 306
 307                         gpio_port_a: gpio-controller@0 {
 308                                 compatible = "snps,dw-apb-gpio-port";
 309                                 gpio-controller;
 310                                 #gpio-cells = <2>;
 311                                 snps,nr-gpios = <24>;
 312                                 reg = <0>;
 313                         };
 314                 };
 315
 316                 gpu_3d: gpu@90000 {
 317                         compatible = "vivante,gc";
 318                         reg = <0x90000 0x4000>;
 319                         clocks = <&gpu_dma_clk>,
 320                                  <&gpu_cfg_clk>,
 321                                  <&gpu_core_clk>,
 322                                  <&gpu_core_clk>;
 323                         clock-names = "bus", "reg", "core", "shader";
 324                         interrupts = <28>;
 325                 };
 326
 327                 dmac: dmac@80000 {
 328                         compatible = "snps,axi-dma-1.01a";
 329                         reg = <0x80000 0x400>;
 330                         interrupts = <27>;
 331                         clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
 332                         clock-names = "core-clk", "cfgr-clk";
 333
 334                         dma-channels = <4>;
 335                         snps,dma-masters = <2>;
 336                         snps,data-width = <3>;
 337                         snps,block-size = <4096 4096 4096 4096>;
 338                         snps,priority = <0 1 2 3>;
 339                         snps,axi-max-burst-len = <16>;
 340                 };
 341         };
 342
 343         memory@80000000 {
 344                 #address-cells = <2>;
 345                 #size-cells = <2>;
 346                 device_type = "memory";
 347                 reg = <0x0 0x80000000 0x0 0x40000000>;  /* 1 GB lowmem */
 348                 /*     0x1 0x00000000 0x0 0x40000000>;     1 GB highmem */
 349         };
 350 };